Just a quick question, can Nexus 7 work as USB Host ? Just like in our PC , the PC is working as USB host and can accept many USB devices like thumbdriver , does Nexus 7 support this feature or not ?
conorlee said:
Just a quick question, can Nexus 7 work as USB Host ? Just like in our PC , the PC is working as USB host and can accept many USB devices like thumbdriver , does Nexus 7 support this feature or not ?
Click to expand...
Click to collapse
This feature is called OTG or On the Go.
And yes it does. I have tested two things.
1) 32GB USB flash stick (works perfectly with stickmount)
2) Logitech G15 keyboard as host + saitek GM-3200 mouse. Both work fine together.
i'm not able to use my thinkpad keyboard...
it works just fine with a OTG USB adapter on my gnex but nothing on the nexus7 - this really annoys me!
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
davirofe said:
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
Click to expand...
Click to collapse
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
davirofe said:
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
Click to expand...
Click to collapse
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
gwaldo said:
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
Click to expand...
Click to collapse
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
davirofe said:
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
Click to expand...
Click to collapse
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
gwaldo said:
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
Click to expand...
Click to collapse
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
davirofe said:
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
Click to expand...
Click to collapse
My dongle model is the same.. strange that it still works on PC/Mac (loading drivers) :/ dont know sorry...
Even with a BT4 USB adaptor, I doubt it would work on the MOJO because android 4.3 doesn't support BT4.
Raise a support ticket on the madcatz site.
that's a bummer, hope you get it fixed soo.
Same Problem here, Mojo paired with my phone but not with the controller. But the Controller works fine with my Nexus 5.
Same problem here. MOJO support doesn't seem to be much help other than disconnect it and reconnect but I can't even get it to pair. Anyone found resolution for this?
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
laywaste said:
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
Click to expand...
Click to collapse
No, don't bother.
FYI: @Coolin82 @rmraiden
TMK, the only thing you can do is install the lollypop custom rom, it doesn't need the dongle and pairs fine without it.
See the development forum.
Wow! That's really strange, I use the dongle on my PC(linux/XP) and mojo.. never had issues it, it just works.
Mine is now working. Mad Catz RMA'd my controller and sent me the new CTRL that doesn't require a dongle. Gaming is so much better now!! :laugh:
Oh nice, you got a retail version.. it has BT2 and BT4 that's why you don't need the dongle.
any solution ?
Hello. Had my note 4 since release and just now trying to use usb host / otg and having no luck. Absolutely no devices are working on my note 4. Tried the otg adapter on my nexus 10 and its fine so unless there is a special adapter needed for the note 4 the otg cable is not the problem. I have tried a xbox controller a mous and a thumb drive and nothing not even led lights showing activation.
So any advice or is my usb port bad? Been using vanilla android for a while (nexus devices) is there a setting im not use to maybe?
solved
It appears my motorola otg is not compatable with the note 4. Tried a samsung otg and all works. Guess not all cables are equal?
Excuse me if my English is unfortunate, I'm Argentine and I have to use Google Translate to talk to you.
Directly to the point, our Moto G5 plus or at least mine, is not compatible with the USB joystick, something similar to what happened with the Moto e2 LTE, but for the latter there was a kernel that allowed the use of USB Joystick:
https://forum.xda-developers.com/moto-e-2015/orig-development/kernel-srfarias-uberdt2wl-2016-04-27-t3366997
My question is this: is there any kernel or rom that enables the use of USB joystick?
I'm using AEX Pie rom and I can confirm my otg wireless dongle connects to my Xbox style controller and can play asphalt.
I'm pretty sure I have used it on my stock ROM while it was Android Nougat.
npradeeppai said:
I'm using AEX Pie rom and I can confirm my otg wireless dongle connects to my Xbox style controller and can play asphalt.
I'm pretty sure I have used it on my stock ROM while it was Android Nougat.
Click to expand...
Click to collapse
Yes, I understand that it is compatible with the wireless controls that are connected by a USB dongle, the problem arises when a USB Joystick is connected through otg, it is compatible with the mouse / keyboard but it is not compatible with the USB Joystick
It's as if I had not sent enough power to the USB joystick.
And it's not my joystick or my OTG since I connect it to a J5 prime and it works correctly
I must add that it is not my Moto g5 plus either, since it is the second one I own and in none there was support for the USB joystick
I found the same thing with my device and USB joysticks. They would power on, meaning the lights on the joystick would turn on, but no input would be detected.
I could only get Bluetooth joysticks to work.
Moondost said:
Yes, I understand that it is compatible with the wireless controls that are connected by a USB dongle, the problem arises when a USB Joystick is connected through otg, it is compatible with the mouse / keyboard but it is not compatible with the USB Joystick
It's as if I had not sent enough power to the USB joystick.
And it's not my joystick or my OTG since I connect it to a J5 prime and it works correctly
I must add that it is not my Moto g5 plus either, since it is the second one I own and in none there was support for the USB joystick
Click to expand...
Click to collapse
Hey, use octopus app, it available on play store , it should solve your problem, as the app is made for to use joy stock and other outputs. Give it a try i think it will work.
Hello all,
I have a USB type C to HDMI cable that I've had for a while now, and it has worked marvelously for connecting phones and laptops to the TV through HDMI. I have one small problem though, it does not work on my own Galaxy s9+ anymore. It still works just fine with other devices.
Does anyone have any advice on how to troubleshoot this problem? I would prefer to not have to flash my phone. It is the unlocked variant running stock firmware. Thank you!