Database Users

[help]my galaxy s i9000

my galaxy s i9000 wont start up .i start the phone and stucks on at&t screen i install before one click lag for captivete anybody please help me

your in the wrong thread here, anyway, can u get download mode working ?

no i cant do the 3 button combo its not working. and if i put the phone to the computer be usb cable my computer dosnt find it

Then there are two last resorts:
- see this post http://forum.xda-developers.com/showthread.php?t=819551&highlight=usb+jig
- bring your phone to a Samsung repair centre

i think you need to go to repairing center r if you have ufs box flash your phone with box
and i think there is no other way
regards

Should have posted in general. Anyways if you can't get into download mode the only way is to make a usb jig, or buy one from ebay.

And should have posted in Captivate.

thanks very much it works with the jig i get to download mode but now what i need to install?helpp

http://forum.xda-developers.com/showthread.php?t=882014
Block 2 ODIN method .
http://forum.xda-developers.com/showthread.php?t=818556
jje

Galaxy

Galaxy

claudiudanila said:
Hi everyone, I have a big problem on my phone (SM-N910F) does not start even in download / recovery mode, the screen is off. I think it's a "hard brick."
All I can see now in device manager is Qualcomm HS-USB QDLoader 9008 (COM7).
Is there any possibility to bring my phone back into download mode? Please help me !!!
Click to expand...
Click to collapse
Well lets start by telling us what you did to the phone to get you where you are. And, what model is the N910F?
EDIT: is the "F" version for Europe?

Galaxy

What happens when you try to enter download mode?

Galaxy

claudiudanila said:
Thank you, I own a Samsung Galaxy Note 4, model SM-N910F for Europe.
I used a zip package to run a script via TWRP. The script was erasing some applications(bloatware) from rom. After the script was executed, I forgot to execute a wipe data/cache/factory and my phone was started to boot. After touchwiz was initialised, 3 seconds later my phone froze. Then I removed the battery and...here I am.
My computer is able to detect the phone(i can see in device manager Qualcomm HS-USB QDLoader 9008 (COM7) but Odin is unable to see any phone connected.
I've already tried an USB JIG but nothing...
I found an interesting thing, I can connect to the phone using QPST, please find attached a screenshot(Capture1.png). Here I found an option named Software Download. I've clicked this option and i can see: COM7 Phone in Download Mode. Please look at the attached picture Capture3. Here I can see two options: Phone Image and Boot image. Can I upload some specific boot image to unbrick my phone?
Click to expand...
Click to collapse
Not sure I can help you but you may be using a corrupted program, QPST. See here: http://forum.xda-developers.com/showthread.php?t=2263391
When the phone is hooked up to the charger do you get a charging indication on the LED? Is the battery charged or at least have some charge left on it?
Have you removed the battery and then tried to boot. If not give that a try. The only other recommendation I can offer since I've never used QPST and I don't know what script you ran to remove bloatware so I can't tell what it potentially did is to try to recover your phone through Kies (Samsung software). I seldom recommend Kies and have never used it myself since I have an unlocked bootloader, but if Kies recognizes your phone there may be hope. Good luck.

claudiudanila said:
Nothing...the screen is black, i cannot see anything, also Odin is unable to see the phone.
Click to expand...
Click to collapse
well it is weird that QPST shows you are in download mode but odin cannot see it.

Galaxy

Galaxy

claudiudanila said:
No led..no indicator..nothing...Kies is also unable to see the phone.
Click to expand...
Click to collapse
Sorry claudiudanila, based on what you've told us I have no other ideas.

claudiudanila said:
Hi everyone, I have a big problem on my Galaxy Note 4 phone (SM-N910F) does not start even in download / recovery mode, the screen is off. I think it's a "hard brick."
All I can see now in device manager is Qualcomm HS-USB QDLoader 9008 (COM7).
Is there any possibility to bring my phone back into download mode? Please help me !!!
Click to expand...
Click to collapse
I hope you are using windows pc not mac for odin.

jdomadia said:
I hope you are using windows pc not mac for odin.
Click to expand...
Click to collapse
Judging by the screenshots i would say its windows.
That said, I don't think I have any more ideas to add to the solutions already suggested.
You might wanna try your luck with z3x box or visit samsung service center.. that's all there's left to add.

maksharma231 said:
Judging by the screenshots i would say its windows.
That said, I don't think I have any more ideas to add to the solutions already suggested.
You might wanna try your luck with z3x box or visit samsung service center.. that's all there's left to add.
Click to expand...
Click to collapse
Using windows in mac parallel creates problem for flashing.

Galaxy

How to fix a galaxy j1 SM-j100h hard brick

Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.

I tryed many solution but no one work, please if someone have the some problem tell me.

Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app

i'm working on this problem..
i resolved,
share there

OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.

same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???

caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.

xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it

guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?

i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..

im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance

Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:

Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.

Help
I have same problem,hard brick.Can anyone help?

somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:

kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66

If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...

xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.

same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.

J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help

how to unbcrick note 4 exynos from hardbrick

before my note 4 is hardbricked it reboot itself and stop at downloading mode . after that i can't swich on the phone and i try to put at download mode but it can't (no result) . and when i put it to the pc with usb cable , the peripheral is named qhsub bullk.
so i search solutions i find the usb jib whitch is not available for me .
so what is the solution to unbrick the note 4?

nounou2016 said:
before my note 4 is hardbricked it reboot itself and stop at downloading mode . after that i can't swich on the phone and i try to put at download mode but it can't (no result) . and when i put it to the pc with usb cable , the peripheral is named qhsub bullk.
so i search solutions i find the usb jib whitch is not available for me .
so what is the solution to unbrick the note 4?
Click to expand...
Click to collapse
I think qhsusb_bulk is shown for a Qualcomm processor, are you sure you have a exynos variant?
What is your model number?
Reporting Via N910G

it is the model n910f . i check it from the website imei.info i entred the imei in the website i found in the phone information ,
chipset :exynos 5433. so please, if there is a solution to unbrick this phone

nounou2016 said:
it is the model n910f . i check it from the website imei.info i entred the imei in the website i found in the phone information ,
chipset :exynos 5433. so please, if there is a solution to unbrick this phone
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3488114
Reporting Via N910G

Hard bricked note 4 sm-n910g death, qualcomm mode. Tried everything... help me

My note 4 dead while flashing with odin. No charging, no download mode, no response completely dead?. tried usb jig, Unbrick image everything. but no luck, nothing worked. No warranty for my mobile. It is Detected as Qualcomm HS_USB QDLoader 9008 in system ports. QFIL tool detects this but need 3 files. prog_emmc_firehose_xx.mbn , rawprogram0xml, and path0.xml. i googled it but no files for note 4. i believe QFIL tool bring back to life my device. Please help me to fix this.

Sudheerdarling said:
My note 4 dead while flashing with odin. No charging, no download mode, no response completely dead?. tried usb jig, Debrick image everything. but no luck, nothing worked. No warranty for my mobile. It is Detected as Qualcomm HS_USB QDLoader 9008 in system ports. QFIL tool detects this but need 3 files. prog_emmc_firehose_xx.mbn , rawprogram0xml, and path0.xml. i googled it but no files for note 4. i believe QFIL tool bring back to life my device. Please help me to fix this.
Click to expand...
Click to collapse
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Sent from my SM-N920G using Tapatalk

yashthemw said:
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Sent from my SM-N920G using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, all ready i tried. but no luck . after a whole night freezing, followed everything as you sad, flashed image file in SDHC memory. tried to power on many times in different ways as per instructions. but not even vibrate. no power on. is any different method here?

Sudheerdarling said:
Thanks for your reply, all ready i tried. but no luck . after a whole night freezing, followed everything as you sad, flashed image file in SDHC memory. tried to power on many times in different ways as per instructions. but not even vibrate. no power on. is any different method here?
Click to expand...
Click to collapse
Hi Sudheer,
hav u fixed ur mobile ?
if yes tell me how i will giv a try...
mine is a N910G India model....i hav tried all the methods but unsuccessful...kindly help

SAME here same problem / u fixed it ?

is your phone stuck in qualcomm mode or are u trying to get into it?
what was the last thing you were doing or what was the cause of the fail?