Related
Just got a new Tab from a carrier shop here in Kuwait with some, let's just say, undesirable applications preinstalled which I would like to get rid off. Read all (well most of the posts) but getting nowhere.
Upgraded to new firmware through KIES.
downloaded Z4ROOT and rooted succesfully (or at least that,s what the app is telling).
Tried to copy the nv_data.bin file to my sd card - cannot be done
Tried to open nv_data.bin in HEXEDITOR - no can do
Tried to delete application - nope
So some help is obviously needed here if anyone is kind.
Best regards
You did install busybox, did you?
Which firmware? Post what you are doing on the adb shell. Be specific or we can't help you.
You're right should be more specific.
Well I did not install busybox (no idea what it is for) and
Firmware version is 2.2
Baseband version P1000JXJK2
Kernel version 2.6.32.9 [email protected]#1
Build No FROYO.JPJK2
Hope this clears it.
dsaric said:
Well I did not install busybox
Click to expand...
Click to collapse
Busybox gives you most shell commands (including, but not limited to, cp).
Thanks.
Installed BUSYBOX and copied nv_data.bin file to sd card for modification as per How to carrier/SIM unlock the Galaxy Tab topic from 17/11 but the address 0x181469 could not be found.
Also tried to uninstall the preinstalled apps - no success
need z4 unroot it
busybox
root explorer
Z4 unroot, DONE
BUSYBOX installed DONE
ROOT EXPLORER installed DONE
So
http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94
totaly worked for unlocking the SIM/carrier. Very easy and no problems encountered. Inserted a different SIM and made a call. Perfect. Thank you for all the work that made this possible.
However it still does not let me delete the APPs that came preinstalled with the Tab.
I am guessing this is something to do with the Kernel version 2.6.32.9 [email protected]#1. How can this be undone (another guess is flashing the ROM but i have no idea what it involves so back to the reading and learning)?
If somebody has a simple to follow guide and resolution to this please let me know the thread. Thanks
Have you mounted /system as r/w in Root Explorer?
Regards,
Dave
Dave, to advanced for me. How do i do that?
Just an update.
Managed to successfully flash the tab to the european version using guide from
[HOW-TO] Flash your at&t Tab to make calls + 1900+850 WCDMA - UPDATED
thank you it worked fine and i achieved what i was looking for: no more undesirable apps.
But, i lost the 3g and cannot get it back using the same guide as above.
With my limited knowledge of the whole thing I am guessing that this is to do with the modem.bin file. Will try to download an arabic version of firmware, extract it and try to use the modem file and see if it will work. will post an update just in case anybody is interested,
regards
I found it rather embarassing posting replys to my own thread all the time but I feel it might help somebody so what the hell!!
I finally got my 3G working on the Tab. A silly thing really: APN (Access Point Name) was deleted during flash and by adding and activating the APN i got my 3G restored.
Anyway, thank you guys for all the replies and help. Really good forum with a lot of useful stuff.
Regards
Hi everybody!
I can't use the external sdcard to backup my data with Titanium rooted. There is obviously a bug since it says I can't write on that directory/card. I already checked with scandisk. It was fine.
I heard about a bug in Android Kitkat. A story about wrong / new permissions. I am surprised that today, this problem is not fixed yet. I saw a solution where I have to modify some lines in the permissions.xml but ES Explorer refuses to save the file !! Moreover, people report a bug with the bluetooth ...
http://forum.xda-developers.com/showthread.php?t=2537793
Actually, I only want to flash a THL (Thailand) stock ROM although I am using a XTC stock ROM (Philippines). If I do it, I suppose it will reset my phone since these are different countries and CSC.
Boring. I am stuck now. Can't save my phone. Any ideas please?
Thank you!
Nemorensis32 said:
Hi everybody!
I can't use the external sdcard to backup my data with Titanium rooted. There is obviously a bug since it says I can't write on that directory/card. I already checked with scandisk. It was fine.
I heard about a bug in Android Kitkat. A story about wrong / new permissions. I am surprised that today, this problem is not fixed yet. I saw a solution where I have to modify some lines in the permissions.xml but ES Explorer refuses to save the file !! Moreover, people report a bug with the bluetooth ...
http://forum.xda-developers.com/showthread.php?t=2537793
Actually, I only want to flash a THL (Thailand) stock ROM although I am using a XTC stock ROM (Philippines). If I do it, I suppose it will reset my phone since these are different countries and CSC.
Boring. I am stuck now. Can't save my phone. Any ideas please?
Thank you!
Click to expand...
Click to collapse
If you're rooted , try this path /storage/extsdcard/Titanium Backup, or if you modified permission.xml already search for media_rw (grant permission rwxrwxrwx) then choose /mnt/media_rw/extsdcard/Titanium Backup.
Er,... Thank you but did you actually read my post? it doesn't work for me! I tried everything about that.
Thank you.
Edit : my bad, actually, adding some permissions, Here and there AND REBOOTING solved the problem. However, I'm surprised since the creator of the tuto I posted said we can't reboot or we loose the changes (^o^)
Sent from my SM-N9005 using xda app-developers app
Nemorensis32 said:
Er,... Thank you but did you actually read my post? it doesn't work for me! I tried everything about that.
Thank you.
Edit : my bad, actually, adding some permissions, Here and there AND REBOOTING solved the problem. However, I'm surprised since the creator of the tuto I posted said we can't reboot or we loose the changes (^o^)
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Glad you solved it , yes you need to reboot after you set the permission , except for media_rw , you need to set
the permission again after every reboot (for me).
Hello
The proximity sensor in my s5360 seems to require re-calibration.
I'm currently on stock kernel and stock rom version 2.3.6 with root. I've tried dialing *#7353# and in the 'Proximity Sensor' menu, the phone continuously vibrates and displays "Working", whether i put my finger near the sensor or not. I've also tried the Android Sensor Box app and in the 'Proximity Sensor' menu, it displays 0.0(cm) with no change in state upon obstructing the sensor.
Is there a way to adapt the method described in the following thread, or any other method for that matter, to calibrate my s5360's proxi sensor?
http://forum.xda-developers.com/showthread.php?t=2353972
Well if the above method doesn't work,it might be a hardware issue.Or else you can try flashing stock ROM of your region again.
aniket.lamba said:
Well if the above method doesn't work,it might be a hardware issue.Or else you can try flashing stock ROM of your region again.
Click to expand...
Click to collapse
Hi aniket.lamba
Thank you for your prompt response.
I cannot use the method described in the above-mentioned link because the path "/sys/class/sensors/proximity_sensor/prox_cal" isn't available in my phone.
Is there an alternate path I can use to perform the re-calibration?
Whuazzup said:
Hi aniket.lamba
Thank you for your prompt response.
I cannot use the method described in the above-mentioned link because the path "/sys/class/sensors/proximity_sensor/prox_cal" isn't available in my phone.
Is there an alternate path I can use to perform the re-calibration?
Click to expand...
Click to collapse
So you need to add that file to your ROM.Grab it from any other stock ROM and push it via the desired path.
aniket.lamba said:
So you need to add that file to your ROM.Grab it from any other stock ROM and push it via the desired path.
Click to expand...
Click to collapse
Ok, I have limited knowledge in working with ROMs and I don't know how to go about and get the said file from a ROM. I tried downloading stock ROM for my region and there are 3 files in it, namely csc...md5, modem...md5 and pda....md5. Will I find the file among these? With what program do I open these stock ROM files?
Please advise
P.S: I did manage to flash, following the instructions from marcussmith2626's thread http://forum.xda-developers.com/showthread.php?t=2568853 but the proximity sensor problem persists. Without resolving this, I cannot make regular calls properly (phone screen blacks out during calls and stays as such until i remove the battery), nor can I call using Viber or Skype
Whuazzup said:
Ok, I have limited knowledge in working with ROMs and I don't know how to go about and get the said file from a ROM. I tried downloading stock ROM for my region and there are 3 files in it, namely csc...md5, modem...md5 and pda....md5. Will I find the file among these? With what program do I open these stock ROM files?
Please advise
P.S: I did manage to flash, following the instructions from marcussmith2626's thread http://forum.xda-developers.com/showthread.php?t=2568853 but the proximity sensor problem persists. Without resolving this, I cannot make regular calls properly (phone screen blacks out during calls and stays as such until i remove the battery), nor can I call using Viber or Skype
Click to expand...
Click to collapse
1.Download any flashable zip of any custom ROM (say,Hyperion 9)
2.Locate that file with the given path in Hyperion 9's zip
3.Copy that file to the root of your sd card and navigate that file with a root browser on your phone and again copy that file and paste in the ROM you are using currently (via the actual path,ofcourse).
Need HELP @ Note 3 ( SM-N9002 / SM-N9009 ) SIM2 Call Audio/Mic Routing & MagMa-NX ROM
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
I think I figured something. Everytime I attempt to make a phone call on this, I get to choose from which sim card should I dial, #1 or #2 , but what I have noticed now is that I am being asked "SIM1" or "Slot2" ... SLOT 2 I thought? That may be the reason that audio routing doesnt work well for this... tried searching build.prop but this string is not there and I just dont know where to search for this string to get this fixed, anybody can chime in?
Thanks
Did you figure it out ? As i have the same problem with the same rom in addition that when i call anyone and he is on a call i don't get notified with " call waiting
Mr.Ultimate said:
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
Click to expand...
Click to collapse
Which CSC did you choose?
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Mr.Ultimate said:
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Click to expand...
Click to collapse
Well, i know that mixer paths are different on single sim and dual sim phones.
Can you extract from stock rom the file "/system/etc/mixer_paths.xml" and overwrite the one in custom rom ?
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Mr.Ultimate said:
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Click to expand...
Click to collapse
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
zlazaar said:
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
Click to expand...
Click to collapse
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Mr.Ultimate said:
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Click to expand...
Click to collapse
Path : /system/csc
Indeed, conflits may happen. But just dump it and let we examine it.
Ok here is what I managed to try, I backed up stock rom android 5.0 all working state mixer files from etc dir, then flashed magma rom again, backed up those same files for restoration to working state, replaced files with ones extracted while on 5.0 stock android, reboot device, no sound whatsoever, phone wont even buzz keypad dialtones or connect dial phonecalls just hangs. So I went and restored back original magmanx rom mixer files, reboot, but still no success... so now I have just finished restoring 5.0 again, will dump csc folder and share with you. will also need to charge my battery a bit because @ 30% cant expect much to happen when flashing magma nx...
Thanks for the help amigo!!!
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Mr.Ultimate said:
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Click to expand...
Click to collapse
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
zlazaar said:
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
Click to expand...
Click to collapse
amazing, will try in few mins
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Mr.Ultimate said:
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Click to expand...
Click to collapse
Did you checked correct permissions before reboot ?
I'm afraid the problem is deeper than mixer paths.
I'll try to digg more.
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Mr.Ultimate said:
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Click to expand...
Click to collapse
The file "mixer_paths.xml" must have permission set to 0644 (like other files in /system/etc directory).
And try darklord Kernel.
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Mr.Ultimate said:
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Click to expand...
Click to collapse
Sorry i just noticed you already have darklord kernel.
And set permission like other files in this directory (if not already done by your file manager).
Hi everyone
I got a Wiko Highway (french), Canvas Knight A350 for you
He is slow, freeze, no more space. So i come here to install an updated ROM
2Go internal space for system and 10Go for user media shown in a "sdcard" (but not physically one)
my phone was rooted, i've installed phylz recovery (from : https://forum.xda-developers.com/canvas-knight/development/miui-8-canvas-knight-a350-mt6592-t3529989 links)
installation of recovery worked fine with https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=fr
i've reboot in recovery, wiped all.... then bug (or i havn't wait enough long) i've shut down then loop boot
i've reinstalled original build, a stock version from an officiel .exe (HIGHWAY KITKAT_V19.exe) it work and put all the phone like the first time (with my 10go user space)
i re do a root (kingo root) / recovery (phylz by rashr) / in recovery i wipe all, install from zip, then... no sdcard, it take a folder sdcard in the data of the 2Gb space, can't find my "10go sdcard" directory :/
then i've mount usb, transfered the rom in the 2Gb data/sdcard folder, installed the rom, worked but and got a phone with totally 2gb space for system/data/media no more intern sdcard T-T
any idea ?
it look like the problem is link to v1 v2 v3 things, did i missed something to do from stock rom v? to recovery v3/rom v3 from now ? wrong recovery ?
thx
- news :
> on officiel stock rom 4.4, i get back my 10go media place, deleted it / plug to computer to format in fat32 / used an internal sdcard fix / same pb nothing detected in the recovery :/
ok finally found !
wish it will help some other people !
the problem is that i'm not only a newbie, i'm french too (i see your smile ! )
seriously, its hard to find help about this problem cause we are not on the same start :/
looking here or other international forum for helps was hard (cause unknown prolem)
looking on french forums for helps was useless (cause they are french and just copy paste this forum, smile again)
so ! The solution is that my a350 is a "wiko highway", who got for last official update a stock rom v2.
like a newbie, i've installed a v3 recovery and a v3 rom on my phone like i read everywhere "just follow the steps"
yep but add, start from a stock rom v3 please :3
I had to install a stock v3 rom (sp flash > format phone > install a350 v3 stock rom) : now have 12.06GB phone place.
recovery now detect my internal sdcard, installation work, new roms work, got my full space
/ ! \ now got communication problem T-T, all work even data for internet but no phone no sms. ime = null, many post on this but not easy to resolve :/
- flashing back french orignal rom fix nothing
- changing with another sim card change nothing :/
>> i used fix ime apk (Chamelephon), to enter my ime manually, resolve call/sms but not sure i'm 100% bugless
/ ! \ bluetooth dont work (on slim6 rom, havnt test others)
>> had to insist, work
Yotitchy said:
ok finally found !
wish it will help some other people !
the problem is that i'm not only a newbie, i'm french too (i see your smile ! )
seriously, its hard to find help about this problem cause we are not on the same start :/
looking here or other international forum for helps was hard (cause unknown prolem)
looking on french forums for helps was useless (cause they are french and just copy paste this forum, smile again)
so ! The solution is that my a350 is a "wiko highway", who got for last official update a stock rom v2.
like a newbie, i've installed a v3 recovery and a v3 rom on my phone like i read everywhere "just follow the steps"
yep but add, start from a stock rom v3 please :3
I had to install a stock v3 rom (sp flash > format phone > install a350 v3 stock rom) : now have 12.06GB phone place.
recovery now detect my internal sdcard, installation work, new roms work, got my full space
/ ! \ now got communication problem T-T, all work even data for internet but no phone no sms. ime = null, many post on this but not easy to resolve :/
- flashing back french orignal rom fix nothing
- changing with another sim card change nothing :/
>> i used fix ime apk (Chamelephon), to enter my ime manually, resolve call/sms but not sure i'm 100% bugless
/ ! \ bluetooth dont work (on slim6 rom, havnt test others)
>> had to insist, work
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Flash this sim fix from recovery after flashing rom without wiping anything.
Mr.Ak said:
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Flash this sim fix from recovery after flashing rom without wiping anything.
Click to expand...
Click to collapse
ho thx for reading XD
i'm desperate XD
after my 2 heavy post, i didn't want to monologue again but i'm still in trouble
the Chamelephon solution half work, i cant send sms. but i recieve, so i've format again for stock french rom, dont work.
i came back on the slim rom (same history with other custom rom, i prefer this one ^^)
sometime i got data connection (can go internet) other times no, but sms is constant, i receive, i dont send. (i've been able to send 1 time at begin dunno why :/)
i've just factory reset :
- bluetooth hard to appair, but i think its just a ****ty bt appairing thing so don't care i think
- pb with chrome to download in "sdcard", but perhaps a bug after many things done on phone
- pb with music app to find music in sdcard, but with an explorer i see them
maui, mtk eng, mtk droid tool, SN Write Tool, tools who seems to not work all on custom rom for me...
So i tried stock us rom, maui worked, i've put back ime (i think) now i kingo-root/recovery and flash slim rom
then i'll certainly have bugs again and test your zip thx !
what the detailed (advanced?) goal(s) of this zip ?
Yotitchy said:
ho thx for reading XD
i'm desperate XD
after my 2 heavy post, i didn't want to monologue again but i'm still in trouble
the Chamelephon solution half work, i cant send sms. but i recieve, so i've format again for stock french rom, dont work.
i came back on the slim rom (same history with other custom rom, i prefer this one ^^)
sometime i got data connection (can go internet) other times no, but sms is constant, i receive, i dont send. (i've been able to send 1 time at begin dunno why :/)
i've just factory reset :
- bluetooth hard to appair, but i think its just a ****ty bt appairing thing so don't care i think
- pb with chrome to download in "sdcard", but perhaps a bug after many things done on phone
- pb with music app to find music in sdcard, but with an explorer i see them
maui, mtk eng, mtk droid tool, SN Write Tool, tools who seems to not work all on custom rom for me...
So i tried stock us rom, maui worked, i've put back ime (i think) now i kingo-root/recovery and flash slim rom
then i'll certainly have bugs again and test your zip thx !
what the detailed (advanced?) goal(s) of this zip ?
Click to expand...
Click to collapse
To fix Invalid Imei/Sim issues/serial issues/Null Imei/No sim/Network drop..
It converts spft flashable files(sec**.img) into recovery flashable zip.
If this works,book a trip for me to France.
heh
quite hot now in france btw ^^
fix done, no change :/
to be short if it can help to understand the mistake :
- got a 4.4 highway stock rom (didnt know but seem to been a v2 with 2gb intern memory and 10gb fake sdcard)
- phone is rooted with kingoroot, i used apk rashr to install phylz v3 recovery for a350
- i install a new rom v3 (slim/resurection/linage for example)
- i got only 2gb memory, no more sdcard, 10gb nowhere.
- i understand the v2 v3 thingie
- i use sp flash tool, to install custom rom (firmware update), same pb
- i use sp flash tool, to format phone (mistake i think), then format + firmware update with stock rom, i got my 12gb memory
- i use kingoroot / rashr / phylz to install custom rom v3, i got my 12gb memory
- i'm happy, but never test for each step the mobile function T-T
- cant phone, error translated : "no mobile band"
- i found the imei problem, yes i dont have imei
- get them back with apk Chamelephon, was looking good, phone, music, bluetooth hard to connect 1st time but ok
- but finally.... cant send sms. T-T
- I try reset factory, dunno if related but then chrome cant find sdcard to download, same for music app.
- wipe again, no more imei, tools to restor imei dont seem to work
- wipe again for us stock rom, maui work, i enter my imei
- still same pb, worst, got 3g icon, but no internet. then got it worked alone sometimes
- kingo root, rashr, phylz, wipe again "for a new rom", slim rom, reboot, sim fix, reboot
- same, no new thingie, dont see if something changed :/ (think the maui imei tool worked good, still have imei, or your fix too dunno)
2 bugs :
>> can't send sms, but i receive, can't find where to put the "mobile sms platform number", i can phone.
>> still got problem with apps who make **** for saving files on "sdcard" (save for example in storage/emulated/0/android/data/com.app.etc/files instead of simply simply storage/app/file or storage/download or storage/image etc :/
sorry for annoying
>> can't send sms, but i receive, can't find where to put the "mobile sms platform number", i can phone.
Click to expand...
Click to collapse
#*#*4636#*#* : couldn't do it before dunno why i can now, put my provider sms number in SMSC +33695000695 (for free mobile) there is a pdu format (no use for me) 079 133 960 500 96f5 or 06950006950000 dunno what is it
so :
SMS : send / receive ok
MMS wifi connected : send receive ok
MMS wifi off : can't
now i have a new past problem XD on my band icon i got a "!" no data, no mms work :/
this morning "!" was nos there, internet was working, really dont get it T-T
>> still got problem with apps who make **** for saving files on "sdcard" (save for example in storage/emulated/0/android/data/com.app.etc/files instead of simply simply storage/app/file or storage/download or storage/image etc :/
Click to expand...
Click to collapse
better but no perfect this merged storage, some apps don't like ? fix ?
ok i abandon
i've try many things
still can't send MMS
and get the ! on my data signal : no more internet
can't resolve these both bugs :/
i came back on French stock rom HIGHWAY KITKAT_V19.exe from official wiko website
got the nvram bug, but data and mms work
help is welcome, for now i stay on old v2 stock rom :/ with crappy 2.4Go phone storage :/
Yotitchy said:
ok i abandon
i've try many things
still can't send MMS
and get the ! on my data signal : no more internet
can't resolve these both bugs :/
i came back on French stock rom HIGHWAY KITKAT_V19.exe from official wiko website
got the nvram bug, but data and mms work
help is welcome, for now i stay on old v2 stock rom :/ with crappy 2.4Go phone storage :/
Click to expand...
Click to collapse
Maybe a issue with your carrier?
Mr.Ak said:
Maybe a issue with your carrier?
Click to expand...
Click to collapse
no, i've put back the official stock rom with the french website exe : http://support-fr.wikomobile.com/update-137-mise-jour-highway
and no more bugs :/
i've re tested to update to rom v3 (perhaps i did something wrong like formatting the 1st time) but still same pb data "!" and no mms
so still on kitkat stock rom, but old version and no space for apps then T-T
Yotitchy said:
no, i've put back the official stock rom with the french website exe : http://support-fr.wikomobile.com/update-137-mise-jour-highway
and no more bugs :/
i've re tested to update to rom v3 (perhaps i did something wrong like formatting the 1st time) but still same pb data "!" and no mms
so still on kitkat stock rom, but old version and no space for apps then T-T
Click to expand...
Click to collapse
If you want to increase storage for apps on v2,visit miui 7 thread,it has ebr which you can flash through sp flash tools to increase app storage to 4,8 or 16gb as you like.