Hi there,
Please help me. I have a Samsung Galaxy S4 I9505.
It was rooted and had custom rom installed with Kitkat 4.4. The custom rom was Echoe S5 Port.
I did a full backup of the system and rom before trying to install a different rom.
I attempted to install Albe95 LolliRom version 9.0. I followed all instructions and installed the Modems and bootloader.
Installed the rom, however after rebooting it hangs on the "Samsung Galaxy S4 I9505" screen. (not the Samsung logo screen)
So I decided to go back to my backup. Wiped data, cache etc and restored through TWRP. - Successful
Reboots fine, able to use the phone as normal, however the second reboot hangs on the "Samsung Galaxy S4 I9505" screen.
I even tried a fresh install of the Echoe S5 port rom and it does the same thing on the second reboot.
I can get into TWRP recovery fine.
All roms were used from this forum.
Let me know if there is any further information required.
Please advise a way forward to recover my phone, thanks.
Try a different bootloader would be my first suggestion.
GDReaper said:
Try a different bootloader would be my first suggestion.
Click to expand...
Click to collapse
Thanks, I will give that a try and provide feedback later.
DJPrish said:
Thanks, I will give that a try and provide feedback later.
Click to expand...
Click to collapse
No luck, tried various different bootloaders for my model.
I suggest flashing back to a completely stock ROM from sammobile.com and set up the phone to ensure that all functions are working. If everything is fine on a stock ROM, then I would flash TWRP and try to restore the backup.
audit13 said:
I suggest flashing back to a completely stock ROM from sammobile.com and set up the phone to ensure that all functions are working. If everything is fine on a stock ROM, then I would flash TWRP and try to restore the backup.
Click to expand...
Click to collapse
Just flashed back to stock ROM.
Still stuck on "Samsung Galaxy S4 I9505" screen.
I'm almost in same situation and it made me to ask you: Did you try to use Odin to flash the ROM?
After flashing a stock ROM with Odin, did you perform a factory wipe in stock recovery before booting the phone for the first time?
Related
Hello Everyone. I flashed the 4.3 Google Edition Rom and after about a day of use it crashed. I booted into TWRP and attempted to boot into the system to find that It would say the typical 'Samsung Galaxy S4 i9505 bla bla.' I then went back to TWRP and attempted to flash the backups of Stock TouchWiz via my 32gb SD Card (note my s4 is 16gb) and it would come up with failed and prompted me to wipe dalvic cache ect. Stressing out I went on to odin and flashed an Optus Carrier Stock Touchwiz Firmware. This did not work either making me still boot loop. I was however unrooted and did not have a custom recovery. And here we are now, I re-flashed root and TWRP attempting again to flash my backups and once again they fail on me.
Please. Any help would be highly appreciated. I currently have a phone with stock touchwiz (which doesnt boot), TWRP and Root flashed aswell. Thats It. Once again please. Ive checked plenty of other threads however they were all fixed some way or another.
Thanks for your Help Everyone..!:laugh:
Sanjaka9911 said:
Hello Everyone. I flashed the 4.3 Google Edition Rom and after about a day of use it crashed. I booted into TWRP and attempted to boot into the system to find that It would say the typical 'Samsung Galaxy S4 i9505 bla bla.' I then went back to TWRP and attempted to flash the backups of Stock TouchWiz via my 32gb SD Card (note my s4 is 16gb) and it would come up with failed and prompted me to wipe dalvic cache ect. Stressing out I went on to odin and flashed an Optus Carrier Stock Touchwiz Firmware. This did not work either making me still boot loop. I was however unrooted and did not have a custom recovery. And here we are now, I re-flashed root and TWRP attempting again to flash my backups and once again they fail on me.
Please. Any help would be highly appreciated. I currently have a phone with stock touchwiz (which doesnt boot), TWRP and Root flashed aswell. Thats It. Once again please. Ive checked plenty of other threads however they were all fixed some way or another.
Thanks for your Help Everyone..!:laugh:
Click to expand...
Click to collapse
just flash any original firmware via odin!
for example I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8
after that boot into stock recovery and wipe/delete data.
this should help.
also i wouldn't use any ge firmware until it's official released.
there are some bugs like you can't enter sim code or very heavy battery usage
good luck
if you've already tried standard ROM for i9505 and it did not helped - your bootloader was changed during the flash of Google ROM.
What do you need now: full ROM which would include bootloader, pit etc., and flash it with repartition.
P.S. ask any mod to move this thread to Q&A section, where it shall be...
DONE!
Guys, thanks for all your replies! I found a solution. I used an older version of odin and did a factory reset with the stock recovery. thx for all ur help again. I was just really stressed at the time so..! haha
Have the same problem with my Galaxy S4 Google Edition
I just bought a Google Ediion Galaxy S4 from the play store, and I followed the instructions in this thread (http://forum.xda-developers.com/showthread.php?t=2341162). And my phone is screwed, it is stuck with the black screen and the Google Logo in the background. I can get into download and recovery mode, but only when I take the battery out first then reboot it in either mode. Can anyone help me please?
Rekhter said:
I just bought a Google Ediion Galaxy S4 from the play store, and I followed the instructions in this thread (http://forum.xda-developers.com/showthread.php?t=2341162). And my phone is screwed, it is stuck with the black screen and the Google Logo in the background. I can get into download and recovery mode, but only when I take the battery out first then reboot it in either mode. Can anyone help me please?
Click to expand...
Click to collapse
Go in recovery mode and clear the caches and optionaly do a data factory reset.
Please search the forums first for a solution to your problem ,there is plenty of bootloop threads.
gee2012 said:
Go in recovery mode and clear the caches and optionaly do a data factory reset.
Click to expand...
Click to collapse
I already did that, and it did not work, also I did search through the boot loop sections in the forum and I could not find good solutions, if any of you can direct me to a certain thread I would highly appreciate it.
I dunno what went wrong here...
1) I have GT-I9505 (SSN: -I9505GSMH). I installed Galaxy S4 toolkit
2) Reboot into download mode. Used toolkit/Odin to root phone. Boots up. See SU.
3) Reboot into download mode. Used toolkit/Odin. Flashed TWRP Recovery
4) Phone boots up normal. Reboot into TWRP recovery. Did a factory Reset. Format.
5) Installed Zip (Latest Omega 9.0 ROM), unchecked the things I didn't want to install. Completed install, no errors reported. Rebooted.
6) Phone stuck on Samsung boot screen. I left it overnight thinking sometimes it may take 15 mins to boot system after new install.
7) Woke up, battery dead. Tried to charge phone. No charging indicators when plugged in. With whatever juice I had left I booted into TWRP recovery, it starts to charge again as I see the % batter increase after 5 mins.
-=-=-=-=- Did the Following to try to repair
a) Reinstalled Omega, this time leaving alll options on. Rebooted, stuck in Samsung boot
b) Flashed Phil CWM touch recovery, did complete wipe to install new ROM. Rebooted into Phil recovery. Flashed OMEGA. Reboot, stuck in Samsung boot.
c) Rebooted into Phil recovery, installed echo ROM, rebooted. Black screen. Rebooted into Phil. This time cannot get into recovery.
d) Started panicking, used Odin flashed TWRP. Would not flash. Something displayed about PIT error. Flashed Phil again. Reboot into recovery, WORKS! (recovery only). Went back into Download mode flashed TWRP. Rebooted, also WORKS!. Did a factory wipe. During wipe there was an error. Format, factory reset, error during wipe. Flashed OMEGA. Reboot. Stuck on samsung boot loop.
e) Downloaded official Samsung kernal for i9505 thinking it was the full flash rom. Flashed with ODIN (hoping to put everything back to factory). Completed flash, phone boots. I get OMEGA ANIMATION!!! Waited for 15 mins. Stuck on Animation. Reflashed TWRP. Rebooted, installed OMEGA...again. Stuck on samsung boot screen.
-=-=-= Kinda frustrated. What did I do wrong in the beginning?
There are so many official roms for the S4 based on region. What can I do to put it back to factory again? I purchased phone in Australia @ Samsung store. I figured download the Australia ROM but there are like 5 of them 4 being network branded roms I think. THe other one XSA is unbranded?
I tried searching for help but so far nothing works.
omega ROM or any other custom ROM uses single CSC so before booting into system you must boot into stock recovery to apply CSC of that ROM, download stock recovery of that firmware the ROM was built from
after applying CSC it will work if not flash Omega 9.0 again , it will work :good::good:
arnob_xperia said:
omega ROM or any other custom ROM uses single CSC so before booting into system you must boot into stock recovery to apply CSC of that ROM, download stock recovery of that firmware the ROM was built from
after applying CSC it will work if not flash Omega 9.0 again , it will work :good::good:
Click to expand...
Click to collapse
Thanks for responding
So I take it when I did the full factory wipe and FORMAT the formatting part erased the CSC?
The steps are:
1) Find stock recovery of the original ROM OMEGA was built on. Use odin, flash that specific recovery. ( I might as well do a complete flash of the original stock firmware)
2) Use odin, replace recovery with TWRP, flash Omega this time no formatting
Reboot should be ok?
kabloomz said:
Thanks for responding
So I take it when I did the full factory wipe and FORMAT the formatting part erased the CSC?
The steps are:
1) Find stock recovery of the original ROM OMEGA was built on. Use odin, flash that specific recovery. ( I might as well do a complete flash of the original stock firmware)
2) Use odin, replace recovery with TWRP, flash Omega this time no formatting
Reboot should be ok?
Click to expand...
Click to collapse
first use CWM or TWRP or whatever you want and format everthing
flash a fresh firmware(latest i prefer)
then flash stock recovery via odin of the built version what v9 was used, simply reboot to recovery and it will say MULTI CSC APPLIED from fresh frimware you used
then flash TWRP/CWM and flash v9
again simply reboot to recovery and it will say MULTI CSC APPLIED from V9
it will reboot, you must need to apply CSC to boot your phone
I can confirm this!
I was trying to flash Omega 9 on top of jamal's 4.3 and my phone always booted to recovery. So I restored my stock touchwiz (no custom recovery or even root) nandroid backup and applied Omega 9: it worked!
douglascamata said:
I was trying to flash Omega 9 on top of jamal's 4.3 and my phone always booted to recovery. So I restored my stock touchwiz (no custom recovery or even root) nandroid backup and applied Omega 9: it worked!
Click to expand...
Click to collapse
thats right stock recovery boot is needed to apply CSC
problem
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
macoy_412 said:
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
Click to expand...
Click to collapse
Do you have an IMEI showing on your phone? What recovery did you use to flash Omega?
It matters, because some recoveries will screw it up.
Do you try to install with Philz recovery?
Sent from my GT-I9505 using xda premium
macoy_412 said:
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
Click to expand...
Click to collapse
At this point I think it is the CSC issue arnob-xperia mentioned.
This is how I corrected my issue.
1) Omega v10 uses newer base FW. In their description it tells u. (ex: ver 9 uses XUBMG5). Search on the i9505 forums here. I can't link for some reason I can't see any of the stickied threads, especially the one listing all avail stock firmwares.
Flash into Philz or TWRP do a complete wipe of everything including data. etc.
You MUST download the full firmware, Not just the smaller kernel and recovery or csc. The full stock fw is usually over 1.6 GB. Anything around that range and u got the right one for Odin flash with the md5. Use Odin to flash. I used 1.85 and it was fine.
2) Once done it will reboot and in theory you are stock everything. At this point, for me somehow the phone got stuck in fricken boot loop. I pulled out battery, reboot into stock recovery and made sure I saw the multicsc. Rebooted. Still boot loop.
After hours of doing all sorts of things and putting the phone aside for a day. Came back, flashed the stock fw again using Odin. Reboot into recovery. Check the multi csc. Reboot. Stuck in boot loop. Reboot to download mode. Then I decided to ROOT the phone for ****s and giggles. This worked!
Phone booted.
3) Now you have stock (for that specific OMEGA fw) w/ the matching CSC. From here on follow OMEGA flash instructions for the specific things it tells u to wipe. DO NOT DO A FULL WIPE/FORMAT like I did (what got me in the mess to begin with).
** For Galaxy S3s, S4s, for some reason I've always had problems with TWRP. I had better luck using Philz. Everyone's personal experience varies on this one.
** I think the problem has to do with the CSC which handles specific region phone and carrier modes. This doesn't mean that it won't work if you use a diff region CSC. Just that it has to match the FW base you are using otherwise you have all sorts of problems. After that you can go in android and setup your APNs etc if you have probs with data. I didn't have this problem and was testing using the UK fw base on AU network sim.
*** Why does Samsung make things so damn complicated. I remember way back in 2k3 using fricken ODIN (samsung flashing utitility) to flash **** and it was the same setup as now. This whole crap about CSC pairing is a bit annoying. It is bad enough there are 6+ variations of S4s lol...
Hope this helps.
wifi problem
kabloomz said:
At this point I think it is the CSC issue arnob-xperia mentioned.
This is how I corrected my issue.
1) Omega v10 uses newer base FW. In their description it tells u. (ex: ver 9 uses XUBMG5). Search on the i9505 forums here. I can't link for some reason I can't see any of the stickied threads, especially the one listing all avail stock firmwares.
Flash into Philz or TWRP do a complete wipe of everything including data. etc.
You MUST download the full firmware, Not just the smaller kernel and recovery or csc. The full stock fw is usually over 1.6 GB. Anything around that range and u got the right one for Odin flash with the md5. Use Odin to flash. I used 1.85 and it was fine.
2) Once done it will reboot and in theory you are stock everything. At this point, for me somehow the phone got stuck in fricken boot loop. I pulled out battery, reboot into stock recovery and made sure I saw the multicsc. Rebooted. Still boot loop.
After hours of doing all sorts of things and putting the phone aside for a day. Came back, flashed the stock fw again using Odin. Reboot into recovery. Check the multi csc. Reboot. Stuck in boot loop. Reboot to download mode. Then I decided to ROOT the phone for ****s and giggles. This worked!
Phone booted.
3) Now you have stock (for that specific OMEGA fw) w/ the matching CSC. From here on follow OMEGA flash instructions for the specific things it tells u to wipe. DO NOT DO A FULL WIPE/FORMAT like I did (what got me in the mess to begin with).
** For Galaxy S3s, S4s, for some reason I've always had problems with TWRP. I had better luck using Philz. Everyone's personal experience varies on this one.
** I think the problem has to do with the CSC which handles specific region phone and carrier modes. This doesn't mean that it won't work if you use a diff region CSC. Just that it has to match the FW base you are using otherwise you have all sorts of problems. After that you can go in android and setup your APNs etc if you have probs with data. I didn't have this problem and was testing using the UK fw base on AU network sim.
*** Why does Samsung make things so damn complicated. I remember way back in 2k3 using fricken ODIN (samsung flashing utitility) to flash **** and it was the same setup as now. This whole crap about CSC pairing is a bit annoying. It is bad enough there are 6+ variations of S4s lol...
Hope this helps.
Click to expand...
Click to collapse
I did flash the Omega v9.1 and applied the wifi fix but the wifi is still broken. I tried unrooting it by flashing the original rom and formatting the data but the wifi is still broken. I can't turn it on. Thanks for the instructions anyways. ))
no pit partition
also, when i tried to root it again, it fails and says there is no PIT partition..
Where is the csc in TWRP so I can so what ones on the phone..??
What stock firmware can I use for a Orange Network in the UK.
GT-i9505 stuck on boot when upgraded from omega v16 to v21
Hello guys,
Well, I followed all the instructions and flashed new bootloader and new modem and after that I installed omega v21 with Full swipe. After that I ended up stuck in boot animation. :s What to do? I already tried to re-flash modem and bootloader, updated CWM and tried to re-install that v21 and after that I flashed twrp over cwm and tried to re-install v21 but always I ended up stuck in that boot animation. :S All installs were successful, but it just wont boot.
What to do?
Hopefully you understand my problem.
Cheers from Finland!
Nico
EDIT:
Ok, I flashed omega rom v19 with full wipe and tried to boot. Didnt work, but then I installed Kies to my computer, opened Kies, Plugged USB in and started my phone and then Kaboom! It booted. What exactly happened there?
BizK1d said:
Hello guys,
Well, I followed all the instructions and flashed new bootloader and new modem and after that I installed omega v21 with Full swipe. After that I ended up stuck in boot animation. :s What to do? I already tried to re-flash modem and bootloader, updated CWM and tried to re-install that v21 and after that I flashed twrp over cwm and tried to re-install v21 but always I ended up stuck in that boot animation. :S All installs were successful, but it just wont boot.
What to do?
Hopefully you understand my problem.
Cheers from Finland!
Nico
EDIT:
Ok, I flashed omega rom v19 with full wipe and tried to boot. Didnt work, but then I installed Kies to my computer, opened Kies, Plugged USB in and started my phone and then Kaboom! It booted. What exactly happened there?
Click to expand...
Click to collapse
Hi, I am having the same problem. First I installed the new firmware (NA5) and modem, tested it with the Omega ROM v21 and boot caught on so now tested the rom Fox Hound 4.1 and am having the same problem.
Kies tested this option but have not had the same luck as you. = /
Anyone know the reason? The rom Google Edition Jamal runs on my phone.
i9505
Hello All,
I am new to flashing your rom and all that.
i have flashed my 1st rom(stock google) went to boot loop.
reflashed it few times, nothing. then flashed one from omega. that worked. so i tried others, but all of them go to boot loop. please help me.
my phone is Samsung Galaxy s4 GT i9505.
i was trying to flash 4.2.2 and 4.3
some of the ones i did :
Omega v2.0 Android 4.3
http://forum.xda-developers.com/show....php?t=2253528
this worked 1st time, but did not work after.
Google Edition 4.3
http://forum.xda-developers.com/show....php?t=2395030
did not work.
FoxHound 1.6 and 1.7
http://forum.xda-developers.com/show....php?t=2303239
both didnt work.
i have used both TW and CWM recovery programs
Installs were all clean...
Just Anton said:
Hello All,
I am new to flashing your rom and all that.
i have flashed my 1st rom(stock google) went to boot loop.
reflashed it few times, nothing. then flashed one from omega. that worked. so i tried others, but all of them go to boot loop. please help me.
my phone is Samsung Galaxy s4 GT i9505.
i was trying to flash 4.2.2 and 4.3
some of the ones i did :
Omega v2.0 Android 4.3
http://forum.xda-developers.com/show....php?t=2253528
this worked 1st time, but did not work after.
Google Edition 4.3
http://forum.xda-developers.com/show....php?t=2395030
did not work.
FoxHound 1.6 and 1.7
http://forum.xda-developers.com/show....php?t=2303239
both didnt work.
i have used both TW and CWM recovery programs
Installs were all clean...
Click to expand...
Click to collapse
also i have deleted cache and dalvic cashe after. still stuck at galaxy s4 screen
Which carrier or make of the s4 do you have?
Just Anton said:
also i have deleted cache and dalvic cashe after. still stuck at galaxy s4 screen
Click to expand...
Click to collapse
You need to wipe data, system, and the caches before you flash the rom.
jd1639 said:
You need to wipe data, system, and the caches before you flash the rom.
Click to expand...
Click to collapse
i did that too
Bigbabyjesus said:
Which carrier or make of the s4 do you have?
Click to expand...
Click to collapse
Samsung Galaxy s4 GT i9505 T mobile(UK)
After you flash/install a stock fw or a custom rom, you should do a factory reset and ur bootloop will go away.
norml said:
After you flash/install a stock fw or a custom rom, you should do a factory reset and ur bootloop will go away.
Click to expand...
Click to collapse
hello, i have done this also. still there
it still gets stuck at Samsung screen
bump
Well, I'm not positive about that variant but if the bootloader is locked you would need a rom or kernel with loki or you would need a custom recovery with auto-loki. If you look at the kernel you flash instead of boot.img in the zip it will be boot.lok. Not sure if this is the case for your phone but you should look into it if you haven't already.
You probably also have a bad download..please check your download rom md5 make sure they're matching ..if not re-download ..
Hi,
Earlier today I was trying to install the 4.3 omega rom (GE), so I went into recovery and accidently wiped the data before I installed the rom. I am not sure what caused the issue my phone is just stuck on the S4 boot screen.
I tried reinstalling the previous rom (Omega 4.2.2) and it made no difference. I have TWRP recovery and I can get into recovery fine. I noticed that I cannot factory reset from TWRP and it says E/data cannot be mount, reset failed.
I am not sure what to do and how to fix my phone I tried to look for e/data issue but I cannot find much on that issue and I am noobie to this so I cannot understand some processes that are mentioned. I tried not to mess around too much after I realised its stuck.
Please help!
S4 9505
Was on Omega 4.2.2
Adams 1.6 kernel
Manthan Harsad said:
Hi,
Earlier today I was trying to install the 4.3 omega rom (GE), so I went into recovery and accidently wiped the data before I installed the rom. I am not sure what caused the issue my phone is just stuck on the S4 boot screen.
I tried reinstalling the previous rom (Omega 4.2.2) and it made no difference. I have TWRP recovery and I can get into recovery fine. I noticed that I cannot factory reset from TWRP and it says E/data cannot be mount, reset failed.
I am not sure what to do and how to fix my phone I tried to look for e/data issue but I cannot find much on that issue and I am noobie to this so I cannot understand some processes that are mentioned. I tried not to mess around too much after I realised its stuck.
Please help!
S4 9505
Was on Omega 4.2.2
Adams 1.6 kernel
Click to expand...
Click to collapse
try flashing back stock rom via odin
dannyella said:
try flashing back stock rom via odin
Click to expand...
Click to collapse
Thanks I will try that now, takes long to download the stock rom. I will report back if success.
I just did a stock firmware install through odin, now my phone is stuck on logo! Help!
Edit: I did some research and rebooted the phone on stock recovery, did a factory reset and restarted. It solved the issue and mine is back to life and working! Thank you for all your help!
Manthan Harsad said:
I just did a stock firmware install through odin, now my phone is stuck on logo! Help!
Click to expand...
Click to collapse
did it flash successfully in odin..did it say "Pass"??
Hi there.
I have a Samsung Galaxy S4 GT-I9505 and I’m using TWRP Recovery 6.0.4.4.
I tried to flash a nightly-version of CyanogenMod (cm-10.2-20131101-NIGHTLY-jfltexx.zip). I did a Factory Reset before flashing, TWRP said it had been successful.
When I tried to boot my phone, I can see the "SAMSUNG GALAXY S4 GT-I9505" logo, here it got stuck. I can not see the cyanogen boot animation.
Though MD5 hashes and file sizes are ok, I tried another ROM: SuperNexus http://forum.xda-developers.com/showthread.php?t=2407616
Here it was exactly the same. My device gets stuck even before the boot animation.
I was so desperate, that I tried to format my complete internal storage. Flashing the ROMs was successful again, I could boot both ROMs CM and Supernexus then. But after I turned off my device I can't boot any more. Again I can not see the boot animation.
I have already tried it with PhilZ and CWM. I flashed them using my current recovery.
Any advice?
I am sorry for my English, if you need more detailed explanation, please ask. I tried to describe everything as detailed as I can.
Can you get into download mode? You may have to flash a stock ROM to get it to working again. Was the phone previously rooted?
And are you currently on a stock ROM or coming from a custom ROM?
Yeah, I can get into Download mode.
Well, I am not sure what ROM I'm currently using since I wiped everything. Previously I had FoxHound ROM, samsung-based pre-rooted custom ROM.
Have you tried flashing a custom Kernel?
Sounds like what I had when I tried to flash a TW Kernel for a AOSP ROM.
If you can't get into recovery, go into download mode and flash the latest CWM. Got my phone working.
FoxHound ROM installed a custom Kernel, "Ausdim Kernel" I think.
Now I have CWM 6.0.3.2 from here: http://forum.xda-developers.com/showthread.php?t=2279579
Not sure if this is the latest version ... I can't find an Odin-flashable *.tar
Anyway it doesn't work too. This recovery can't even flash CM, it gets stuck at "opening update package ..."
Sorry its a bit late.
http://forum.xda-developers.com/showpost.php?p=46312260&postcount=149
Use them. This may help as a tutorial to follow loosely but that was for non working WiFi.
http://forum.xda-developers.com/showpost.php?p=47076192&postcount=6