SOLVED!! ALL CREDITS @[SIZE="7"]ashyx[/SIZE]
Original post:
To all the xda developers moderators and esteemed members: Thanks so much for making xda what it is.
My request is for CWM/TWRP for Samsung Galaxy A800I. Any help is greatly appreciated for compiling custom recovery for the Samsung Galaxy A800I.
Stock boot and recovery here and here courtesy of @AliSal member XDA and original poster for the post that I can credit for the eventual founding of a working root method for the phone. The root method for the phone all credits to @IzArsha posted here.
Click to expand...
Click to collapse
Solved!
It is here guys! Solved yesterday. I have just tested it. It works! At last we properly own our phones. Heheheheeeee....
Find the the download link in @ashyxs post (#5) below.
(Big UP @ashyx!!) Big Up Team Win!!
Much thanks to your test team too. Big Up @abhinavparasher, thanks buddy. We are forever grateful.
Much thanks to @IzArsha for root for same device. Much thanks too for all who participated in the thread.
For the feedback from @ashyx himself check out Post #5 below...
@ashyx
"Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
(SEE DOWNLOAD LINK FOR: twrp_3.0.0_sm-a800i_v1 BELOW)
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
MY BUILDS:
[ROOT]-cf-autoroot-twrp-Tab S
[ROOT] CF-autoroot - Galaxy Tab S2
[ROOT][cf-autroot][Tab S sm-t805s/k][Exynos 5433]
[ROOT]CFautoroot Tab A
[RECOVERY] TWRP 2.8.7.2 - TAB A sm-t710/715/810/825
[RECOVERY]Twrp-2.8.7.2-unofficial-sm-t700/705/800/805/807
[RECOVERY][UNOFFICIAL]Twrp-2.8.5.0-recovery-snapdragon-t805p
Click to expand...
Click to collapse
END OF QUOTE
Remember to thank and donate!!
cheupe said:
To all the xda developers moderators and esteemed members: Thanks so much for making xda what it is.
My request is for CWM/TWRP for Samsung Galaxy A800I. Any help is greatly appreciated for compiling custom recovery for the Samsung Galaxy A800I.
Stock boot and recovery here and here courtesy of @AliSal member XDA and original poster for the post that I can credit for the eventual founding of a working root method for the phone. The root method for the phone all credits to @IzArsha posted here.
Click to expand...
Click to collapse
Actually i can make the CWM or ported Philz to the device as im using it now, Philz, for my beta purpose. But i need some donation and i hope you all can wait until i am releasing a stable one. Thanks you
IzArsha said:
Actually i can make the CWM or ported Philz to the device as im using it now, Philz, for my beta purpose. But i need some donation and i hope you all can wait until i am releasing a stable one. Thanks you
Click to expand...
Click to collapse
Wow. That was fast! I have gone to your profile before and clicked on your donation link/URL, apparently it is not active for security reasons I guess so I copied it and it still does not work. So I have just sent you a private message momenta ago. Could you get back to me on PM?
cheupe said:
Wow. That was fast! I have gone to your profile before and clicked on your donation link/URL, apparently it is not active for security reasons I guess so I copied it and it still does not work. So I have just sent you a private message momenta ago. Could you get back to me on PM?
Click to expand...
Click to collapse
i've doing the root and the recovery on oct 2015, and planned to release the root somewhere on 2016 which is last few day, and yeap the cwm still on a beta purpose. ill release it when it is stable. wait a moment, let me check your pm.
TWRP v3.0.0-0 SM-A800I
cheupe said:
To all the xda developers moderators and esteemed members: Thanks so much for making xda what it is.
My request is for CWM/TWRP for Samsung Galaxy A800I. Any help is greatly appreciated for compiling custom recovery for the Samsung Galaxy A800I.
Click to expand...
Click to collapse
Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.0-0_sm-a800i
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
ashyx said:
Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.0_sm-a800i_v1
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
Il be glad to be a tester. Il flash the required file and send a detailed report if it works or not. (In about 12 hours).
ashyx said:
Just passing through and saw this, so to kill a little time :
Latest TWRP v3.0.0-0 for the Samsung Galaxy SM-A800I.
NOTE:
This is a test build and requires a tester who knows how to flash with Odin and recover if required.
It may boot it may not, it sometimes takes a few tries to get the configuration right as I don't own this device.
If it doesn't boot take close note of what happens and describe in detail.
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.0_sm-a800i_v1
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
The recovery you provided works just fine! There was no issue booting up the phone, i havn't tried to flash a zip file with it yet, but i think it will work.
Other options like terminal and adb open up correctly on the local machine, and there is no reason for them to give issues when actually used for side loading and command input.
I have a recovery.log file if needed.
Thanks a lot, that was the first recovery for Galaxy A8 Sm-A800i.
I request @cheupe to move the post to the top and change the status to solved. All credits to @ashyx for successfully compiling the recovery.
Note - Flashing this recovery, or anything other than stock, might make your wifi to stop remembering passwords on reboot. (Only if you have flashed a custom boot.img /kernel). Flashing only the recovery without other modifications should theoretically not cause the issue.
Solution-
Open up system/build.prop, find "ro.securestorage.support=true" and change the "true" to "false" and reboot. Enter your wifi passwords once again and it should be permanant even after reboot.
abhinavparasher said:
The recovery you provided works just fine! There was no issue booting up the phone, i havn't tried to flash a zip file with it yet, but i think it will work.
Other options like terminal and adb open up correctly on the local machine, and there is no reason for them to give issues when actually used for side loading and command input.
Thanks a lot, that was the first recovery for Galaxy A8 Sm-A800i.
I request @cheupe to move the post to the top and change the status to solved. All credits to @ashyx for successfully compiling the recovery.
Note - Flashing this recovery, or anything other than stock, might make your wifi to stop remembering passwords on reboot.
Open up system/build.prop, find "ro.securestorage.support=true" and change the "true" to "false" and reboot. Enter your wifi passwords once again and it should be permanant even after reboot.
Click to expand...
Click to collapse
Thanks for the feedback, glad it works. Now you guys have the door open for custom roms and root. I will officially release this to XDA if you are happy everything is working.
Regarding your note on the wifi, Recovery shouldn't affect the wifi. Custom kernels that dont have the "ro.securestorage.support=false" set usually have this issue. However that can be fixed.
Did you have an issue with wifi as that is a new one on me with custom recovery?
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
ashyx said:
Thanks for the feedback, glad it works. Now you guys have the door open for custom roms and root. I will officially release this to XDA if you are happy everything is working.
Regarding your note on the wifi, Recovery shouldn't affect the wifi. Custom kernels that dont have the "ro.securestorage.support=false" set usually have this issue. However that can be fixed.
Did you have an issue with wifi as that is a new one on me with custom recovery?
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
The wifi problem occurs everytime i flash something that is not stock. Flashing a custom boot.img for root caused the issue. It was fixed with tweaking the build.prop.
Now everytime i flash anything, be it boot or recovery via odin, i have to tweak the build file. The only exception to this is flashing the stock firmwhere.
---------- Post added at 04:53 PM ---------- Previous post was at 04:45 PM ----------
ashyx said:
Thanks for the feedback, glad it works. Now you guys have the door open for custom roms and root. I will officially release this to XDA if you are happy everything is working.
Regarding your note on the wifi, Recovery shouldn't affect the wifi. Custom kernels that dont have the "ro.securestorage.support=false" set usually have this issue. However that can be fixed.
Did you have an issue with wifi as that is a new one on me with custom recovery?
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
Well as the issue was probably caused by the modified boot.img, its gonna occur only for those who have rooted their phones using that particular method. I am pretty sure flashing just the recovery you provided will not cause the issue. The note was for who are here after rooting. I still dont get it why the build file changes when i flashed the recovery, even though i had tweaked it and not touched the kernel after that. I dont understand the reason for it to change back to true after flashing something such as a recovery.
abhinavparasher said:
The wifi problem occurs everytime i flash something that is not stock. Flashing a custom boot.img for root caused the issue. It was fixed with tweaking the build.prop.
Now everytime i flash anything, be it boot or recovery via odin, i have to tweak the build file. The only exception to this is flashing the stock firmwhere.
---------- Post added at 04:53 PM ---------- Previous post was at 04:45 PM ----------
Well as the issue was probably caused by the modified boot.img, its gonna occur only for those who have rooted their phones using that particular method. I am pretty sure flashing just the recovery you provided will not cause the issue. The note was for who are here after rooting. I still dont get it why the build file changes when i flashed the recovery, even though i had tweaked it and not touched the kernel after that. I dont understand the reason for it to change back to true after flashing something such as a recovery.
Click to expand...
Click to collapse
Strange I've never heard of that before, I don't see how flashing a custom recovery affects the build.prop they are totally unrelated? Ah well stranger things have happened. :silly:
Custom kernel posted.
ashyx said:
Strange I've never heard of that before, I don't see how flashing a custom recovery affects the build.prop they are totally unrelated? Ah well stranger things have happened. :silly:
Custom kernel posted.
Click to expand...
Click to collapse
I concur. Thats strange to say at the least. Why would flashing something after flashing a custom kernel change the build.prop. I guess, somethings are just the way they are :angel:
abhinavparasher said:
I concur. Thats strange to say at the least. Why would flashing something after flashing a custom kernel change the build.prop. I guess, somethings are just the way they are :angel:
Click to expand...
Click to collapse
Official release of TWRP in Development section: http://forum.xda-developers.com/sam...recovery-samsung-sm-a800i-exynos5433-t3312809
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Help
I accidentally flash wrong file after i install recorvery and now its on boot loop
What should i do ;-;
theheartbenvn said:
Help
I accidentally flash wrong file after i install recorvery and now its on boot loop
What should i do ;-;
Click to expand...
Click to collapse
What did you flash?
You can recover by flashing stock firmware.
NOTE: One of the main reasons for flashing custom recovery is to make a full backup of your device.
ALWAYS ensure this is done BEFORE flashing custom stuff.
ashyx said:
What did you flash?
You can recover by flashing stock firmware.
NOTE: One of the main reasons for flashing custom recovery is to make a full backup of your device.
ALWAYS ensure this is done BEFORE flashing custom stuff.
Click to expand...
Click to collapse
So... i kinda forgot Cheupe's warning, and accidentally flash the Xposed v22 x64 file. Now i only got boot loop, but still bootable to recovery
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
Im kinda newbie at this, so forgive me
So now i have to install firmware ( 1,3 gb ) and flash it via odin on PDA tab, right?
theheartbenvn said:
So... i kinda forgot Cheupe's warning, and accidentally flash the Xposed v22 x64 file. Now i only got boot loop, but still bootable to recovery
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
Im kinda newbie at this, so forgive me
Click to expand...
Click to collapse
Try flashing the corresponding uninstall x64 zip. It will reverse all the steps that the install did. Good luck.
cheupe said:
Try flashing the corresponding uninstall x64 zip. It will reverse all the steps that the install did. Good luck.
Click to expand...
Click to collapse
How to do that? Im using twrp
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
theheartbenvn said:
How to do that? Im using twrp
Click to expand...
Click to collapse
Oh... nevermind. I get it, download the uninstall file from their official page... got it
theheartbenvn said:
How to do that? Im using twrp
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
Oh... nevermind. I get it, download the uninstall file from their official page... got it
Click to expand...
Click to collapse
Yes buddy. Please update us on whether it works. I have been away and I am just seeing all this now. I want to flash the recovery right away.
Currently i'm sending from my old phone so there's no "quotie quotie"
So, i did all you ask. The phone doesn't bootloop anymore. Thanks, although i have to leave it there for 6 mins until it starts booting up
Much appreciated your help
Related
**EDIT**
This issue was solved for myself and another member here by tracking down the appropriate latest stock firmware for our regions and flashing it with Odin. Note that it took multiple flashes of the same firmware in Odin before it was actually fixed.
**Original Post**
Hi All,
I have a SGH-I337M from Rogers (Canada) and I'm having a hell of a time getting my phone working again. Here's the complete history. I originally took it from stock 4.2.2 to 4.4 Gummy ROM. Everything was working fine with that. I then found out about the easy sim unlock with the stock touchwiz ROM, so I plugged it into Kies to restore it to factory. However, I didn't realize (about a week ago) that they were rolling out the 4.3 update, so lo and behold I wound up with 4.3.
The unlock method was not working on this, so I got hold of the 4.2.2 official ROM and flashed it with Odin. It was at this time that I realized the 4.3 update included the knox bootloader (I think that's the bootloader? I'm still pretty green with this stuff), so of course I wind up with persisting flags showing warranty void, kernel is not seapermissive or whatever the error is, etc etc. ALSO, it was at the time of the 4.3 update that I realized wifi and sound do not work anymore. I flashed back to the Gummy rom, wifi starts working again but not sound.
PHEW, if you made it through that, thanks for your time! Anyway I'm now back at 4.2.2 because I figured I'd try the unlocking at least and... it doesn't work. I read from others that the wifi and sound not working had to do with the modem firmware not matching what the kernel expects, so I took my wifes phone (which is still running 4.2.2 and the unlock worked, also a SGH-I337M), ran the following:
Code:
su
cd mnt/sdcard/
dd if=/dev/block/mmcblk0p1 of=backup-NON-HLOS.bin
dd if=/dev/block/mmcblk0p2 of=backup-modem.bin
Copied those dumps, wrote them to my busted phone with:
Code:
su
dd if=NON-HLOS.bin of=/dev/block/mmcblk0p1
dd if=modem.bin of=/dev/block/mmcblk0p2
reboot
And.... all that to no avail. I'm literally just fumbling through this now because this stuff is going beyond the scope of what I know. Anyone who can help or point me in the right direction would be most appreciated! Thanks for your time!
Fixed
Alright so, as I mentioned the official rogers 4.3 update over Kies is what I believe caused these problems in the first place. What I did however was get hold of the latest official build from this link (RWC-I337MVLUEMK6-20131125124040) and flash it in Odin. Oddly enough after the flash, all is working. Perhaps there is a broken version being pushed out over Kies.
Stock Kernel After Install Cyanogenmod 11 | Kitkat | Build 8 | 29 Nov ]
I have many problems with my phone after install CM11, i follow the instructions step by step and the installation complete without any problems but,
First. I have, at turn on the phone in the first screen "Samsung Galaxy S4" there is something written in red at the top left corner : "KERNEL IS NOT SEANDROID ENFORCING" In yellow just above : "Set Warranty Bit : kernel"
I investigate that and this is call, stock kernel.
Second. The Wifi is tethering i can´t active, don´t work.
Third. the sound is @%&)*, i can hear nothing.
Fourth. The mic on the phone is dead too, i can do calls on my phone because the other person don´t hear me nothing.
Somebody knows how fix all of this problems or my phone is @%&)* forever?
Thanks anyway, i appreciated any kind of help. Merry Christmas and Happy holidays for all. God bless you.
Y4kk=_Sp4rr0w said:
I have many problems with my phone after install CM11, i follow the instructions step by step and the installation complete without any problems but,
First. I have, at turn on the phone in the first screen "Samsung Galaxy S4" there is something written in red at the top left corner : "KERNEL IS NOT SEANDROID ENFORCING" In yellow just above : "Set Warranty Bit : kernel"
I investigate that and this is call, stock kernel.
Second. The Wifi is tethering i can´t active, don´t work.
Third. the sound is @%&)*, i can hear nothing.
Fourth. The mic on the phone is dead too, i can do calls on my phone because the other person don´t hear me nothing.
Somebody knows how fix all of this problems or my phone is @%&)* forever?
Thanks anyway, i appreciated any kind of help. Merry Christmas and Happy holidays for all. God bless you.
Click to expand...
Click to collapse
Buddy! You're having the exact same problems I had. Can you tell me what carrier you are with and post your exact model here (like mine is SGH-i337M). The solution for me was to end up flashing (for the 4th or 5th time) the original stock touchwiz from branded by my carrier. The kernel warnings and such all went away, all sound and wifi works again (see my above posts). You might also be able to just flash the modem file for your phone, the CM version. Anyway post that stuff (exact model, carrier etc) and I'll see if I can help!
Furinax said:
Buddy! You're having the exact same problems I had. Can you tell me what carrier you are with and post your exact model here (like mine is SGH-i337M). The solution for me was to end up flashing (for the 4th or 5th time) the original stock touchwiz from branded by my carrier. The kernel warnings and such all went away, all sound and wifi works again (see my above posts). You might also be able to just flash the modem file for your phone, the CM version. Anyway post that stuff (exact model, carrier etc) and I'll see if I can help!
Click to expand...
Click to collapse
Thanks Furinax, i appreciated all the help could you give me, my phone is a Samsung Galaxy S4 SGH-I337M, mi carrier is Telcel in México, i tried to download the original ROM, the android version 4.3.3, but that you know, the FBI goes down Hotfile and SamMobile still upload all the ROM´s in Terafile, if you know another site where i can download this original ROM i thank you so much, my best regards.
Found it!
Y4kk=_Sp4rr0w said:
Thanks Furinax, i appreciated all the help could you give me, my phone is a Samsung Galaxy S4 SGH-I337M, mi carrier is Telcel in México, i tried to download the original ROM, the android version 4.3.3, but that you know, the FBI goes down Hotfile and SamMobile still upload all the ROM´s in Terafile, if you know another site where i can download this original ROM i thank you so much, my best regards.
Click to expand...
Click to collapse
Here ya go buddy, found it on terafile. Click this link here. ProTip! Use Bitcomet to do the HTTP download (copy the link once it starts downloading) and set the max connections to 20. This way you'll bypass the download throttle and download at full speed. Follow up and let me know if it works out for you!
In case you don't know, extract the zip, open Odin, click "PDA" and select the .md5 file you extracted. Put your phone into download mode by powering off and then powering on while holding the volume down rocker. It'll ask you to press volume up to confirm. Plug the phone in now and Odin will recognize the phone is ready for flashing (will say added! in the text field). Go ahead and click start. Note that this is a very big file so after you select it in Odin it will freeze for a while while it calculates the MD5 sum.
TCE-I337MUMUEMK6-20131128165859.zip
More Downloads
If anyone else is looking for their stock roms for SG4, most of them can be found at this link.
Furinax said:
Here ya go buddy, found it on terafile. Click this link here. ProTip! Use Bitcomet to do the HTTP download (copy the link once it starts downloading) and set the max connections to 20. This way you'll bypass the download throttle and download at full speed. Follow up and let me know if it works out for you!
In case you don't know, extract the zip, open Odin, click "PDA" and select the .md5 file you extracted. Put your phone into download mode by powering off and then powering on while holding the volume down rocker. It'll ask you to press volume up to confirm. Plug the phone in now and Odin will recognize the phone is ready for flashing (will say added! in the text field). Go ahead and click start. Note that this is a very big file so after you select it in Odin it will freeze for a while while it calculates the MD5 sum.
Thanks Furinax, i really appreciated your time and your help, i´m downloading already, i have philz recovery in the phone, do you reccomends do the flashing from philz or is better with Odin? i have the Odin v3.09, i hope fix my phone with this Original ROM, i will inform what happen, thanks again, my best regards, take care you.
---------- Post added at 01:12 PM ---------- Previous post was at 01:06 PM ----------
Furinax said:
If anyone else is looking for their stock roms for SG4, most of them can be found at
Thanks again Furinax, i will keep in contact, i will see what happens, my best regards.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Y4kk=_Sp4rr0w said:
Thanks Furinax, i really appreciated your time and your help, i´m downloading already, i have philz recovery in the phone, do you reccomends do the flashing from philz or is better with Odin? i have the Odin v3.09, i hope fix my phone with this Original ROM, i will inform what happen, thanks again, my best regards, take care you.
Click to expand...
Click to collapse
You can't flash it through recovery you have to use Odin and yes 3.09 should work fine. Make sure you extract the zip first and select the .md5 file that gets extracted from the zip. ALSO note that this will replace your custom recovery. I have not yet attempted to replace the stock recovery after flashing and fixing my phone, so I cannot tell you if it will work or not. At this point I'm just happy to have my phone working again so I'm not tampering and leaving it at stock. Also note that once you flash 4.3 the boot loader will be replaced so that if you tamper with the phone (flash anything new etc) it will permanently set a flag that you cannot change which indicates that your warranty is now void.
Stock Kernel Fix It but ....
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Furinax said:
You can't flash it through recovery you have to use Odin and yes 3.09 should work fine. Make sure you extract the zip first and select the .md5 file that gets extracted from the zip. ALSO note that this will replace your custom recovery. I have not yet attempted to replace the stock recovery after flashing and fixing my phone, so I cannot tell you if it will work or not. At this point I'm just happy to have my phone working again so I'm not tampering and leaving it at stock. Also note that once you flash 4.3 the boot loader will be replaced so that if you tamper with the phone (flash anything new etc) it will permanently set a flag that you cannot change which indicates that your warranty is now void.
Click to expand...
Click to collapse
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR]
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.[/QUOTE]
What happen Furinax, i´m very happy, after flashing my phone for second time, it fix all, my phone is back, i have WiFi, sound, and calls again, i learn the lesson, i will never flashing again with Customs RoM´s and i recommend to everyone don´t do it, thanks for helping me, have a great Christmas and a very vary happy new year, my best regards, salutes from Guadalajara, México, take care you, and god bless you.:good:
Y4kk=_Sp4rr0w said:
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR]
Hello Furinax, i download and flash the original ROM with Odin v3.09, the stock Kernel fix it, but the Wifi and the sound still tethering, don´t work both of them, do you recommend flashing again? Or what can i do? Thanks and we keep in contact.
Click to expand...
Click to collapse
What happen Furinax, i´m very happy, after flashing my phone for second time, it fix all, my phone is back, i have WiFi, sound, and calls again, i learn the lesson, i will never flashing again with Customs RoM´s and i recommend to everyone don´t do it, thanks for helping me, have a great Christmas and a very vary happy new year, my best regards, salutes from Guadalajara, México, take care you, and god bless you.:good:[/QUOTE]
Yay! Glad to hear it. Just gotta watch and read lots before flashing custom roms. Some phones are a pain in the rear, some are fine. Usually stick to flagship phones for this. For example the Nexus series from Google, never had an issue flashing any of those phones. Anyway buddy I'm glad to hear it's all working, merry Christmas and happy new year to you too and God bless you as well. Take care!
I am going through this right now as we speak. I bought a S4 I337M tonight locked to Telus and am trying to unlock it for bell.....it was on 4.3 so yeah I tripped the knox bootloader which is ok because I do not have warranty on the phone BUT I installed 4.2.2 and tried the unlocking and of course it does not seem possible on the Telus i337m .....I followed all suggestions to a T so we must have to pay for codes....
Anyways I lost wifi and sound so i used odin to push back telus factory firmware mk6 and still have no wifi and sound ? Any ideas?
I am currently using odin and pushing it once again , fingers crossed
Any tips on both the unlocking and regaining sound and wifi ? thanks
stevenca said:
I am going through this right now as we speak. I bought a S4 I337M tonight locked to Telus and am trying to unlock it for bell.....it was on 4.3 so yeah I tripped the knox bootloader which is ok because I do not have warranty on the phone BUT I installed 4.2.2 and tried the unlocking and of course it does not seem possible on the Telus i337m .....I followed all suggestions to a T so we must have to pay for codes....
Anyways I lost wifi and sound so i used odin to push back telus factory firmware mk6 and still have no wifi and sound ? Any ideas?
I am currently using odin and pushing it once again , fingers crossed
Any tips on both the unlocking and regaining sound and wifi ? thanks
Click to expand...
Click to collapse
Hey. So a couple of things. First, if you did the unlock process with the 4.2.2 rom, you unfortunately have to re flash the 4.2.2 rom and this time in the menu turn sim lock back on. Then, you can proceed to flash 4.3.3 and buy an unlock code. The reason you have to re flash and explicitly re - enable sim lock using the 4.2.2 menu is that once it fails, if you don't do that then even your purchased unlock code won't work!
So make sure you do that. I believe it's #*0101 then hit menu key, select back. Hit menu again, select number input, enter 1. Get the ddms main menu or whatever it's called where you can see network lock options and then select on instead of off. There is actually a video on YouTube of this exact issue and fix, I've just been moving for 4 days and am beat so if you get really stuck here I can find it tomorrow.
Once you do that re flash 4.3.3 with Odin but before you do, enter recover mode and wipe/factory reset/cache everything and of course ensure you are backed up first.
It has been my experience and others experience that you may need to re flash 4.3.3 multiple times before the wifi and other issues will be fixed. Don't panic, it'll work. Once you've got that all sorted, I bought my unlock codes (did this painful process on three sgh-1337m's) from cellunlocker.net and all went perfect. Let me know if you have any more questions!
Thanks! took 3 times to get back wifi and sound.....so odd.
I am now flashing 4.2 again and i will change the settings you mentioned back to locked than clear cache/factory wipe before going back to 4.3 and ordering my unlock code online....I dont understand why it works for some and not [email protected]!!!
stevenca said:
Thanks! took 3 times to get back wifi and sound.....so odd.
I am now flashing 4.2 again and i will change the settings you mentioned back to locked than clear cache/factory wipe before going back to 4.3 and ordering my unlock code online....I dont understand why it works for some and not [email protected]!!!
Click to expand...
Click to collapse
Glad you got sound/wifi back! As far as why it sometimes works, phone had to be shipped with 4.2.2. Once they get upgraded to 4.3, the functionality is gone for reasons I'm not 100% on so I won't shoot my mouth off like I'm an expert. Lol enjoy your unlocked phone once you get it all sorted!
After the second flashing works, be patient
Furinax said:
Hey. So a couple of things. First, if you did the unlock process with the 4.2.2 rom, you unfortunately have to re flash the 4.2.2 rom and this time in the menu turn sim lock back on. Then, you can proceed to flash 4.3.3 and buy an unlock code. The reason you have to re flash and explicitly re - enable sim lock using the 4.2.2 menu is that once it fails, if you don't do that then even your purchased unlock code won't work!
So make sure you do that. I believe it's #*0101 then hit menu key, select back. Hit menu again, select number input, enter 1. Get the ddms main menu or whatever it's called where you can see network lock options and then select on instead of off. There is actually a video on YouTube of this exact issue and fix, I've just been moving for 4 days and am beat so if you get really stuck here I can find it tomorrow.
Once you do that re flash 4.3.3 with Odin but before you do, enter recover mode and wipe/factory reset/cache everything and of course ensure you are backed up first.
It has been my experience and others experience that you may need to re flash 4.3.3 multiple times before the wifi and other issues will be fixed. Don't panic, it'll work. Once you've got that all sorted, I bought my unlock codes (did this painful process on three sgh-1337m's) from cellunlocker.net and all went perfect. Let me know if you have any more questions!
Click to expand...
Click to collapse
Hello stevenca, i reflash a second time with the original ROM and normalized, do the reflash for a second or third time with the original ROM of your phone and I guarantee it will work, Furinax help me a lot, have a happy new year. I will keep in contact if i can help you.
I need help. ASAP
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download mode and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and restored to stock. 4.2.2 stock Bell Canadian i337m. Please help i'm a noob. also when i turn on my phone it says in red text KERNEL IS NOT SEANDROID ENFORCING and underneath in yellow text it says SET WARRANTY BIT: KERNEL
Pavandeep Dhillon said:
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download mode and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and restored to stock. 4.2.2 stock Bell Canadian i337m. Please help i'm a noob. also when i turn on my phone it says in red text KERNEL IS NOT SEANDROID ENFORCING and underneath in yellow text it says SET WARRANTY BIT: KERNEL
Click to expand...
Click to collapse
- U cant come back of 4.3 to 4.2.2. And u cant restore ur DATA/boot of 4.2.2 to one new firmware 4.3 either
- U will have to install now TWRP for ex.
- Go to Recovery and wipe all (data, system, cache and dalvik cache)
- Reboot in Download Mode
- Flash this firmware by ODIN
- Take a look in XDA the terms im writing u (TWRP, Recovery, Download mode, ODIN, Flashing firmware). They are very important steps for solve ur problems :highfive:
Thank you very much i'll come back with the results.
---------- Post added at 05:08 PM ---------- Previous post was at 05:02 PM ----------
How do i get TWRP on to my phone?
---------- Post added at 05:15 PM ---------- Previous post was at 05:08 PM ----------
Nevermind, i got TWRP through goomanager but the link you gave me for 4.3 partially works, the link itself is working but when im on the page and click download it creates a download link that doesnt work
---------- Post added at 05:20 PM ---------- Previous post was at 05:15 PM ----------
Pavandeep Dhillon said:
Thank you very much i'll come back with the results.
---------- Post added at 05:08 PM ---------- Previous post was at 05:02 PM ----------
How do i get TWRP on to my phone?
---------- Post added at 05:15 PM ---------- Previous post was at 05:08 PM ----------
Nevermind, i got TWRP through goomanager but the link you gave me for 4.3 partially works, the link itself is working but when im on the page and click download it creates a download link that doesnt work
Click to expand...
Click to collapse
ok i have to be the most annoying poster, sorry. TWRP through goomanager didnt work so im stuck with no download and no TWRP.
---------- Post added at 05:35 PM ---------- Previous post was at 05:20 PM ----------
OK i got TWRP and wiped everything just waiting on link, thank you.
I did everything you said still doesnt work.
Hi guys, I will try and explain this as simple as possible.
I as trying to install cyanogenmod 11 on my phone, and everything seemed to go alright until I made a mistake. I used TWRP to first backup my stock rom on the phone, and then when I was supposed to reboot into the app, I accidently rebooted the phone.
Now the problem is that the phone does not have any OS installed, so what is happening is that it's trying to boot into an OS that's not there, and instead ends up being stuck on the Samsung logo. I can enter Odin mode just fine, but for the love of god I cannot seem to figure how to get back into the TWRP application, or if it is even possible.
I do have the backup of the ROM stored on my SD card, and I've now moved it over to my PC, but it still does not seem to help me in any way. I've trid to launch the Odin3 program on my pc, in an attempt to to try and launch in TWRP through that, but it has all been without any success, so now I come to this board of guinesses, asking for help!
As an added bit of information, this was my first time trying to install a custom rom, so yeah.. Puff..
- The lost Dane.
- Edit -
I tried to "flash" by doing what this link said, in the hopes that my phone would boot into the program, but alas, it only booted back to the logan saying "samsung Galaxy Note 3 SM-N9005" :/
http://forum.xda-developers.com/showthread.php?p=30694404
-- Edit Edit --
To make it super clear ... If I could get back into TWRP, I would be able to run my backup. I know how that app works, I just simply cannot get back into, and I do not know if it is even possible. I've searched and tried various guides to "flash TWRP through Odin" but it has all been without any success... :/
Thaelern said:
Hi guys, I will try and explain this as simple as possible.
I as trying to install cyanogenmod 11 on my phone, and everything seemed to go alright until I made a mistake. I used TWRP to first backup my stock rom on the phone, and then when I was supposed to reboot into the app, I accidently rebooted the phone.
Now the problem is that the phone does not have any OS installed, so what is happening is that it's trying to boot into an OS that's not there, and instead ends up being stuck on the Samsung logo. I can enter Odin mode just fine, but for the love of god I cannot seem to figure how to get back into the TWRP application, or if it is even possible.
I do have the backup of the ROM stored on my SD card, and I've now moved it over to my PC, but it still does not seem to help me in any way. I've trid to launch the Odin3 program on my pc, in an attempt to to try and launch in TWRP through that, but it has all been without any success, so now I come to this board of guinesses, asking for help!
As an added bit of information, this was my first time trying to install a custom rom, so yeah.. Puff..
- The lost Dane.
- Edit -
I tried to "flash" by doing what this link said, in the hopes that my phone would boot into the program, but alas, it only booted back to the logan saying "samsung Galaxy Note 3 SM-N9005" :/
http://forum.xda-developers.com/showthread.php?p=30694404
-- Edit Edit --
To make it super clear ... If I could get back into TWRP, I would be able to run my backup. I know how that app works, I just simply cannot get back into, and I do not know if it is even possible. I've searched and tried various guides to "flash TWRP through Odin" but it has all been without any success... :/
Click to expand...
Click to collapse
Did you hold volume up+home+power button to get into recovery mode?
In case your twrp get corrupted due to flashing failure previously
1. Download twrp from the following. 2.6.3.7 if you were running 4.3 or 2.6.3.8 if you were running 4.4.2(not sure if 2
6.3.8 is 4.3 compatible). For odin flashable use the one with .tar
http://www.techerrata.com/browse/twrp2/hlte
2. Get into download mode(vol down+home+power)
3. Link the downloaded .tar to pda in odin. Odin log should show 'added' once you connect phone to pc
4. Start the process. Once finish phone should boot into recovery automatically but it'll try to boot back into OS. Just hold vol up+home+power button to get back into recovery
Rosli59564 said:
Did you hold volume up+home+power button to get into recovery mode?
Click to expand...
Click to collapse
When I do that, I get an ultra short blue text appearing on the screen, before it goes into downloading mode, with a red text saying "Could not do normal boot." So it basically goes right into odin mode.
Thaelern said:
When I do that, I get an ultra short blue text appearing on the screen, before it goes into downloading mode, with a red text saying "Could not do normal boot." So it basically goes right into odin mode.
Click to expand...
Click to collapse
I edited my post. You need to reflash twrp
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Thaelern said:
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Click to expand...
Click to collapse
Yes if you know your previous twrp version than you can restore your old rom backup
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
Thaelern said:
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Click to expand...
Click to collapse
Right you need your previous twrp version to use the backup
Hehe you can actually press the thanks button
Rosli59564 said:
Yes if you know your previous twrp version than you can restore your old rom backup
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
Right you need your previous twrp version to use the backup
Hehe you can actually press the thanks button
Click to expand...
Click to collapse
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Thaelern said:
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Click to expand...
Click to collapse
Yes you can flash any cm based rom.
You can also flash any stock rom such as SweetRom/X-Note/BobCat as most developers still keeping 4.3 rom in their thread.
Thaelern said:
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Click to expand...
Click to collapse
Try this link: http://download.cyanogenmod.org/?device=hlte
Sent from my toaster
blackknightavalon said:
Try this link: [
Sent from my toaster
Click to expand...
Click to collapse
Will that work on the international version of the Note 3 ? I'm starting to believe that's the whole culprint of why I can't get it to work. :/
Thaelern said:
Will that work on the international version of the Note 3 ? I'm starting to believe that's the whole culprint of why I can't get it to work. :/
Click to expand...
Click to collapse
Believe so. It's because of updater script i guess as described in the link
http://forum.xda-developers.com/showthread.php?t=2600648&page=2
Try flashing chenglu's 6.0.4.5 recovery.
http://forum.xda-developers.com/showthread.php?t=2454079
Just the same as you did for twrp. I think i read somewhere that changing recovery helped some people.
The worst just download sweetrom/x-note/bobcatrom or any stock 4.3 based rom if you deperately need the phone to boot up
Rosli59564 said:
Believe so. It's because of updater script i guess as described in the link
Try flashing chenglu's 6.0.4.5 recovery.
Just the same as you did for twrp. I think i read somewhere that changing recovery helped some people.
The worst just download sweetrom/x-note/bobcatrom or any stock 4.3 based rom if you deperately need the phone to boot up
Click to expand...
Click to collapse
So after having spent the better half of the night, I actually managed to get my phone to boot into cyanogenmod 11 ! But that joy was shortlived when I came to realize that wi-fi wasn't working, and I couldn't get it to work. I tried to factory reset as I had read would help, but alas it did no good. I figured I should try and run back a stock 4.4.2 rom and just be done with it, but that was when I realized I had lost my root (?!) so that wasn't really a possibility either, next I set out to try and find a way to root my phone now running cyanogenmod 11. I found a file here on XDA called "CF-Auto-Root-hlte-hltexx-smn9005.tar" but whenever I try and flash that onto my phone, my phone just stays stuck saying "trying to enter into recovery mode" and does not really go anywhere from there. I can get back into recovery mode if I flash "n9005-cwm-recovery-6.0.4.5(1116)" onto the phone, like you said, but that still leaves me without root access, which I need to throw a rom onto my device?! Arrrgh, this is getting silly, I just wish I could go back to my backup/ default rom on the device, but I can't.
Thaelern said:
So after having spent the better half of the night, I actually managed to get my phone to boot into cyanogenmod 11 ! But that joy was shortlived when I came to realize that wi-fi wasn't working, and I couldn't get it to work. I tried to factory reset as I had read would help, but alas it did no good. I figured I should try and run back a stock 4.4.2 rom and just be done with it, but that was when I realized I had lost my root (?!) so that wasn't really a possibility either, next I set out to try and find a way to root my phone now running cyanogenmod 11. I found a file here on XDA called "CF-Auto-Root-hlte-hltexx-smn9005.tar" but whenever I try and flash that onto my phone, my phone just stays stuck saying "trying to enter into recovery mode" and does not really go anywhere from there. I can get back into recovery mode if I flash "n9005-cwm-recovery-6.0.4.5(1116)" onto the phone, like you said, but that still leaves me without root access, which I need to throw a rom onto my device?! Arrrgh, this is getting silly, I just wish I could go back to my backup/ default rom on the device, but I can't.
Click to expand...
Click to collapse
About the cf auto root make sure you flash the one for 4.3. I believe you flashed the one for 4.4.2.
Doesn't really matter whether you have root access or not as long as you can boot into custom recovery. Just flash any custom rom. It'll give you root anyway.
Still if you need root just make sure you flash cf auto root then flash twrp or chenglu recovery. Flash the one for 4.3 that's the most important
Rosli59564 said:
About the cf auto root make sure you flash the one for 4.3. I believe you flashed the one for 4.4.2.
Doesn't really matter whether you have root access or not as long as you can boot into custom recovery. Just flash any custom rom. It'll give you root anyway.
Still if you need root just make sure you flash cf auto root then flash twrp or chenglu recovery. Flash the one for 4.3 that's the most important
Click to expand...
Click to collapse
But when I have cyanogenmod 11 installed, is that then not 4.4.2 ? I suppose that's what's giving me trouble... I'll try and see if I can find the cf auto root for 4.3 and return back if I was successful or not. Again, thank you for being so patient..
-Edit
This seems to be the only one I can find; http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And I've already tried that one 3 times, but every time I flash it, the phone reboots and keeps trying to enter into recovery mode, and is unable to do so before I've flashed n9005-cwm-recovery-6.0.4.5(1116) again
this is what it says;
"recovery booting...
Recovery is not seandroid enforcing
Set warranty bit : Recovery "
Thaelern said:
But when I have cyanogenmod 11 installed, is that then not 4.4.2 ? I suppose that's what's giving me trouble... I'll try and see if I can find the cf auto root for 4.3 and return back if I was successful or not. Again, thank you for being so patient..
-Edit
This seems to be the only one I can find; http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And I've already tried that one 3 times, but every time I flash it, the phone reboots and keeps trying to enter into recovery mode, and is unable to do so before I've flashed n9005-cwm-recovery-6.0.4.5(1116) again
this is what it says;
"recovery booting...
Recovery is not seandroid enforcing
Set warranty bit : Recovery "
Click to expand...
Click to collapse
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
Rosli59564 said:
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
Click to expand...
Click to collapse
Just enter download mode and reflash twtp. I saw there are 4 different versions for 4.3(2.6.3.0/2 6.3.5/2.6.3.6/2.3.6.7). Flash 1 by 1 and see if it can restore your backup
Rosli59564 said:
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
Just enter download mode and reflash twtp. I saw there are 4 different versions for 4.3(2.6.3.0/2 6.3.5/2.6.3.6/2.3.6.7). Flash 1 by 1 and see if it can restore your backup
Click to expand...
Click to collapse
You really are a boss with a heart of gold! I used the file you linked me, ran it, and sure enough it installed and gave me root access. Believe it or not, but I am learning from this! The whole thing about bootloader being different from the rom version was new to me. But I am up and running with root access now, so now I hope it shouldn't be too hard to get a stock rom thrown in. I've kinda given up on my backup. I no longer care for the files I had before, now I just want the phone up and running with wifi.. X_ X
- Edit
Or do you have any clue as to what is causing wifi to not work? I really don't mind the rom at all, I quite like it, but where I live wifi is mandatory as it's a lowered area with mountains around me, meaning LTE really isn't viable while at home.
Thaelern said:
You really are a boss with a heart of gold! I used the file you linked me, ran it, and sure enough it installed and gave me root access. Believe it or not, but I am learning from this! The whole thing about bootloader being different from the rom version was new to me. But I am up and running with root access now, so now I hope it shouldn't be too hard to get a stock rom thrown in. I've kinda given up on my backup. I no longer care for the files I had before, now I just want the phone up and running with wifi.. X_ X
- Edit
Or do you have any clue as to what is causing wifi to not work? I really don't mind the rom at all, I quite like it, but where I live wifi is mandatory as it's a lowered area with mountains around me, meaning LTE really isn't viable while at home.
Click to expand...
Click to collapse
Not sure about the wifi problem but yes you're good to go with a new rom. Make sure to choose only for 4.3 bootloader else you will run into problem later
Rosli59564 said:
Not sure about the wifi problem but yes you're good to go with a new rom. Make sure to choose only for 4.3 bootloader else you will run into problem later
Click to expand...
Click to collapse
Could you be so kind and to link me to a rom that works for 4.3 bootloader? I am so paranoid I'll end up picking something for 4.4.2, like I was about to do now. :S
Thaelern said:
Could you be so kind and to link me to a rom that works for 4.3 bootloader? I am so paranoid I'll end up picking something for 4.4.2, like I was about to do now. :S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2495688
Post 1 choose V6
Or
http://forum.xda-developers.com/showthread.php?t=2472301
Post 3
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 1 v3.0
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 2 V5
There's a lot more in developement section. Just take a look there. Most developers still providing link for 4.3
Rosli59564 said:
http://forum.xda-developers.com/showthread.php?t=2495688
Post 1 choose V6
Or
http://forum.xda-developers.com/showthread.php?t=2472301
Post 3
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 1 v3.0
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 2 V5
There's a lot more in developement section. Just take a look there. Most developers still providing link for 4.3
Click to expand...
Click to collapse
Alright.. Time to get things done right! So just being sure I do it alright. I pick this one; http://forum.xda-developers.com/show....php?t=2498687
Download the one for 4.3 bootloader, once download I place the zip folder on my SD card
- Then boot into Recovery mode, wipe phone clean, and then install the rom directly from inside of Recovery mode?
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
I'm trying to root my edge but I can't get these files from the links. do you still have this?
Mikekan13 said:
I'm trying to root my edge but I can't get these files from the links. do you still have this?
Click to expand...
Click to collapse
yes i have it
I dream with the day that my Verizon Note Edge will get root...
This method to get root also works for the KDDI AU SCL24 Note Edge! I found the file on a vietnamese website that said it also worked for SCL24 / SM-N915J.
Confirmed working as well.
root files for edge
pg2150 said:
yes i have it
[email protected]
send me exactly you need
Click to expand...
Click to collapse
hi sir..may i ask for the files as well for Note Edge rooting..the files in the links have been deleted
kindly email it to [email protected] if it's ok..thanks
pg2150 said:
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
Click to expand...
Click to collapse
Do you mind making the files available to me as well? I need:
TWRP RECOVERY :
openrecovery-twrp-2.8.1.1-trltetmo.img.tar?dl=0
FIRmWARE :
SC01GOMU1ANJ3.zip.
Thanks.
---------- Post added at 07:28 AM ---------- Previous post was at 06:50 AM ----------
ihavenoeffort said:
This method to get root also works for the KDDI AU SCL24 Note Edge! I found the file on a vietnamese website that said it also worked for SCL24 / SM-N915J.
Confirmed working as well.
Click to expand...
Click to collapse
IHNE, can you send me that link to the site you found the files? [email protected]. Thanks.
Working Link for firmware SC-01G ?
pg2150 said:
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
Click to expand...
Click to collapse
Sorry, but could I bother you to send the linked files to [email protected]?
I would really appreciate it! Thanks for your time!
P.s. Just to clarify, this will also work for the SCL24, correct?
kokuon said:
P.s. Just to clarify, this will also work for the SCL24, correct?
Click to expand...
Click to collapse
The root method does work. I'm not sure about the recovery part though.
**edit**
I went to this website and downloaded TWRP version 2.8.5.0 and it works. As for the functionality, i'm not sure. I tried doing the backup and it was working but then the screen shut off but the back and home buttons were still lit up and the screen would not turn back on with the power button so i just pulled the battery. Also of note, there are two strips of bright blue on either side of the main UI. There was an error that said the UI could not load properly, but like i said, it was starting to backup. I'm more of a CWM kind of person so i am going to try the T-Mobile version of that and see what happens. http://techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.5.0-trltetmo.img.tar
Good luck.
**edit2**
I turned off the screen timeout feature and the backup went fine. I'm going to test to see if I can restore from that backup tonight.
ihavenoeffort said:
The root method does work. I'm not sure about the recovery part though.
**edit**
I went to this website and downloaded TWRP version 2.8.5.0 and it works. As for the functionality, i'm not sure. I tried doing the backup and it was working but then the screen shut off but the back and home buttons were still lit up and the screen would not turn back on with the power button so i just pulled the battery. Also of note, there are two strips of bright blue on either side of the main UI. There was an error that said the UI could not load properly, but like i said, it was starting to backup. I'm more of a CWM kind of person so i am going to try the T-Mobile version of that and see what happens.
Good luck.
**edit2**
I turned off the screen timeout feature and the backup went fine. I'm going to test to see if I can restore from that backup tonight.
Click to expand...
Click to collapse
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
custy3000 said:
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
Click to expand...
Click to collapse
Whoa wait. First you need to follow the root method by flashing the sc-01g recovery. Boot the phone and install/update busy box and SuperSU. Then you can reflash to twrp or cwm.
custy3000 said:
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
Click to expand...
Click to collapse
ihavenoeffort said:
Whoa wait. First you need to follow the root method by flashing the sc-01g recovery. Boot the phone and install/update busy box and SuperSU. Then you can reflash to twrp or cwm.
Click to expand...
Click to collapse
Ah, ok I understand now. Thanks for the help!
Now if only somebody could provide me with SC01GOMU1ANJ3.zip... I'll love you long time!
custy3000 said:
Ah, ok I understand now. Thanks for the help!
Click to expand...
Click to collapse
I got it, thanks a lot!
Just remember that if you want osaifu-keitai to keep working, you will need to flash Stock Recovery.
golfinry said:
Just remember that if you want osaifu-keitai to keep working, you will need to flash Stock Recovery.
Click to expand...
Click to collapse
Do you have a link to the stock recovery to flash?
HyoImowano said:
Do you have a link to the stock recovery to flash?
Click to expand...
Click to collapse
Please see updated guide.
Thank you!
when i get into Recovery Mode it allways error "recovery seandroid enforcing".how can i fix it?:crying:
I am using the Note 4 N910G variant. I have rooted using CF Autoroot(5.0.1) and flashed CWM Recovery. I have also tried TWRP.
For some reason, I can't boot into Emotion Revolution ROM and most of the other ROMs would give me errors such as can't open file during installation.
I am seeing messages such as Recovery is not Seandroid enforcing and set warranty bit: kernel.
I have rooted and flashed ROMs before without a hitch many times. This is the first time I am coming across such problems. Forgive me for my ignorance I'll try my best to provide any extra information that is required to fix this issue.
Help would be greatly appreciated
Erm..anyone? I desperately need help fixing this!
BickWhale said:
Erm..anyone? I desperately need help fixing this!
Click to expand...
Click to collapse
Hi mate!
Can you please explain what have you done just before the problem started and what is happening now when you turn on the phone?
Can you boot into recovery?
_mone said:
Hi mate!
Can you please explain what have you done just before the problem started and what is happening now when you turn on the phone?
Can you boot into recovery?
Click to expand...
Click to collapse
Thanks for the response by the way. Much appreciated I used CF AutoRoot and rooted my phone with Odin V3.07. Pretty much followed the steps here
http://galaxynote4root.com/galaxy-note-4-root/how-to-root-galaxy-note-4/
My phone worked just fine after the root. I went on to flash a custom recovery. (TWRP) and it went without a hitch. After which, I wiped my phone and flashed a custom ROM (Without backing up which was foolish, I know..)
http://www.emo-troid.com/tw-rom-downloads.html
Now, everytime I try to boot my phone, I would just get stuck in a bootloop. I can boot into recovery and download mode just fine for now.
Did you flash (via odin) the right modem and bootloader for the rom that you want to use?
---------- Post added at 03:36 PM ---------- Previous post was at 03:23 PM ----------
Download and extract this: N910GDTU1BOF1_Bootloader_Modem.tar.zip than flash the .tar.md5 file via odin.
_mone said:
Did you flash (via odin) the right modem and bootloader for the rom that you want to use?
---------- Post added at 03:36 PM ---------- Previous post was at 03:23 PM ----------
Download and extract this: N910GDTU1BOF1_Bootloader_Modem.tar.zip than flash the .tar.md5 file via odin.
Click to expand...
Click to collapse
Alright, I've flashed it. What now?
Now you should be able to boot into the rom..
_mone said:
Now you should be able to boot into the rom..
Click to expand...
Click to collapse
Still stuck in a bootloop with a yellow text at the top left corner saying set warranty unit: kernel. I've just flashed the same ROM I have linked earlier...
BickWhale said:
Still stuck in a bootloop with a yellow text at the top left corner saying set warranty unit: kernel. I've just flashed the same ROM I have linked earlier...
Click to expand...
Click to collapse
It doesn't show even the samsung boot animation?
_mone said:
It doesn't show even the samsung boot animation?
Click to expand...
Click to collapse
Oh it does, it shows me the Samsung Galaxy Note 4 Powered by Android text along with that tiny yellow text in the top left. It would constantly reboot into that screen, doesn't go beyond that.
BickWhale said:
Oh it does, it shows me the Samsung Galaxy Note 4 Powered by Android text along with that tiny yellow text in the top left. It would constantly reboot into that screen, doesn't go beyond that.
Click to expand...
Click to collapse
Did you wipe data/cache/dalvik/system before flashing the ROM?
If not, please try it. If yes and still bootloop try to download and flash a different ROM like this one.
Let us know.
_mone said:
Did you wipe data/cache/dalvik/system before flashing the ROM?
If not, please try it. If yes and still bootloop try to download and flash a different ROM like this one.
Let us know.
Click to expand...
Click to collapse
Alright. Apparently I can't use adb push for my CWM recovery. Any other way?
Edit: I have resolved the matter with the ABD push., had to simply replug my phone.
My phone booted up but is still in the Samsung animation. It got pass the Powered by Android galaxy Note 4 screen at least.
MY PHONE ****ING BOOTED INTO ANDROID. Thank you so much dude You have helped a stranger across the planet save 800 dollars, you're amazing
I'm happy that you fixed the problems with your note 4!
Enjoy your "reborn" phone!
Hi All,
I'm basically starting this thread as i have not seen many users of this tablet and my main purposes are:
1) to look for users of the same tablet so we can pool our knowledge together as we go along this somewhat new and rare device
2) i would like to root the device and i haven't seen anyone post any guides yet for this device. FYI, i have already updated to Nougat 7.0 o the device. So far, all the guides i've seen are for Marshmallow.
i hope i can get some members to reply to my thread and, hopefully, have a running thread here in XDA... hoping that in the future we could get someone to develop a new ROM when Samsung decides to stop send OTA updates.
+1 here!
I've seen people already rooting it, but as I google for its root method, there are websites I just can't trust or see the positive results, or a few posts with "thanks, it worked".
If at least they could share to us where did they got the instructions for rooting...
---------- Post added at 09:24 PM ---------- Previous post was at 09:18 PM ----------
Hmmm xda have posted how to root it.
A few paragraphs further on the first post of this topic there's a procedure for rooting.
https://forum.xda-developers.com/galaxy-tab-a/development/recovery-official-twrp-galaxy-tab-10-1-t3473023
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
And here goes another one
https://forum.xda-developers.com/galaxy-tab-a/how-to/newbie-friendly-twrp-root-tab-tablets-t3552509
Love my tablet but seems not to be popular on here [emoji17][emoji17]
Sent from my [device_name] using XDA-Developers Legacy app
Love mine to but seems to be not the favorite mostly the non spen versions get all the love
Sent from my SM-P580 using Tapatalk
it also work sm-p585?
it also work sm-p585? ← this device also glaxy tab a 10.1
Blank screen in Recovery Mode while trying to root SM-P585Y
I'm a little disheartened to see so few subscribers to this thread but here goes:
I'm trying to root my SM-P585Y using Odin and flashing TWRP recovery. Everything's fine until the step where I have to boot from Download Mode into Recovery Mode. Instead of going into the normal recovery screen, my screen just goes blank occasionally displaying a few random lines or vibrating when I push random buttons trying to get some sort of response. I can get it back into Download Mode by pressing "Volume Down + Power + Home" but that's about it. I've essentially lost Recovery Mode, and a regular reboot from Download Mode by pressing Volume Down just takes me back to the blank screen with random lines.
Any ideas on what to do?
wrawlind said:
I'm a little disheartened to see so few subscribers to this thread but here goes:
I'm trying to root my SM-P585Y using Odin and flashing TWRP recovery. Everything's fine until the step where I have to boot from Download Mode into Recovery Mode. Instead of going into the normal recovery screen, my screen just goes blank occasionally displaying a few random lines or vibrating when I push random buttons trying to get some sort of response. I can get it back into Download Mode by pressing "Volume Down + Power + Home" but that's about it. I've essentially lost Recovery Mode, and a regular reboot from Download Mode by pressing Volume Down just takes me back to the blank screen with random lines.
Any ideas on what to do?
Click to expand...
Click to collapse
The TWRP device tree of P585Y is from MM. If your tablet is android 8.1, it'll cause error. Just flash stock rom or stock recovery to fix it. If you want to root, just use magisk.
Tung Lam said:
The TWRP device tree of P585Y is from MM. If your tablet is android 8.1, it'll cause error. Just flash stock rom or stock recovery to fix it. If you want to root, just use magisk.
Click to expand...
Click to collapse
How can root my p585 with magisk?
Arian137 said:
How can root my p585 with magisk?
Click to expand...
Click to collapse
Extract boot.img from stock rom file. Just use Magisk manager app to patch the boot.img. Then rename generated file to boot.img and compress it to tar file. Finally flash the file with odin in AP.
[/COLOR]
Tung Lam said:
Extract boot.img from stock rom file. Just use Magisk manager app to patch the boot.img. Then rename generated file to boot.img and compress it to tar file. Finally flash the file with odin in AP.
Click to expand...
Click to collapse
Thank you so much. Is this work for oreo stock rom?
---------- Post added at 06:26 PM ---------- Previous post was at 06:22 PM ----------
And is there any safe way to install twrp on p585 oreo?
Arian137 said:
[/COLOR]
Thank you so much. Is this work for oreo stock rom?
---------- Post added at 06:26 PM ---------- Previous post was at 06:22 PM ----------
And is there any safe way to install twrp on p585 oreo?
Click to expand...
Click to collapse
This method works with oreo stock rom.
If you want twrp, downgrade to android 6.0
Hi everyone
If i rooted my device (P585), with this method that patch boot.img with magisk, i'll use adoptable storage or only in twrp mode?
Sorry for my question, but i'm confused.
I have a Samsung Galaxy Tab A6 with S Pen ... but on the tab I can't install the app, also not factory reset
anyone have a solution?
thank you
Has anyone found a 64bit rom for this device? I really want to use it to fly my mini 2 and Air 2...
i
Tung Lam said:
The TWRP device tree of P585Y is from MM. If your tablet is android 8.1, it'll cause error. Just flash stock rom or stock recovery to fix it. If you want to root, just use magisk
Click to expand...
Click to collapse
Hi guys.
I'm trying to update the android from the P585.
I already tried to install the T585/T580 ROMs, but it doesn't work.
I think it's because of the model, because it has a slightly different name ( gtaxllte Vs gtanotexllte )
Information about P585.
Device Name: gtanotextllte
Device: Model SM-P585M
Device CPU: arm64-v8a,armeabi-v7a,armeabi
I looked a lot on the internet for a ROM for the P585, but I couldn't find it.
Does anyone here already found ROM for P585?
Marlon_Correa said:
Hi guys.
I'm trying to update the android from the P585.
I already tried to install the T585/T580 ROMs, but it doesn't work.
I think it's because of the model, because it has a slightly different name ( gtaxllte Vs gtanotexllte )
Information about P585.
Device Name: gtanotextllte
Device: Model SM-P585M
Device CPU: arm64-v8a,armeabi-v7a,armeabi
I looked a lot on the internet for a ROM for the P585, but I couldn't find it.
Does anyone here already found ROM for P585?
Click to expand...
Click to collapse
Still looking for any ROM as well...
Hey guys, may i ask? Is there a custom rom for samsung [SM-P585Y]?
How do you shut down a P585 using the physical keys?
I searched the web and got results for using the soft button and bixby.
I want to shutdown using the keys because I can't access the soft button.