Database Users

need solution creat google acccount

hi ;i nneed help to create google account for my htc dream
thank's
sorry for bad english

https://www.google.com/accounts/NewAccount

You should be able to do it directly on the phone.

what can i do it? when i start it it say create a new google account
i want to know if it is possible to connect with pc

Are you trying to activate it without a data plan? If so your gonna have to take a look at this:
http://forum.xda-developers.com/showthread.php?t=452316

hi!i saw the process but i don't know how to do,if u can help me with the process step by step.cause when i start the phone,i can't enter the menu or do another thing.i can just create the google account and when i create it it gives me this green message:"there's a probleme communicating whith the google server" and just front of "this could be a tempory probleme or your sim card maybe not provisioned for data service.if it's continues,call costomer care".this all i'm seeing on the screen......help me please cause i lose myself
sorry for my bad english,i'm a french man

Install ADP1.1 JFv1.41. It will allow you to skip registration and to do it later over wifi

what is the procedure to install ADP1.1 JFv1.41 I have just downloaded rightly it but I don't know how to install can show it you me all those that it is necessary to install it

The instructions are here:
http://forum.xda-developers.com/showpost.php?p=3219972&postcount=1
JFv1.41 can be installed in the usual way. Save the zip file to your sdcard named update.zip, boot into recovery mode (home + power), and then press alt+s. If you are switch between versions, e.g. from RC30 to ADP1, you must also do a wipe in recovery mode (alt+w). This will clear all your data/settings/apps, and you will have to re-register once it boots back up. If you are staying on the same build, i.e. from JFv1.31 RC30 to JFv1.41 RC30, then you shouldn't have to do a wipe.
Click to expand...
Click to collapse
But you also need:
Note: To install these updates, you need to have a recovery image that uses test keys. If any of the following are true, you most likely have a recovery image that uses test keys
* you have installed my modified recovery image in the past
* you have an ADP1
* you currently have one of my modified firmwares installed
Click to expand...
Click to collapse

nice djob! your solution work succefully i say thank's to you ,thank's for your help

No problem.. JesusFreke is the person that you have to say thanks

hello
I am having his same problem not being able to go past the sign in page,,,
The other problem is that when i connect the phone 2 the pc a drive appear (E://) on my computer but i cant open it at all ..
Also i just unlocked my phone using this pay site.. so i dont want to lose my unlocking ..
please help ... cos I have three g1s and i cant figure how to solve this issue ..
best

hello
I am having his same problem not being able to go past the sign in page,,,
The other problem is that when i connect the phone 2 the pc a drive appear (E://) on my computer but i cant open it at all ..
Also i just unlocked my phone using this pay site.. so i dont want to lose my unlocking ..
please help ... cos I have three g1s and i cant figure how to solve this issue ..
best

i dont have internet at all on my sim ..so i need a way to be able to enter the phone for the first time w/o the pain of signing in ..
im not a computer genius.. so please give me instructions step by step
best

Andrioid has been deleted from my phone

Hi All,
I am in a big mess recently installed TWER ROM and nexus andriod 4.3 did something actual andriod had been deleted from my phone did try to reset or factory reset but nothing is working.How to get back to my previous android version
I am using samsung galaxy s4 i9505dxudmh6

Use Odin

Can u provide me some more details
I am pretty new to these..i know about odin can you tell me what to do in that

rabbu456 said:
I am pretty new to these..i know about odin can you tell me what to do in that
Click to expand...
Click to collapse
Download the appropiate firmware(mh6) for your variant then flash it using odin
try to visit here
http://forum.xda-developers.com/showthread.php?t=2419762

Can you send me the exact
Sorry to bug u .............can send u me the exact i am confused

wouldickyCi
I tried below but my phone is struck at intital logo Samsung galaxy S4 screen its not turning on.
Install and run Chainfire's TRIANGLE AWAY (I9505 ONLY, I9500 is NOT SUPPORTED YET)
NOTE: There is an option "System modified workaround", please tick this and restart your phone. Device Status should be back to OFFICIAL!! Use it with caution!!
Next few steps are ONLY for people who couldn't reset it with Triangle Away...
1. Reboot into Download Mode and check if Binary & System are OFFICIAL.
2. Only if the BINARY Status is still Custom, download and extract OFFICIAL STATUS MOD(.tar.md5): GT-I9500 or GT-I9505 - open in Odin as PDA (password: djembey2013)
3. In some cases FACTORY DATA RESET (Phone Settings=>Accounts=>Backup & reset =>Factory Data Reset) is required to reset Device Status.

You probably just need to do a factory reset. If the Odin flash was successful, simply boot into recovery (volume up+home+power) delete user data. reboot.

not working
still struck on samething no progress after logo

need serious help
my phone is not working need urgent help

Why do you start messing with your phone when you have no idea what you are doing? Thats just dumb.
What are you doing with Triangle Away? Do you have any idea what it does?
Stop messing with your phone before you make it worse! Just chill and start reading the forums!
Tell us STEP BY STEP, what you did with your phone. Stop saying help my phone doesn't work. That's USELESS information! We need details.

Omega Pro had helped me
I tried to install Google android 4.3 (nexus) on my phone i was successful but i didnt like that as it disable all the samsung features(palm,autostay) i tried to remove that but i messed something here i tried reset in TWRP after that my phone didnt start it was struck on samsung logo.
I tried to install google 4.3 again and it worked i had installed Omega rom its working fine but i do see my phone is slow i am still thinking of going back to actual android 4.2.2 version if u can help that would be great.
Thanks all for ur help.
Lennyz1988 said:
Why do you start messing with your phone when you have no idea what you are doing? Thats just dumb.
What are you doing with Triangle Away? Do you have any idea what it does?
Stop messing with your phone before you make it worse! Just chill and start reading the forums!
Tell us STEP BY STEP, what you did with your phone. Stop saying help my phone doesn't work. That's USELESS information! We need details.
Click to expand...
Click to collapse

rabbu456 said:
I tried to install Google android 4.3 (nexus) on my phone i was successful but i didnt like that as it disable all the samsung features(palm,autostay) i tried to remove that but i messed something here i tried reset in TWRP after that my phone didnt start it was struck on samsung logo.
I tried to install google 4.3 again and it worked i had installed Omega rom its working fine but i do see my phone is slow i am still thinking of going back to actual android 4.2.2 version if u can help that would be great.
Thanks all for ur help.
Click to expand...
Click to collapse
Download Samsung Kies,
Go to tools and click firmware upgrade and initialization
If you have 9505 type in Model: GT-I9505 If you have 9500 type in Model: GT-9500
Now it will ask your S/N Number. If you cannot boot to android then pull out the battery and there must be S/N Number (NOT Battery S/N)
If you can boot to android, then go to Settings, touch more then scroll down find and touch about device, then touch status, scroll down and see the serial number
type it in Kies
Then follow instruction from kies
you must boot to download mode first (you can do this with: turn off the device then press Volume Down + Home Button + Power Button and then if you release it and press volume up to continue it)

not working
When i tried got error saying GT-I9505 does not support intializing
Bordo_Bereli51 said:
Download Samsung Kies,
Go to tools and click firmware upgrade and initialization
If you have 9505 type in Model: GT-I9505 If you have 9500 type in Model: GT-9500
Now it will ask your S/N Number. If you cannot boot to android then pull out the battery and there must be S/N Number (NOT Battery S/N)
If you can boot to android, then go to Settings, touch more then scroll down find and touch about device, then touch status, scroll down and see the serial number
type it in Kies
Then follow instruction from kies
you must boot to download mode first (you can do this with: turn off the device then press Volume Down + Home Button + Power Button and then if you release it and press volume up to continue it)
Click to expand...
Click to collapse

Phone Kies screenshot attached
Please find the attachment for phone screenshot in kies
rabbu456 said:
When i tried got error saying GT-I9505 does not support intializing
Click to expand...
Click to collapse

Kies won't work because you have a custom rom installed.
Why dont you just flash a custom rom in the recovery?
1. Do a factory reset in recovery. Wipe system/data/cache.
2. Flash a custom rom.
3. Boot.
It's as simple as that.
Or do you want to flash a stock rom? If so, make sure you flash a knox disabled stock rom.

rabbu456 said:
Please find the attachment for phone screenshot in kies
Click to expand...
Click to collapse
Do you have like an electronics store in example best buy? They can reflash your factory firmware for you. Or your carrier provider.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

will go try best buy
Will try best buy.............Thanks for ur help guys
[email protected] said:
Do you have like an electronics store in example best buy? They can reflash your factory firmware for you. Or your carrier provider.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse

rabbu456 said:
Will try best buy.............Thanks for ur help guys
Click to expand...
Click to collapse
I'm sure you can get it running with odin. Download Odin ver 3.07. Download the stock mh6 firmware from sammobile.com. it's a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that file in odin, PDA slot. Only have auto-reboot checked in Odin.

Note 4 Sm-n910c; marshmallow problems

Somebody help me please
I have note 4 Sm-n910c
I updated it to android marshmallow 6 via ota
After installing the update
the phone started working normally...
but when the screen is off it cannot work again unless i remove the battery and restart the phone again Please somebody help me solving this

Try performing a hard factory reset on your device but wipe the cache partition in the Recovery Mode menu first.

DarkGuyver said:
Try performing a hard factory reset on your device but wipe the cache partition in the Recovery Mode menu first.
Click to expand...
Click to collapse
I have already done this before. .
But no changes

gomaaarafa said:
I have already done this before. .
But no changes
Click to expand...
Click to collapse
I did wipe data/factory reset. . Is that what you mean ?

gomaaarafa said:
I did wipe data/factory reset. . Is that what you mean ?
Click to expand...
Click to collapse
Now i did what you asked me to do
I went to the Recovery Mode; wiped the cache partition ; wipe data/ factory reset
Also the problem.
Even i tried to downgrade to lollipop 5.1.1 ;which was working before ; through Odin but it didn't succeed
I don't know what to do now...
Please somebody help me solving this problem

Try reinstalling Marshmallow manually using Odin.

DarkGuyver said:
Try reinstalling Marshmallow manually using Odin.
Click to expand...
Click to collapse
Same issues with my note 4. Multiple resets but no results. How to reinstall Marshmellow on non rooted phone. PLs guide. ANYONE with solution pls pitch in.

DarkGuyver said:
Try reinstalling Marshmallow manually using Odin.
Click to expand...
Click to collapse
Let me try
I hope it will succeed

AKBhola said:
Same issues with my note 4. Multiple resets but no results. How to reinstall Marshmellow on non rooted phone. PLs guide. ANYONE with solution pls pitch in.
Click to expand...
Click to collapse
Here is the guide on how to do that:
Download Odin http://odindownload.com/ and extract it to a directory you can easily find.
Head to http://www.sammobile.com/firmwares/ and search for the firmware of your phone using the model number. Make sure that the firmware model number matches that of your device.
Once found, download it to your computer and extract its contents to a directory you can easily access.
Navigate through the directory where you extracted Odin and run it as administrator.
Now turn off your Samsung android device and boot it in Download Mode (press and hold Volume Down, Home and Power keys together). You will know if you’re in Download mode as you’ll be seeing “Downloading… Do not turn off target.”
You may now connect your phone to your PC using the USB cable.
Odin should be able to detect your device, otherwise, you need to install necessary drivers. Which you can get from http://developer.samsung.com/technical-doc/view.do?v=T000000117
Click on the PDA or AP button (depending on the version of Odin you’re using) and navigate through the directory where you extracted the contents of the firmware file you downloaded.
Look for the .md5 file and select it.
Now, click on Start button to begin the flashing. (DO NOT disconnect, turn off or use your Samsung device while the process is ongoing.) Now let it alone and do something else while the firmware is installing onto your device.
If the flashing is successful, you should see “RESET” or “PASS” on Odin interface (depending on the version you’re using). The phone should reboot by itself after that.
Go through the set up process but don't set it up properly. Turn off your device and boot it into Recovery Mode. Wipe the cache partition, wipe data/factory reset and reboot system now.
You can now setup you Samsung device properly using your Google/Samsung Account details.

DarkGuyver said:
Here is the guide on how to do that:
.................
Click to expand...
Click to collapse
Thanks DarkGuyver, I will try this over the weekend. For now temporary solution seems to work. Just a quicky on above "the process you suggested will not root or require rooting my device. Am i Correct

AKBhola said:
Thanks DarkGuyver, I will try this over the weekend. For now temporary solution seems to work. Just a quicky on above "the process you suggested will not root or require rooting my device. Am i Correct
Click to expand...
Click to collapse
Nope, if you follow my guide on how to install the stock firmware back onto your device. It will restore it to stock as if it was just fresh of the factory floor with the latest firmware installed on it. If you want root access you will have to root your device yourself. As I don't like doing that with any of my android devices, unless I have too. So I don't provide advice on how to do that.

DarkGuyver said:
Here is the guide on how to do that:
Download Odin http://odindownload.com/ and extract it to a directory you can easily find.
Head to http://www.sammobile.com/firmwares/ and search for the firmware of your phone using the model number. Make sure that the firmware model number matches that of your device.
Once found, download it to your computer and extract its contents to a directory you can easily access.
Navigate through the directory where you extracted Odin and run it as administrator.
Now turn off your Samsung android device and boot it in Download Mode (press and hold Volume Down, Home and Power keys together). You will know if youâ??re in Download mode as youâ??ll be seeing â??Downloadingâ?¦ Do not turn off target.â?
You may now connect your phone to your PC using the USB cable.
Odin should be able to detect your device, otherwise, you need to install necessary drivers. Which you can get from http://developer.samsung.com/technical-doc/view.do?v=T000000117
Click on the PDA or AP button (depending on the version of Odin youâ??re using) and navigate through the directory where you extracted the contents of the firmware file you downloaded.
Look for the .md5 file and select it.
Now, click on Start button to begin the flashing. (DO NOT disconnect, turn off or use your Samsung device while the process is ongoing.) Now let it alone and do something else while the firmware is installing onto your device.
If the flashing is successful, you should see â??RESETâ? or â??PASSâ? on Odin interface (depending on the version youâ??re using). The phone should reboot by itself after that.
Go through the set up process but don't set it up properly. Turn off your device and boot it into Recovery Mode. Wipe the cache partition, wipe data/factory reset and reboot system now.
You can now setup you Samsung device properly using your Google/Samsung Account details.
Click to expand...
Click to collapse
Can one of these versions in the next link work with me ?
http://forum.xda-developers.com/not...lollipop-5-0-1-multiple-t3028939/post58800901

It must be because of Marshmallow...
gomaaarafa said:
Somebody help me please
I have note 4 Sm-n910c
I updated it to android marshmallow 6 via ota
After installing the update
the phone started working normally...
but when the screen is off it cannot work again unless i remove the battery and restart the phone again Please somebody help me solving this
Click to expand...
Click to collapse
Strangely this was happening sometimes on a Marshmallow custom rom by eRobot as well. It must be something to do with marshmallow. Sometimes it still happens but when I press the power button shortly few times, the problem disappears. After flashing the latest version of eRobot Rom, it has been happening a lot less and it is okay without removing the battery. Just need to give a little time between power button presses...

gomaaarafa said:
Can one of these versions in the next link work with me ?
http://forum.xda-developers.com/not...lollipop-5-0-1-multiple-t3028939/post58800901
Click to expand...
Click to collapse
Any of them would work as they are all designed for use with the N910C.

DarkGuyver said:
Any of them would work as they are all designed for use with the N910C.
Click to expand...
Click to collapse
I will try it today

gomaaarafa said:
I will try it today
Click to expand...
Click to collapse
I'm using Galaxy note 5
Many applications( like viber, WhatsApp, Skype. ..) has been blocked in the country where I am staying .
Can somebody recommend me a good vpn app .
Please help me .
By the way.. i have tried hotspot sheild; hideninja and other applications..but no changes... please recommend me a good vpn app for Galaxy note 5..
And thanks again

Forgot to activate OEM-Unlock for Root. Phone Bricked: "Custom binary blocked by FRP"

Forgot to activate OEM-Unlock for Root. Phone Bricked: "Custom binary blocked by FRP"
Hello,
today i rooted my J5 (SM-J500FN) via Odin and CF-Auto-Root.
Everyting went well but after the root i unticked OEM-Lock (please dont ask me why i did it) and restarted my phone and this nice screen greeted me: "Custom binary blocked by FRP. SECURE FAIL: KERNEL"
So I tried everything I found on the Web and found nothing really helpful. Then i tried flashing the recovery and reflashing CF-Auto-Root but both got blocked in the Download Mode with the message "FRP Block".
Please can someone help me, i really hope i dont have to reset my phone because my google authenticator is stored on it, and it would be a real pain to write to the support of every account i connected to reset my Security Options.
Thanks, Toby
P.S: when i flash the boot.img does it wipe my device?

Toby9 said:
Hello,
today i rooted my J5 (SM-J500FN) via Odin and CF-Auto-Root.
Everyting went well but after the root i unticked OEM-Lock (please dont ask me why i did it) and restarted my phone and this nice screen greeted me: "Custom binary blocked by FRP. SECURE FAIL: KERNEL"
So I tried everything I found on the Web and found a few things like flashing the recovery. I tried reflashing CF-Auto-Root but both got blocked in the Download Mode with the message "FRP Block".
Please can someone help me, i really hope i dont have to reset my phone because my google authenticator is stored on it, and it would be a real pain to write to the support of every account i connected to reset my Security Options.
Thanks, Toby
P.S: when i flash the boot.img does it wipe my device?
Click to expand...
Click to collapse
Just flash the stock firmware.

ashyx said:
Just flash the stock firmware.
Click to expand...
Click to collapse
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...

Toby9 said:
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Click to expand...
Click to collapse
It will reset it...
Try using Smart Switch from Samsung to backup you stuff and accounts. Maybe it will work. Using Smart Switch you can also easily reflash the latest Marshmallow firmware.

Amarius1 said:
It will reset it...
Try using Smart Switch from Samsung to backup you stuff and accounts. Maybe it will work. Using Smart Switch you can also easily reflash the latest Marshmallow firmware.
Click to expand...
Click to collapse
And if i only flash the boot.img which is inside the firmware archive? would that be "save" to try?

Toby9 said:
And if i only flash the boot.img which is inside the firmware archive? would that be "save" to try?
Click to expand...
Click to collapse
I don't know about that... Try asking someine more experienced.
I do know that even in Recovery mode the ROM locks you out and doesn't let you factory reset for example

Amarius1 said:
I don't know about that... Try asking someine more experienced.
I do know that even in Recovery mode the ROM locks you out and doesn't let you factory reset for example
Click to expand...
Click to collapse
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!

Toby9 said:
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Click to expand...
Click to collapse
Congrats! Had the sane problem last summer and I had to completely reset it...
(Btw why thank you? I didn"t do anything ???)

Toby9 said:
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Click to expand...
Click to collapse
I did a guide in past: https://forum.xda-developers.com/showpost.php?p=68408932&postcount=65 . I'll add it to the new Q&A thread after I'll update that thread (when I'll have time).
Feel free to do a new guide.

Toby9 said:
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Click to expand...
Click to collapse
No it does not. You are not affecting the data partition.
This would only happen if you flashed the factory repair firmware.

Thank you all. Here is my Guide: https://forum.xda-developers.com/android/general/complete-guide-to-rid-custom-binary-t3541403
It is generally for all (Samsung) Smarphones as i believe that it wont be any different.
Amarius1 said:
Congrats! Had the sane problem last summer and I had to completely reset it...
(Btw why thank you? I didn"t do anything )
Click to expand...
Click to collapse
Im just glad it worked

Toby9 said:
Thank you all. Here is my Guide: https://forum.xda-developers.com/android/general/complete-guide-to-rid-custom-binary-t3541403
It is generally for all (Samsung) Smarphones as i believe that it wont be any different.
Im just glad it worked
Click to expand...
Click to collapse
Happy for you ^^

When activating the oem unlock you can install Twrp, kernel or custom rom without the activation of FRP security that is activated when you establish a security pattern in the device
When the binary is blocked by the FRP you must install the factory firmware, then enter the recovery and do a factory reset since the FRP prevents external access to the system and data as prevention
You will be prompted for the email and password of the previously used account

Demicro said:
When activating the oem unlock you can install Twrp, kernel or custom rom without the activation of FRP security that is activated when you establish a security pattern in the device
When the binary is blocked by the FRP you must install the factory firmware, then enter the recovery and do a factory reset since the FRP prevents external access to the system and data as prevention
You will be prompted for the email and password of the previously used account
Click to expand...
Click to collapse
You only need to enter your login details if you factory reset.
Flashing the stock firmware is enough to remove frp. No need to factory reset.

ashyx said:
You only need to enter your login details if you factory reset.
Flashing the stock firmware is enough to remove frp. No need to factory reset.
Click to expand...
Click to collapse
This problem I had several months ago, I did not remember well. You are right ?

custom binary blockby frp lock on samsung j510gn
ashyx said:
Just flash the stock firmware.
Click to expand...
Click to collapse
hi. i really need help with this. tried several times flashing stockrom using different versions of odin and trying out several firmwares. always result: FAIL. Its a company phone. I honestly didn't do anything with it. Went to bed, next day woke up with the phone off. when I turned it on, bam! custom binary message.

MoximuZ said:
hi. i really need help with this. tried several times flashing stockrom using different versions of odin and trying out several firmwares. always result: FAIL. Its a company phone. I honestly didn't do anything with it. Went to bed, next day woke up with the phone off. when I turned it on, bam! custom binary message.
Click to expand...
Click to collapse
Can you send the logs u get from odin? Also make sure u got the correct model of stock rom for ur device.

I also have frp lock om my phone. It will not boot past maim boot screen. I cannot install twrp due to cuatom binary blocked error. Adb doesnt recognkze my phone either. Odin does, i installed the stock firmware and still will not reboot. Any suggestions or thoughts?? I havent tried to turn oem yet via android studio. Currently in the middle of that. Please help

ndiddy88 said:
I also have frp lock om my phone. It will not boot past maim boot screen. I cannot install twrp due to cuatom binary blocked error. Adb doesnt recognkze my phone either. Odin does, i installed the stock firmware and still will not reboot. Any suggestions or thoughts?? I havent tried to turn oem yet via android studio. Currently in the middle of that. Please help
Click to expand...
Click to collapse
Which device? Don't you know your Google login details?

Where to start ?....soft bricked S4.... unknow delaer/firmware :-[

Hi folks!!!
I know is very annoying this question....
But already look in a lot of forums in XDA, but without luck....
So I first start with my background about restoring and flashing devices.....
MY first flashing device was a Galaxy S1 with Cyanogenmod.
Later a flash 1 Galaxy Young, and after I fixed a different and default random soft bricked Galaxy Young.
My last flashed device was a S5 with LineageOS 3/4 months ago....
Im did so installing CWM when was possible, using Odin , or ADB....from Linux and W$.....
Until I get lost my last phone Galaxy S5...
So I had to buy a 2° hand phone quickly....he was working OK... for a while ....the time has passed and become more and more slowly....so I decided to make a reset factory .......very BAD IDEA... I didn't take build information....just the model...GT-I9500....
The same info appears in the Odin download Mode....
But there is no tag with SN, and IMEI neither on the back... :'-(
So I get stuck in the Download mode ...but there IS NOT TAG about ODIN mode in this screen.....at least if
unplug the battery, and restart the phone holding PWR+HOME+VOL. DOWN .
[ EDIT ]
Trying to flash stock firmware with Kies ( who request a valid SN, what I take from web ) in the next models
GT-I9505
GT-I9500
give me this message ( in spanish =) ) ==> "este modelo no admite la inicializaciòn" , which means " this model cannot be initialized" .
[ end EDIT ]
I also tried smash (softly...covering with a canvas ) the power button...but without luck...
Seems like the phone is factory locked..... what I had read may be by AT&T or Verizon....any way to know which dealer?
Any idea or recomendation where to start ???
Its ( maybe ) JTAG cable the ONLY way/solution to fix this, or even this is NOT a solution...?
I will waiting for your answers....
TIA
PS: sorry if I made some mistakes with the english

Odin doesn't recognize the phone?

Rhoban said:
Odin doesn't recognize the phone?
Click to expand...
Click to collapse
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash..
After tryed to reset factory whithout luck, I tried to flash lineage, without any result.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
I tried to flash this ROMS's , setting the image on AP field from Odin
Verizon
I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5
I545VRUDMI1_I545VZWDMI1_I545VRUDMI1_HOME.tar.md5
From doidview ==> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
an this bootchain and bootloaders setting up on BL tab:
I545_OC1_Stock_Kernel.tar.md5
NB1-Boot.tar.md5
VRALEC.bootchain.tar.md5
From droidviews.com ==>
I545_NC5_Stock_Kernel.tar.md5
I545_NG6_Stock_Kernel.tar.md5
I know all above is a mess , but the list is the most detailed I can :silly:
thanks again!!!!
PS: I want to put the source link where I take the kernel images and ROM's , but because I'm newbie
( --- ALL new users prevented from posting outside links in their messages. ----), I can't

X00D45 said:
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash.
Click to expand...
Click to collapse
Hi, the same download screen before you started flashing? Do you have "no reboot" ticked? (Heimdall user sorry) After pass just restart the phone and wait 10 min or so.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
Click to expand...
Click to collapse
Never read into this, but resources are there( Seen some topic titles), there is hope for Verizon and AT&T users.
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
Click to expand...
Click to collapse
Did you have a backup? Flashing the wrong pit file might hardbrick your phone. I guess the above where blocked bij Odin (Lucky you).
In short:
Connect your phone in download mode> open Odin> click PDA or AP > Select the stock firmware > start.

You mentioned your device being a GT-I9500, but the ROMs you said you have downloaded are for I545 and I337, both of which are Snapdragon models. The GT-I9500 is the Exynos model.
So that may be your problem.

Thanks LexHimself for your advices! I had backed up already the contacts and pics.
and thanks Rhoban ....for you suggest I have to start again from the beggining, looking for the rigth ROM for my device... so thanks for put spot on the processor model !!!!
So I gonna start again, looking for the right ROMS...
I will post as soon has news about flashing Exynos rom´s....
thanks guys!!!

[SOLVED] !!!!
Hello guys!!!!
As Rhoban point me, I have to look for the right recover image ,and ROM for my phone GT-I9500, with Exynos processor, who has code JA3G, so with that code I can address well .
So I download this recovery image "philz_touch_6.12.8-i9500.tar.md5", and after install, I download and install the right LineageOS ROM for my system.....
but this would not have happened, if I would started for look for the processor model as FIRST STEP...
so THANKS SO MUCH RHOBAN, and thanks LexHimself for your advices!!!!
??????
Cheers!!!!