I managed to hardbrick my note 4 ( Rogers, canada)
It is completely unresponsive. I tried to use a USB jig (300k resistor on the USB port) with no success.
I know that the jig work because I tested it in my wife's phone and it boots into download mode but when I connect it into my hardbricked note 4 nothing happens.
Today I realized that if I connect it to a computer windows shows QHSUSB_BULK in device manager.
(my working wife's one boots directly after plugging the USB so there is no qhsusb_bulk driver)
Is there any solution for it or have another paperweight?
Related
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!
Hi i have a nexus 7 (2012) everything was working fine until android 5. The device was slow and almost unusable. Then the 5.0.2 update came out and guess what? I updated it and now my laptop wont recognize the device so i tried a different cable and nothing. I plugged the nexus 7 in my second computer and nothing not even the sound that means you plugged something in the usb port. So i went to my brothers house and tried his computer.... the same... nothing. We plugged his nexus 7 (2012) 5.0.2 wich is the exact same device as mine and it works so we thought that it was the usb connector on the device and we switched my connector with his....NOTHING happens. computer wont recognize the device, no sound, no pop-up, no ADB detection. Does anyone have the same problem or a solution on how to downgrade 5.0.2 back to 4.4 without usb cable?
Thank you
Did you tried out to start n7 into fastboot mode and recovery mode?
Is usb not available also there?
fastboot and recovery mode also has no USB. absolutely nothing happens. when i connect the device it charges but the lightning icon does not appear on the battery in the status bar. and its not the usb port on the N7 i changed it.
?????????????????
Same here
I have the same Problem - a N7 GSM with 5.0.2 and no communication via USB.
I have tried different computers with Win7 and Ubuntu14.10. As well as differnt cables. (And all combinations of that work with my HTC M7, by the way)
Under Linux, not even lsusb shows the device, or dmesg shows any connection to a usb device.
To be completly honest, I did not give much love to my N7, I have been using it hardly. But when I did, I have been flashing some differnt Roms and testing different bootloaders so this might be some kind of my fault.
i updated to 5,1 and still the same problem so i assume its hardware related. but i know it is not the USB connector because i tried it on my brothers N7. and it works
Mine is quirky, comp recognizes it and can order boot but sideload and push to device don't work. Its odd.
Hi
my phone is running blisspop , cmw touch is installed . when i try to connect my phone to my PC , error message saying USB device not recognized , and saying device is malfunctioned.
i tried everything.
tried my phone with my friends laptop
changed usb cable
tried same usb with my friends G2 which is working fine. so this is not issue with USB cable.
so i tried to flash kdz to get rid of problem, i entered my phone "Download mode" my pc still displaying same error message.
is it hardware related issue?
It could be a hardware problem. I'm going through a similar case (but it's not a hardware issue though). By default you shold turn off the phone, connect the usb to the PC (not the phone) and then Hold Vol+ and Power, Until you see it entered download mode, THEN you plug the USB port to the phone.
install driver
Hello I have my galaxy note 4 bricked and I can't fix it with Odin because have problem connecting to a PC. When I connect the phone, the PC said "USB Device not recognized". I installed all drivers correctly. I verified with my wife's note 4 and its recognized correctly by the pc so I'm sure the drivers are not the problem. Also check on all usb ports and with many cables so the problem is with my phone. I can put the phone in downloading mode without problem but can not connect to Odin and Kies. If somebody know how to help me I'll apreciate so much.
I've got 5 S7s on my desk, all Canadian variant, all from the same manufacturer all the same model. - SM-G930W8
All are recognised by my PC but one and I can't work out why not!
Plugging the phone into the PC makes no noise from the PC but the phone seems to detect a regular charger not a PC.
I have plugged it in using different cables including the one in its box and the ones used on other devices that were recognised and only this phone doesn't work with any of them.
I have plugged in, unplugged and rebooted many times.
I have set the USB configuration to MTP (Media Transfer Protocol)/Transferring files.
USB Debugging is ON and OEM unlocking is ON.
I have tried booting into stock recovery and wiping cache AND factory resetting.
When phone is turned on "adb devices" returns nothing.
I have installed Samsung Kies and Samsung Smart Switch to reinstall the drivers.
NOTHING IS WORKING!
All threads I find tell me to do the things I have listed above and have people saying these have worked but all of them I had already tried and double tried and nothing is working.
The cables are correct and working with other S7s of the same model.
All the correct drivers are installed and have been uninstalled and reinstalled.
All the correct setting are selected and OEM unlock and USB debugging enabled.
Phone was fresh out the box as were the other four and all cables.
Samsungs apps installed on PC to ensure best drivers installed.
Would really appreciate some guidance or consolation that its not something stupid I'm doing! I work with these phones everyday and this has never happened! Just banging my head against a brick wall trying to resolve it
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
yaro666 said:
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
Click to expand...
Click to collapse
Thanks but unfortunately Odin doesn't recognise in download mode.
Could it be a USB port problem if I used the same port for the other 4 devices and have no issue?
I'm considering sending the phone back to manufacturer to be honest I think it may just be a faulty device or something!
I bet its microusb port fault
Had a similar issue on Windows 10 , if that's what your running let the phone be connected, uninstall the driver from device manager, and then install driver select have disk and select the basic mtp , if this doesn't help connect to Microsoft support and they'll guide you through it , worked for me , my phone used to detect on other laptops but mine , also I could connect other phones on mine but not my phone, hope this helps
same issue here