Related
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Re: To FIX WIFI, Going to reflash cingular ROM & test. O
danrw84 said:
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
Click to expand...
Click to collapse
I had same problem after upgrading MDA pro with new iMate rom 1.30
I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.
Manually enter IP address could solve the issue?
ethorn said:
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Click to expand...
Click to collapse
Same rom for me too. I can detect the routers but cannot connect...
I just ran K-JAM_WWE_216901_2169101_020710_ship.exe, let that instal, and also let the customizations install. Nothing else.
Any ideas?
is it not detecting, not getting an IP, or getting an IP but not getting out?
ethorn said:
is it not detecting, not getting an IP, or getting an IP but not getting out?
Click to expand...
Click to collapse
I have the same problem. In fact I started a thread about it a couple days ago. It connects, but doesn't allow data to pass (I do get IP Addy). I also can't use passthrough on the laptop.
I loaded a very few of the Cingular cabs and actually narrowed it down to one of two that totally killed my WiFi connection. However, if you find the thread I made, I also found a registry entry referring to a preferred connection, and MEdia Net was in there (I'm thinking is the problem, but don't know how to change).
Used aWizard and sucessfuly installed the Cingular ROM i got from the XDA ftp site.
WiFi works like a charm, with the same settings that the unit had with the new IMATE ROM. This is very upsetting!
Anyone have any clue why this is?
Also - since I am not using the IMATE ROM anymore, any way to restore the original boot screens, delete the HTC one, and the IMATE screen and replace it with the Cingular? Reason I ask is i need to exchange this phone within my 30 day return period because the keyboard is loose.
Thanks
Well I upgraded to DCD 3.2.4 and 3.42.50 radio rom. For some reason now I cannot get a connection through WiFi , it gives me errors such as: Cannot obtain a server assigned IP address. Try again later or enter and ip address in network settings. It also says it cannot connect to the network at times.
I am on the Verizon Wireless network. Thank you in advance for your help.
Also , how do you completely remove the program it does not want to come out of my programs list.
please post in the appropriate ROM thread, so in your case is DCD ROM thread,.
for a better check, install ORIGINAL ROM, if you still have the problem, then consider for warranty return,.
This is concerning WiFi connecting though.?
Hello to everybody. I tried to search this forums, but didn't find the solution.
Is it possible to disable WPA2 wifi authentication in windows mobile 6.1 device? I have issues with connecting to WPA2/AES network (device crashes to black screen). Manual setting to WPA/TKIP does not work, because it is overrided with WPA2/AES.
Some information here on the MSDN website:
http://msdn.microsoft.com/en-us/library/aa916274.aspx
There doesn't seem to be anything to disable WPA2 though
Thanks for the links. But after long time googling and reading some technical stuff, I am more and more convinced, that it is hardcoded into wifi drivers and it isn't possible to change it .
Better solution should be use of correct-WPA2-working driver, but I am neither programmer, nor experienced cooker to use driver from different type of WPA2-working device with same wifi chip.
EDIT: I found, that it crashes before showing of login dialog (PEAP auth), so that must be problem with WPA2 pre-authenication.
torrentonly said:
Thanks for the links. But after long time googling and reading some technical stuff, I am more and more convinced, that it is hardcoded into wifi drivers and it isn't possible to change it .
Better solution should be use of correct-WPA2-working driver, but I am neither programmer, nor experienced cooker to use driver from different type of WPA2-working device with same wifi chip.
EDIT: I found, that it crashes before showing of login dialog (PEAP auth), so that must be problem with WPA2 pre-authenication.
Click to expand...
Click to collapse
I have WPA2/AES working on my Kaiser with the (almost) stock 5.2.19212 ROM. I did update the WiFi driver in my kitchen though (TNETW1251.dll version 3.55, dated 10/06/2008). I have never had any issues with WPA2 though, even before I upgraded to WM6.1.
Andy
I have Vox and it crashes with every ROM, original & custom without difference. Mainboard replacement didn't solve this problem, so that must be software issue. Where did you get that updated TNETW1251.dll? Here I only found patched one for ICS.
torrentonly said:
I have Vox and it crashes with every ROM, original & custom without difference. Mainboard replacement didn't solve this problem, so that must be software issue. Where did you get that updated TNETW1251.dll? Here I only found patched one for ICS.
Click to expand...
Click to collapse
I can't remember where I got it from originally - more than likely a post in the Kaiser ROM Development forum. I am not sure its the same driver on the VOX but here it is anyway (just delete the .zip extension).
Andy
Too bad, another driver for same wifi chip doesn't work (doesn't load on startup). Maybe because of different chipset. But thanks anyway.
I am trying to connect to my university's wireless.
We have two different wireless ssid's that i can connect to with my laptop.
The first, called UBC is unsecured, but when you connect, it takes you to a web page where you enter your username/password.
The second, called ubcsecure, can authenticate with either WPA2 or WPA ( it shows up as WPA2-Enterprise).
The encryption method is AES for WPA2, and TKIP for WPA.
EAP type: PEAP v0 , Authentication protocol is MS-CHAP-V2
there is an option for mutual authentication using a certification server:
secure.wireless.ubc.ca
I am unable to connect to either using the stock HTC magic ROM, the HoFo community rom, and most recently, myHero 1.0.1
I have tried editing /system/etc/wifi/wpa_supplicant.conf to include
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
Any ideas as to how to connect?
Data wipe.
Try to reset your phone's basic settings.
It could rebuild the information necessary to acquire the specific IP from their connection.
Manually entering the data couldn't hurt either. This is something that usually I would consider consulting the school about. Privatized internet connections could cause a number of issues for those seeking to utilize Wi-Fi.
The NAT settings might be too strict to support a handheld device.
Me too!
have you found any other solution??
i m here in ubc as well with my htc magic 1.5
when i'm trying to connect to ubc,, it keeps requiring the ip but doesnt connet
and ubcsecure doesnt even show up!
is really frustrating not being able to use internet in universityyy..
i thought by activating the wpa enterprise will work for the ubcsercure, i guess not??
will any of the heros rom work??
Im having this problem too.. anyone find a fix?
I have no idea why but ubcsecure seems to be working using JesterBlur ROM. http://forum.xda-developers.com/showthread.php?t=567122
it works on the Dream? or sapphire? I don't think it matters but... be interesting to know
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Ask for working setting
absolutcamper said:
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Click to expand...
Click to collapse
Did you use the UI setting or you edit the "wpa_supplicant.conf" file manually?
would you please send us your "wpa_supplicant.conf" file or its ubcsecure part? it would be the great help to have a working setting.
Cheers,
Ali
I used the UI that came up during first boot. How can I get to that file?
the wpa_supplicant is in /data/misc/wifi. But considering how it works using the ui settings, i dont think changing the config file will work...but please still post it.
I also tried replacing the wlan.ko from the jesterblur rom... and doesnt seem to be compatible with magic which is apparently normal because there is a patch for magic users that fixes wifi apparently. I will try the wlan.ko from the fix soon probably to see if it works.
Hi guys,
I'm at UBC with the same problem (I can't even connect to the regular UBC network). I went to the UBC help desk and they basically told me that they don't support android at all. The funny thing is I can connect to the fatport network with no problems but cannot connect to ubc, ubcsecure or eduroam networks on campus. I'm currently runnning on Cyanongen 4.2.4 (waiting for 32a kernel to upgrade to 4.2.5) on a rogers htc magic.
Anyway, the point of this post. If anyones interested in meeting up at UBC to find a solution to this problem it'd be great. I'm hoping we can eventually create a package of some sort that'll fix any android phone but lets focus on fixing the current prob first.
Also @fnkaze - aren't the dream and sapphire the same thing?
Er, i think the dream is the G1 and the sapphire is the G2 aka the rogers magic... well i think the dream has a differnt wifi driver? maybe.. thats the problem
I think the reason why they dont support android is because the stock rogers rom doesnt have native wpa2 support i think.... but the custom roms should have it.. the hero rom does have it... at home my wpa2 wifi works fine
I can also connect to fatport, i think the eduroam is also using the same thing...tho ive heard eduroam seems to work on the rogers rom at different univeristies..
I still have yet to try the jester rom wifi driver tho, ill try it soon...
Thanks for the clarification. And the reason eduroam works at other universities is because the WPA encryption settings are based on the uni's actual/main wireless network. So at different universites the authentication protocols might be a bit different.
What phone do you have? The dream or the magic? The jester rom doesn't work on my magic.
i have the magic, but i think it should work on the magic, they also have a seperate patch to get Wifi working for the it.. so im assuming its possible..
So yeah, Concordia University in Montreal has the same WPA2-Enterprise and this is how I got WIFI to work on my Magic (with HoFo's Sense UI ROM, would still probably work with a rooted 1.5/1.6 ROM)
In fact it will probably work with any rooted Dream or Magic
Remember you need your phone to be rooted for this to work, you will also need to have the drivers installed for your phone from the Android SDK.
- Go into recovery mode
- mount the /data/ folder
Code:
adb shell mount /data
- With ADB Pull the /data/misc/wifi/wpa_supplicant.conf file to your computer (in this example it will go to the tools folder where you have your androidsdk)
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf .
- Make a backup of your conf file in case you mess something up
- Edit it and add in the configuration settings given by your University for Linux wpa_supplicant.conf files, so in your case
Code:
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
- With ADB Push the wpa_supplicant.conf from your computer to the /data/misc/wifi/ folder
Code:
adb push wpa_supplicant.conf /data/misc/wifi/
mydewji13 said:
UBC help desk and they basically told me that they don't support android at all.
Also @fnkaze - aren't the dream and sapphire the same thing?
Click to expand...
Click to collapse
Honestly that person at the helpdesk probably doesn't even know what Android is. If they says they don't support Android at all, well using their logic any Linux distro using wpa_supplicant.conf isn't supported which OBVIOUSLY isn't the case.
And no the Dream and Magic are far from being the same device.
Thanks!
I'll try this solution and see if it works. Will post back to let you know how it goes.
Hi,
Ok, I just finished installing the sdk, fixing udev to recognize my phone etc...
The problem I'm having is that everytime I run:
Code:
adb shell mount /data
I get the following error:
Code:
mount: cannot read /etc/fstab: No such file or directory
Help?!?!
NVM after reading the adb -help i tried this:
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf /home/myuser
Ok something really wierd happened...I pushed a new wpa supplicant file and the rebooted the phone and it stopped seeing wireless networks! But ubcsecure showed up as a known network. If I long press it an 'forget it' I can see networks again, but still cant connect to any ubc network?
WTF>?
Is there anyway I could use by ubuntu wpa_supplicant settings? Anyone know where the file is on Karmic? b/c I cant find it at all
Hey everybody.
Since updating to the OTA 1.25.405 update, USB internet connection sharing seems to be broken. It used to work before the update.
Phone gets registered as a USB 3G modem
Connecting works, getting an IP (192.168.100.100) works.
... but the default gateway (192.168.100.254) is unreachable when using the connection, so actually retrieving data is not possible.
I'm running the stock HTC Rom on a rooted wildfire - see attached file for software details.
Is anyone else experiencing this behavior?
Have you tried on several OS yet ?
It works for me, as we figured out on IRC yesterday, but not 100% sure of my ROM. Systeminfo shows Puzzle ROM but i am sure i used the RUU from shipped-rom then a backup of my data.
Yep, same behaviour on several OS'es. Device registers fine, but default gateway does not respond.
Forceflow said:
Hey everybody.
Since updating to the OTA 1.25.405 update, USB internet connection sharing seems to be broken. It used to work before the update.
Phone gets registered as a USB 3G modem
Connecting works, getting an IP (192.168.100.100) works.
... but the default gateway (192.168.100.254) is unreachable when using the connection, so actually retrieving data is not possible.
I'm running the stock HTC Rom on a rooted wildfire - see attached file for software details.
Is anyone else experiencing this behavior?
Click to expand...
Click to collapse
This happened to me after an OTA upgrade
I am doing a factory reset tonight and will post the result if it makes things work again (albeit losing my data)
The same problem with USB connection sharing
http://cleanimport.xda/index.php?threads/802404/ - Here I describe exactly the same problem I also have a rooted (unrevoked) wildfire with the original rom with update 1.
What I discovered about it is that the problem does not exist until first restart after a hard reset (factory defaults). I am in the Polish gsm provider Play.
Please help us as I believe there is more of us.
Greetz,
Bronek
Wildfire problem with USB sharing / tethering solved
shipped-roms.com/shipped/Buzz/RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
THe problem existed in 1.25.405.1 ROM . It does not exist after installing the 1.37.405.1 to which I give link above. It is a later version of original ROM. It includes Polish, Romanian, English and STH cyrylic alphabet.
I installed it from an WinXP machine with drivers from the SD card. I encountered problems trying to do it from Win7 originally.
Greetz!
EDIT: Though I experienced some problems with accessing the app market after flashing 1.37.405.1.
same problem here
the same story, after update to 1.25.405.1 sharing stopped working
funny - among many failed attempts to connect, one time was successful!