my galaxy s i9000 wont start up .i start the phone and stucks on at&t screen i install before one click lag for captivete anybody please help me
your in the wrong thread here, anyway, can u get download mode working ?
no i cant do the 3 button combo its not working. and if i put the phone to the computer be usb cable my computer dosnt find it
Then there are two last resorts:
- see this post http://forum.xda-developers.com/showthread.php?t=819551&highlight=usb+jig
- bring your phone to a Samsung repair centre
i think you need to go to repairing center r if you have ufs box flash your phone with box
and i think there is no other way
regards
Should have posted in general. Anyways if you can't get into download mode the only way is to make a usb jig, or buy one from ebay.
And should have posted in Captivate.
thanks very much it works with the jig i get to download mode but now what i need to install?helpp
http://forum.xda-developers.com/showthread.php?t=882014
Block 2 ODIN method .
http://forum.xda-developers.com/showthread.php?t=818556
jje
Related
So, I think my phone is a bit bricked at the moment, I have this image of a phone, an exclamation mark, then a computer connected by a row of dots. I can't use links because I'm a new forum member, but you can see an actual picture of this image on the "[STOCK ROM] Odin3 One-Click Downloader" thread by Darkstrider.
I can still get into "download mode" using the keypress and Odin still picks up the device on the COM port.
It had this firmware before I tried flashing it (16Gb model locked to the Three UK network):-
PDA: I9000NEJG2
PHONE: I9000NEJG1
CSC: I9000HCGJF2
The steps leading up to the bricking:-
I was firstly trying to follow the instructions on Darkstriker's 2nd post from his topic " [REF] BIG FAQ Thread! {Flash/Root HOWTO} {ADB&Tutorials} {T&T} [READ BEFORE POSTING!]"
So I got JG5 firmware from a link on the Modaco forums (from the " 22/Jul r3 (JG5) - MoDaCo Custom ROM for Samsung Galaxy S with Online Kitchen" topic, the ROM was hosted on coblitz.codeen.org.
Installed the "usb_drivers_GalaxyS_x64.zip" drivers from the "USB Driver for Galaxy S and Misc Info" (xda forums) topic. Windows XP picked up and used the drivers in the extracted "03_Swallowtail" folder. It added "Samsung Mobile Modem" and "SAMSUNG USB Composite Device" to Device Manager.
So, I did everything on Darkstriker's guide, added the .pit file, chose the "re-partition" option because I was flashing to JG5. The process got stuck on "File analysis..", waited 20-30mins and it didn't move from this status.
Didn't work, so then I tried some different drivers, I googled and found "I9000_USB_driver.rar" on hotfile.
This time Odin got to the "Do not turn off target!!" status and it didn't move for around 20-30mins.
Restarted my computer, detached and reattached the USB cable, I decided to not use the re-partition option and try again, the status got to "factoryfs.rfs", this time the phone display went blank, which didn't happen before, but again it seemed stuck, nothing happened after waiting 20-30mins. So I aborted and closed Odin.
At this point I just wanted to use the phone to make a call when I notice the image/symbol above that I described at the beginning of this post. Help!
What's the best way to fix this? I spent nearly 2-3hrs trying to flash my phone and now it's half dead! I've nearly run out of mental stamina, but will give it a fresh attack today/tomorrow if someone can offer some suggestions.
Was thinking about trying the "fix" on the "[STOCK ROM] Odin3 One-Click Downloader" topic but not sure if it is only for the Captivate.
Hope you guys can help me out
All I wanted to do was to put the "(ROM Galaxy Europe) Doc's StockRomMod V2 (XWJG5)(deoxed) 30/07/10" ROM on my device, and add the JIT compiler and Flash 10.1 player if possible
Go read the guides from the development area.
It's just too easy and you're making it overcomplicated to yourself.
If you have the connect to pc error logo.. remove battery and then proceed.
1. if you installed kies ever, you already have the needed drivers.
2. start odin and select correct files (pit,code,modem,csc in respective order)
3. put phone in download mode (home + volume down + power)(hold long enough)
4. plug it to computer (odin should say "added")
5. press start (in less than 5 mins you phone should restart and go into special mode where it does some magic and reboot again and your done).
My god Buddy, you are right, I was overcomplicating things, I did it in the exact order you said and now I'm getting the progress bar for the first time.
I'm feeling optomistic now! Thanks dude!
It worked! If I was gay I'd kiss you on the lips! Thanks again buddy, it was stupidly simple after all.
Tundraswan
Glad your issue is resolved... just feel warm and cosy knowing that its not possible to brick your Galaxy S.
HELP!!!!
twisted_mind said:
Tundraswan
Glad your issue is resolved... just feel warm and cosy knowing that its not possible to brick your Galaxy S.
Click to expand...
Click to collapse
Really? I can't get my Captivate to even boot up...........no signs of life.........HELP!!!!!!!!!!!!
Stupid me: I pulled the USB cable and cancelled a ROM update (that was mid way) with Odin because i realized the SIM and SD card were still in the phone....so i pulled it to remove those and now NOTHING>>>>
Please help, following the instructions and it won't go back into download mode. Is there any other way?
Hello !
Where do i find those files for PIT , PHONE , PDA and CSC ?
i have i9000 galaxy s Problem solved , i already repaired my phone
These forums are for the Samsung Galaxy S i9000, you want to go here...
http://forum.xda-developers.com/forumdisplay.php?f=703
the galaxy s gt 1900 screen
Hi,
after a fail at rooten my device my phone keeps hanging on the galaxy s I900 screen for about 20 sec and then it turns it self off and on. He will repeat this until he runs out off juice.
this topic was usefull.. because the hole odin set up worked. But because of the turning off and on he cant complete the hole progress.
can anyone help me?
buddy01 said:
Go read the guides from the development area.
It's just too easy and you're making it overcomplicated to yourself.
If you have the connect to pc error logo.. remove battery and then proceed.
1. if you installed kies ever, you already have the needed drivers.
2. start odin and select correct files (pit,code,modem,csc in respective order)
3. put phone in download mode (home + volume down + power)(hold long enough)
4. plug it to computer (odin should say "added")
5. press start (in less than 5 mins you phone should restart and go into special mode where it does some magic and reboot again and your done).
Click to expand...
Click to collapse
I may have bricked mine too. Can anyone tell me where i would be able to get these files please? Thanks in advance!
fieldop said:
I may have bricked mine too. Can anyone tell me where i would be able to get these files please? Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=846913 that has all stock roms.. just choose the one u need and job done !! That is providing you can get into download mode ???
If you cant get into download mode, theres a clever little tool you can make to force the phone into download mode.. http://forum.xda-developers.com/showthread.php?t=819551
Good luck
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=846913 that has all stock roms.. just choose the one u need and job done !! That is providing you can get into download mode ???
If you cant get into download mode, theres a clever little tool you can make to force the phone into download mode.. http://forum.xda-developers.com/showthread.php?t=819551
Good luck
Click to expand...
Click to collapse
Thanks soo much!! Done it! =)
Hi, i have semi bricked my galaxy s which is from the african region, but purchased in dubai. i've managed to cut open a micro usb jack and i can clearly see the pins i need to use, my question is, does the resistor value have to be exactly 301k or it can vary up or down slightly. also instead of using 3 100k resistors can i add up other values as well to make it close to 301k? sorry im noob at this stuff atm but i find such hacking very intriguing. also when i tried it with the resistors that add up to 300k, i join them to pins 4 and 5 with the phone switched off, after 5 seconds it shows the same thing 'phone ! pc'. by which i know all hope is not lost yet.
6stringster said:
Hi, i have semi bricked my galaxy s which is from the african region, but purchased in dubai. i've managed to cut open a micro usb jack and i can clearly see the pins i need to use, my question is, does the resistor value have to be exactly 301k or it can vary up or down slightly. also instead of using 3 100k resistors can i add up other values as well to make it close to 301k? sorry im noob at this stuff atm but i find such hacking very intriguing. also when i tried it with the resistors that add up to 300k, i join them to pins 4 and 5 with the phone switched off, after 5 seconds it shows the same thing 'phone ! pc'. by which i know all hope is not lost yet.
Click to expand...
Click to collapse
I did 300k and it worked. 3 x 100k ohm resitors.
Solder just one pin and leave one pin loose.
Connect that micro usb when phone is shut down.
Touch with that loose end to that pin which you did not solder. 4 or 5.
Keep it pressed until phone goes to the download mode.
You can try my jm8 guide.
Section B is for flashing stock 2.1, to get a fresh clean install.
Hello - I urgently need help with my Samsung Galaxy Tab.
I flashed a wrong PIT/PDA & what happened is:
- my Galaxy Tab does not reboot at all
- the flashlight in the back suddenly switched ON automatically
No matter how long I press the Power Button, the device switches off just for one second, and then the flashlight switches ON again - but no reboot.
I cannot get into download mode / when I try to use commands with Odin, it only says: error: device not found.
Odin does show my device ([COM:4]), it appears as: Added // only the download mode does not work!
When I tried to start SuperOneClick, trying to Unroot, it is stuck with: "Waiting for device"
Weirdly, though, my netbook does install the drivers automatically when I plug it in. Which means, my netbook can "read" the device.
Does anyone here know how I could make the extreme Hard Reset, without having to reboot?
--------------------------
If you think this post should rather go to the Developers section, please feel free to move it // I am thankful for any help
Have you tried connecting to it with ADB to see if you can reach it at this level (apart from with SuperOneClick)? Try installing the Droid Explorer application on your Windows PC and see if it will recognise your Tab. If it will you should be able to initiate a reset from the Droid Explorer UI. If it won't I would suggest that you are hard bricked and it will have to visit Samsung. Good luck!
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
QueenAmy said:
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
Click to expand...
Click to collapse
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
rotohammer said:
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
Click to expand...
Click to collapse
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
bdl1969 said:
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
Click to expand...
Click to collapse
lol, I'll get my cheap Chinese Tab cables this week and hack one up to test.
My guess is that Odin will only see the Tab when it is in download mode. Id try flashing it in that state and find out for sure. It sure cant hurt.
You went to your retailer?I have exactly the same problem!!
First of all - THANK YOU for having started this discussion.
Yes, I went to the retailer. My Galaxy Tab is with Samsung Technical Support now; will keep you posted.
To answer some earlier questions, yes ODIN did recognize my Tab; but the screen on the Tab remained totally black. Only this strange "flash" light on the back kept glowing.
rotohammer, if you really get to test what you mentioned before, I'd be interested to hear what happened - but, personally I would not recommend it, unless you are sure you want to risk completely ruining your dear Tab.
studio54 said:
You went to your retailer?I have exactly the same problem!!
Click to expand...
Click to collapse
I did ... and less than 2 weeks later ..
Update:
13-Jan-2011
Today noon I got a call from my retailer my Galaxy Tab was ready to be picked up & I was really lucky: my retailer said the repair would normally cost EUR 650.-
.. as I had damaged the whole mainboard ..
but as the Tab was less than 1 month old, they were so kind to do it w/in my warranty - so I did not have to pay for it.
I'm very relieved, as you can imagine.
Got my Galaxy Tab back with a brand-new mainboard, everything is working well &
I sure learned my lesson.
I will not flash the Galaxy Tab again.
Only because Galaxy Tab and Galaxy i9000 are both on Froyo, it does NOT mean that you can flash the same software!
I wanted to apply the 3 button combo fix on my Galaxy Tab but apparently it does not work!
Bricked mine as well, but mine is a weird case
I bring up the weirdest case of bricking so far, i was on an official Arabic (P1000JPJK2)Firmware, and i noticed a new Arabic release on SamsungFirmware.com (P1000JPJM3) i downloaded it and downloaded the .pit file, Started Odin v1.7 and unchecked repartition, selected the PDA and the pit and started the processes, odin finished and Reseted the device and give me the green light with the word PASS, however, the my p1000 decided to reboot into download mode automatically, so i rebooted the device manually and got stock in the Samsung Logo and keeps looping. so i decided to go back to my previous Rom but it will always fail and i would have to reboot my tab and it will show the good ol' Phon-PC logos, however, odin would see it and would flash anything i want. i tried flashing various versions of rom's but they would all fail... i tried repartition checked and unchecked and nothing worked, so lastly i decided to flash the .pit file alone and that worked and got me back to where i was stuck in the Samsung logo loop and no ROM would be flashed through Odin BUT the (P1000JPJM3) but it still will not boot! and funny enough i took it to sammy's repair shop and they told me to come pick it up in a few hours but they told me that they failed to repair it and they would need to keep it till tomorrow, but they guy was not that optimistic about getting it repaired and to make things worse i couldn't get unrooted so there is a good chance that there will be no warranty... does this mean that i bricked it for good? please help me.
Ok so, where do I start. My sister decided she wants a custom ROM on her galaxy s. So I rooted it, and after much trying, discovered that I could not get into download mode. So I flashed through ODIN, believing that I had now fixed the problem. I then went along, used ADB to get into download mode, installed clockworkmod, and tried to flash CM7. This is where things went pear shaped, the phone will now not do anything, If I switch it on, i just get the black and white galaxy s screen, and nothing else. I cant get into download mode with the 3 button combo, and if i connect it to the USB it does not connect to the PC in any way, is it completely bricked? Or is there some magical way to fix it???
Thanks hope I get some help
UPDATE: I made a USB Jig and it worked perfectly! The phone is all good now thanks everyone. This thread can be deleted if needs be!
I guess you need to buy or make a USB JIG!
http://forum.xda-developers.com/showthread.php?t=819551
edit: You can also try removing the battery for 1 minute, hold power, vol. down and home key and then put the battery in.
Buy/Make a USB Jig
When uve got ur Jig - Remove Battery - Reinsert Battery - put Jig in - Don't Touch any Buttons - When Download Modes comes up remove Jig - Flash With a Stock Rom From samfirmware
the USB Jig Will Force the Phone into Download Mode
ok ya, i know about the USb jig, only thing is, any idea where I can get one in South Africa? lol, my soldering skills are not up to scratch?
Chiller89 said:
ok ya, i know about the USb jig, only thing is, any idea where I can get one in South Africa? lol, my soldering skills are not up to scratch?
Click to expand...
Click to collapse
Well.. ebay?
There are many "technical support shops" where you can drop your phone and they will re-flash it for free (as long as you have the bill). They have their own "usb jig".
What about recovery mode (hold power, vol. up and home key) ?
Also retry to get into dl mode several times...it might not have worked the first time...good luck for you..
got one from ebay
look for "Fix Download Mode USB Jig Samsung Galaxy S"
it worked like a charm
Try this.
Glad it worked for you.
A quick question about where you bought the jig bits?
Chiller89 said:
UPDATE: I made a USB Jig and it worked perfectly! The phone is all good now thanks everyone. This thread can be deleted if needs be!
Click to expand...
Click to collapse
hi, I just wanted to know how easy it was to find the parts for making the jig, I'm based in Johannesburg and am looking to make a jig for my Galaxy S2 to clear kernel counts and the Exclamation triangle.
Any help would be great thanks.
Im unsure as to whether my Galaxy S is completely bricked.
My Galaxy S is stuck on a screen displaying - Phone ! Computer
I can't access download mode by the 3-button combo or by the USB jig.
Is there any way I can either boot the phone or get to download mode so i can flash with odin.
PS - I got to this stage by accidentally unplugging the device when flashing firmware in odin.
probably the answer is no im afraid if 3 combo AND USB jig isn't working...
Take the battery out for 10-15 min then place the battery and try Download Mode or the USB-JIG and see if get's to Download Mode.
Find someone with a riff box ... if your in the uk inbox me
Sent from my xxx using Tapatalk .
A friend of mine had a similar problem but the phone didn't show anything on the screen, I told him to do the button combo for donwload mode hold them for 10sec and connect it to the pc with odin open and it just work btw the screen wasn't showing download but it was, give it a try who knows
Sent from my GT-I9000 using xda premium
Now that my phones dead i have almost no way to access the internet so im sorry for the late reply
I'll try all these methods tonight when i get home from work.
Thanks everyone for your thoughts.
And btw I am in the UK, although I have no idea what a riff box is lol
A riff box is a box that fixes dead phones try asking your towns unlocking shop if thay have one if not inbox me and I'll run though the best way of getting your phone fixed
Sent from my xxx using Tapatalk.
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
xhizors111 said:
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
Click to expand...
Click to collapse
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Is is still repairable
Bruce Wayne said:
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Click to expand...
Click to collapse
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
xhizors111 said:
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
Click to expand...
Click to collapse
Yes, offcouse.
Just let them be unaware of you knowing about root/cwm etc. just act dumb. If they get to know your warranty is already void, they will charge you money for repairing it.
Follow what bruce says..
Tell them u got an update in kies nd this happened
** rooting is new for me,
nd i am a noob to root....**
They said Board is damaged
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Please anyone!!
or do refer any book!
xhizors111 said:
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Click to expand...
Click to collapse
The last 'n' only hope left is this:-
Install ur phone specific driver on pc.
1. Take out battery, sim & sd card.
2. Open odin.exe on pc.
3. After this, connect the phone via USB cable to PC(yes! without battery,sim & sd card)
4. Press the download mode combo keys.
5. While keep pressing all those keys, insert the battery now.
6. Now, odin should detect ur phone so that u may get it updated with stock firmware.
And if this also doesn't work, then bro u might have lost it at all
Sent Via XDA™ Premium