Hi to all.
Have any of You experience with connecting TyTN to more sophisticated bt carkit. Mine connects perfectly to my simple motorola carkit but does not want to connect to Parrot 3100 at all.
Hi varden,
There are some issues with tytn an parrot CK connection. As it is discussed on this thread, Parrot is aware of the problem and say they are waiting for a tytn unit to test it and solve the problems.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
Regards.
Do You know of any other working carkit with an LCD and contacts importing?
My Audi BT carkit doesn't work with the TyTN,
It connects and stays connected for about 5 minutes, then it randomly disconnects and reconnects and sometimes just disables the BT on the TyTN :evil:
I have no troubles using my Lexus car kit for making calls, but I cannot for the life of me figure out how to transfer contacts from the TyTN to the car address book
Just tried my Orange SPV M3100 with my Audi A4 BT carkit, and it all appears to work fine so far.
To the Lexus guy, most in built car kits I have come accross have the ability to read the contacts off the SIM card. As this is a standard format, car manufactureres don't have to worry about accessing contacts from Symbian, Windows Mobile, Nokia etc etc etc. With my Audi, the first time it connects via Bluetooth, it reads all the contacts from the SIM card. (Note: if you already have a Bluetooth connection created, you will have to delete it and then re-create it to initiate the SIM download bit).
This maybe different on your Lexus, but the mechanism should be explained in your manuals somewhere. If not, Lexus dealers are reknowed for being very helpful, why not try them!
Markee
CK 3000?
Does anyone have any experience with the TyTN and the simpler CK 3000 kit?
I use my TyTN with a sony ericsson bluetooth car-kit. It works perfect at the moment. I didn't use it much yet, but it works very well. the TyTN connects much faster then my previous Eten M600
Does anybody have the Tytn work with a Lexus Bluetooth carkit?
If yes - is the phonebook transferred to the carkit?
Thank you
TyTN with Parrot RNB
Hello together,
I'm using the MDA Vario II together with a Parrot RNB. Paring, connecting and phone-book synchronising is working quite well. But I have problems with phoning. While synchronising I can't make a call. When I try I don't hear anything (no ring tone and no speech) and my MDA disconnects after some seconds.
After synchronising the phone handling is quite good. I can reach and make calls either with the RNB or with my MDA and the sound quality of my phone partner is very good. The big problem is, that my speech is muted every two seconds for about one second. So my partner has big problems to understand me.
On the RNB I have the latest firmware, which is about one year old and on my MDA I have the ROM Version: 1.21.111.3 and the Radio Version: 1.05.02.00
Does anyone have some hints for me to solve the problems?
Greetings Pudl
Phonebook transfer to Lexus now works
Finally managed to send contacts over to my LS430 from my Hermes (Cingular 8525).
How you ask?
WM6!
It has an updated bluetooth stack that now interoperates properly.
Finally.
@Mandingo,
How did you achieve this, i just picked up my RX350 and i already have WM6 on my Hermes, but i can only send 1 contact at a time to the car, and it's becoming painful, i wish there was some way i could select all contacts and then send via bluetooth?
if you go to http://www.jetwaremobile.com/ you can download their cab file, then install it and you can push all the contacts over in 1 go.
Paul
I have a BMW with bluetooth phone kit (official BMW!) and i couldn't use it with me Symbian phone... Now i have a TyTN and all works great
I stopped using sync on my TyTN with my CK3300. Instead I exported all my contacts from Outlook with the Parrot App, and pushed them over bluetooth to the kit.
You need to select the SonyEricsson K800 NO SYNC when pairing the TyTN so it doesn't sync. The advantages with this is that you can use the dual keyword (name then home/work/mobile) instead of the default sync that just puts all numbers in one long list.
Parrot CK3000
I am using a TyTn with a simply Parrot 3000. It works well. If you have a problem with it, reset the Parrot.
Related
I've got a Cardo Scala BT headset (thanks Expansys) which works perfectly with Wizard (and MS Voice Commander). Occasionally I'd like to use it with my work Nokia 6310i. Trouble is, I can't figure out how to manually disconnect the 9100 from the h/set. Can anyone help?
I'd like to fit a BT carkit, but expect the same issue switching phones there too...
Any 'stupid, it's easy, you just do...' gratefully received
Regards
Dox
I found to my dismay that my Prophet (Orange M600) is not fully compatible with my BMW 3 series (E46) bluetooth car kit. It will pair successfully, yet the phone book is not always transfered however the major problem is the outgoing audio is bearly understandable. I have no problems hearing the caller they just can't hear me.
My wife has an Orange C600 smartphone running WM5 and this operates perfectly.
Does anyone have their Prophet working with a BMW Car Kit or can offer any possible resolution?
Hi,
Mine Qtek S200 works perfectly with my BMW E46 bluetooth kit. They can hear me clearly and I hear them clearly. Phone book transfer works perfectly too.
Sorry, I can only say that it works and not how to solve your problem.
Maybe you have an older bluetooth kit? Mine BMW is an 330Ci from 2006.
My incoming and outgoing audio works perfectly fine, but have the same problem with the phonebook not always being transfered.
I'm using a Orange M600 flashed with Imate Jamin from. Had a Imate SP5m previously too and had the same results.
I never tried it with the Orange Rom as I flashed is as soon as I got it.
Hi,
I'm using the XDA Neo with my BMW X5 BT Kit. Audio works fine, so does the phonebook transfer. The SMS function does not work.
andilein
Mine works fine
Mine works fine audio & contacts syncro whit a 2005 BMW E90 5 series, best than whit the Qtek S110...
Hi everybody,
I completed some tests using my bluetooth car kit (Audi integrated BT MMI car kit). Here is what I saw :
With the original french ROM (1.18.256.2)
Outgoing calls
90% of the calls were interrupted during dialing or connection. The main problem was UMTS stability with the french mobile operator named SFR. After deactivating UMTS/3G and falling back to GSM, 80% of the calls were interrupted during the first minute of communication because of BT unstability.
Incoming calls
Impossible to take a call : half were immediatly interrupted, half were answered using the internal micro instead of the BT one.
With the JasJam ROM (1.20.305.3)
Outgoing calls
After deactivating UMTS/3G support all the calls are stable. Every thing is working fine and the Audi BT car kit works just fine !
Incoming calls
Still impossible to take a call : quite all are not well handled. BT is still unusable to take calls.
I don't think the BT car kit is the problem, because I am using it every day with a Qtek 8310 (Tornado) and both incoming and outgoing calls are well handled.
If you've got some experience, please share it. I am so disapointed that this marvelous TyTN cannot replace my Tornado, only because this "merdique" (<------ french romantic word ) bluetooth functionnality is not working ! :evil:
Arnaud.
Hi Arnaud,
I too have problems - see:
http://forum.xda-developers.com/viewtopic.php?t=61594
Paul
Im also having problems with carkit.
Jasjam and kjam just dont connect with my carkit (while they pair with it) but Jasjam and all nokia / samsung phones work perfectly well with it. Even Palm treo 650 works.
Is this a problem with iMate sets or with Windows Mobile 5.0?
I've had a friend who also has a TyTN which we tried in my kit and it didn't work. It seems that users with other variants (e.g. Orange) don't have this issue?
Further (non-technical) tests have shown that if you answer or make a call, you can get the audio by going into the call menu and choosing "Turn handsfree off". My uneducated guess here is that there is some issue with the headset feature on the TyTN and by doing this, it resets the headset profile and bingo!
It is a pain in the ar$e doing this for inbound calls, but for outbound it is manageable - you simply dial the number and whilst it is connecting, do the menu->Turn handsfree off workaround. Hopefully the new ROM will fix it - when it arrives!!
Hi All,
Just to put in my experience.
I have an Audi A4 with a Gen II car kit. As there is no handset holder for the TyTn I am using the Bluetooth function.
I have the Orange SPV M3100 variant, which works absolutley fine with the Audi Bluetooth, with one problem....
As I don't yet have a car charger, when the phone goes into sleep mode, it appears to disable bluetooh (I occasionally get a 'BT OFF' signal on the car display). Switching off bluetooth, then switching on again on the phone tends to kick it back into life where it stays live for another ten minutes or so until the phone dozes off again..
I have heard of a few people who have also diagnosed the problem as possbily the phone going to sleep to conserve battery, and solved the problem with an in car charger. I will report back when I have a charger.
Again, I do not suspect the Audi car kit as I have previoulsy used this (on Bluetooth) with a Nokia 6230 and MDA Vario, with no problems at all (the Vario was externally powered from the car).
Maybe you TyTn owners can flash to the Orange ROM ;-)
Same Scenario Different Cast
I have a Lexus GS with BT.... here's my Undesired results
actually, the only Problem i am having is very annoying.
If i receive or make a call after i pair with the Car kit, EVERY Thing is fine,
The sound quality is good, the response time is good (no Delay).
BUT after that call is ended, the BT itself on the jasjam TURNS off...
so i have to turn the BT on After EVERY Single Call (either made or received)
Is this Normal, I don't think so, but i had to ask
I have the Original Ship ROM Arabic version
My BMW handsfree works just fine with my TyTN. No issues other than an occasional BT off (loss of pairing). Interestingly, it's not sleep mode related since it usually works just fine in that mode. Generally, disabling Bt then re-enabling it re-establishes the connection then all is well. I have no issues making or receiving calls.
No doubt CarKit issues will be addressed when HTC releases their ROM update. Recent information tells me that this update is pretty much guaranteed to be an AKU3.0 variant. There's a tremendous amount of BT stack improvements in this AKU that should improve this as well as A2DP bluetooth issues.
.. No issues other than an occasional BT off (loss of pairing). ..
Interesting! I have the same issue with MTeoR.. I wonder if MteoR and TyTn are based on the same HTC device PLATFORM.
Updated my Parrot CK3100 to the newest version and things still don't work too well. When I start a call on the Parrot it takes around 20 seconds to start dialing on the phone, and when I receive a call I have to pick it up, place it on hold, and retrieve from hold to be able to hear the other side.
I wonder what/why they changed in the Bluetooth stack, it worked perfectly on my Wizard...
Renault Laguna II integrated BT kit
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
rmorby said:
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
Click to expand...
Click to collapse
Try installing Jetware mobile extender, that adds signal and battery bars as well as network name.
I enabled Remote SIM Acces in the Bluetooth Menu and now my contacts sync on my Audi Bluetooth Car kit with WM 6.1.
ive searched for ck-7w in the hermes section but finds nothing? surely others must use this handsfree kit?
Well my issues, my hermes wont find it when searching for bluetooth devises? Never had any issues with my wizzard?
ive tryed a few different wm6 roms, now on the black.
Is there a cab somewhere to fix this, as i cant, use this phone until i get it sorted with my car kit
Hi fil,
I can't speak to WM6 but my 7W works well (usually) with my 8525 WM5 ATT Upgrade Rom. I remapped the ptt button to activate the built-in voice dialing. Sometimes the system announces the name throught the 7w speaker, other time via the 8525 speaker. Who knows why?
The quality of the recognition software is fair. I am planning on re-recording some of the voice tags in the car via the 7w mic. I have a feeling this will result in greater accuracy. It has to do the the acoustics where the tags are recorded.
My BT settings in the 8525 are
Mode = Turn on BT and Make device visable
Devices = add new device, if it finds it, click on Nokia CK-7w & check off Hands Free, at the bottom of the screen hit Save
BTW, the 7w data cable 5 volt lead does not have enough balls to charge the 8525.
Let me know if you get WM6 working with the 7w.
Lyle
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
alylea, my tytn wont even find it, when searching, have ticked the make seeable to othe devices, the method you discribe works perfectly as said on my wizard
davw, reset the ck-7w how?
tho the ck-7w can do up to 7 phones in its memory i belive, had no issues with a wizard and 2 different nokia all paired on it allready?
davw said:
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
Click to expand...
Click to collapse
again how'd you reset it? dont have the manual
still aint working, see unable to see the kit!???
anyone?
right its working now?, done nothing different?
was sitting in my car thismorning doing a bluetooth search for my new stereo headset i picked up from the PO on my way to work, it found it and the carkit , and paired with both!
well problem solved, but **** knows how ???
No idea what did the trick but here is the Nokia Europe site for the manual.
http://www.nokia.co.uk/A4222096
So iGuidance voice instructions do not come out of the CK-7W speaker not do the voice dialing confirmation names, although basic HF function works. I'm testing an inexpensive application that routes all audio from the 8525 to the BT output. I'll let you know if it works.
Hello all,
Does anyone have a recommended bluetooth car kit which they have successfully used with the Magic? I'm talking about any of the "newer" generation of car kits, which sychronise your contacts on the car kit display...
Anyone?
I've got Parrot CK3000 Evolution and it does work with Magic, however, there are two problems with it:
1. Sometimes (more often than not) the phone is connecting to Parrot after 4-5 minutes, even if it is the only phone registered with the kit.
2. It is not possible to transfer phonebook to the kit, and even if I transfer it from laptop, then the kit still refuses to do voice dialing (built-in one, not on HTC).
Contact synchronysing works fine on my Peugeot 207, which has the parrot CK 4100 device.
But I have another problem, the sound isn't transfered to the car speaker despite the fact that all wheel-on-command are working....
any ideas...
I've got the same malfunctions with my CK4100 and my HTC Cruise. I'm testing with my Rhodium.
I've read about updating the BT CarKit (KC 20/KC21, sogt 4.8->5.1) to fix it...
Have you any new about that?