Andrioid has been deleted from my phone - Galaxy S 4 Q&A, Help & Troubleshooting

Hi All,
I am in a big mess recently installed TWER ROM and nexus andriod 4.3 did something actual andriod had been deleted from my phone did try to reset or factory reset but nothing is working.How to get back to my previous android version
I am using samsung galaxy s4 i9505dxudmh6

Use Odin

Can u provide me some more details
I am pretty new to these..i know about odin can you tell me what to do in that

rabbu456 said:
I am pretty new to these..i know about odin can you tell me what to do in that
Click to expand...
Click to collapse
Download the appropiate firmware(mh6) for your variant then flash it using odin
try to visit here
http://forum.xda-developers.com/showthread.php?t=2419762

Can you send me the exact
Sorry to bug u .............can send u me the exact i am confused

wouldickyCi
I tried below but my phone is struck at intital logo Samsung galaxy S4 screen its not turning on.
Install and run Chainfire's TRIANGLE AWAY (I9505 ONLY, I9500 is NOT SUPPORTED YET)
NOTE: There is an option "System modified workaround", please tick this and restart your phone. Device Status should be back to OFFICIAL!! Use it with caution!!
Next few steps are ONLY for people who couldn't reset it with Triangle Away...
1. Reboot into Download Mode and check if Binary & System are OFFICIAL.
2. Only if the BINARY Status is still Custom, download and extract OFFICIAL STATUS MOD(.tar.md5): GT-I9500 or GT-I9505 - open in Odin as PDA (password: djembey2013)
3. In some cases FACTORY DATA RESET (Phone Settings=>Accounts=>Backup & reset =>Factory Data Reset) is required to reset Device Status.

You probably just need to do a factory reset. If the Odin flash was successful, simply boot into recovery (volume up+home+power) delete user data. reboot.

not working
still struck on samething no progress after logo

need serious help
my phone is not working need urgent help

Why do you start messing with your phone when you have no idea what you are doing? Thats just dumb.
What are you doing with Triangle Away? Do you have any idea what it does?
Stop messing with your phone before you make it worse! Just chill and start reading the forums!
Tell us STEP BY STEP, what you did with your phone. Stop saying help my phone doesn't work. That's USELESS information! We need details.

Omega Pro had helped me
I tried to install Google android 4.3 (nexus) on my phone i was successful but i didnt like that as it disable all the samsung features(palm,autostay) i tried to remove that but i messed something here i tried reset in TWRP after that my phone didnt start it was struck on samsung logo.
I tried to install google 4.3 again and it worked i had installed Omega rom its working fine but i do see my phone is slow i am still thinking of going back to actual android 4.2.2 version if u can help that would be great.
Thanks all for ur help.
Lennyz1988 said:
Why do you start messing with your phone when you have no idea what you are doing? Thats just dumb.
What are you doing with Triangle Away? Do you have any idea what it does?
Stop messing with your phone before you make it worse! Just chill and start reading the forums!
Tell us STEP BY STEP, what you did with your phone. Stop saying help my phone doesn't work. That's USELESS information! We need details.
Click to expand...
Click to collapse

rabbu456 said:
I tried to install Google android 4.3 (nexus) on my phone i was successful but i didnt like that as it disable all the samsung features(palm,autostay) i tried to remove that but i messed something here i tried reset in TWRP after that my phone didnt start it was struck on samsung logo.
I tried to install google 4.3 again and it worked i had installed Omega rom its working fine but i do see my phone is slow i am still thinking of going back to actual android 4.2.2 version if u can help that would be great.
Thanks all for ur help.
Click to expand...
Click to collapse
Download Samsung Kies,
Go to tools and click firmware upgrade and initialization
If you have 9505 type in Model: GT-I9505 If you have 9500 type in Model: GT-9500
Now it will ask your S/N Number. If you cannot boot to android then pull out the battery and there must be S/N Number (NOT Battery S/N)
If you can boot to android, then go to Settings, touch more then scroll down find and touch about device, then touch status, scroll down and see the serial number
type it in Kies
Then follow instruction from kies
you must boot to download mode first (you can do this with: turn off the device then press Volume Down + Home Button + Power Button and then if you release it and press volume up to continue it)

not working
When i tried got error saying GT-I9505 does not support intializing
Bordo_Bereli51 said:
Download Samsung Kies,
Go to tools and click firmware upgrade and initialization
If you have 9505 type in Model: GT-I9505 If you have 9500 type in Model: GT-9500
Now it will ask your S/N Number. If you cannot boot to android then pull out the battery and there must be S/N Number (NOT Battery S/N)
If you can boot to android, then go to Settings, touch more then scroll down find and touch about device, then touch status, scroll down and see the serial number
type it in Kies
Then follow instruction from kies
you must boot to download mode first (you can do this with: turn off the device then press Volume Down + Home Button + Power Button and then if you release it and press volume up to continue it)
Click to expand...
Click to collapse

Phone Kies screenshot attached
Please find the attachment for phone screenshot in kies
rabbu456 said:
When i tried got error saying GT-I9505 does not support intializing
Click to expand...
Click to collapse

Kies won't work because you have a custom rom installed.
Why dont you just flash a custom rom in the recovery?
1. Do a factory reset in recovery. Wipe system/data/cache.
2. Flash a custom rom.
3. Boot.
It's as simple as that.
Or do you want to flash a stock rom? If so, make sure you flash a knox disabled stock rom.

rabbu456 said:
Please find the attachment for phone screenshot in kies
Click to expand...
Click to collapse
Do you have like an electronics store in example best buy? They can reflash your factory firmware for you. Or your carrier provider.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

will go try best buy
Will try best buy.............Thanks for ur help guys
[email protected] said:
Do you have like an electronics store in example best buy? They can reflash your factory firmware for you. Or your carrier provider.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse

rabbu456 said:
Will try best buy.............Thanks for ur help guys
Click to expand...
Click to collapse
I'm sure you can get it running with odin. Download Odin ver 3.07. Download the stock mh6 firmware from sammobile.com. it's a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that file in odin, PDA slot. Only have auto-reboot checked in Odin.

Related

[Q] Totally Lost - Samung Galaxy S i9000

Hi Guys,
So I've a Samsung Galaxy S i9000. Before I begin, can I just say I am totally and utterly technically un-savvy.
My friend rooted my phone so I could unlock it to use a particular sim card. However, my phone is now faulty and
I want to bring it back under warranty for repair/possible replacement.
I have this app called "Superuser" and I just cant get rid of it. I have tried a ridiculous amount of different YouTube
videos/blog instructions on how to un-root and delete the Superuser. None of them have worked in regards to removing
the app. I think I have un-rooted it but I don't know. Please please please can somebody help me! I've no idea what to do
and I don't understand 90% of the technical jargon in some of the instructions.
I tried restored it manually on my phone and via Kies but my phone was just totally restored the exact same way as it was
before (all photos,apps,contacts etc.). I've NO problem losing everything on my phone I don't care. The latest thing I tried was
an app where I typed in a code that apparently deletes the Superuser app but that kept saying it wouldn't work because it was a read
only file.
Here are my phones details:
Firmware: 2.3.3
Baseband: I9000XXJVO
Build Number: GINGERBREAD.XWJVH
Any help is very much appreciated. Thanks
Make note of the modem firmware by going to settings>about>baseband version
1. Go to samfirmware.com
2. Go to flash tools > I9000 and download it. Extract to desktop.
3. Download stock ROM. firmware> I9000 and then choose the one one that matches the baseband for your area. Like in Canada my baseband is I9000KG3. So that's the ROM I download.
4. Turn off your phone and put it in download mode by pressing volume down + power + home
5. Open Odin from your desktop and plug in your phone.
6. A yellow bar should highlight a com port. This means your phone is recognized, the number doesn't matter.
7. Tick repartition and load 512 put that came with the flash tool, and load your firmware into the PDA section.
8. Start Odin and let it do its magic.
9. When it is done, it might boot loop. Even if it doesn't, reboot into recovery (power off, then power home vol up) and wipe data factory reset.
10. Your phone is 10053-47338282747728728% stock.
11. Hit thanks
Sent from my GT-I9000 using xda premium
Deleting SuperUser will not unroot your phone, check on sammobile.com or checkfus the latest firmware for your country and flash with Odin.
You can find good guides on youtube about how to use it.
Wouldn't it be easier just to run it in recovery and flash unroot.zip file.
I always root my I9001 like this so it should also work in opposite way.
Typed with my I9001
It will leave traces. Best bet is to not.
Sent from my GT-I9000 using xda premium

Help - S4 WONT BOOT or enter RECOVERY!

Hello
My S4 (XUBMGA) wont boot, it kept crashing so i used Odin to fresh install the OS, but it wouldnt let me enter recovery mode after so then I googled and found this website which gave me steps to recover my OS via Odin and also re-partion the recovery mode via a PIT File.
Now my S4 wont boot (stays stuck on the Samsung 9505 logo) and when i try enter recovery the blue text 'Recovery Boot' or something stays there but it wont enter. The phone doesnt boot up but I can still enter download mode?
What can i do! Also im a newb at this so simple please
Thanks in advance!
Get a stock rom from Samfirmware, flash it with Odin. That's the only way you're fixing it. How ? Search.
MistahBungle said:
Get a stock rom from Samfirmware, flash it with Odin. That's the only way you're fixing it. How ? Search.
Click to expand...
Click to collapse
I did i downloaded the BTU United Kingdom Version but im not 100% sure which one to download? I bought the phone unlocked over eBay so im not sure which firmware to download exactly? I cant turn the phone on and go to about device as it wont boot to check all the numbers. Im sure it ended in MGA though
Any help?
BUMP
1) You absolutely do not bump threads after 25 minutes. This isn't your personal technical support hotline :-|
2) It makes no difference which firmware you use, as long as you use one for your specific model, tho I personally would use the latest one my carrier has released (if there was more than one). You may prefer to use an unbranded one for your country if there is one (I have no idea if there is/isn't one of these for the UK).
If you want to fix this, it's going to take a bit of effort on your part, we can't do it for you.
Edit - You really need to learn 'the basics' (people need to do this before they start messing with their phones, not after they bork them). Once you've fixed it, read the Stickies before you bork it permanently.
MistahBungle said:
1) You absolutely do not bump threads after 25 minutes. This isn't your personal technical support hotline :-|
2) It makes no difference which firmware you use, as long as you use one for your specific model, tho I personally would use the latest one my carrier has released (if there was more than one). You may prefer to use an unbranded one for your country if there is one (I have no idea if there is/isn't one of these for the UK).
If you want to fix this, it's going to take a bit of effort on your part, we can't do it for you.
Edit - You really need to learn 'the basics' (people need to do this before they start messing with their phones, not after they bork them). Once you've fixed it, read the Stickies before you bork it permanently.
Click to expand...
Click to collapse
I have and am trying. Im new to Samsung, just moved after years of iPhone, hence though rooting would be similar to jailbreaking the iPhone.
Ive tried multiple ROMs now using Odin 3.07, it says it passes etc but the phone stays on the Samsung Galaxy S4 logo, it doesnt still let me enter recovery mode, but allowss me to get into download mode.
Any advice? Thanks
Download the last Twrp recovery(tar format) for your phone from their website flash it with odin 3.07
Noticeut your tar file with PDA
uncheck the reboot box.let only the reset box checked.
Don't check for any reason the partition case.
GO to download mode with your phone:hold down volume+power+home
After volume +button to continue
You are now on the download mode.connect your phone to your computer
If the box in the left corner become blue .it ok
If in the message box you see "added".it ok
Now press the start (the button to begin the process)
Wait till you will see PASSED in the left upper case.(take around 2min)
Unplung your phone,remove the battery.
Reput the battery and swicht on your phone :hold hight volume+home+power
2nd notice:when you see the samsung logo appear for the first time and going,remove your hand and you will see the beautiful twrp interface.
By the way,you should already have download SuperSu 1.51 and put that somewhere In your extsd card.
Go to install(always in the twrp recovery)
And select the Super su 1.51 or 1.41,cause they are stable)(you know the path where you will put the SuperSu app)
Installation succefull.touch the reboot button on the interface .your phone will reboot and you will see this mesage "Android upgrading"
Ok.i think you have understood.
Sent from my GT-I9500 using xda app-developers app
Minou32 said:
Download the last Twrp recovery(tar format) for your phone from their website flash it with odin 3.07
Noticeut your tar file with PDA
uncheck the reboot box.let only the reset box checked.
Don't check for any reason the partition case.
GO to download mode with your phone:hold down volume+power+home
After volume +button to continue
You are now on the download mode.connect your phone to your computer
If the box in the left corner become blue .it ok
If in the message box you see "added".it ok
Now press the start (the button to begin the process)
Wait till you will see PASSED in the left upper case.(take around 2min)
Unplung your phone,remove the battery.
Reput the battery and swicht on your phone :hold hight volume+home+power
2nd notice:when you see the samsung logo appear for the first time and going,remove your hand and you will see the beautiful twrp interface.
By the way,you should already have download SuperSu 1.51 and put that somewhere In your extsd card.
Go to install(always in the twrp recovery)
And select the Super su 1.51 or 1.41,cause they are stable)(you know the path where you will put the SuperSu app)
Installation succefull.touch the reboot button on the interface .your phone will reboot and you will see this mesage "Android upgrading"
Ok.i think you have understood.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I followed your steps and also a youtube video but when my phone reboots and you have to enter recovery mode (to get to TWRP) it doesnt go beyond the blue font at the top left and the samsung logo. It stays there
Any advice mate
Thanks
bump - im desperate to get this sorted
hus2k7 said:
bump - im desperate to get this sorted
Click to expand...
Click to collapse
Bump
I think you 1.didn't check the reboot box
2.you removed the batterie after seing the passed message
3.and you removed your hand (all)after the samsung logo disapear
4.you download the last twrp for you model.
What is your phone model in fact?
If you want to see that go to 1.setting
2.more
3.about device
Mine is gt-i9500 simply
No at
No lce or others ones
Sent from my GT-I9500 using xda app-developers app

HELP my note 3 is dying

Hi, so the issue is my note 3 is stuck in a wierd loop.
N900A un rooted un flashed or anything. stock firmware straight from AT&A. no SD card.
ive been using it for about 3-4 days with no issues at all. today it suddenly turned off. i tried turning it on but it wont load up. i tried using the recovery mode to wipe evertyhing and start fresh. i cant do anything! the phone freezes after about 3-5 sec. i needed about 20 restarts just to get past the configuration menu when you start up your phone for the first time (had to do it in 2-3 sec). now my phone does load to the opening screen but will get stuck and restart after a couple of sec. i even managed to put airplane mode on but still no luck
sometimes i will get a random "XXX has stopped" error.
please help me i have no idea what to do that is my first android phone.
i attached a short film of what happens (youtube):
watch?v=CV2rmddefdg
take it back to AT&T for a replacement. in 3-4 days of actually obtaining the device it should NOT be doing what you have described if the device is completely stock, unrooted, etc etc. Show them what it is doing, get a little pissed off and you should get a new phone
joshndroid said:
take it back to AT&T for a replacement. in 3-4 days of actually obtaining the device it should NOT be doing what you have described if the device is completely stock, unrooted, etc etc. Show them what it is doing, get a little pissed off and you should get a new phone
Click to expand...
Click to collapse
im not in the states any more... i got relocated and i bought the phone to take with me
i see... that complicates it a bit now
you could attempt to root it and install a custom recovery and try flashing a different rom for your phone?
or
i guess you could always flash a newer firmware for your device?
joshndroid said:
i see... that complicates it a bit now
you could attempt to root it and install a custom recovery and try flashing a different rom for your phone?
or
i guess you could always flash a newer firmware for your device?
Click to expand...
Click to collapse
i i forgot to mantion that KIES gave me this message after recovery:
Device name : GALAXY Note3 (SM-N900A)
Service name : SM-N900A Software Update
Service version : Android Version : 4.3 / Baseband Version : N900AUCUBMI9
Service description :
does this mean this is my version and i can root it ? i cant remember if i applied the MJ5 update, and dont know if i should trust KIES.
where do i get a custom recovery from ? i tried looking for my firmware on the samsung website but they dont have it for N900A so i cant use odin
Johny201 said:
i i forgot to mantion that KIES gave me this message after recovery:
Device name : GALAXY Note3 (SM-N900A)
Service name : SM-N900A Software Update
Service version : Android Version : 4.3 / Baseband Version : N900AUCUBMI9
Service description :
does this mean this is my version and i can root it ? i cant remember if i applied the MJ5 update, and dont know if i should trust KIES.
where do i get a custom recovery from ? i tried looking for my firmware on the samsung website but they dont have it for N900A so i cant use odin
Click to expand...
Click to collapse
KIES wont recognize the device. i can only get it to work when in "odin" mode and even then all i can do is emergency recovery and no regular access to the phone.
Johny201 said:
KIES wont recognize the device. i can only get it to work when in "odin" mode and even then all i can do is emergency recovery and no regular access to the phone.
Click to expand...
Click to collapse
You could use kies to do an emergency recovery. It's in one of the options. You just need to put the model number and serial number in and connect it in download mode. It gives full instructions as you do it.
Drew071
Sent from my SM-N9005 using Tapatalk
drew071 said:
You could use kies to do an emergency recovery. It's in one of the options. You just need to put the model number and serial number in and connect it in download mode. It gives full instructions as you do it.
Drew071
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
tried that it brings me to the exact same state my phone was before the recovery... doesnt even bring me to the setting up menus in the beginning. its like it is doing nothing

ROMs unflashable, i9505 S4 XUBMF8

Hi there all,
I've been encountering a weird issue with the i9505 S4 XUBMF8. For whatever reason, I am currently unable to flash custom ROMs on it. The phone is KNOX-free and I have previously flashed custom ROMs on it before. I am able to root via CF Auto Root, install Triangle Away, but whenever a file is copied onto the phone's storage it never completes successfully (for example Broodplank's ROM will always be 10-15mb short). Even downloading the custom ROM directly onto the phone via stock Browser results on a Status 7 error.
Changing from CWM Recovery to Team Win doesn't help either, nor changing usb ports / computers and cables. (I've used both Generic and Samsung-branded ones.)
This is a phone which has previously managed to run custom ROMs, flashes stock Samsung ROMs and Radios via Download Mode fine, and installs "unknown" .apks fine as well.
Does anyone know what i'm doing wrong?
Summary: Phone currently running stock XUBMF8 (Firmware it came out of the box with), roots fine and installs custom Recoveries fine, flashes fine via Download mode. Just refuses to copy files properly (despite multiple formats / factory resets / flash stock firmware) and refuses to flash custom ROMs via custom Recoveries.
Devione said:
Hi there all,
I've been encountering a weird issue with the i9505 S4 XUBMF8. For whatever reason, I am currently unable to flash custom ROMs on it. The phone is KNOX-free and I have previously flashed custom ROMs on it before. I am able to root via CF Auto Root, install Triangle Away, but whenever a file is copied onto the phone's storage it never completes successfully (for example Brooplank's ROM will always be 10-15mb short). Even downloading the custom ROM directly onto the phone via stock Browser results on a Status 7 error.
Changing from CWM Recovery to Team Win doesn't help either, nor changing usb ports / computers and cables. (I've used both Generic and Samsung-branded ones.)
This is a phone which has previously managed to run custom ROMs, flashes stock Samsung ROMs and Radios via Download Mode fine, and installs "unknown" .apks fine as well.
Does anyone know what i'm doing wrong?
Click to expand...
Click to collapse
XUBMF8 is android 4.2.2 for branded phones:
- Spain (yoigo) or Poland (Play)
* Solution could be flash one stock rom for unbranded phone if is your case. Anyway if u conect ur phone to Kies and tell me ur CSC I can tell u what stock firmware is good for your unbranded phone
Joku1981 said:
XUBMF8 is android 4.2.2 for branded phones:
- Spain (yoigo) or Poland (Play)
* Solution could be flash one stock rom for unbranded phone if is your case. Anyway if u conect ur phone to Kies and tell me ur CSC I can tell u what stock firmware is good for your unbranded phone
Click to expand...
Click to collapse
Hi mate,
My CSC is i9505OLBBMF8
I used the *#1234# method.
Hope that helps. Thanks for your time.
Devione said:
Hi mate,
My CSC is i9505OLBBMF8
I used the *#1234# method.
Hope that helps. Thanks for your time.
Click to expand...
Click to collapse
Yw. We need to know your S4's CSC, as this has to match your firmware. If you install Kies (in ur pc) then you will get your firmware CSC :highfive:
Joku1981 said:
Yw. We need to know your S4's CSC, as this has to match your firmware. If you install Kies (in ur pc) then you will get your firmware CSC :highfive:
Click to expand...
Click to collapse
Hi there,
I've installed Kies and according to the "Firmware Information" section it says
Current firmware version: PDA:MF8 / PHONE:MF8 / CSC: MF8 (SIN)
Is that the right place i'm looking at? I've never used KIES before, this is my first,
Thanks for your time.
Devione said:
Hi there,
I've installed Kies and according to the "Firmware Information" section it says
Current firmware version: PDA:MF8 / PHONE:MF8 / CSC: MF8 (SIN)
Is that the right place i'm looking at? I've never used KIES before, this is my first,
Thanks for your time.
Click to expand...
Click to collapse
Yes is what I need. Ur phone is branded to Singapure (sintel). Do u unlocked it?
Joku1981 said:
Yes is what I need. Ur phone is branded to Singapure (sintel). Do u unlocked it?
Click to expand...
Click to collapse
It's unlocked, yes. This mobile was actually originally bought in Malaysia, unbranded and unlocked. I could not find any Malaysian XUBMF8, so I downloaded the SingTel one as an alternative whenever I needed to reset my phone to stock.
Devione said:
It's unlocked, yes. This mobile was actually originally bought in Malaysia, unbranded and unlocked. I could not find any Malaysian XUBMF8, so I downloaded the SingTel one as an alternative whenever I needed to reset my phone to stock.
Click to expand...
Click to collapse
Maybe the unique u need is factory reset ur phone :highfive:
Joku1981 said:
Maybe the unique u need is factory reset ur phone :highfive:
Click to expand...
Click to collapse
Hi there,
Apparently that doesn't work. I've tried resetting with stock, custom recoveries and through TouchWiz itself. It still gets the Status 7 error. Toggling "Verification Check" results in a failure, even though the MD5 checks out.
I really am at wits' end here...
Devione said:
Hi there,
Apparently that doesn't work. I've tried resetting with stock, custom recoveries and through TouchWiz itself. It still gets the Status 7 error. Toggling "Verification Check" results in a failure, even though the MD5 checks out.
I really am at wits' end here...
Click to expand...
Click to collapse
Try other ODIN and other USB port in ur pc
*EDIT: For factory reset ur phone u dont need flash nothing:
1. Backup ur data of ur Internal Memory
2. From your home screen press the apps icon in the lower right corner.
3. Find and press the settings icon.
4. In the upper end of the screen press the accounts tab.
5. in the bottom of the next screen press the Backup and reset button.
6. Press the factory data reset.
7. Read the info on your cell phone screen and hit Reset device.
8. Try to flash the firmware u wish again
9. If all go correct, copy ur data folders again in your phone and install the apps u had
Joku1981 said:
Try other ODIN and other USB port in ur pc
*EDIT: For factory reset ur phone u dont need flash nothing:
1. Backup ur data of ur Internal Memory
2. From your home screen press the apps icon in the lower right corner.
3. Find and press the settings icon.
4. In the upper end of the screen press the accounts tab.
5. in the bottom of the next screen press the Backup and reset button.
6. Press the factory data reset.
7. Read the info on your cell phone screen and hit Reset device.
8. Try to flash the firmware u wish again
9. If all go correct, copy ur data folders again in your phone and install the apps u had
Click to expand...
Click to collapse
Hi there,
I've did that before and it didn't work. I mentioned in the OP.
Devione said:
Hi there,
I've did that before and it didn't work. I mentioned in the OP.
Click to expand...
Click to collapse
what ODIN u are using?
Joku1981 said:
what ODIN u are using?
Click to expand...
Click to collapse
Hi there,
I've used 3 versions, 3.04, 3.07 and 3.09.
Devione said:
Hi there,
I've used 3 versions, 3.04, 3.07 and 3.09.
Click to expand...
Click to collapse
Anybody?
I'm running out of ideas, and after extensive searching it seems i'm the only one with this problem.

Help please

Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
go to sammobile.com and search for your model there
kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.
kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks
if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?
........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO
Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app
Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.

Categories

Resources