**EDIT**
This issue was solved for myself and another member here by tracking down the appropriate latest stock firmware for our regions and flashing it with Odin. Note that it took multiple flashes of the same firmware in Odin before it was actually fixed.
**Original Post**
Hi All,
I have a SGH-I337M from Rogers (Canada) and I'm having a hell of a time getting my phone working again. Here's the complete history. I originally took it from stock 4.2.2 to 4.4 Gummy ROM. Everything was working fine with that. I then found out about the easy sim unlock with the stock touchwiz ROM, so I plugged it into Kies to restore it to factory. However, I didn't realize (about a week ago) that they were rolling out the 4.3 update, so lo and behold I wound up with 4.3.
The unlock method was not working on this, so I got hold of the 4.2.2 official ROM and flashed it with Odin. It was at this time that I realized the 4.3 update included the knox bootloader (I think that's the bootloader? I'm still pretty green with this stuff), so of course I wind up with persisting flags showing warranty void, kernel is not seapermissive or whatever the error is, etc etc. ALSO, it was at the time of the 4.3 update that I realized wifi and sound do not work anymore. I flashed back to the Gummy rom, wifi starts working again but not sound.
PHEW, if you made it through that, thanks for your time! Anyway I'm now back at 4.2.2 because I figured I'd try the unlocking at least and... it doesn't work. I read from others that the wifi and sound not working had to do with the modem firmware not matching what the kernel expects, so I took my wifes phone (which is still running 4.2.2 and the unlock worked, also a SGH-I337M), ran the following:
Code:
su
cd mnt/sdcard/
dd if=/dev/block/mmcblk0p1 of=backup-NON-HLOS.bin
dd if=/dev/block/mmcblk0p2 of=backup-modem.bin
Copied those dumps, wrote them to my busted phone with:
Code:
su
dd if=NON-HLOS.bin of=/dev/block/mmcblk0p1
dd if=modem.bin of=/dev/block/mmcblk0p2
reboot
And.... all that to no avail. I'm literally just fumbling through this now because this stuff is going beyond the scope of what I know. Anyone who can help or point me in the right direction would be most appreciated! Thanks for your time!
Fixed
Alright so, as I mentioned the official rogers 4.3 update over Kies is what I believe caused these problems in the first place. What I did however was get hold of the latest official build from this link (RWC-I337MVLUEMK6-20131125124040) and flash it in Odin. Oddly enough after the flash, all is working. Perhaps there is a broken version being pushed out over Kies.
Stock Kernel After Install Cyanogenmod 11 | Kitkat | Build 8 | 29 Nov ]
I have many problems with my phone after install CM11, i follow the instructions step by step and the installation complete without any problems but,
First. I have, at turn on the phone in the first screen "Samsung Galaxy S4" there is something written in red at the top left corner : "KERNEL IS NOT SEANDROID ENFORCING" In yellow just above : "Set Warranty Bit : kernel"
I investigate that and this is call, stock kernel.
Second. The Wifi is tethering i can´t active, don´t work.
Third. the sound is @%&)*, i can hear nothing.
Fourth. The mic on the phone is dead too, i can do calls on my phone because the other person don´t hear me nothing.
Somebody knows how fix all of this problems or my phone is @%&)* forever?
Thanks anyway, i appreciated any kind of help. Merry Christmas and Happy holidays for all. God bless you.
Y4kk=_Sp4rr0w said:
I have many problems with my phone after install CM11, i follow the instructions step by step and the installation complete without any problems but,
First. I have, at turn on the phone in the first screen "Samsung Galaxy S4" there is something written in red at the top left corner : "KERNEL IS NOT SEANDROID ENFORCING" In yellow just above : "Set Warranty Bit : kernel"
I investigate that and this is call, stock kernel.
Second. The Wifi is tethering i can´t active, don´t work.
Third. the sound is @%&)*, i can hear nothing.
Fourth. The mic on the phone is dead too, i can do calls on my phone because the other person don´t hear me nothing.
Somebody knows how fix all of this problems or my phone is @%&)* forever?
Thanks anyway, i appreciated any kind of help. Merry Christmas and Happy holidays for all. God bless you.
Click to expand...
Click to collapse
Buddy! You're having the exact same problems I had. Can you tell me what carrier you are with and post your exact model here (like mine is SGH-i337M). The solution for me was to end up flashing (for the 4th or 5th time) the original stock touchwiz from branded by my carrier. The kernel warnings and such all went away, all sound and wifi works again (see my above posts). You might also be able to just flash the modem file for your phone, the CM version. Anyway post that stuff (exact model, carrier etc) and I'll see if I can help!
Furinax said:
Buddy! You're having the exact same problems I had. Can you tell me what carrier you are with and post your exact model here (like mine is SGH-i337M). The solution for me was to end up flashing (for the 4th or 5th time) the original stock touchwiz from branded by my carrier. The kernel warnings and such all went away, all sound and wifi works again (see my above posts). You might also be able to just flash the modem file for your phone, the CM version. Anyway post that stuff (exact model, carrier etc) and I'll see if I can help!
Click to expand...
Click to collapse
Thanks Furinax, i appreciated all the help could you give me, my phone is a Samsung Galaxy S4 SGH-I337M, mi carrier is Telcel in México, i tried to download the original ROM, the android version 4.3.3, but that you know, the FBI goes down Hotfile and SamMobile still upload all the ROM´s in Terafile, if you know another site where i can download this original ROM i thank you so much, my best regards.
Found it!
Y4kk=_Sp4rr0w said:
Thanks Furinax, i appreciated all the help could you give me, my phone is a Samsung Galaxy S4 SGH-I337M, mi carrier is Telcel in México, i tried to download the original ROM, the android version 4.3.3, but that you know, the FBI goes down Hotfile and SamMobile still upload all the ROM´s in Terafile, if you know another site where i can download this original ROM i thank you so much, my best regards.
Click to expand...
Click to collapse
Here ya go buddy, found it on terafile. Click this link here. ProTip! Use Bitcomet to do the HTTP download (copy the link once it starts downloading) and set the max connections to 20. This way you'll bypass the download throttle and download at full speed. Follow up and let me know if it works out for you!
In case you don't know, extract the zip, open Odin, click "PDA" and select the .md5 file you extracted. Put your phone into download mode by powering off and then powering on while holding the volume down rocker. It'll ask you to press volume up to confirm. Plug the phone in now and Odin will recognize the phone is ready for flashing (will say added! in the text field). Go ahead and click start. Note that this is a very big file so after you select it in Odin it will freeze for a while while it calculates the MD5 sum.
TCE-I337MUMUEMK6-20131128165859.zip
More Downloads
If anyone else is looking for their stock roms for SG4, most of them can be found at this link.
Furinax said:
Here ya go buddy, found it on terafile. Click this link here. ProTip! Use Bitcomet to do the HTTP download (copy the link once it starts downloading) and set the max connections to 20. This way you'll bypass the download throttle and download at full speed. Follow up and let me know if it works out for you!
In case you don't know, extract the zip, open Odin, click "PDA" and select the .md5 file you extracted. Put your phone into download mode by powering off and then powering on while holding the volume down rocker. It'll ask you to press volume up to confirm. Plug the phone in now and Odin will recognize the phone is ready for flashing (will say added! in the text field). Go ahead and click start. Note that this is a very big file so after you select it in Odin it will freeze for a while while it calculates the MD5 sum.
Thanks Furinax, i really appreciated your time and your help, i´m downloading already, i have philz recovery in the phone, do you reccomends do the flashing from philz or is better with Odin? i have the Odin v3.09, i hope fix my phone with this Original ROM, i will inform what happen, thanks again, my best regards, take care you.
---------- Post added at 01:12 PM ---------- Previous post was at 01:06 PM ----------
Furinax said:
If anyone else is looking for their stock roms for SG4, most of them can be found at
Thanks again Furinax, i will keep in contact, i will see what happens, my best regards.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Y4kk=_Sp4rr0w said:
Thanks Furinax, i really appreciated your time and your help, i´m downloading already, i have philz recovery in the phone, do you reccomends do the flashing from philz or is better with Odin? i have the Odin v3.09, i hope fix my phone with this Original ROM, i will inform what happen, thanks again, my best regards, take care you.
Click to expand...
Click to collapse
You can't flash it through recovery you have to use Odin and yes 3.09 should work fine. Make sure you extract the zip first and select the .md5 file that gets extracted from the zip. ALSO note that this will replace your custom recovery. I have not yet attempted to replace the stock recovery after flashing and fixing my phone, so I cannot tell you if it will work or not. At this point I'm just happy to have my phone working again so I'm not tampering and leaving it at stock. Also note that once you flash 4.3 the boot loader will be replaced so that if you tamper with the phone (flash anything new etc) it will permanently set a flag that you cannot change which indicates that your warranty is now void.
Stock Kernel Fix It but ....
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Furinax said:
You can't flash it through recovery you have to use Odin and yes 3.09 should work fine. Make sure you extract the zip first and select the .md5 file that gets extracted from the zip. ALSO note that this will replace your custom recovery. I have not yet attempted to replace the stock recovery after flashing and fixing my phone, so I cannot tell you if it will work or not. At this point I'm just happy to have my phone working again so I'm not tampering and leaving it at stock. Also note that once you flash 4.3 the boot loader will be replaced so that if you tamper with the phone (flash anything new etc) it will permanently set a flag that you cannot change which indicates that your warranty is now void.
Click to expand...
Click to collapse
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR]
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.[/QUOTE]
What happen Furinax, i´m very happy, after flashing my phone for second time, it fix all, my phone is back, i have WiFi, sound, and calls again, i learn the lesson, i will never flashing again with Customs RoM´s and i recommend to everyone don´t do it, thanks for helping me, have a great Christmas and a very vary happy new year, my best regards, salutes from Guadalajara, México, take care you, and god bless you.:good:
Y4kk=_Sp4rr0w said:
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR]
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
Click to expand...
Click to collapse
What happen Furinax, i´m very happy, after flashing my phone for second time, it fix all, my phone is back, i have WiFi, sound, and calls again, i learn the lesson, i will never flashing again with Customs RoM´s and i recommend to everyone don´t do it, thanks for helping me, have a great Christmas and a very vary happy new year, my best regards, salutes from Guadalajara, México, take care you, and god bless you.:good:[/QUOTE]
Yay! Glad to hear it. Just gotta watch and read lots before flashing custom roms. Some phones are a pain in the rear, some are fine. Usually stick to flagship phones for this. For example the Nexus series from Google, never had an issue flashing any of those phones. Anyway buddy I'm glad to hear it's all working, merry Christmas and happy new year to you too and God bless you as well. Take care!
I am going through this right now as we speak. I bought a S4 I337M tonight locked to Telus and am trying to unlock it for bell.....it was on 4.3 so yeah I tripped the knox bootloader which is ok because I do not have warranty on the phone BUT I installed 4.2.2 and tried the unlocking and of course it does not seem possible on the Telus i337m .....I followed all suggestions to a T so we must have to pay for codes....
Anyways I lost wifi and sound so i used odin to push back telus factory firmware mk6 and still have no wifi and sound ? Any ideas?
I am currently using odin and pushing it once again , fingers crossed
Any tips on both the unlocking and regaining sound and wifi ? thanks
stevenca said:
I am going through this right now as we speak. I bought a S4 I337M tonight locked to Telus and am trying to unlock it for bell.....it was on 4.3 so yeah I tripped the knox bootloader which is ok because I do not have warranty on the phone BUT I installed 4.2.2 and tried the unlocking and of course it does not seem possible on the Telus i337m .....I followed all suggestions to a T so we must have to pay for codes....
Anyways I lost wifi and sound so i used odin to push back telus factory firmware mk6 and still have no wifi and sound ? Any ideas?
I am currently using odin and pushing it once again , fingers crossed
Any tips on both the unlocking and regaining sound and wifi ? thanks
Click to expand...
Click to collapse
Hey. So a couple of things. First, if you did the unlock process with the 4.2.2 rom, you unfortunately have to re flash the 4.2.2 rom and this time in the menu turn sim lock back on. Then, you can proceed to flash 4.3.3 and buy an unlock code. The reason you have to re flash and explicitly re - enable sim lock using the 4.2.2 menu is that once it fails, if you don't do that then even your purchased unlock code won't work!
So make sure you do that. I believe it's #*0101 then hit menu key, select back. Hit menu again, select number input, enter 1. Get the ddms main menu or whatever it's called where you can see network lock options and then select on instead of off. There is actually a video on YouTube of this exact issue and fix, I've just been moving for 4 days and am beat so if you get really stuck here I can find it tomorrow.
Once you do that re flash 4.3.3 with Odin but before you do, enter recover mode and wipe/factory reset/cache everything and of course ensure you are backed up first.
It has been my experience and others experience that you may need to re flash 4.3.3 multiple times before the wifi and other issues will be fixed. Don't panic, it'll work. Once you've got that all sorted, I bought my unlock codes (did this painful process on three sgh-1337m's) from cellunlocker.net and all went perfect. Let me know if you have any more questions!
Thanks! took 3 times to get back wifi and sound.....so odd.
I am now flashing 4.2 again and i will change the settings you mentioned back to locked than clear cache/factory wipe before going back to 4.3 and ordering my unlock code online....I dont understand why it works for some and not [email protected]!!!
stevenca said:
Thanks! took 3 times to get back wifi and sound.....so odd.
I am now flashing 4.2 again and i will change the settings you mentioned back to locked than clear cache/factory wipe before going back to 4.3 and ordering my unlock code online....I dont understand why it works for some and not [email protected]!!!
Click to expand...
Click to collapse
Glad you got sound/wifi back! As far as why it sometimes works, phone had to be shipped with 4.2.2. Once they get upgraded to 4.3, the functionality is gone for reasons I'm not 100% on so I won't shoot my mouth off like I'm an expert. Lol enjoy your unlocked phone once you get it all sorted!
After the second flashing works, be patient
Furinax said:
Hey. So a couple of things. First, if you did the unlock process with the 4.2.2 rom, you unfortunately have to re flash the 4.2.2 rom and this time in the menu turn sim lock back on. Then, you can proceed to flash 4.3.3 and buy an unlock code. The reason you have to re flash and explicitly re - enable sim lock using the 4.2.2 menu is that once it fails, if you don't do that then even your purchased unlock code won't work!
So make sure you do that. I believe it's #*0101 then hit menu key, select back. Hit menu again, select number input, enter 1. Get the ddms main menu or whatever it's called where you can see network lock options and then select on instead of off. There is actually a video on YouTube of this exact issue and fix, I've just been moving for 4 days and am beat so if you get really stuck here I can find it tomorrow.
Once you do that re flash 4.3.3 with Odin but before you do, enter recover mode and wipe/factory reset/cache everything and of course ensure you are backed up first.
It has been my experience and others experience that you may need to re flash 4.3.3 multiple times before the wifi and other issues will be fixed. Don't panic, it'll work. Once you've got that all sorted, I bought my unlock codes (did this painful process on three sgh-1337m's) from cellunlocker.net and all went perfect. Let me know if you have any more questions!
Click to expand...
Click to collapse
Hello stevenca, i reflash a second time with the original ROM and normalized, do the reflash for a second or third time with the original ROM of your phone and I guarantee it will work, Furinax help me a lot, have a happy new year. I will keep in contact if i can help you.
I need help. ASAP
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download mode and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and restored to stock. 4.2.2 stock Bell Canadian i337m. Please help i'm a noob. also when i turn on my phone it says in red text KERNEL IS NOT SEANDROID ENFORCING and underneath in yellow text it says SET WARRANTY BIT: KERNEL
Pavandeep Dhillon said:
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download mode and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and restored to stock. 4.2.2 stock Bell Canadian i337m. Please help i'm a noob. also when i turn on my phone it says in red text KERNEL IS NOT SEANDROID ENFORCING and underneath in yellow text it says SET WARRANTY BIT: KERNEL
Click to expand...
Click to collapse
- U cant come back of 4.3 to 4.2.2. And u cant restore ur DATA/boot of 4.2.2 to one new firmware 4.3 either
- U will have to install now TWRP for ex.
- Go to Recovery and wipe all (data, system, cache and dalvik cache)
- Reboot in Download Mode
- Flash this firmware by ODIN
- Take a look in XDA the terms im writing u (TWRP, Recovery, Download mode, ODIN, Flashing firmware). They are very important steps for solve ur problems :highfive:
Thank you very much i'll come back with the results.
---------- Post added at 05:08 PM ---------- Previous post was at 05:02 PM ----------
How do i get TWRP on to my phone?
---------- Post added at 05:15 PM ---------- Previous post was at 05:08 PM ----------
Nevermind, i got TWRP through goomanager but the link you gave me for 4.3 partially works, the link itself is working but when im on the page and click download it creates a download link that doesnt work
---------- Post added at 05:20 PM ---------- Previous post was at 05:15 PM ----------
Pavandeep Dhillon said:
Thank you very much i'll come back with the results.
---------- Post added at 05:08 PM ---------- Previous post was at 05:02 PM ----------
How do i get TWRP on to my phone?
---------- Post added at 05:15 PM ---------- Previous post was at 05:08 PM ----------
Nevermind, i got TWRP through goomanager but the link you gave me for 4.3 partially works, the link itself is working but when im on the page and click download it creates a download link that doesnt work
Click to expand...
Click to collapse
ok i have to be the most annoying poster, sorry. TWRP through goomanager didnt work so im stuck with no download and no TWRP.
---------- Post added at 05:35 PM ---------- Previous post was at 05:20 PM ----------
OK i got TWRP and wiped everything just waiting on link, thank you.
I did everything you said still doesnt work.
I have a sprint galaxy s4 running cyanogenmod 11. I just bought the phone from someone. I went and got a new SIM for the device and tried to activate online. Did not work. I opened chat window with sprint and they put in the device's numbers and sim card number and asked me to make a test call, which did not work. They then asked me to type in ##72786#. They said it would auto reboot the device. It did nothing. They then started asking questions about if this was a used device. Obviously I don't want to have to go to the sprint store, I'm sure they would tell me they cannot activate a modded device.
Can anyone tell me how to activate?
edit: also had me enter ##659143# and said it should bring up a menu screen. It did nothing
Pretty sure those codes won't do anything unless you're on a TW based rom. I would flash the stock rom, then call and try to activate.
(And please remember questions go in the Q&A section)
Sent from my SPH-L720 using Tapatalk 2
As said above you'll need a touchwiz rom to get activated. I had the same problem when I got my phone.
Beezer80 said:
As said above you'll need a touchwiz rom to get activated. I had the same problem when I got my phone.
Click to expand...
Click to collapse
Thanks. I really like this rom and how its performing... can you please point me to a tutorial on how to bring back to stock, then to reinstall the same rom after activation? Person I got it from said the files are on the sd card
Download a touchwiz rom to your SD card. Boot into recovery and make a backup of your current setup. Then flash the touhwiz ROM. Activate your phone then boot back into recovery and restore your CM11 ROM.
Beezer80 said:
Download a touchwiz rom to your SD card. Boot into recovery and make a backup of your current setup. Then flash the touhwiz ROM. Activate your phone then boot back into recovery and restore your CM11 ROM.
Click to expand...
Click to collapse
Where do I get touchwiz? Cannot find it on google or xda.
You really need to learn ALOT before you start using a rooted phone. And flashing.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Touch wiz refers to any Samsung bloated ROM. There are numerous ones in the development section.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
You really need to learn ALOT before you start using a rooted phone. And flashing.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Touch wiz refers to any Samsung bloated ROM. There are numerous ones in the development section.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
What's done is done, I have a rooted phone. At this point I need to get through this. All help is appreciated.
I used a youtube tutorial, downloaded touchwiz and odin. Tried to install but it hung up in the middle and failed install. Now won't install through odin and I get the error 'firmware upgrade encountered an issue. Please select recovery mode in kies & try again".
Installed Kies, went to tools>firmware upgrade initialization... but it keeps saying incorrect serial.
Any ideas?
Boot into Download Mode, post what the text is in the upper-left-hand corner. (after saying "yes" to the warning.) As long as you don't do anything with Odin nothing will download.
There's nothing in that text that has any personally identifiable information.
guyrelax said:
What's done is done, I have a rooted phone. At this point I need to get through this. All help is appreciated.
I used a youtube tutorial, downloaded touchwiz and odin. Tried to install but it hung up in the middle and failed install. Now won't install through odin and I get the error 'firmware upgrade encountered an issue. Please select recovery mode in kies & try again".
Installed Kies, went to tools>firmware upgrade initialization... but it keeps saying incorrect serial.
Any ideas?
Click to expand...
Click to collapse
First of all, what baseband version are you on? Mdc, mdl, mf9,mk2, mja? That is important to know. If on say mf9, then flash with odin a stock mf9, therevare plenty of videos on youtube as to how to use odin. As for the kies error page or wathever justbpull the battery and go into download mode again and start over again. If it only goes half way and stops try a different usb port and make sure you are using the factory original usb cable, I had that same problem you describe of the kies error and itvwas the usb port. Give it a try, just take your time and don't loose your patience. Odin is pretty safe but at the same time you do not want to mess up. Triple check your settings and make surebyou have the right files. Good luck sorry about the typos.
---------- Post added at 04:33 AM ---------- Previous post was at 04:27 AM ----------
http://forum.xda-developers.com/showthread.php?t=2303917
Link to all roms, just scroll down to the stock touchwiz roms and choose the one you need.
matraca said:
First of all, what baseband version are you on? Mdc, mdl, mf9,mk2, mja? That is important to know. If on say mf9, then flash with odin a stock mf9, therevare plenty of videos on youtube as to how to use odin. As for the kies error page or wathever justbpull the battery and go into download mode again and start over again. If it only goes half way and stops try a different usb port and make sure you are using the factory original usb cable, I had that same problem you describe of the kies error and itvwas the usb port. Give it a try, just take your time and don't loose your patience. Odin is pretty safe but at the same time you do not want to mess up. Triple check your settings and make surebyou have the right files. Good luck sorry about the typos.
---------- Post added at 04:33 AM ---------- Previous post was at 04:27 AM ----------
http://forum.xda-developers.com/showthread.php?t=2303917
Link to all roms, just scroll down to the stock touchwiz roms and choose the one you need.
Click to expand...
Click to collapse
I also have the same issue with my secondary phone line that is an S4. I wasn't quite sure what the heck the issue was with my device since it was working perfectly fine in one month and then all of a sudden I can no longer dial out anymore! I was puzzled as all hell and was wondering whats going on? So i had thought instantly that its either needing a PRL Update or it has to upgrade the radio and at the time i had just literally updated the radio from MF9 i believe. everything worked BUT the phone line kept saying that wonderful "we are sorry but your account could NOT be validated" line and again and again didnt realize that untill reading this post that i didnt remember to upgrade to the latest firmware update. So your saying that is the issue? Doesn't a PRL update help some of those issues with connectivity as well right? that way if you wanted to downgrade your firmware in your radio you could still do so and just update your PRL correct me if i am wrong but i haven't messed with the issue in about 4-5 months so im a lil dusty and need some clarification. I also CANT find an option to Update the PRL in CM 11 at all and sprint had told me that was what i needed to do and i couldnt find that anywhere when i changed my number i basically got data connectivity ONLY... has the Update PRL option in CM11 become obsolete or removed? does just a radio firmware update solve all the connectivity issues? or i should say just most not all... Thank you too by the way I have been stumped and just needed another head to miss what was so an obvious issue if this works out to be the problem that has agitated me time and time again!
Hello,
I just flashed TWRP and LineageOs-v16.0-UNOFFICIAL from this https://forum.xda-developers.com/samsung-a-series/orig-development/rom-lineageos-v16-0-unofficial-samsung-t3892229 and after reboot the screens shows "Custom binary blocked by FRP Lock.".
I bought this mobile phone completely legal. I read a lot about this, but I do not really understand what the purpose this functionality has.
When I started flashing TWRP on it, I haven't done a "Factory Reset" in the original Firmware. So I of course don't know the Google Account from the previous owner. I also don't now why the hell the Google Account is responsible for this.
I read, that with flashing Stock Rom and activating "OEM Unlocking" and the problem should be solved. I have never heared of "OEM unlocking" before, on my other phones I don't even have this point in the developer options.
Is this the solution? And where can I get a Stock Rom which will work?
exaveal said:
Hello,
I just flashed TWRP and LineageOs-v16.0-UNOFFICIAL from this https://forum.xda-developers.com/samsung-a-series/orig-development/rom-lineageos-v16-0-unofficial-samsung-t3892229 and after reboot the screens shows "Custom binary blocked by FRP Lock.".
I bought this mobile phone completely legal. I read a lot about this, but I do not really understand what the purpose this functionality has.
When I started flashing TWRP on it, I haven't done a "Factory Reset" in the original Firmware. So I of course don't know the Google Account from the previous owner. I also don't now why the hell the Google Account is responsible for this.
I read, that with flashing Stock Rom and activating "OEM Unlocking" and the problem should be solved. I have never heared of "OEM unlocking" before, on my other phones I don't even have this point in the developer options.
Is this the solution? And where can I get a Stock Rom which will work?
Click to expand...
Click to collapse
Hello. Can you tell me what your variant of the phone is (SM-A510XX)(what are the numbers or letters which replace the "XX".
With the variant, I can help you get the stock rom and give you a guide on how to flash the stock rom via Odin. Hope this helps.:good:
InfernoWolf19 said:
Hello. Can you tell me what your variant of the phone is (SM-A510XX)(what are the numbers or letters which replace the "XX".
With the variant, I can help you get the stock rom and give you a guide on how to flash the stock rom via Odin. Hope this helps.:good:
Click to expand...
Click to collapse
@InfernoWolf19 i have a A510FXX7CRJ6 on which i want to flash stock android 7 on, can u tell me how or where i can find images for that? I tried sammobile.com, but u have to fill in a creditcardnumber there in order to be able to download an image and i dont have that.
Cainnub said:
@InfernoWolf19 i have a A510FXX7CRJ6 on which i want to flash stock android 7 on, can u tell me how or where i can find images for that? I tried sammobile.com, but u have to fill in a creditcardnumber there in order to be able to download an image and i dont have that.
Click to expand...
Click to collapse
No you don't need payment method for downloading from sammobile, Only needed if you want to download at high speeds. Provide me the link where you found your firmware from sammobile. With that link, I can download it, upload it to high speed servers, and then give you the link where you can download. I am asking for the link as I don't know what country you live in and therefore don't know the correct firmware. By the what I mean SM-A510xx, replace the "xx" and give the country code or the country you live in so that I can find the firmware as the number you gave me (A510FXX7CRJ6) is not what I meant and that number is a firmware number and not the device number.
ok, so after your post i tried another time to get an account on sammobile.com and now i succeeded. So the download is running atm. But the next question is; how am i supposed to get by the FRP lock? Cuz i tried to flash TWRP on it with odin, but got stopped by the FRP lock.
Cainnub said:
ok, so after your post i tried another time to get an account on sammobile.com and now i succeeded. So the download is running atm. But the next question is; how am i supposed to get by the FRP lock? Cuz i tried to flash TWRP on it with odin, but got stopped by the FRP lock.
Click to expand...
Click to collapse
No. You don't need TWRP to flash stock rom via Odin. Just get the phone into download mode and flash the stock firmware via odin. You flash it the same way as you flash TWRP but just use the stock firmware. Hope this helps. Also, please make sure that the firmware is correct and if not, your phone will be stuck in a boot loop.
InfernoWolf19 said:
No. You don't need TWRP to flash stock rom via Odin. Just get the phone into download mode and flash the stock firmware via odin. Hope this helps. Also, please make sure that the firmware is correct and if not, your phone will be stuck in a boot loop.
Click to expand...
Click to collapse
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
Oh. Ok I belive that the FRP lock won't stop the install as the phone is in download mode and the fact that you are flashing stock firmware.
---------- Post added at 09:32 PM ---------- Previous post was at 09:20 PM ----------
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
How is the download going? Really slow right? 15kb... and in chrome - I had to download my firmware at 5kb :crying:
---------- Post added at 10:08 PM ---------- Previous post was at 09:32 PM ----------
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
Good luck on flashing. Hope it is successful.
---------- Post added at 10:08 PM ---------- Previous post was at 10:08 PM ----------
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Cainnub said:
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Click to expand...
Click to collapse
You have two options. The google account has a cool off period and I read that if you wait 24 hours, the login will be gone. However, on old android phones, you have to wait 72 hours. But if you go to a Samsung service center, they will remove the logins for free.
I found this website where you can bypass the lock but I am not sure if it works. Do the samsung bypass and not any other brands. Try it anyway: https://www.unlockunit.com/blog/bypass-google-account-verification-factory-reset-protection/
Cainnub said:
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Click to expand...
Click to collapse
Did you get pass the login screen?
No I haven't. I just checked that website u posted, but apparently it doesn't work well with the browser on my mobile. So I'll check it out later on my laptop. I'll let u know, how it went.
Cainnub said:
No I haven't. I just checked that website u posted, but apparently it doesn't work well with the browser on my mobile. So I'll check it out later on my laptop. I'll let u know, how it went.
Click to expand...
Click to collapse
How did it go?