Is there a way to setup a profile for my phone. I like to profile's: 1 in car, 2 outside car.
If my profile is "in car" and when i pickup the phone, he must switch automaticly to handsfree (speaker on).
yes
I have been looking for an answer on this too
On my Himalaya, my BT carkit does exactly that. It's paired as a Headset and thus autom. diverts the calls to it whan there is a connection (BT on and Carkit on)
I believe if you use the BT to answer the call it will route to the BT. If you use the phone to answer, it will use the handset.
I have the pioneer BT70 radio with intergrated BT carkit. Couldn't get it to auto connect (nokia does). Installed PocketZen and set the Car profile to autoconnect headset on incomming or outgoing call. It works about 90% of the time.
Like the PocketZen. But use it only as a way to turn on and of my BT to save power and to have the different profiles. Configuring the programm (saving settings) is f***ing slow! Switching is fast
Hi to all.
Have any of You experience with connecting TyTN to more sophisticated bt carkit. Mine connects perfectly to my simple motorola carkit but does not want to connect to Parrot 3100 at all.
Hi varden,
There are some issues with tytn an parrot CK connection. As it is discussed on this thread, Parrot is aware of the problem and say they are waiting for a tytn unit to test it and solve the problems.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
Regards.
Do You know of any other working carkit with an LCD and contacts importing?
My Audi BT carkit doesn't work with the TyTN,
It connects and stays connected for about 5 minutes, then it randomly disconnects and reconnects and sometimes just disables the BT on the TyTN :evil:
I have no troubles using my Lexus car kit for making calls, but I cannot for the life of me figure out how to transfer contacts from the TyTN to the car address book
Just tried my Orange SPV M3100 with my Audi A4 BT carkit, and it all appears to work fine so far.
To the Lexus guy, most in built car kits I have come accross have the ability to read the contacts off the SIM card. As this is a standard format, car manufactureres don't have to worry about accessing contacts from Symbian, Windows Mobile, Nokia etc etc etc. With my Audi, the first time it connects via Bluetooth, it reads all the contacts from the SIM card. (Note: if you already have a Bluetooth connection created, you will have to delete it and then re-create it to initiate the SIM download bit).
This maybe different on your Lexus, but the mechanism should be explained in your manuals somewhere. If not, Lexus dealers are reknowed for being very helpful, why not try them!
Markee
CK 3000?
Does anyone have any experience with the TyTN and the simpler CK 3000 kit?
I use my TyTN with a sony ericsson bluetooth car-kit. It works perfect at the moment. I didn't use it much yet, but it works very well. the TyTN connects much faster then my previous Eten M600
Does anybody have the Tytn work with a Lexus Bluetooth carkit?
If yes - is the phonebook transferred to the carkit?
Thank you
TyTN with Parrot RNB
Hello together,
I'm using the MDA Vario II together with a Parrot RNB. Paring, connecting and phone-book synchronising is working quite well. But I have problems with phoning. While synchronising I can't make a call. When I try I don't hear anything (no ring tone and no speech) and my MDA disconnects after some seconds.
After synchronising the phone handling is quite good. I can reach and make calls either with the RNB or with my MDA and the sound quality of my phone partner is very good. The big problem is, that my speech is muted every two seconds for about one second. So my partner has big problems to understand me.
On the RNB I have the latest firmware, which is about one year old and on my MDA I have the ROM Version: 1.21.111.3 and the Radio Version: 1.05.02.00
Does anyone have some hints for me to solve the problems?
Greetings Pudl
Phonebook transfer to Lexus now works
Finally managed to send contacts over to my LS430 from my Hermes (Cingular 8525).
How you ask?
WM6!
It has an updated bluetooth stack that now interoperates properly.
Finally.
@Mandingo,
How did you achieve this, i just picked up my RX350 and i already have WM6 on my Hermes, but i can only send 1 contact at a time to the car, and it's becoming painful, i wish there was some way i could select all contacts and then send via bluetooth?
if you go to http://www.jetwaremobile.com/ you can download their cab file, then install it and you can push all the contacts over in 1 go.
Paul
I have a BMW with bluetooth phone kit (official BMW!) and i couldn't use it with me Symbian phone... Now i have a TyTN and all works great
I stopped using sync on my TyTN with my CK3300. Instead I exported all my contacts from Outlook with the Parrot App, and pushed them over bluetooth to the kit.
You need to select the SonyEricsson K800 NO SYNC when pairing the TyTN so it doesn't sync. The advantages with this is that you can use the dual keyword (name then home/work/mobile) instead of the default sync that just puts all numbers in one long list.
Parrot CK3000
I am using a TyTn with a simply Parrot 3000. It works well. If you have a problem with it, reset the Parrot.
Hi all,
Is there a way to force the 8525 to disconnect from one BT handfree device and connect to another?
Problem is my handsfree link in my Acura ALWAYS grabs the bluetooth connection on my 8525. Sometimes i want to have it connect to my jawbone headset- but there is no way to turn off bluetooth in the acura without getting a nagging message every 30 seconds that it thinks the 8525 is trying to pair with it.
I just want a way to tell the 8525 to break its connection to the acura system, and connect to my jawbone.
Any idea?
Thanks in advance!
Hi all,
I just got a DEH-P9800BT bluetooth cd player, but I can only figure out a way to send each phone number one at a time. Is there a way to send my entire phone book to the unit at once?
My Parrot carkit syncs automatically transferring all contacts.
Works out of the box.
I guess the audio system you mention should be configured to do that as well (maybe it just cant)
hi all,
is there a programme that would keep the BT link alive?
the problem is that my BT headset connection drops after a while and i have to repair the set. the headset is virtually unusable due to this....especially during driving.
i have checked the headset elsewhere and it works perfectly. tested it with Nokia 6600, Htc prophet, samsung mobiles.
thanx
And i thought I was the only one with this issue
When i have my phone linked to my BT carkit after a call ended a) i cannot receive any other calls or b)
the BT connection is interrupted...
really annoying
I did start with an application that will disconnect the BT after a call has ended and re-initilize it
would this work for you?
Mr_Gee said:
I did start with an application that will disconnect the BT after a call has ended and re-initilize it
would this work for you?
Click to expand...
Click to collapse
if it works for you, it would probably work for me
pls point me to it
thanx
hc4 inbox
junooni said:
hi all,
is there a programme that would keep the BT link alive?
the problem is that my BT headset connection drops after a while and i have to repair the set. the headset is virtually unusable due to this....especially during driving.
i have checked the headset elsewhere and it works perfectly. tested it with Nokia 6600, Htc prophet, samsung mobiles.
thanx
Click to expand...
Click to collapse
Yes it can be done via this small application that I've attached to my reply, basically what it does is it lets configure which folder to receive all files received via bluetooth on you storage card or phone memory as you please and it gives extra infoon bluetooth transfers like ETA and transfer rate and "IT KEEPS BLUETOOTH ALIVE at all times" so you can receive bluetooth files even when your device is not active.
You can find the original post here: http://forum.xda-developers.com/showthread.php?t=407291&highlight=hc4_inbox