**EDIT**
This issue was solved for myself and another member here by tracking down the appropriate latest stock firmware for our regions and flashing it with Odin. Note that it took multiple flashes of the same firmware in Odin before it was actually fixed.
**Original Post**
Hi All,
I have a SGH-I337M from Rogers (Canada) and I'm having a hell of a time getting my phone working again. Here's the complete history. I originally took it from stock 4.2.2 to 4.4 Gummy ROM. Everything was working fine with that. I then found out about the easy sim unlock with the stock touchwiz ROM, so I plugged it into Kies to restore it to factory. However, I didn't realize (about a week ago) that they were rolling out the 4.3 update, so lo and behold I wound up with 4.3.
The unlock method was not working on this, so I got hold of the 4.2.2 official ROM and flashed it with Odin. It was at this time that I realized the 4.3 update included the knox bootloader (I think that's the bootloader? I'm still pretty green with this stuff), so of course I wind up with persisting flags showing warranty void, kernel is not seapermissive or whatever the error is, etc etc. ALSO, it was at the time of the 4.3 update that I realized wifi and sound do not work anymore. I flashed back to the Gummy rom, wifi starts working again but not sound.
PHEW, if you made it through that, thanks for your time! Anyway I'm now back at 4.2.2 because I figured I'd try the unlocking at least and... it doesn't work. I read from others that the wifi and sound not working had to do with the modem firmware not matching what the kernel expects, so I took my wifes phone (which is still running 4.2.2 and the unlock worked, also a SGH-I337M), ran the following:
Code:
su
cd mnt/sdcard/
dd if=/dev/block/mmcblk0p1 of=backup-NON-HLOS.bin
dd if=/dev/block/mmcblk0p2 of=backup-modem.bin
Copied those dumps, wrote them to my busted phone with:
Code:
su
dd if=NON-HLOS.bin of=/dev/block/mmcblk0p1
dd if=modem.bin of=/dev/block/mmcblk0p2
reboot
And.... all that to no avail. I'm literally just fumbling through this now because this stuff is going beyond the scope of what I know. Anyone who can help or point me in the right direction would be most appreciated! Thanks for your time!
Fixed
Alright so, as I mentioned the official rogers 4.3 update over Kies is what I believe caused these problems in the first place. What I did however was get hold of the latest official build from this link (RWC-I337MVLUEMK6-20131125124040) and flash it in Odin. Oddly enough after the flash, all is working. Perhaps there is a broken version being pushed out over Kies.
Stock Kernel After Install Cyanogenmod 11 | Kitkat | Build 8 | 29 Nov ]
I have many problems with my phone after install CM11, i follow the instructions step by step and the installation complete without any problems but,
First. I have, at turn on the phone in the first screen "Samsung Galaxy S4" there is something written in red at the top left corner : "KERNEL IS NOT SEANDROID ENFORCING" In yellow just above : "Set Warranty Bit : kernel"
I investigate that and this is call, stock kernel.
Second. The Wifi is tethering i can´t active, don´t work.
Third. the sound is @%&)*, i can hear nothing.
Fourth. The mic on the phone is dead too, i can do calls on my phone because the other person don´t hear me nothing.
Somebody knows how fix all of this problems or my phone is @%&)* forever?
Thanks anyway, i appreciated any kind of help. Merry Christmas and Happy holidays for all. God bless you.
Y4kk=_Sp4rr0w said:
I have many problems with my phone after install CM11, i follow the instructions step by step and the installation complete without any problems but,
First. I have, at turn on the phone in the first screen "Samsung Galaxy S4" there is something written in red at the top left corner : "KERNEL IS NOT SEANDROID ENFORCING" In yellow just above : "Set Warranty Bit : kernel"
I investigate that and this is call, stock kernel.
Second. The Wifi is tethering i can´t active, don´t work.
Third. the sound is @%&)*, i can hear nothing.
Fourth. The mic on the phone is dead too, i can do calls on my phone because the other person don´t hear me nothing.
Somebody knows how fix all of this problems or my phone is @%&)* forever?
Thanks anyway, i appreciated any kind of help. Merry Christmas and Happy holidays for all. God bless you.
Click to expand...
Click to collapse
Buddy! You're having the exact same problems I had. Can you tell me what carrier you are with and post your exact model here (like mine is SGH-i337M). The solution for me was to end up flashing (for the 4th or 5th time) the original stock touchwiz from branded by my carrier. The kernel warnings and such all went away, all sound and wifi works again (see my above posts). You might also be able to just flash the modem file for your phone, the CM version. Anyway post that stuff (exact model, carrier etc) and I'll see if I can help!
Furinax said:
Buddy! You're having the exact same problems I had. Can you tell me what carrier you are with and post your exact model here (like mine is SGH-i337M). The solution for me was to end up flashing (for the 4th or 5th time) the original stock touchwiz from branded by my carrier. The kernel warnings and such all went away, all sound and wifi works again (see my above posts). You might also be able to just flash the modem file for your phone, the CM version. Anyway post that stuff (exact model, carrier etc) and I'll see if I can help!
Click to expand...
Click to collapse
Thanks Furinax, i appreciated all the help could you give me, my phone is a Samsung Galaxy S4 SGH-I337M, mi carrier is Telcel in México, i tried to download the original ROM, the android version 4.3.3, but that you know, the FBI goes down Hotfile and SamMobile still upload all the ROM´s in Terafile, if you know another site where i can download this original ROM i thank you so much, my best regards.
Found it!
Y4kk=_Sp4rr0w said:
Thanks Furinax, i appreciated all the help could you give me, my phone is a Samsung Galaxy S4 SGH-I337M, mi carrier is Telcel in México, i tried to download the original ROM, the android version 4.3.3, but that you know, the FBI goes down Hotfile and SamMobile still upload all the ROM´s in Terafile, if you know another site where i can download this original ROM i thank you so much, my best regards.
Click to expand...
Click to collapse
Here ya go buddy, found it on terafile. Click this link here. ProTip! Use Bitcomet to do the HTTP download (copy the link once it starts downloading) and set the max connections to 20. This way you'll bypass the download throttle and download at full speed. Follow up and let me know if it works out for you!
In case you don't know, extract the zip, open Odin, click "PDA" and select the .md5 file you extracted. Put your phone into download mode by powering off and then powering on while holding the volume down rocker. It'll ask you to press volume up to confirm. Plug the phone in now and Odin will recognize the phone is ready for flashing (will say added! in the text field). Go ahead and click start. Note that this is a very big file so after you select it in Odin it will freeze for a while while it calculates the MD5 sum.
TCE-I337MUMUEMK6-20131128165859.zip
More Downloads
If anyone else is looking for their stock roms for SG4, most of them can be found at this link.
Furinax said:
Here ya go buddy, found it on terafile. Click this link here. ProTip! Use Bitcomet to do the HTTP download (copy the link once it starts downloading) and set the max connections to 20. This way you'll bypass the download throttle and download at full speed. Follow up and let me know if it works out for you!
In case you don't know, extract the zip, open Odin, click "PDA" and select the .md5 file you extracted. Put your phone into download mode by powering off and then powering on while holding the volume down rocker. It'll ask you to press volume up to confirm. Plug the phone in now and Odin will recognize the phone is ready for flashing (will say added! in the text field). Go ahead and click start. Note that this is a very big file so after you select it in Odin it will freeze for a while while it calculates the MD5 sum.
Thanks Furinax, i really appreciated your time and your help, i´m downloading already, i have philz recovery in the phone, do you reccomends do the flashing from philz or is better with Odin? i have the Odin v3.09, i hope fix my phone with this Original ROM, i will inform what happen, thanks again, my best regards, take care you.
---------- Post added at 01:12 PM ---------- Previous post was at 01:06 PM ----------
Furinax said:
If anyone else is looking for their stock roms for SG4, most of them can be found at
Thanks again Furinax, i will keep in contact, i will see what happens, my best regards.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Y4kk=_Sp4rr0w said:
Thanks Furinax, i really appreciated your time and your help, i´m downloading already, i have philz recovery in the phone, do you reccomends do the flashing from philz or is better with Odin? i have the Odin v3.09, i hope fix my phone with this Original ROM, i will inform what happen, thanks again, my best regards, take care you.
Click to expand...
Click to collapse
You can't flash it through recovery you have to use Odin and yes 3.09 should work fine. Make sure you extract the zip first and select the .md5 file that gets extracted from the zip. ALSO note that this will replace your custom recovery. I have not yet attempted to replace the stock recovery after flashing and fixing my phone, so I cannot tell you if it will work or not. At this point I'm just happy to have my phone working again so I'm not tampering and leaving it at stock. Also note that once you flash 4.3 the boot loader will be replaced so that if you tamper with the phone (flash anything new etc) it will permanently set a flag that you cannot change which indicates that your warranty is now void.
Stock Kernel Fix It but ....
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Furinax said:
You can't flash it through recovery you have to use Odin and yes 3.09 should work fine. Make sure you extract the zip first and select the .md5 file that gets extracted from the zip. ALSO note that this will replace your custom recovery. I have not yet attempted to replace the stock recovery after flashing and fixing my phone, so I cannot tell you if it will work or not. At this point I'm just happy to have my phone working again so I'm not tampering and leaving it at stock. Also note that once you flash 4.3 the boot loader will be replaced so that if you tamper with the phone (flash anything new etc) it will permanently set a flag that you cannot change which indicates that your warranty is now void.
Click to expand...
Click to collapse
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR]
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.[/QUOTE]
What happen Furinax, i´m very happy, after flashing my phone for second time, it fix all, my phone is back, i have WiFi, sound, and calls again, i learn the lesson, i will never flashing again with Customs RoM´s and i recommend to everyone don´t do it, thanks for helping me, have a great Christmas and a very vary happy new year, my best regards, salutes from Guadalajara, México, take care you, and god bless you.:good:
Y4kk=_Sp4rr0w said:
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR]
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
Click to expand...
Click to collapse
What happen Furinax, i´m very happy, after flashing my phone for second time, it fix all, my phone is back, i have WiFi, sound, and calls again, i learn the lesson, i will never flashing again with Customs RoM´s and i recommend to everyone don´t do it, thanks for helping me, have a great Christmas and a very vary happy new year, my best regards, salutes from Guadalajara, México, take care you, and god bless you.:good:[/QUOTE]
Yay! Glad to hear it. Just gotta watch and read lots before flashing custom roms. Some phones are a pain in the rear, some are fine. Usually stick to flagship phones for this. For example the Nexus series from Google, never had an issue flashing any of those phones. Anyway buddy I'm glad to hear it's all working, merry Christmas and happy new year to you too and God bless you as well. Take care!
I am going through this right now as we speak. I bought a S4 I337M tonight locked to Telus and am trying to unlock it for bell.....it was on 4.3 so yeah I tripped the knox bootloader which is ok because I do not have warranty on the phone BUT I installed 4.2.2 and tried the unlocking and of course it does not seem possible on the Telus i337m .....I followed all suggestions to a T so we must have to pay for codes....
Anyways I lost wifi and sound so i used odin to push back telus factory firmware mk6 and still have no wifi and sound ? Any ideas?
I am currently using odin and pushing it once again , fingers crossed
Any tips on both the unlocking and regaining sound and wifi ? thanks
stevenca said:
I am going through this right now as we speak. I bought a S4 I337M tonight locked to Telus and am trying to unlock it for bell.....it was on 4.3 so yeah I tripped the knox bootloader which is ok because I do not have warranty on the phone BUT I installed 4.2.2 and tried the unlocking and of course it does not seem possible on the Telus i337m .....I followed all suggestions to a T so we must have to pay for codes....
Anyways I lost wifi and sound so i used odin to push back telus factory firmware mk6 and still have no wifi and sound ? Any ideas?
I am currently using odin and pushing it once again , fingers crossed
Any tips on both the unlocking and regaining sound and wifi ? thanks
Click to expand...
Click to collapse
Hey. So a couple of things. First, if you did the unlock process with the 4.2.2 rom, you unfortunately have to re flash the 4.2.2 rom and this time in the menu turn sim lock back on. Then, you can proceed to flash 4.3.3 and buy an unlock code. The reason you have to re flash and explicitly re - enable sim lock using the 4.2.2 menu is that once it fails, if you don't do that then even your purchased unlock code won't work!
So make sure you do that. I believe it's #*0101 then hit menu key, select back. Hit menu again, select number input, enter 1. Get the ddms main menu or whatever it's called where you can see network lock options and then select on instead of off. There is actually a video on YouTube of this exact issue and fix, I've just been moving for 4 days and am beat so if you get really stuck here I can find it tomorrow.
Once you do that re flash 4.3.3 with Odin but before you do, enter recover mode and wipe/factory reset/cache everything and of course ensure you are backed up first.
It has been my experience and others experience that you may need to re flash 4.3.3 multiple times before the wifi and other issues will be fixed. Don't panic, it'll work. Once you've got that all sorted, I bought my unlock codes (did this painful process on three sgh-1337m's) from cellunlocker.net and all went perfect. Let me know if you have any more questions!
Thanks! took 3 times to get back wifi and sound.....so odd.
I am now flashing 4.2 again and i will change the settings you mentioned back to locked than clear cache/factory wipe before going back to 4.3 and ordering my unlock code online....I dont understand why it works for some and not [email protected]!!!
stevenca said:
Thanks! took 3 times to get back wifi and sound.....so odd.
I am now flashing 4.2 again and i will change the settings you mentioned back to locked than clear cache/factory wipe before going back to 4.3 and ordering my unlock code online....I dont understand why it works for some and not [email protected]!!!
Click to expand...
Click to collapse
Glad you got sound/wifi back! As far as why it sometimes works, phone had to be shipped with 4.2.2. Once they get upgraded to 4.3, the functionality is gone for reasons I'm not 100% on so I won't shoot my mouth off like I'm an expert. Lol enjoy your unlocked phone once you get it all sorted!
After the second flashing works, be patient
Furinax said:
Hey. So a couple of things. First, if you did the unlock process with the 4.2.2 rom, you unfortunately have to re flash the 4.2.2 rom and this time in the menu turn sim lock back on. Then, you can proceed to flash 4.3.3 and buy an unlock code. The reason you have to re flash and explicitly re - enable sim lock using the 4.2.2 menu is that once it fails, if you don't do that then even your purchased unlock code won't work!
So make sure you do that. I believe it's #*0101 then hit menu key, select back. Hit menu again, select number input, enter 1. Get the ddms main menu or whatever it's called where you can see network lock options and then select on instead of off. There is actually a video on YouTube of this exact issue and fix, I've just been moving for 4 days and am beat so if you get really stuck here I can find it tomorrow.
Once you do that re flash 4.3.3 with Odin but before you do, enter recover mode and wipe/factory reset/cache everything and of course ensure you are backed up first.
It has been my experience and others experience that you may need to re flash 4.3.3 multiple times before the wifi and other issues will be fixed. Don't panic, it'll work. Once you've got that all sorted, I bought my unlock codes (did this painful process on three sgh-1337m's) from cellunlocker.net and all went perfect. Let me know if you have any more questions!
Click to expand...
Click to collapse
Hello stevenca, i reflash a second time with the original ROM and normalized, do the reflash for a second or third time with the original ROM of your phone and I guarantee it will work, Furinax help me a lot, have a happy new year. I will keep in contact if i can help you.
I need help. ASAP
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download mode and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and restored to stock. 4.2.2 stock Bell Canadian i337m. Please help i'm a noob. also when i turn on my phone it says in red text KERNEL IS NOT SEANDROID ENFORCING and underneath in yellow text it says SET WARRANTY BIT: KERNEL
Pavandeep Dhillon said:
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download mode and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and restored to stock. 4.2.2 stock Bell Canadian i337m. Please help i'm a noob. also when i turn on my phone it says in red text KERNEL IS NOT SEANDROID ENFORCING and underneath in yellow text it says SET WARRANTY BIT: KERNEL
Click to expand...
Click to collapse
- U cant come back of 4.3 to 4.2.2. And u cant restore ur DATA/boot of 4.2.2 to one new firmware 4.3 either
- U will have to install now TWRP for ex.
- Go to Recovery and wipe all (data, system, cache and dalvik cache)
- Reboot in Download Mode
- Flash this firmware by ODIN
- Take a look in XDA the terms im writing u (TWRP, Recovery, Download mode, ODIN, Flashing firmware). They are very important steps for solve ur problems :highfive:
Thank you very much i'll come back with the results.
---------- Post added at 05:08 PM ---------- Previous post was at 05:02 PM ----------
How do i get TWRP on to my phone?
---------- Post added at 05:15 PM ---------- Previous post was at 05:08 PM ----------
Nevermind, i got TWRP through goomanager but the link you gave me for 4.3 partially works, the link itself is working but when im on the page and click download it creates a download link that doesnt work
---------- Post added at 05:20 PM ---------- Previous post was at 05:15 PM ----------
Pavandeep Dhillon said:
Thank you very much i'll come back with the results.
---------- Post added at 05:08 PM ---------- Previous post was at 05:02 PM ----------
How do i get TWRP on to my phone?
---------- Post added at 05:15 PM ---------- Previous post was at 05:08 PM ----------
Nevermind, i got TWRP through goomanager but the link you gave me for 4.3 partially works, the link itself is working but when im on the page and click download it creates a download link that doesnt work
Click to expand...
Click to collapse
ok i have to be the most annoying poster, sorry. TWRP through goomanager didnt work so im stuck with no download and no TWRP.
---------- Post added at 05:35 PM ---------- Previous post was at 05:20 PM ----------
OK i got TWRP and wiped everything just waiting on link, thank you.
I did everything you said still doesnt work.
Related
I've got a Samsung Galaxy S4 i9505 Australian Model. The Snapdragon one.
I initially had Omega V10, I upgraded to V18 and the sound turned itself on and off, but then it started rebooting randomly and sound stopped all together. I upgraded to V19 with the same issue of no sound after the first call is made. I re-installed V19, V18 & 10 a few times. I flashed the appropriate modem for my old boot-loader several times on each rom and done clean installs as well.
I then moved to the Pheonix ROM, Installed exactly as the instructions stated. I then installed the modem as per instructions as I was having issues with the GSM/LTE then after the first call sound stopped working all together. I flashed ROM again and again, flashed the modem again, flashed a Wi-Fi Fix modem, flashed the kernel a couple of times and sound still doesn't work. It's every time after the first call is made, it just disappears.
I then decided to do a stock recovery in Odin. I installed official stock firmware XXUBMG4. Still no sound, I was getting the sound on boot but now it's gone all together.
What's my next step here? I'm almost certain I didn't flash an incorrect modem file but maybe I did........Should I try installing official 4.3? Is this something to do with installing a modem that's higher than what I should have installed and now I can't go back but only forward eg: 4.3?
I've lost root now as I flashed the official stock firmware via Odin, I'm happy to do whatever it takes to get the sound working. I'm not fussed at all about warranty.
* #1234# to check software version of phone and pls make us a screenshot :highfive:
Joku1981 said:
* #1234# to check software version of phone and pls make us a screenshot :highfive:
Click to expand...
Click to collapse
Sorry, Couldn't take a screen shot but took a photo. I flashed stock firmware via Odin. I originally had XXUBMH1
Robotic4 said:
Sorry, Couldn't take a screen shot but took a photo. I flashed stock firmware via Odin. I originally had XXUBMH1
Click to expand...
Click to collapse
Download this ONE and flash it. When u finish the process, make us other photo like the post#3
Joku1981 said:
Download this ONE and flash it. When u finish the process, make us other photo like the post#3
Click to expand...
Click to collapse
Cool no worries, I'm downloading now. It say's it's got about an hour.
I'll flash as soon as it's downloaded. Hopefully this works!! If it does I'll be shouting you a drink!!
Robotic4 said:
Cool no worries, I'm downloading now. It say's it's got about an hour.
I'll flash as soon as it's downloaded. Hopefully this works!! If it does I'll be shouting you a drink!!
Click to expand...
Click to collapse
Before you flash the file your downloading now would you mind Downloading and extract this file (You should see GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.ta r)then flash the http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone. I want you to turn off your phone manually and wait a few sec and Press and hold Power+ Volume down Until you reach Download mode. Now open odin and select PHONE/CP and flash away. Have a nice day.
Repulsa said:
Before you flash the file your downloading now would you mind Downloading and extract this file (You should see GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.ta r)then flash the http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone. I want you to turn off your phone manually and wait a few sec and Press and hold Power+ Volume down Until you reach Download mode. Now open odin and select PHONE/CP and flash away. Have a nice day.
Click to expand...
Click to collapse
I just flashed this but it didn't fix the sound, as soon as it loaded I had an error coming up in the notification bar asking me to reboot as something was detected, something along those lines. It's the first time I've seen that error come up...is that something to do with Knox?
I'll flash the file the firmware I'm downloading now in 10 mins then see what happens. Or should I flash the firmware then flash this modem after?
Robotic4 said:
I just flashed this but it didn't fix the sound, as soon as it loaded I had an error coming up in the notification bar asking me to reboot as something was detected, something along those lines. It's the first time I've seen that error come up...is that something to do with Knox?
I'll flash the file the firmware I'm downloading now in 10 mins then see what happens. Or should I flash the firmware then flash this modem after?
Click to expand...
Click to collapse
Okey Im guessing you have the new bootloader since you said "knox" try to download and extract this and flash the http://www.mediafire.com/download/hdzf6fbobotxi61/GSM_Modem_XXUEML4_and_LTE_Modem_XXUML4.rar file with odin by selecting phone. This is a fix only but if the problem still persist feel free to flash the file that other guy gave you. im only giving you this fix just because alot of people had this problem that got fixed.Go to Settings and make sure that modems flashed ok
Repulsa said:
Okey Im guessing you have the new bootloader since you said "knox" try to download and extract this and flash the http://www.mediafire.com/download/hdzf6fbobotxi61/GSM_Modem_XXUEML4_and_LTE_Modem_XXUML4.rar file with odin by selecting phone. This is a fix only but if the problem still persist feel free to flash the file that other guy gave you. im only giving you this fix just because alot of people had this problem that got fixed.Go to Settings and make sure that modems flashed ok
Click to expand...
Click to collapse
Ok no worries. I've already flashed the other firmware that the other person gave me. I'm now flashing this modem as the sound didn't work still. I didn't have Knox until I downloaded the firmware the other person suggested to download. I don't care about voiding Knox as I don't need it or use it.
I'll see what happens when I flash this modem. Thanks!
Ok, so far I've flashed the Official Stock Firmware XXUBMG4. I then flashed the GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.tar. I then flashed the OPS 4.3 Firmware with Knox, I then flashed the XXUML4 Modem. None of this has fixed the sound, I'm not also getting random reboots every 30 secs or so.
So frustrating!! Why so complicated :S :S
Duplicate post
Robotic4 said:
Ok no worries. I've already flashed the other firmware that the other person gave me. I'm now flashing this modem as the sound didn't work still. I didn't have Knox until I downloaded the firmware the other person suggested to download. I don't care about voiding Knox as I don't need it or use it.
I'll see what happens when I flash this modem. Thanks!
Click to expand...
Click to collapse
If you just got a new bootloader aka Knox warranty Void that's okey , flashing any modem wont void your warranty . But if you flash a custom rom/Root then its over.If your knox got void means no more warranty for your device. Have a nice day.
Robotic4 said:
Duplicate post
Click to expand...
Click to collapse
* #1234# to check software version of phone and pls make us a screenshot again (button power+button home)
Joku1981 said:
* #1234# to check software version of phone and pls make us a screenshot again (button power+button home)
Click to expand...
Click to collapse
So I got the boot up sound after trying I9505XXUEMK9_WiFi_FIX.tar. But then I switched the phone off to insert my SIM Card and booted up to no sound and no sound on anything..
Robotic4 said:
So I got the boot up sound after trying I9505XXUEMK9_WiFi_FIX.tar. But then I switched the phone off to insert my SIM Card and booted up to no sound and no sound on anything..
Click to expand...
Click to collapse
That's good to hear ti works check your msg and let me know here.
Repulsa said:
That's good to hear ti works check your msg and let me know here.
Click to expand...
Click to collapse
hey, i'm having the same issue, what did you suggest... plz help me too:crying:
Repulsa said:
That's good to hear ti works check your msg and let me know here.
Click to expand...
Click to collapse
Yeah still not working. I've tried different versions of Odin and run them as administrator in windows. I've tried 2 USB Cables also, Is it something to do with the PIT file? I was reading something about it from here:
http://forum.cyanogenmod.com/topic/79112-i9505-no-sound-cant-make-calls-or-receive/page__st__20
Robotic4 said:
So I got the boot up sound after trying I9505XXUEMK9_WiFi_FIX.tar. But then I switched the phone off to insert my SIM Card and booted up to no sound and no sound on anything..
Click to expand...
Click to collapse
If u still having MK9 firmware installed in your phone:
Download and unrar this FILE
Use Odin
Untick Autoreboot
Flash modem (the file u downloaded in step one (.tar))
Put off ur battery and put in again
Reboot into Download Mode (Vol Down + Home button combi)
Flash Modem once more
Put off ur battery and put in again
Once done, unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
I have the same problem.I flashed MFK modem over MK9 and I have no sound and I cant even make a call !!! I tried to reflash rom and also make a full wipe but nothing helped.PLease help
---------- Post added at 08:34 PM ---------- Previous post was at 08:19 PM ----------
I JUST HAD TO FLASH THIS MODEM TO GET IT FIXED !!
http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMKF_and_LTE_Modem_XXUBMH1.rar
kadett-k2 said:
I have the same problem.I flashed MFK modem over MK9 and I have no sound and I cant even make a call !!! I tried to reflash rom and also make a full wipe but nothing helped.PLease help
---------- Post added at 08:34 PM ---------- Previous post was at 08:19 PM ----------
I JUST HAD TO FLASH THIS MODEM TO GET IT FIXED !!
http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMKF_and_LTE_Modem_XXUBMH1.rar
Click to expand...
Click to collapse
Glad that file help's you mate. and yes flashing a wrong Wifi/LTE fix will break your sound on old bootloader.
I have a sprint galaxy s4 running cyanogenmod 11. I just bought the phone from someone. I went and got a new SIM for the device and tried to activate online. Did not work. I opened chat window with sprint and they put in the device's numbers and sim card number and asked me to make a test call, which did not work. They then asked me to type in ##72786#. They said it would auto reboot the device. It did nothing. They then started asking questions about if this was a used device. Obviously I don't want to have to go to the sprint store, I'm sure they would tell me they cannot activate a modded device.
Can anyone tell me how to activate?
edit: also had me enter ##659143# and said it should bring up a menu screen. It did nothing
Pretty sure those codes won't do anything unless you're on a TW based rom. I would flash the stock rom, then call and try to activate.
(And please remember questions go in the Q&A section)
Sent from my SPH-L720 using Tapatalk 2
As said above you'll need a touchwiz rom to get activated. I had the same problem when I got my phone.
Beezer80 said:
As said above you'll need a touchwiz rom to get activated. I had the same problem when I got my phone.
Click to expand...
Click to collapse
Thanks. I really like this rom and how its performing... can you please point me to a tutorial on how to bring back to stock, then to reinstall the same rom after activation? Person I got it from said the files are on the sd card
Download a touchwiz rom to your SD card. Boot into recovery and make a backup of your current setup. Then flash the touhwiz ROM. Activate your phone then boot back into recovery and restore your CM11 ROM.
Beezer80 said:
Download a touchwiz rom to your SD card. Boot into recovery and make a backup of your current setup. Then flash the touhwiz ROM. Activate your phone then boot back into recovery and restore your CM11 ROM.
Click to expand...
Click to collapse
Where do I get touchwiz? Cannot find it on google or xda.
You really need to learn ALOT before you start using a rooted phone. And flashing.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Touch wiz refers to any Samsung bloated ROM. There are numerous ones in the development section.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
You really need to learn ALOT before you start using a rooted phone. And flashing.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Touch wiz refers to any Samsung bloated ROM. There are numerous ones in the development section.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
What's done is done, I have a rooted phone. At this point I need to get through this. All help is appreciated.
I used a youtube tutorial, downloaded touchwiz and odin. Tried to install but it hung up in the middle and failed install. Now won't install through odin and I get the error 'firmware upgrade encountered an issue. Please select recovery mode in kies & try again".
Installed Kies, went to tools>firmware upgrade initialization... but it keeps saying incorrect serial.
Any ideas?
Boot into Download Mode, post what the text is in the upper-left-hand corner. (after saying "yes" to the warning.) As long as you don't do anything with Odin nothing will download.
There's nothing in that text that has any personally identifiable information.
guyrelax said:
What's done is done, I have a rooted phone. At this point I need to get through this. All help is appreciated.
I used a youtube tutorial, downloaded touchwiz and odin. Tried to install but it hung up in the middle and failed install. Now won't install through odin and I get the error 'firmware upgrade encountered an issue. Please select recovery mode in kies & try again".
Installed Kies, went to tools>firmware upgrade initialization... but it keeps saying incorrect serial.
Any ideas?
Click to expand...
Click to collapse
First of all, what baseband version are you on? Mdc, mdl, mf9,mk2, mja? That is important to know. If on say mf9, then flash with odin a stock mf9, therevare plenty of videos on youtube as to how to use odin. As for the kies error page or wathever justbpull the battery and go into download mode again and start over again. If it only goes half way and stops try a different usb port and make sure you are using the factory original usb cable, I had that same problem you describe of the kies error and itvwas the usb port. Give it a try, just take your time and don't loose your patience. Odin is pretty safe but at the same time you do not want to mess up. Triple check your settings and make surebyou have the right files. Good luck sorry about the typos.
---------- Post added at 04:33 AM ---------- Previous post was at 04:27 AM ----------
http://forum.xda-developers.com/showthread.php?t=2303917
Link to all roms, just scroll down to the stock touchwiz roms and choose the one you need.
matraca said:
First of all, what baseband version are you on? Mdc, mdl, mf9,mk2, mja? That is important to know. If on say mf9, then flash with odin a stock mf9, therevare plenty of videos on youtube as to how to use odin. As for the kies error page or wathever justbpull the battery and go into download mode again and start over again. If it only goes half way and stops try a different usb port and make sure you are using the factory original usb cable, I had that same problem you describe of the kies error and itvwas the usb port. Give it a try, just take your time and don't loose your patience. Odin is pretty safe but at the same time you do not want to mess up. Triple check your settings and make surebyou have the right files. Good luck sorry about the typos.
---------- Post added at 04:33 AM ---------- Previous post was at 04:27 AM ----------
http://forum.xda-developers.com/showthread.php?t=2303917
Link to all roms, just scroll down to the stock touchwiz roms and choose the one you need.
Click to expand...
Click to collapse
I also have the same issue with my secondary phone line that is an S4. I wasn't quite sure what the heck the issue was with my device since it was working perfectly fine in one month and then all of a sudden I can no longer dial out anymore! I was puzzled as all hell and was wondering whats going on? So i had thought instantly that its either needing a PRL Update or it has to upgrade the radio and at the time i had just literally updated the radio from MF9 i believe. everything worked BUT the phone line kept saying that wonderful "we are sorry but your account could NOT be validated" line and again and again didnt realize that untill reading this post that i didnt remember to upgrade to the latest firmware update. So your saying that is the issue? Doesn't a PRL update help some of those issues with connectivity as well right? that way if you wanted to downgrade your firmware in your radio you could still do so and just update your PRL correct me if i am wrong but i haven't messed with the issue in about 4-5 months so im a lil dusty and need some clarification. I also CANT find an option to Update the PRL in CM 11 at all and sprint had told me that was what i needed to do and i couldnt find that anywhere when i changed my number i basically got data connectivity ONLY... has the Update PRL option in CM11 become obsolete or removed? does just a radio firmware update solve all the connectivity issues? or i should say just most not all... Thank you too by the way I have been stumped and just needed another head to miss what was so an obvious issue if this works out to be the problem that has agitated me time and time again!
I am using the Note 4 N910G variant. I have rooted using CF Autoroot(5.0.1) and flashed CWM Recovery. I have also tried TWRP.
For some reason, I can't boot into Emotion Revolution ROM and most of the other ROMs would give me errors such as can't open file during installation.
I am seeing messages such as Recovery is not Seandroid enforcing and set warranty bit: kernel.
I have rooted and flashed ROMs before without a hitch many times. This is the first time I am coming across such problems. Forgive me for my ignorance I'll try my best to provide any extra information that is required to fix this issue.
Help would be greatly appreciated
Erm..anyone? I desperately need help fixing this!
BickWhale said:
Erm..anyone? I desperately need help fixing this!
Click to expand...
Click to collapse
Hi mate!
Can you please explain what have you done just before the problem started and what is happening now when you turn on the phone?
Can you boot into recovery?
_mone said:
Hi mate!
Can you please explain what have you done just before the problem started and what is happening now when you turn on the phone?
Can you boot into recovery?
Click to expand...
Click to collapse
Thanks for the response by the way. Much appreciated I used CF AutoRoot and rooted my phone with Odin V3.07. Pretty much followed the steps here
http://galaxynote4root.com/galaxy-note-4-root/how-to-root-galaxy-note-4/
My phone worked just fine after the root. I went on to flash a custom recovery. (TWRP) and it went without a hitch. After which, I wiped my phone and flashed a custom ROM (Without backing up which was foolish, I know..)
http://www.emo-troid.com/tw-rom-downloads.html
Now, everytime I try to boot my phone, I would just get stuck in a bootloop. I can boot into recovery and download mode just fine for now.
Did you flash (via odin) the right modem and bootloader for the rom that you want to use?
---------- Post added at 03:36 PM ---------- Previous post was at 03:23 PM ----------
Download and extract this: N910GDTU1BOF1_Bootloader_Modem.tar.zip than flash the .tar.md5 file via odin.
_mone said:
Did you flash (via odin) the right modem and bootloader for the rom that you want to use?
---------- Post added at 03:36 PM ---------- Previous post was at 03:23 PM ----------
Download and extract this: N910GDTU1BOF1_Bootloader_Modem.tar.zip than flash the .tar.md5 file via odin.
Click to expand...
Click to collapse
Alright, I've flashed it. What now?
Now you should be able to boot into the rom..
_mone said:
Now you should be able to boot into the rom..
Click to expand...
Click to collapse
Still stuck in a bootloop with a yellow text at the top left corner saying set warranty unit: kernel. I've just flashed the same ROM I have linked earlier...
BickWhale said:
Still stuck in a bootloop with a yellow text at the top left corner saying set warranty unit: kernel. I've just flashed the same ROM I have linked earlier...
Click to expand...
Click to collapse
It doesn't show even the samsung boot animation?
_mone said:
It doesn't show even the samsung boot animation?
Click to expand...
Click to collapse
Oh it does, it shows me the Samsung Galaxy Note 4 Powered by Android text along with that tiny yellow text in the top left. It would constantly reboot into that screen, doesn't go beyond that.
BickWhale said:
Oh it does, it shows me the Samsung Galaxy Note 4 Powered by Android text along with that tiny yellow text in the top left. It would constantly reboot into that screen, doesn't go beyond that.
Click to expand...
Click to collapse
Did you wipe data/cache/dalvik/system before flashing the ROM?
If not, please try it. If yes and still bootloop try to download and flash a different ROM like this one.
Let us know.
_mone said:
Did you wipe data/cache/dalvik/system before flashing the ROM?
If not, please try it. If yes and still bootloop try to download and flash a different ROM like this one.
Let us know.
Click to expand...
Click to collapse
Alright. Apparently I can't use adb push for my CWM recovery. Any other way?
Edit: I have resolved the matter with the ABD push., had to simply replug my phone.
My phone booted up but is still in the Samsung animation. It got pass the Powered by Android galaxy Note 4 screen at least.
MY PHONE ****ING BOOTED INTO ANDROID. Thank you so much dude You have helped a stranger across the planet save 800 dollars, you're amazing
I'm happy that you fixed the problems with your note 4!
Enjoy your "reborn" phone!
SOLVED!! ALL CREDITS @[SIZE="7"]ashyx[/SIZE]
Original post:
To all the xda developers moderators and esteemed members: Thanks so much for making xda what it is.
My request is for CWM/TWRP for Samsung Galaxy A800I. Any help is greatly appreciated for compiling custom recovery for the Samsung Galaxy A800I.
Stock boot and recovery here and here courtesy of @AliSal member XDA and original poster for the post that I can credit for the eventual founding of a working root method for the phone. The root method for the phone all credits to @IzArsha posted here.
Click to expand...
Click to collapse
Solved!
It is here guys! Solved yesterday. I have just tested it. It works! At last we properly own our phones. Heheheheeeee....
Find the the download link in @ashyxs post (#5) below.
(Big UP @ashyx!!) Big Up Team Win!!
Much thanks to your test team too. Big Up @abhinavparasher, thanks buddy. We are forever grateful.
Much thanks to @IzArsha for root for same device. Much thanks too for all who participated in the thread.
For the feedback from @ashyx himself check out Post #5 below...
@ashyx
"Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
(SEE DOWNLOAD LINK FOR: twrp_3.0.0_sm-a800i_v1 BELOW)
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
MY BUILDS:
[ROOT]-cf-autoroot-twrp-Tab S
[ROOT] CF-autoroot - Galaxy Tab S2
[ROOT][cf-autroot][Tab S sm-t805s/k][Exynos 5433]
[ROOT]CFautoroot Tab A
[RECOVERY] TWRP 2.8.7.2 - TAB A sm-t710/715/810/825
[RECOVERY]Twrp-2.8.7.2-unofficial-sm-t700/705/800/805/807
[RECOVERY][UNOFFICIAL]Twrp-2.8.5.0-recovery-snapdragon-t805p
Click to expand...
Click to collapse
END OF QUOTE
Remember to thank and donate!!
cheupe said:
To all the xda developers moderators and esteemed members: Thanks so much for making xda what it is.
My request is for CWM/TWRP for Samsung Galaxy A800I. Any help is greatly appreciated for compiling custom recovery for the Samsung Galaxy A800I.
Stock boot and recovery here and here courtesy of @AliSal member XDA and original poster for the post that I can credit for the eventual founding of a working root method for the phone. The root method for the phone all credits to @IzArsha posted here.
Click to expand...
Click to collapse
Actually i can make the CWM or ported Philz to the device as im using it now, Philz, for my beta purpose. But i need some donation and i hope you all can wait until i am releasing a stable one. Thanks you
IzArsha said:
Actually i can make the CWM or ported Philz to the device as im using it now, Philz, for my beta purpose. But i need some donation and i hope you all can wait until i am releasing a stable one. Thanks you
Click to expand...
Click to collapse
Wow. That was fast! I have gone to your profile before and clicked on your donation link/URL, apparently it is not active for security reasons I guess so I copied it and it still does not work. So I have just sent you a private message momenta ago. Could you get back to me on PM?
cheupe said:
Wow. That was fast! I have gone to your profile before and clicked on your donation link/URL, apparently it is not active for security reasons I guess so I copied it and it still does not work. So I have just sent you a private message momenta ago. Could you get back to me on PM?
Click to expand...
Click to collapse
i've doing the root and the recovery on oct 2015, and planned to release the root somewhere on 2016 which is last few day, and yeap the cwm still on a beta purpose. ill release it when it is stable. wait a moment, let me check your pm.
TWRP v3.0.0-0 SM-A800I
cheupe said:
To all the xda developers moderators and esteemed members: Thanks so much for making xda what it is.
My request is for CWM/TWRP for Samsung Galaxy A800I. Any help is greatly appreciated for compiling custom recovery for the Samsung Galaxy A800I.
Click to expand...
Click to collapse
Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.0-0_sm-a800i
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
ashyx said:
Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.0_sm-a800i_v1
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
Il be glad to be a tester. Il flash the required file and send a detailed report if it works or not. (In about 12 hours).
ashyx said:
Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.0_sm-a800i_v1
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
The recovery you provided works just fine! There was no issue booting up the phone, i havn't tried to flash a zip file with it yet, but i think it will work.
Other options like terminal and adb open up correctly on the local machine, and there is no reason for them to give issues when actually used for side loading and command input.
I have a recovery.log file if needed.
Thanks a lot, that was the first recovery for Galaxy A8 Sm-A800i.
I request @cheupe to move the post to the top and change the status to solved. All credits to @ashyx for successfully compiling the recovery.
Note - Flashing this recovery, or anything other than stock, might make your wifi to stop remembering passwords on reboot. (Only if you have flashed a custom boot.img /kernel). Flashing only the recovery without other modifications should theoretically not cause the issue.
Solution-
Open up system/build.prop, find "ro.securestorage.support=true" and change the "true" to "false" and reboot. Enter your wifi passwords once again and it should be permanant even after reboot.
abhinavparasher said:
The recovery you provided works just fine! There was no issue booting up the phone, i havn't tried to flash a zip file with it yet, but i think it will work.
Other options like terminal and adb open up correctly on the local machine, and there is no reason for them to give issues when actually used for side loading and command input.
Thanks a lot, that was the first recovery for Galaxy A8 Sm-A800i.
I request @cheupe to move the post to the top and change the status to solved. All credits to @ashyx for successfully compiling the recovery.
Note - Flashing this recovery, or anything other than stock, might make your wifi to stop remembering passwords on reboot.
Open up system/build.prop, find "ro.securestorage.support=true" and change the "true" to "false" and reboot. Enter your wifi passwords once again and it should be permanant even after reboot.
Click to expand...
Click to collapse
Thanks for the feedback, glad it works. Now you guys have the door open for custom roms and root. I will officially release this to XDA if you are happy everything is working.
Regarding your note on the wifi, Recovery shouldn't affect the wifi. Custom kernels that dont have the "ro.securestorage.support=false" set usually have this issue. However that can be fixed.
Did you have an issue with wifi as that is a new one on me with custom recovery?
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
ashyx said:
Thanks for the feedback, glad it works. Now you guys have the door open for custom roms and root. I will officially release this to XDA if you are happy everything is working.
Regarding your note on the wifi, Recovery shouldn't affect the wifi. Custom kernels that dont have the "ro.securestorage.support=false" set usually have this issue. However that can be fixed.
Did you have an issue with wifi as that is a new one on me with custom recovery?
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
The wifi problem occurs everytime i flash something that is not stock. Flashing a custom boot.img for root caused the issue. It was fixed with tweaking the build.prop.
Now everytime i flash anything, be it boot or recovery via odin, i have to tweak the build file. The only exception to this is flashing the stock firmwhere.
---------- Post added at 04:53 PM ---------- Previous post was at 04:45 PM ----------
ashyx said:
Thanks for the feedback, glad it works. Now you guys have the door open for custom roms and root. I will officially release this to XDA if you are happy everything is working.
Regarding your note on the wifi, Recovery shouldn't affect the wifi. Custom kernels that dont have the "ro.securestorage.support=false" set usually have this issue. However that can be fixed.
Did you have an issue with wifi as that is a new one on me with custom recovery?
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
Well as the issue was probably caused by the modified boot.img, its gonna occur only for those who have rooted their phones using that particular method. I am pretty sure flashing just the recovery you provided will not cause the issue. The note was for who are here after rooting. I still dont get it why the build file changes when i flashed the recovery, even though i had tweaked it and not touched the kernel after that. I dont understand the reason for it to change back to true after flashing something such as a recovery.
abhinavparasher said:
The wifi problem occurs everytime i flash something that is not stock. Flashing a custom boot.img for root caused the issue. It was fixed with tweaking the build.prop.
Now everytime i flash anything, be it boot or recovery via odin, i have to tweak the build file. The only exception to this is flashing the stock firmwhere.
---------- Post added at 04:53 PM ---------- Previous post was at 04:45 PM ----------
Well as the issue was probably caused by the modified boot.img, its gonna occur only for those who have rooted their phones using that particular method. I am pretty sure flashing just the recovery you provided will not cause the issue. The note was for who are here after rooting. I still dont get it why the build file changes when i flashed the recovery, even though i had tweaked it and not touched the kernel after that. I dont understand the reason for it to change back to true after flashing something such as a recovery.
Click to expand...
Click to collapse
Strange I've never heard of that before, I don't see how flashing a custom recovery affects the build.prop they are totally unrelated? Ah well stranger things have happened. :silly:
Custom kernel posted.
ashyx said:
Strange I've never heard of that before, I don't see how flashing a custom recovery affects the build.prop they are totally unrelated? Ah well stranger things have happened. :silly:
Custom kernel posted.
Click to expand...
Click to collapse
I concur. Thats strange to say at the least. Why would flashing something after flashing a custom kernel change the build.prop. I guess, somethings are just the way they are :angel:
abhinavparasher said:
I concur. Thats strange to say at the least. Why would flashing something after flashing a custom kernel change the build.prop. I guess, somethings are just the way they are :angel:
Click to expand...
Click to collapse
Official release of TWRP in Development section: http://forum.xda-developers.com/sam...recovery-samsung-sm-a800i-exynos5433-t3312809
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Help
I accidentally flash wrong file after i install recorvery and now its on boot loop
What should i do ;-;
theheartbenvn said:
Help
I accidentally flash wrong file after i install recorvery and now its on boot loop
What should i do ;-;
Click to expand...
Click to collapse
What did you flash?
You can recover by flashing stock firmware.
NOTE: One of the main reasons for flashing custom recovery is to make a full backup of your device.
ALWAYS ensure this is done BEFORE flashing custom stuff.
ashyx said:
What did you flash?
You can recover by flashing stock firmware.
NOTE: One of the main reasons for flashing custom recovery is to make a full backup of your device.
ALWAYS ensure this is done BEFORE flashing custom stuff.
Click to expand...
Click to collapse
So... i kinda forgot Cheupe's warning, and accidentally flash the Xposed v22 x64 file. Now i only got boot loop, but still bootable to recovery
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
Im kinda newbie at this, so forgive me
So now i have to install firmware ( 1,3 gb ) and flash it via odin on PDA tab, right?
theheartbenvn said:
So... i kinda forgot Cheupe's warning, and accidentally flash the Xposed v22 x64 file. Now i only got boot loop, but still bootable to recovery
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
Im kinda newbie at this, so forgive me
Click to expand...
Click to collapse
Try flashing the corresponding uninstall x64 zip. It will reverse all the steps that the install did. Good luck.
cheupe said:
Try flashing the corresponding uninstall x64 zip. It will reverse all the steps that the install did. Good luck.
Click to expand...
Click to collapse
How to do that? Im using twrp
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
theheartbenvn said:
How to do that? Im using twrp
Click to expand...
Click to collapse
Oh... nevermind. I get it, download the uninstall file from their official page... got it
theheartbenvn said:
How to do that? Im using twrp
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
Oh... nevermind. I get it, download the uninstall file from their official page... got it
Click to expand...
Click to collapse
Yes buddy. Please update us on whether it works. I have been away and I am just seeing all this now. I want to flash the recovery right away.
Currently i'm sending from my old phone so there's no "quotie quotie"
So, i did all you ask. The phone doesn't bootloop anymore. Thanks, although i have to leave it there for 6 mins until it starts booting up
Much appreciated your help
Hey guys,
I'm hoping someone can point me in the right direction.
Tried flashing the G925F with the latest firmware, but the phone is stuff on the boot logo and wont move past it.
I can ONLY access download mode, recovery mode is unavailable. I've looked for a bootloader but theres so many versions all over the place and I dont want to pick the wrong one.
G925FXXU6ERF5 is the phone with the following details:
UK XEU CSC running Android 7.0 (well supposed to be lol)
The amount of threads I've gone through end up with the end of having users PM'ing each other for the answer or 'search for the answer'
So any help would be grateful.
royds said:
Hey guys,
I'm hoping someone can point me in the right direction.
Tried flashing the G925F with the latest firmware, but the phone is stuff on the boot logo and wont move past it.
I can ONLY access download mode, recovery mode is unavailable. I've looked for a bootloader but theres so many versions all over the place and I dont want to pick the wrong one.
G925FXXU6ERF5 is the phone with the following details:
UK XEU CSC running Android 7.0 (well supposed to be lol)
The amount of threads I've gone through end up with the end of having users PM'ing each other for the answer or 'search for the answer'
So any help would be grateful.
Click to expand...
Click to collapse
OK, got some progress. After reading a similar issue I followed a guide on installing TWRP recovery and was finally able to boot into some kind of recovery mode. Now I'm just stuck with what to do hahaha. Its just strange that when I flash with Odin with the official firmware in the AP, I cant access the recovery mode, but flashing with TWRP the their recovery mode works perfectly.
Update, after a lot of searching on youtube and forums etc, was able to find out the data section was read as 0MB so wiped the storage via change the format of the storage then changing it back. This was able to make the data storage read correctly.
Installed the correct firmware which I had tried before, but this time the phone went through the update and was able to go through a full set up.
Just typing out this info for anyone else having the same issues.
My s6 edge is dead, doesnt boot stock recovery only twrp. Gets frozen after 2 minutes, I can use twrp but i have to be fast. tried reinstalling with odin nothing. IS your phone working now, if it is what did u do exactly
---------- Post added at 09:14 PM ---------- Previous post was at 09:11 PM ----------
xperiaking247 said:
My s6 edge is dead, doesnt boot stock recovery only twrp. Gets frozen after 2 minutes, I can use twrp but i have to be fast. tried reinstalling with odin nothing. IS your phone working now, if it is what did u do exactly
Click to expand...
Click to collapse
ALSO EDIT it doesnt work AT ALL if its without usb cable
xperiaking247 said:
My s6 edge is dead, doesnt boot stock recovery only twrp. Gets frozen after 2 minutes, I can use twrp but i have to be fast. tried reinstalling with odin nothing. IS your phone working now, if it is what did u do exactly
---------- Post added at 09:14 PM ---------- Previous post was at 09:11 PM ----------
ALSO EDIT it doesnt work AT ALL if its without usb cable
Click to expand...
Click to collapse
After I got it working it did a bunch of updates but then stopped working.. back with the boot loop and failing to get to normal recovery. Only twrp works perfectly. If yours works only with usb attached I'd say it could be the battery or something linked to the battery.