Database Users

Touch screen doesn't work :(

after flash a rom worked for 2 hours normal then the touch screen dead ??? any body can help me with that please ,, sorry for my bad english

What rom?
Try hard resetting or reflashing the Rom

thanks
duprade said:
What rom?
Try hard resetting or reflashing the Rom
Click to expand...
Click to collapse
thanks for the answer but i tried to reflash the rom and hard reset but with no results, i think its a hardware problem ?????

I had a wing and the touch screen stopped working on it for no reason... so it may be hardware

duprade said:
I had a wing and the touch screen stopped working on it for no reason... so it may be hardware
Click to expand...
Click to collapse
and did you fix it ??

did you put a new touch screen protector?
have you tried to flash a different ROM?
if it's a hardware problem, then you might have to send your phone to service center...or install new lcd touch screen by yourself

tareq557 said:
and did you fix it ??
Click to expand...
Click to collapse
no, I had to get it replaced.

mv3 said:
did you put a new touch screen protector?
no i didnt
have you tried to flash a different ROM?
yes i tried but still not work
if it's a hardware problem, then you might have to send your phone to service center...or install new lcd touch screen by yourself
Click to expand...
Click to collapse
yes i think its a hardware problem

touch screen problem

I install new rom from "sun"
but touch screen not worked.

underlinden said:
I install new rom from "sun"
but touch screen not worked.
Click to expand...
Click to collapse
Describe how you installed the rom. Please post each step that you did, so that we can identify the problem. Thanks.

htc touch elf aling screen loop (checked the Roll Up)

I follow each and everystep to the t. Somehow tho i cant set my aligment. I tried flashing other roms with same result. Was wondering if anyone know how to fix it? Also worst case scenario i have to reflash my backup. Is everything going to work fine?
i checked the Roll Up no info on my particular problem, and if there is please point it out.
Anyways
HTC ELFIN
ipl. 2.27.0002
spl hardspl 3.10
rom onyx 6 release 10
cant aling my screen, if anyone know how to fix this please sent me a pm with instructions link or anything, yesterday i flashed original wich also gave me the same issue, i have no idea what im doing wrong, im new to this phone.

have you tried msp remote alignement?

no luck with msp, i read thats possible to edit the registry key remotely, i was wondering if someone could supply me with theirs, and i could jus pop in remotely and change it!

I posted mine in another thread, I'll see if I can find them, or you can in the mean time as time as I won't be able too until the morning.
-------------------------------------
Sent from my HTC Hero

Found my old post
Mine is a p3450... but I hope this can be useful.
I have...
1947,1874 3188,3261 3187, 541 642, 515 641, 3259.
Stu
-------------------------------------
Sent from my HTC Hero

try the rom by Jerpelea... it skips the scree alignment... then you can figure out if its a screen issue or not

I think it's a low-memory issue Hard-reset your device and install ROM again, I hope it will fix it.
tell me when you've done that and tell me if it worked or didn't worked

Thanks a million on my way home to try it out right now. Will update if problem fix

thanks you guys rule, its working!

samcripp said:
thanks you guys rule, its working!
Click to expand...
Click to collapse
Out of curiosity, what part was it that got it working for you?

well without the numbers it would have been impossible, im working now on a good guide!

HTC Touch Align Screen Looping
Hi,
Recently my phone hanged and did not come back, so I did hard reset, as part of the process it opened up "Align Screen", even after aligning 4 corners I keep getting the same "Align Screen" and never allows me to proceed to next step. Is my digitizer/touch gone ?
Has any one faced similar problem?
~Karthikeyan Sw.

Problem with menu and back button

Hey all, my friend's i9500 has a big issue, back and menu buttons don't work (they don't even glow, they're like 'shutdown'), only key that works is home button.
He is on CM11, tried with stock ROM but they don't seem to work either, any fix or help? thanks guys :fingers-crossed:

Bump!

Anyone? :s

Feche said:
Hey all, my friend's i9500 has a big issue, back and menu buttons don't work (they don't even glow, they're like 'shutdown'), only key that works is home button.
He is on CM11, tried with stock ROM but they don't seem to work either, any fix or help? thanks guys :fingers-crossed:
Click to expand...
Click to collapse
Has he has the screen repaired?

wefixitllc said:
Has he has the screen repaired?
Click to expand...
Click to collapse
Nope, original touchscreen

Buump!

did u tryed to install google keyboard or android keybord or samsung keyboard? ^

DJDobermann said:
did u tryed to install google keyboard or android keybord or samsung keyboard? ^
Click to expand...
Click to collapse
Tried with stock ROM, no succes

Feche said:
Tried with stock ROM, no succes
Click to expand...
Click to collapse
Try to install any othey keyboard like THIS.
activate the installed keyboard.
maybe then ur button works.

Inverted Touch Screen X Axis After Flashing CF-AUTO Root Fix

Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986

Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?

Wuby986 said:
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Click to expand...
Click to collapse
Yeah I've seen quite a few with this problem including me, yw!

MMDragonRanger said:
Yeah I've seen quite a few with this problem including me, yw!
Click to expand...
Click to collapse
Wooow this is scary... Well for this we have a workaround.. Let's just hope this is the only "surprize" we can get.. Thanks for share..
Also i would like to say that this is gonna help only if, once you are in the firmware page after dialing, the first two lines from top are displaying different values for part's and general firmware..
Hitting the tsp update is going to make those match

MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !

neferym said:
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
Click to expand...
Click to collapse
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6

MMDragonRanger said:
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
Click to expand...
Click to collapse
yeah, whith this one, i can access to app : G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar
Ty !

Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...

The phone has been running properly ..
Helpful Information thanks buddy ...:good:

it works!
thanks

MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
---------- Post added at 02:28 PM ---------- Previous post was at 02:24 PM ----------
Dear it is fixed. Thanks a lot

Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
steviecvr said:
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
Click to expand...
Click to collapse
Sorry, a reboot fixed this. Thanks so much for this thread.

SwissGalaxy said:
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
Click to expand...
Click to collapse
Make that 3 idiots.

It didn't work for me..

Thanks a lot Mr wuby986,you save my life,after trying many methods on s6 reverted touchscreen,and all failed,tried yours and works,thanks a lot once again.

Worked for me!
I somehow got into this state on my T-Mobile Galaxy Note 4 (N910T) when I flashed the latest TWRP (v3.0.2-0). At first I flashed the .img using my existing TWRP 2.8.7, but then I was unable to boot into recovery. I then used ODIN to flash the .tar version which worked. However, after rebooting into the system my touch was all messed up. Thankfully the stylus worked just fine so I was able to use that to use my phone until I found this thread.
I did *#2663# in the dialer, saw my versions didn't match and did the update as per the OP. Everything is back to normal now!

This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).

I do have other problems. Recent and Back Button Not working
how to fix the recent button and back button of galaxy s6,it was working before then suddenly the button stop working even when you touch it its not showing any response or light..i did try to full factory reset in odin mode buts not fix the issue
please help im using the assististant menu for a while ands it really annoying
Tha ks

lanreb said:
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
Click to expand...
Click to collapse
So I have the same inverted screen problem! Although mine is across the Y-axis... Touch the left and the button on the right gets clicked.
I'm SURE what did it was installing TWRP 3.0! And now I see someone else had the same cause!
But I have a G920P running 5.0.2. (and I'd like to keep my firmware where it is). What can I do!? HELP!
I had root, but I needed to install a recovery so I could install Xposed Framework so I could enable a module. And here we are...
Update: This issue was solved for me. TWRP still won't boot, but at least my touch issue is gone.