Hey guys.
So here is my problem:
I want to install a stock rom on my l7 because i don't like cm 10.2 anymore.
Here is what i tryed:
To flash it via CWM (i found a flashable zip based on the stock rom) but somehow it don;t shows me errors but the installation time is about 20 seconds.. (i don;t think it installed it)
after i make the factory reset it's still stucked at the LG logo.
To flash it via kdz updater (HERE IS THE PROBLEM) my PC is not recognizeing the emergency mode ( vol + and power) but i can hear when it connects and disconnects (pc usb sound and it takes a couple of seconds) and the phones screen flashes for about 0.5 seconds (only when i connect it to the PC).
I do have the lattest drivers for my phone and i ran the kdz updater perfectly but it says no phone found
I made it before but now i don;t remember how i did it.
Please help me, I will be gratefull!
UPDATE!
I had to format the phones SD card and then my pc recognized the phone and finally flashed a stock rom.
[SOLVED]
Alex_Ngr said:
Hey guys.
So here is my problem:
I want to install a stock rom on my l7 because i don't like cm 10.2 anymore.
Here is what i tryed:
To flash it via CWM (i found a flashable zip based on the stock rom) but somehow it don;t shows me errors but the installation time is about 20 seconds.. (i don;t think it installed it)
after i make the factory reset it's still stucked at the LG logo.
To flash it via kdz updater (HERE IS THE PROBLEM) my PC is not recognizeing the emergency mode ( vol + and power) but i can hear when it connects and disconnects (pc usb sound and it takes a couple of seconds) and the phones screen flashes for about 0.5 seconds (only when i connect it to the PC).
I do have the lattest drivers for my phone and i ran the kdz updater perfectly but it says no phone found
I made it before but now i don;t remember how i did it.
Please help me, I will be gratefull!
UPDATE!
I had to format the phones SD card and then my pc recognized the phone and finally flashed a stock rom.
Click to expand...
Click to collapse
Great to hear you have fixed
please change the topic to [SOLVED]
Sorry but i'm just a newbie here. Plz help me ... I'm having someproblem with my SS4 I9500 GSM only model. Just bought it a few days ago and yesterday after I root it with Kingroot everything still ok until I download the TWRP recovery on CHPlay. It show some kind of warning that could affect my SD but I ignore and have it done something to install the TWRP on my phone. After one time reboot my phone started to run real slow , super hot until hang itself and extremely battery draining ( about 25 - 30 % for one time boot till it hang and reboot ). I've tried to reinstall an Original Firmware but couldn't because I can't connect my phone with the PC everytime I tried to connect the cable my PC show the Code Err 23. Device not recognized. . I tried the factory reset but it still operated like that and there's no TWRP but the original recovery of android. Changed the cable , changed the PC , still nothing happened. Someone plz help !!!
Hello to all XDA Family,
This is my first post here in XDA hope someone could help me reviving my Friend's HTC Desire 310. My friend asked me to repair her sister's bootloop HTC desire 310 uni sim. I searched a tutorial in XDA and downloaded the necessary files (Drivers, SP Flashtool & rom-Uni Sim). I followed the tutorial and finished flashing the stock rom. Unfortunately after flashing the rom the phone won't turn on or charge. I tried to reflashed it and got some error after the 100% yellow bar progress it gave me some errors.
*Below is the Scenario during and after flashing*
1- After flashing anything whatever it was the phone will get Hard Brick . Does it mean that Preloader or Bootloader "1st 2 data partations" is faulty.
2- Since Factory Mode is in Bootloader so you are not able to access it
3- since adb starts after bootloader phase so also u cant access it.
4- THANKFULLY i can get the phone into Preloader Mode by Removing Battery ===> connect usb ===> then hold Volume Down
5- In Preloader Mode the phone shutsdown in approxmatly 2-3 seconds getting SP Flash Tool Recognising it for 2 seconds and disconnect again after 2 seconds.
6- I can also get the phone into Preloader mode by Removing battery =====> connect USB =====> plug the battery back in. the phone will get into Preloader Mode for 2 seconds too but when i tried to flash the rom using SP Flash tool it give some error like (BROM ERROR: S_CHKSUM_ERROR) when the yellow progress bar reached 100%.
What can i do to revive the phone.? Please lend me your knowledge Thank you in advance.
Please help guys... thank you
I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.
Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me
Can you speak more clearly?I don't understand.Because my English is not very good.
zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?
Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?
Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse
I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)
can anyone help me with my problem?!...
earlier today, i tried to upgrade my grand 2 from 4.3 to 4.4.2 via odin.
I downloaded all the required files and started the process, i got my phone into download mode and plugged it in my pc (i used a cheap usb cable) and pressed start.
after 30 seconds it stopped and failed the upgrade.
i tried to flash it again and it was the same.
now my phone won't even boot or charge or enter download mode.
PLEASE HELP!
sorry for the long post.
Its ok brother...it happens...and i dont think so its becuz of cheap usb cable i think its becuz ur ROM was not properly downloaded!
Now as becuz u cant go to download mode...try going to recovery and reset your phone ! if you get successfuldo that...i think you'll be able to boot to download mode #likemypostifyoufeltok