Hi,
Does anybody else experience buggy screen more and more often ??
The first few days, i couldnt' unlock it for 1 second or so... was fine
Then after 2 weeks, screen got unrepsonsive for a few seconds from time to times.
Then 3rd week, screen was unresponsive for 1 HOUR... found out cleaning the screen or decreseasing screen sensitivity with BsB seemed to help.
And today... i wanted to scroll down in some program, it reacted as if i had another finger on the screen and started to zoom in or out.... 3 mins later : my screen became unresponsive and it s unresponsive now for the last 2 hours... cleaning the screen doesn't help.. it just doesn't react at all and phone is useless now.
Question is : Do you guys also noticed some decreasing screen quality over time ?? (maybe in some DIFFERENT ways than i had.... like this guy here : http://wmpoweruser.com/?p=10735
I am not able to do what that guy did on the video ! :/
Maybe you should update rom
kaemon said:
Hi,
And today... i wanted to scroll down in some program, it reacted as if i had another finger on the screen and started to zoom in or out.... 3 mins later : my screen became unresponsive and it s unresponsive now for the last 2 hours... cleaning the screen doesn't help.. it just doesn't react at all and phone is useless now.
Click to expand...
Click to collapse
Yes, I've had exactly the same problem for a few weeks - it's Summer here in Australia and I noticed the same thing happening when the phone gets hot while in use or connected to the charger.
It doesn't get better until the phone cools down. Believe it or not, I had to put mine in the freezer to unfreeze it. That's right, the freezer to unfreeze it...ah forget it...
I've tried several ROM upgrades and hard resets - makes NO difference. It's a device (not software) fault so you'll probably need to replace it.
Here's another thing you can try to see if you have the same problem as me - put a second finger at the bottom left edge of the screen and see if it presses soft buttons on the right hand side.
After 4 months of flawless work, the lower part of the screen (a strip several millimeters from the edge) suddenly stopped responding properly!
E.g., all buttons in this area (including launcher/phone/+ on home screen) either don't work at all, or sometimes activate after a while when strongly pressed with the thumb (orientation doesn't matter).
Just two hours before they responded fine to the index finger.
Also, I've noticed that when I "multi-touch" the lower line in a file browser with two fingers, it works nice! Buttons are too small for that, however
I first tried to restore backup, but it didn't help, of course.
Has anybody had the same problem?? I guess it's a warranty case ...
I would agree, it's probably a hardware problem that you'll have to bring your phone in for service to get fixed.
I'm having that same problem my self, but just now and then. What helped with me is that I press the upper left corner of the phone with my other hand and then the lower part works fine, so i think i should get a new digitizer or its just loose connector.
im having the same problem , i have put up with it for the past few weeks and its driving me nuts now. today i did a factory reset which made no difference , i called htc who didnt sound a bit suprised by my phone call it gets picked up tomorrow morning to go for repair so the question is ... is this a common fault? and how the hell am i gonna cope without my hero in my pocket ?
Yeah happened to mine last week, a few have had the same issue where it's just the launcher bit not responding. Although the good news is that I'm getting it back tomorrow though so it's good times!
I had the same problem with my touchscreen (after a month or so!)
Mine got picked up thursday by HTC and I just checked the tracking site and they just recieved it.
I wonder how long it's going to take
Visited their service center last week.
They've immediately replaced my screen with a new one without any ado. Now everything works as before!
BUT a friend of mine who bought his Hero in January is having similar problems now...
It is a common problem according to HTC.
Mine was repaired in just 10 days.
Same problem here, did htc said anything about this problem? is it a common fault?
thank you
I said it in the post above yours.
ah yes, right, thank you
mach2005 said:
It is a common problem according to HTC.
Click to expand...
Click to collapse
If they acknowledge it officially, couldn't you provide a link please?
i gave mine last week to repair, they returned to me unfixed. on the paper stated that they only updated the software, what a dumb this htc guys. need to go back and tell them again the same story. im wasting my time only for this. wtf
I recently had this problem. The 3 buttons at the bottom of the screen wouldn't respond, took it into T-Mobile who said I'd have it back within about 7 to 10 days... 3 weeks later I got a text saying I could collect my phone...
On the paper sheet it says they've replaced the lens.. Which I can see they have as before I had a miniscule hairline scratch near the top.
They also mention a software update (1.0.0.A6288)
Either way it works nicely now.
I've recently experienced the same issue - the lower part of the screen, the one where the LauncherPro icons usually are stopped responding to touch. If I press really hard it works sometimes, but it's pretty annoying. I didn't sit on the phone or drop it recently, it just stopped working all of a sudden.
Is there anything I can do, as the phone is out of warranty ?
HTC South Africa gave me a new hero after I took mine in for the 3rd time. Hardware problem. Very happy with their service.
i have this exact same problem, is the only solution to send to htc? >_> Cuz my warranty's out already unfortunately... i flashed my hero to CyanogenMod 7 and it seems to have helped, but still not completely responsive... I also have a problem where at times i completely lose control of my touch screen where the spots i touch seem to respond to opposite sides of the screen... anyone else?
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
^ wtf do u mean?... are u just being a gimp...
VillainRocks said:
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
Click to expand...
Click to collapse
i am having the same problem and i badly need to solve it please could u tell me that what do you exactly mean by put a dryer on the htc logo
thanks
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Howdy folks... i will try to get a picture up tomorrow...
Basically a few days ago i picked up my phone and noticed a marble type effect on my screen, very similar to when you put inks into water etc.
At first i thought the lcd screen had leaked etc but my (actual) screen looks normal, no missing pixels or screen errors
It happened again few days later and then this morning my gf removed it from her pocket the whole touch area was like it... and still is now... 10 hours later...
Could water or moisture build up between the touch part and then screen???
During the time it happens the touch area doens't function at all!!
Any ideas or thoughts at all??
Thank you all very much in advance!!
dont know, but this happeded on my touch ELF and is happning on my touch 3g now, not happy might try a few crazy things before replacing the digitiser il let you know if anything works.
Heres a pic attached...
Cant really see it but maybe help to see the issue?
Can kinda see the outline of where the marble effect starts... and you can see the purple and lights green/blue effect its left..
I wouldn't mind but the touch screen doesn't work kinda making the phone useless!
tried a few things, like freezing than heating, worked for a while, calibration kept falling out. put it away and went back to my elf. tried it yesterday and it hardly responds to touch at all, responds randomly when you press it haaaaaaarrrddd.
might be time to get new parts
Looks like the touch screen sensors are out of sort. My experience with my previous model (HTC Kaiser) similar thing happened. Changing the screen solved everything, works like new.
I had problems with the touch screen on my touch 3g and tryed everything (hard restarts, screen aligns, millions of times) until i changed the digitiser in htc service and everything works fine now, like new as azahidi said. Good luck.
Hey guys so earlier this year I dropped my phone and the screen cracked. I ordered an lcd + digitizer from ebay and installed it myself. Everything had been working fine for a couple weeks but then randomly one day I woke up and the bottom 1/4th of the screen didnt work. Also, my screen is not very secure onto the device. I can peel off the lcd if I desired. I put double sided tape on all the places that a guide showed me but the screen just doesn't seem to stay in which causes dust and other particles to get in between my screen. Could this be the problem?
Some things i forgot
This started off with only a small portion of the bottom part of my screen to stop working. But then it turned into my whole bottom 1/4th of the screen not working. However, the first time this happened, I fiddle with the screen since it comes off and just moved it around and the bottom 1/4th worked again. However the problem reoccurred and I can't seem to fix it this time.
Thanks for any help!
Edit: Forgot to mention that I tried to open the phone again and press down on the digitizer pins to make sure they were secure. Still didnt work
sorry for posing this as it offers no solution
but just to say i have the same situation on a nexus 5.. came compete with frame.. worked for a week then bottom 1/2 inch stopped working
My upper 1/4th of the screen stopped working... Seems to be like a fairly common issue with the LG G2 and some cases appeared all of a sudden without drops or water, some other with a bit of liquid or slight drop to the floor.
In my case I think it was due to excessive moisture when I used the phone while sweating profusely.
A screen replacement is at hand right after I get my smartwatch