Whenever my N6P connects to my Parrot CK3100 carkit, the carkit keeps asking for access to my contacts. I allow it every time (not really convenient when driving), but there doesn't seem to be a setting that makes it remember my choice. Furthermore the voice tags that I have stored in the CK3100 are wiped once in a while randomly. I think the two issues have something to do with each other.
Does anyone know how I can grant my CK3100 access to my contacts permanently and how my voice tags (stored on the CK3100) can be saved permanently?
I had the same CK3100 when I had my previous phone: a Nexus 5 (Android 4.4.4) and I didn't have any problems. Both the N5 and N6P (Android 6.0.1) are rooted with Xposed installed.
Thanks for your suggestions.
Related
Hi to all.
Have any of You experience with connecting TyTN to more sophisticated bt carkit. Mine connects perfectly to my simple motorola carkit but does not want to connect to Parrot 3100 at all.
Hi varden,
There are some issues with tytn an parrot CK connection. As it is discussed on this thread, Parrot is aware of the problem and say they are waiting for a tytn unit to test it and solve the problems.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
Regards.
Do You know of any other working carkit with an LCD and contacts importing?
My Audi BT carkit doesn't work with the TyTN,
It connects and stays connected for about 5 minutes, then it randomly disconnects and reconnects and sometimes just disables the BT on the TyTN :evil:
I have no troubles using my Lexus car kit for making calls, but I cannot for the life of me figure out how to transfer contacts from the TyTN to the car address book
Just tried my Orange SPV M3100 with my Audi A4 BT carkit, and it all appears to work fine so far.
To the Lexus guy, most in built car kits I have come accross have the ability to read the contacts off the SIM card. As this is a standard format, car manufactureres don't have to worry about accessing contacts from Symbian, Windows Mobile, Nokia etc etc etc. With my Audi, the first time it connects via Bluetooth, it reads all the contacts from the SIM card. (Note: if you already have a Bluetooth connection created, you will have to delete it and then re-create it to initiate the SIM download bit).
This maybe different on your Lexus, but the mechanism should be explained in your manuals somewhere. If not, Lexus dealers are reknowed for being very helpful, why not try them!
Markee
CK 3000?
Does anyone have any experience with the TyTN and the simpler CK 3000 kit?
I use my TyTN with a sony ericsson bluetooth car-kit. It works perfect at the moment. I didn't use it much yet, but it works very well. the TyTN connects much faster then my previous Eten M600
Does anybody have the Tytn work with a Lexus Bluetooth carkit?
If yes - is the phonebook transferred to the carkit?
Thank you
TyTN with Parrot RNB
Hello together,
I'm using the MDA Vario II together with a Parrot RNB. Paring, connecting and phone-book synchronising is working quite well. But I have problems with phoning. While synchronising I can't make a call. When I try I don't hear anything (no ring tone and no speech) and my MDA disconnects after some seconds.
After synchronising the phone handling is quite good. I can reach and make calls either with the RNB or with my MDA and the sound quality of my phone partner is very good. The big problem is, that my speech is muted every two seconds for about one second. So my partner has big problems to understand me.
On the RNB I have the latest firmware, which is about one year old and on my MDA I have the ROM Version: 1.21.111.3 and the Radio Version: 1.05.02.00
Does anyone have some hints for me to solve the problems?
Greetings Pudl
Phonebook transfer to Lexus now works
Finally managed to send contacts over to my LS430 from my Hermes (Cingular 8525).
How you ask?
WM6!
It has an updated bluetooth stack that now interoperates properly.
Finally.
@Mandingo,
How did you achieve this, i just picked up my RX350 and i already have WM6 on my Hermes, but i can only send 1 contact at a time to the car, and it's becoming painful, i wish there was some way i could select all contacts and then send via bluetooth?
if you go to http://www.jetwaremobile.com/ you can download their cab file, then install it and you can push all the contacts over in 1 go.
Paul
I have a BMW with bluetooth phone kit (official BMW!) and i couldn't use it with me Symbian phone... Now i have a TyTN and all works great
I stopped using sync on my TyTN with my CK3300. Instead I exported all my contacts from Outlook with the Parrot App, and pushed them over bluetooth to the kit.
You need to select the SonyEricsson K800 NO SYNC when pairing the TyTN so it doesn't sync. The advantages with this is that you can use the dual keyword (name then home/work/mobile) instead of the default sync that just puts all numbers in one long list.
Parrot CK3000
I am using a TyTn with a simply Parrot 3000. It works well. If you have a problem with it, reset the Parrot.
Is there any possible way to repair the BT annoying thing?
I've got a Parrto BT set in my car and the tytn disconnects all the time, when I achieve the connections I cannot transfer my contacts...
Thanks for your help
Hi,
Which model of Parrot car kit is it? I use the CK3100 (the one with the LCD) and it works except for the usual TyTN switching BT off when it disconnects from the Parrot after stopping the car. Sync works fine.
Might also be worth looking in the Parrot forums at http://www.driveblue.com/
Gav.
Parrot
I also have the 3100!!
When I get into the car it doesn't recognize me. I need to go to congiguration and establish the link, the it seems that it starts to sinchronize the agenda but it doesn't!!!
Hi again.
Is there any chance you have the power cables to the Parrot CK3100 the wrong way round? If that is the case then the Parrot CK3100 will forget the pairing to your phone and you will need to re-pair everytime. The easiest way to fix this is to reverse the wires at the fuse.
Basically there are 2 wires on the Parrot Parrot CK3100, one perminent to the battery for saving the memory and the other is the ignition. When the ignition goes to 12v then the Parrot CK3100 powers on and tries to connect to the phones in its pairing memory list (upto 5).
Do you know which firmware is on your Parrot CK3100? The latest is 4.15b > it's under the Advance menu.
Gav.
Don't think so
I don't think so because it worked perfectly well with my Blackberry!
Got my TyTN yesterday (had a Wizard) and so far it works just fine with my CK3100. Syncs nice and fast and connects within 10 seconds. I did install Jetware mobile extender to make the display a little better. Haven't experienced the TyTN turning BT off yet...
Hi Pablete,
Strange. I can only suggest re-pairing and updating the Parrot to the latest firmware rev.
Hi Scott,
What advantage does Jetware mobile extender give?
Gav.
Jetware changes the "network OK" to the real network name, adds signal and battery bars, adds the phone ringtone instead of the Parrot ringtone and several other cool features.
Edit: the URL... http://www.jetwaremobile.com/
problem BT and voice dial
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
re960088 said:
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
Click to expand...
Click to collapse
Not completely sure I understand the question? If you meant to ask if it is possible to do voice dialing in the carkit instead of the phone then head to the voice commands menu, and in the bottom you'll find an option to change where voice commands are processed; carkit or phone.
i meant when i push the parrot green button the application voice dialer switches on on my TYTN, but no beep can be heared tru the car speakers?
with the newest cyberon voice dialler i can not confirm or redial, even if used outside the car?
Any suggestions
Hi all,
I use a Bluetooth carkit with automatic phonebook sync (each time the phone connects) which takes quite long. The carkit cannot be used while syncing, so I was wondering... is there a way (perhaps with a tool) to completely disable the phonebook transfer by Bluetooth?
The first time the HD connected to the carkit, I was asked if I wanted to allow phonebook transfer. It doesn't matter when I say yes or no, the carkit just starts downloading.
Any help would be appreciated!
Thanks.
Hi!
My hands-free set in my car was working well with my old S4 mini with Android 4.4.4. Now I upgraded to S5 with android 6.0.1 and I have now the problem that the bluetooth connection is lost after random time. Is this problem known or are their any new bluetooth settings I can check?
Thx!
Same problem witch become a month after upgrading lolipop to marshmallow ! ??
Same problem here - any solution?
Hi guys, I am having the same problem - were you able to find any solution?
Here a detailed description:
I am using Galaxy S5 G900F, and ever since the MM Firmware upgrade to Android 6, I have been experiencing the most annoying problem, and I am not able to find any reference to it on the web – I have been googling it forever, but it seems no one besides me is seeking advice on it:
When connecting my Galaxy S5 to my car’s Hands-free Bluetooth and performing a Whatsapp Voice Call, the call initially runs over the car’s Bluetooth, but after about 30 seconds the call goes back to the phone’s speaker.
Nevertheless, Whatsapp continues to show the Bluetooth icon turned on, as if the conversation were still running over Bluetooth.
Pressing the Bluetooth icon in the Whatsapp call twice (disconnect and reconnect Bluetooth for the call) moves the call back to the car’s Bluetooth, but then again after about 30 seconds the call goes back to the phone’s speaker, still showing the Bluetooth icon as connected within the application.
A few important things to mention:
a. Regular voice calls are working perfectly over the car’s Bluetooth
b. This used to work before
c. I installed the Lineage 14 – Android 7 – ROM and it resolved the problem
I am looking for a solution for the MM ROM, as I am using the great SuperLite ROM.
Thanks!
Update @ 22-04-2017:
Somehow.... the Bluetooth issue just fixed itself.. I didn't change any settings.
It just started to function normally the next day!
It's still a mystery to me... but I'm glad it works fine now
______________________________________________________________________________
Hi,
I just got my S8 and I love it! Everything works well.. except:
When pairing the S8 via Bluetooth with my Parrot MK6100 carkit it won't sync the contacts from the phone to the carkit and when I play audio it streams it all scrambled.
The audio trough the carkit sounds like the phone is very far away and it's about to loose the connection. Actually the connection with the phone was dropped a few times while streaming audio. This only happend when I paired the phone the first time. The distance between both devices is about 30 centimeters...
Normal voice calls are ok.
The carkit has the latest firmware version 1.03a. I already did a reset to factory settings.
It works fine with other smartphones like my previous Sony Xperia Z3 and LG G4 running Android 6.0.1.
Samsung customer service was unable to help me with this issue. According to them, no other complains have been registered about Bluetooth issues with the S8 so far. At least in the Netherlands.
Streaming audio to other Bluetooth devices from the S8 does work fine.
Does anyone have any ideas on what the problem could be? Could it be Android 7.0.1 or maybe the S8 itself, as it features Bluetooth 5.0??
And of course, any ideas on how to fix it?
Thnx,
Lorand
hi! Same issues on my S8+. Bluetooth doesnt send notifications to smart watch, also doesn't auto connect to BMW. And cant find any solutions ..