I dunno what went wrong here...
1) I have GT-I9505 (SSN: -I9505GSMH). I installed Galaxy S4 toolkit
2) Reboot into download mode. Used toolkit/Odin to root phone. Boots up. See SU.
3) Reboot into download mode. Used toolkit/Odin. Flashed TWRP Recovery
4) Phone boots up normal. Reboot into TWRP recovery. Did a factory Reset. Format.
5) Installed Zip (Latest Omega 9.0 ROM), unchecked the things I didn't want to install. Completed install, no errors reported. Rebooted.
6) Phone stuck on Samsung boot screen. I left it overnight thinking sometimes it may take 15 mins to boot system after new install.
7) Woke up, battery dead. Tried to charge phone. No charging indicators when plugged in. With whatever juice I had left I booted into TWRP recovery, it starts to charge again as I see the % batter increase after 5 mins.
-=-=-=-=- Did the Following to try to repair
a) Reinstalled Omega, this time leaving alll options on. Rebooted, stuck in Samsung boot
b) Flashed Phil CWM touch recovery, did complete wipe to install new ROM. Rebooted into Phil recovery. Flashed OMEGA. Reboot, stuck in Samsung boot.
c) Rebooted into Phil recovery, installed echo ROM, rebooted. Black screen. Rebooted into Phil. This time cannot get into recovery.
d) Started panicking, used Odin flashed TWRP. Would not flash. Something displayed about PIT error. Flashed Phil again. Reboot into recovery, WORKS! (recovery only). Went back into Download mode flashed TWRP. Rebooted, also WORKS!. Did a factory wipe. During wipe there was an error. Format, factory reset, error during wipe. Flashed OMEGA. Reboot. Stuck on samsung boot loop.
e) Downloaded official Samsung kernal for i9505 thinking it was the full flash rom. Flashed with ODIN (hoping to put everything back to factory). Completed flash, phone boots. I get OMEGA ANIMATION!!! Waited for 15 mins. Stuck on Animation. Reflashed TWRP. Rebooted, installed OMEGA...again. Stuck on samsung boot screen.
-=-=-= Kinda frustrated. What did I do wrong in the beginning?
There are so many official roms for the S4 based on region. What can I do to put it back to factory again? I purchased phone in Australia @ Samsung store. I figured download the Australia ROM but there are like 5 of them 4 being network branded roms I think. THe other one XSA is unbranded?
I tried searching for help but so far nothing works.
omega ROM or any other custom ROM uses single CSC so before booting into system you must boot into stock recovery to apply CSC of that ROM, download stock recovery of that firmware the ROM was built from
after applying CSC it will work if not flash Omega 9.0 again , it will work :good::good:
arnob_xperia said:
omega ROM or any other custom ROM uses single CSC so before booting into system you must boot into stock recovery to apply CSC of that ROM, download stock recovery of that firmware the ROM was built from
after applying CSC it will work if not flash Omega 9.0 again , it will work :good::good:
Click to expand...
Click to collapse
Thanks for responding
So I take it when I did the full factory wipe and FORMAT the formatting part erased the CSC?
The steps are:
1) Find stock recovery of the original ROM OMEGA was built on. Use odin, flash that specific recovery. ( I might as well do a complete flash of the original stock firmware)
2) Use odin, replace recovery with TWRP, flash Omega this time no formatting
Reboot should be ok?
kabloomz said:
Thanks for responding
So I take it when I did the full factory wipe and FORMAT the formatting part erased the CSC?
The steps are:
1) Find stock recovery of the original ROM OMEGA was built on. Use odin, flash that specific recovery. ( I might as well do a complete flash of the original stock firmware)
2) Use odin, replace recovery with TWRP, flash Omega this time no formatting
Reboot should be ok?
Click to expand...
Click to collapse
first use CWM or TWRP or whatever you want and format everthing
flash a fresh firmware(latest i prefer)
then flash stock recovery via odin of the built version what v9 was used, simply reboot to recovery and it will say MULTI CSC APPLIED from fresh frimware you used
then flash TWRP/CWM and flash v9
again simply reboot to recovery and it will say MULTI CSC APPLIED from V9
it will reboot, you must need to apply CSC to boot your phone
I can confirm this!
I was trying to flash Omega 9 on top of jamal's 4.3 and my phone always booted to recovery. So I restored my stock touchwiz (no custom recovery or even root) nandroid backup and applied Omega 9: it worked!
douglascamata said:
I was trying to flash Omega 9 on top of jamal's 4.3 and my phone always booted to recovery. So I restored my stock touchwiz (no custom recovery or even root) nandroid backup and applied Omega 9: it worked!
Click to expand...
Click to collapse
thats right stock recovery boot is needed to apply CSC
problem
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
macoy_412 said:
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
Click to expand...
Click to collapse
Do you have an IMEI showing on your phone? What recovery did you use to flash Omega?
It matters, because some recoveries will screw it up.
Do you try to install with Philz recovery?
Sent from my GT-I9505 using xda premium
macoy_412 said:
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
Click to expand...
Click to collapse
At this point I think it is the CSC issue arnob-xperia mentioned.
This is how I corrected my issue.
1) Omega v10 uses newer base FW. In their description it tells u. (ex: ver 9 uses XUBMG5). Search on the i9505 forums here. I can't link for some reason I can't see any of the stickied threads, especially the one listing all avail stock firmwares.
Flash into Philz or TWRP do a complete wipe of everything including data. etc.
You MUST download the full firmware, Not just the smaller kernel and recovery or csc. The full stock fw is usually over 1.6 GB. Anything around that range and u got the right one for Odin flash with the md5. Use Odin to flash. I used 1.85 and it was fine.
2) Once done it will reboot and in theory you are stock everything. At this point, for me somehow the phone got stuck in fricken boot loop. I pulled out battery, reboot into stock recovery and made sure I saw the multicsc. Rebooted. Still boot loop.
After hours of doing all sorts of things and putting the phone aside for a day. Came back, flashed the stock fw again using Odin. Reboot into recovery. Check the multi csc. Reboot. Stuck in boot loop. Reboot to download mode. Then I decided to ROOT the phone for ****s and giggles. This worked!
Phone booted.
3) Now you have stock (for that specific OMEGA fw) w/ the matching CSC. From here on follow OMEGA flash instructions for the specific things it tells u to wipe. DO NOT DO A FULL WIPE/FORMAT like I did (what got me in the mess to begin with).
** For Galaxy S3s, S4s, for some reason I've always had problems with TWRP. I had better luck using Philz. Everyone's personal experience varies on this one.
** I think the problem has to do with the CSC which handles specific region phone and carrier modes. This doesn't mean that it won't work if you use a diff region CSC. Just that it has to match the FW base you are using otherwise you have all sorts of problems. After that you can go in android and setup your APNs etc if you have probs with data. I didn't have this problem and was testing using the UK fw base on AU network sim.
*** Why does Samsung make things so damn complicated. I remember way back in 2k3 using fricken ODIN (samsung flashing utitility) to flash **** and it was the same setup as now. This whole crap about CSC pairing is a bit annoying. It is bad enough there are 6+ variations of S4s lol...
Hope this helps.
wifi problem
kabloomz said:
At this point I think it is the CSC issue arnob-xperia mentioned.
This is how I corrected my issue.
1) Omega v10 uses newer base FW. In their description it tells u. (ex: ver 9 uses XUBMG5). Search on the i9505 forums here. I can't link for some reason I can't see any of the stickied threads, especially the one listing all avail stock firmwares.
Flash into Philz or TWRP do a complete wipe of everything including data. etc.
You MUST download the full firmware, Not just the smaller kernel and recovery or csc. The full stock fw is usually over 1.6 GB. Anything around that range and u got the right one for Odin flash with the md5. Use Odin to flash. I used 1.85 and it was fine.
2) Once done it will reboot and in theory you are stock everything. At this point, for me somehow the phone got stuck in fricken boot loop. I pulled out battery, reboot into stock recovery and made sure I saw the multicsc. Rebooted. Still boot loop.
After hours of doing all sorts of things and putting the phone aside for a day. Came back, flashed the stock fw again using Odin. Reboot into recovery. Check the multi csc. Reboot. Stuck in boot loop. Reboot to download mode. Then I decided to ROOT the phone for ****s and giggles. This worked!
Phone booted.
3) Now you have stock (for that specific OMEGA fw) w/ the matching CSC. From here on follow OMEGA flash instructions for the specific things it tells u to wipe. DO NOT DO A FULL WIPE/FORMAT like I did (what got me in the mess to begin with).
** For Galaxy S3s, S4s, for some reason I've always had problems with TWRP. I had better luck using Philz. Everyone's personal experience varies on this one.
** I think the problem has to do with the CSC which handles specific region phone and carrier modes. This doesn't mean that it won't work if you use a diff region CSC. Just that it has to match the FW base you are using otherwise you have all sorts of problems. After that you can go in android and setup your APNs etc if you have probs with data. I didn't have this problem and was testing using the UK fw base on AU network sim.
*** Why does Samsung make things so damn complicated. I remember way back in 2k3 using fricken ODIN (samsung flashing utitility) to flash **** and it was the same setup as now. This whole crap about CSC pairing is a bit annoying. It is bad enough there are 6+ variations of S4s lol...
Hope this helps.
Click to expand...
Click to collapse
I did flash the Omega v9.1 and applied the wifi fix but the wifi is still broken. I tried unrooting it by flashing the original rom and formatting the data but the wifi is still broken. I can't turn it on. Thanks for the instructions anyways. ))
no pit partition
also, when i tried to root it again, it fails and says there is no PIT partition..
Where is the csc in TWRP so I can so what ones on the phone..??
What stock firmware can I use for a Orange Network in the UK.
GT-i9505 stuck on boot when upgraded from omega v16 to v21
Hello guys,
Well, I followed all the instructions and flashed new bootloader and new modem and after that I installed omega v21 with Full swipe. After that I ended up stuck in boot animation. :s What to do? I already tried to re-flash modem and bootloader, updated CWM and tried to re-install that v21 and after that I flashed twrp over cwm and tried to re-install v21 but always I ended up stuck in that boot animation. :S All installs were successful, but it just wont boot.
What to do?
Hopefully you understand my problem.
Cheers from Finland!
Nico
EDIT:
Ok, I flashed omega rom v19 with full wipe and tried to boot. Didnt work, but then I installed Kies to my computer, opened Kies, Plugged USB in and started my phone and then Kaboom! It booted. What exactly happened there?
BizK1d said:
Hello guys,
Well, I followed all the instructions and flashed new bootloader and new modem and after that I installed omega v21 with Full swipe. After that I ended up stuck in boot animation. :s What to do? I already tried to re-flash modem and bootloader, updated CWM and tried to re-install that v21 and after that I flashed twrp over cwm and tried to re-install v21 but always I ended up stuck in that boot animation. :S All installs were successful, but it just wont boot.
What to do?
Hopefully you understand my problem.
Cheers from Finland!
Nico
EDIT:
Ok, I flashed omega rom v19 with full wipe and tried to boot. Didnt work, but then I installed Kies to my computer, opened Kies, Plugged USB in and started my phone and then Kaboom! It booted. What exactly happened there?
Click to expand...
Click to collapse
Hi, I am having the same problem. First I installed the new firmware (NA5) and modem, tested it with the Omega ROM v21 and boot caught on so now tested the rom Fox Hound 4.1 and am having the same problem.
Kies tested this option but have not had the same luck as you. = /
Anyone know the reason? The rom Google Edition Jamal runs on my phone.
i9505
Related
I'm not sure why i can't get it working but i was flashing back to stock rom. I have the correct rom and everything flashes fine on odin. I am unable to reboot to recovery. it says its loading and goes to black screen, and tries to boot to OS again. I tried flashing twrp with odin and same thing. I flashed the stock rom multiple times and it just won't boot. I even used Kies to flash it to stock rom and it was successful however stuck at boot logo again. The one thing i didnt do was wipe data/cache etc before flashing to stock rom but every tutorial i seen doesnt state to do it before the flash anyway. Has anyone ran into this problem before?
How are you able to get into download mode to flash rom but not be able to go into recovery? I had this issue once with my note 2 and went into recovery and wiped data and rebooted successfully....
Alright... where to begin? Lets start at what happened around yesterday. Prior to the whole weekend, I had CyanogenMod 10.1 installed on my rooted S4. Come Friday, I start to miss some of the stock Samsung features such as Air Gestures, Smart Stay, the stock Samsung camera, and all that. So, I install WanamLite (a custom rom) on my phone. It's good and all but for some reason, the Smart Stay isn't working. To fix this, I go online and start digging; I find people saying "yo, revert back to the original firmware and re-install the Rom, that should fix your LTE problem." I think to myself, "maybe this could help me too." And that's exactly what I do. I go online to SamMobile and download this ROM (http://www.sammobile.com/firmwares/?page=1&model=SGH-M919V&pcode=0#firmware). It installs with Odin and I was able to get back to the Stock Samsung firmware. I then proceed with my plan and install WanamLite; that also worked. So I'm all happy and stuff 'cause Smart Stay finally works but, shortly after fiddling with the re-stocked device, I get bored again. So, I start searching the forums for another rom to replace WanamLite (it was a good rom, but I wanted to try something else before settling down on it).
I find this ROM in the XDA-Developers S4 forum: http://forum.xda-developers.com/showthread.php?t=2303239. I try installing it; it works fine. But then, I notice that half my SD card is used up. So, I go into TWRP and click on Format Data (I'm not too sure about the name, I had CWM prior to the re-installation of Samsung stock firmware). After resetting the Data, I boot back into the phone and notice that the default layout is Easy Mode. (On the bright side, I freed 4 GB from my SD card). Easy Mode's incredibly annoying, so I wrestle with the phone for a while to change the launcher to Nova launcher, but to no avail. In the end, I decide to reflash the FoxHound ROM. I place the rom on my phone and boot into TWRP. That's where the problem comes. I selected: wipe cache, wipe delvic cache, wipe data. Then I wiped the cache and data, flashed the rom and, after that is when the phone started refusing boot up. From then on, it just displayed Samsung Galaxy S4 logo on the screen whenever I tried to start it.
What I tried to fix the issue: Re-installing the stock samsung firmware. (I think I ended up screwing up the phone even more with this. Before, I had TWRP installed but I couldn't boot into it, now I don't have any custom recovery installed and I still can't boot into the phone).
I can access the Download Mode and use Odin. I cannot boot into the recovery. When I hold Volume Up + Power + Home, it just says recovery in blue above the logo, and then, the phone reboots.
So, any ideas on how to fix it?
TL;DR: Tried installing FoxHound Rom. I wiped Delvic Cache, Cache, and Data, and after flashing the rom, the phone refused to boot up; it gets stuck on the Samsung logo. Before flashing, I did Format Data. After being unable to boot into the phone, I tried to flash the Stock Samsung Firmware on my S4. Nothing worked. Any ideas on how I should proceed?
splitinferno said:
So, any ideas on how to fix it?
Click to expand...
Click to collapse
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
psycovirus said:
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
Click to expand...
Click to collapse
I've already tried flashing the Stock Samsung Firmware using Odin, it didn't work. Also, I'm having no luck with Kies; it won't connect. Any other suggestions? :/
EDIT 1: Okay, so here's the deal right now: I was able to flash TWRP using ODIN. This granted me access to my recovery, somehow. So right now, I have the FoxHound_GearEngine0.2 ROM installation files on my SD card and I am booted into the recovery. What should I do? Should I try flashing again? For now, I'll just wait for a response.
EDIT 2: Out of curiosity and impatience, I tried flashing FoxHound but got an error:
Updating Partition Details
E: unable to mount data
E: unable to mount internal storage
TWRP v. 2.5.0.3
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
maazali said:
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
Click to expand...
Click to collapse
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
UNBRICKED
splitinferno said:
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
Click to expand...
Click to collapse
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Hahah nice job
Sent from my GT-I9505 using xda premium
splitinferno said:
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Click to expand...
Click to collapse
Next time don't wipe data in custom recovery because it will corrupt your data which would most probably end with not booting past the Samsung logo, if you want to wipe in a custom recovery for now you have to manually wipe system, cache and dalvik cache located in mounts in cwm recovery (not sure where to find it in twrp).
You should read a little before messing with things in recovery.
Ahahah that's funny because something similar happened to me. And I was going to suggest doing a factory reset via recovery because that's how I resolved my problem, then I see you did just that! (Y)
Sent from my GT-I9500
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.
My N900 got bricked and it cannot get pass the Samsung's boot logo (the static one, not the animation one).
- I had been using rom cook alba19986's UltraLite XXUENI1 on my rooted Note 3 before, all things work perfectly.
- Then I flash kernel Halaszk v0.20 beta, but Synapse didn't work ("No UCI support"), so I flash kernel Halaszk v0.17 in recovery mode. And that's it, the problem occurred.
- Then I got stuck in bootscreen, it went to "Samsung Galaxy Note 3" boot logo and stopped there, I waited but nothing was gonna happen.
- I came back to Recovery Mode, did a full wipe/factory reset, wiped cache, davik cache. But it's no uses.
- I freaked out, so I re-flash Dr.Ketan's K14 rom, TR-ROM T22, alba19986's rom (Full wipe) successfully, but the bootloop happened: the phone continuously rebooted nonstop.
- I tried to flash stock kernel, stock modem in Dr.Ketan's rom (by his MultiTools), but it didn't help.
- Then I downloaded Note 3's stock roms (from SamMobile), which are N900XXUDND1 (contains 4 files inside) and N900XXUDNC1 (5 files inside, one of them is PIT file), and went to Download Mode, flash them via Odin PC v3.10. There was no fail. But the bootloop doesn't go away, even though I did a wipe data/cache (now it returns to Samsung's stock recovery mode)
Please tell me if there's anything that could help me get out of this situation.
I did read the thread here, and here, but my situation might be a bit harder.
Thank you.
Take your battery out, then try and reenter recovery and then wipe, factory reset etc. Boot up and see. Give it a few mins to actuality load up. If it boot loops again, reflash stock and then you should be OK.
Sent from my Spectrum ZX +2
That doesn't help
radicalisto said:
Take your battery out, then try and reenter recovery and then wipe, factory reset etc. Boot up and see. Give it a few mins to actuality load up. If it boot loops again, reflash stock and then you should be OK.
Click to expand...
Click to collapse
Thank you, @radicalisto.
Like I said, I tried to re-flash few stock roms which are NC1, ND1, NG1 but it didn't help. I'm still be able to enter Download Mode and Recovery Mode, but no matter it's a stock rom or custom rom, it cannot pass the bootloop. I'm gonna try the newer stock rom NI1, but I cannot download it from Sammobile
SOLVED by UPBOX
I have my phone upboxed Didn't know exactly the problem, but I assume that Halaszk kernel causes the bootloop.
Hello,
trying to help a pal bring his phone back to life.
Used the latest version of odin to flash an official rom. Odin showed that it had passed and flung up no errors. Boot loop remained.
Eventually tracked down the correct carrier via sammobile and downloading it.
If this doesn't work then I am out of idea's.
Anything else I could do to fix it or could it be hardware?
Before flashing, uncheck everything in Odin. Flash rom and, when you see the word "reset" in the status window, remove the USB cable, remove battery, replace battery, use button combination to boot into recovery, factory wipe, reboot.
Thanks ..... The only thing I didn't try there was factory wipe when in recovery
Sent from my iPhone using Tapatalk
flashed the official carrier rom and unfortunately it still boot loops.
Odin is showing pass every time i flash a rom and no errors
crazygoldfish said:
flashed the official carrier rom and unfortunately it still boot loops.
Odin is showing pass every time i flash a rom and no errors
Click to expand...
Click to collapse
Also it only boots into doing mode not recovery
thinking its hardware
now when i try to flash any roms at all its failing, even roms that previously passed.