Database Users

N10 - 16GB - Volume buttons & Screenshot capture

Just received my N10 - 16GB and was trying to figure out how to take a screenshot. From everything I read it's, Hold Power Button + Vol Down. That didn't work. It was just as if I held down the Power Button by itself and it gave me the popup window for Power Off / Airplane Mode.
I then realized that the Vol Down is actually in the top position, closest to the Sleep/Power and Vol up is in the bottom. Is this normal? I don't recall the Nexus 7 having the volume buttons reversed.
Also, trying to take a screen shot still doesn't work for me. Anyone having these issues?
Thanks,

The tablet is designed for landscape use.....so at the top left of the tablet is Power, Volume - and then Volume +
Press and HOLD both Power and Volume - at the same time, it takes a few seconds (about 2.5 seconds based on doing it right now and counting LOL).
Do not press one then the other. Put your fingers over both then press at the same time.

tcrews said:
The tablet is designed for landscape use.....so at the top left of the tablet is Power, Volume - and then Volume +
Press and HOLD both Power and Volume - at the same time, it takes a few seconds (about 2.5 seconds based on doing it right now and counting LOL).
Do not press one then the other. Put your fingers over both then press at the same time.
Click to expand...
Click to collapse
Much appreciated the quick answer. From my other Android devices, it was either hold power/sleep first then either Vol down or Home button. I tried your suggestion and it works now. Even gives an audible tone.

Anybody else find this really awkward?
It'd be much better if I could do a screenshot by holding the power button down and tapping the home button. Much like the One X etc.

[L5] Foolproof boot to recovery

Yesterday I had a hard time trying to boot an L5 (612) to recovery; there are many instructions out there that I was never able to make work, like this one, for example:
Press and hold the Volume down key + Power key, after 2 seconds when the lights go on you have to press 2 seconds on the home button
Click to expand...
Click to collapse
So, the best instructions I found were on this thread:
turn your device off, then press volume"-" + home button + power button until it vibrates and shows LG logo then release only power button and keep pressing both of the others for about 8 seconds then release.
Click to expand...
Click to collapse
And the method I found out worked best after some trial and error (and lots of googling):
Power off
Press and hold (Volume down) + (Home) keep holding
Press and hold (Power) and release it (Power) after the phone vibrates.
Keep holding (Volume down) + (Home)
Let about 8 seconds pass and then release (Home). Keep holding (Volume down)
Keep holding (Volume down) until the phone enters recovery
For me, works every time.

I heard about another:
Hold VOL-, HOME and POWER
When it vibrates, hold only HOME
Hold it until recovery shows up
???
PROFIT!

Enter recovery mode EastCome Car DVD for Seat Ibiza

Hello,
Is there anyone who can help me? I have a total android crash in my Seat Ibiza Android 6.0.1 Car DVD (2GB ram, 32GB, Octacore)
I need to know how to acces android recovery mode, i tried a lot of button combinations but can't find it.
The Chinese seller doesn't react at all to my question, so i hope anyone here can give me the perfect key combination.
The password of factory settings is 126 i know that, but i can't enter the screen because of total android crash.
Greetings and tank you already,
Joa Wah

JoaWah said:
Hello,
Is there anyone who can help me? I have a total android crash in my Seat Ibiza Android 6.0.1 Car DVD (2GB ram, 32GB, Octacore)
I need to know how to acces android recovery mode, i tried a lot of button combinations but can't find question ... the perfect key combination.
The password of factory settings is 126 ...
Click to expand...
Click to collapse
Found it:
Long press volume/power (is one knob) button, press reset with pen or paperclip keep both for 5 seconds. Then release reset, hold volume/power button 1 second longer. Release volume/power button and push it short again. Now unit boots to recovery mode.
Short press to go to item of your choice, long press to select.

JoaWah said:
Found it:
Longpress volume button, press reset with pen or paperclip keep both for 5 seconds. Then release reset, hold power button 1 second longer. Release power button and push it short again. Now unit boots to recovery mode.
Short press to go to item of your choice, long press to select.
Click to expand...
Click to collapse
- volume up or down?, hold this and then press reset for 5 seconds, release reset while still holding volume up or down and where does the power button suddenly come into play? could you make a quick video of it because this doesnt seem right

Sky-High said:
- volume up or down?, hold this and then press reset for 5 seconds, release reset while still holding volume up or down and where does the power button suddenly come into play? could you make a quick video of it because this doesnt seem right
Click to expand...
Click to collapse
Your right, volume button en powerbutton are the same button, its power and volume button in one. I will edit my post.
A video is at this moment not possible.

i dont use hard reset

i am triying them
• Press and hold Power Button + Volume Down
• When the LG logo shows up, release the power button only
• Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
• When the factory reset screen appears, release your hold on all buttons
tablet shuts down every time
i watch video i use on video but tablet shuts down every time
my tablets not open

Hulu Post 8.0

We wanted one remote to be able to turn on/off the TV, change inputs and volume, and control the Shield. Never had a problem until the 8.0 upgrade, now the "Enter" button is not accepted by the Hulu app. The arrow buttons work, the Enter button works in other apps, and Hulu accepts Enter from the NVIDIA remote, but for some reason Hulu does not like the Enter button on this particular remote.
This is what we're using:
https://www.amazon.com/gp/product/B01CL3ZXGO/
IR setup is:
Power -> TV Power
Red -> TV Input
Yellow -> TV Volume Down
Blue -> TV Volume Up
The other buttons are non-IR and talk to the Shield.
I found an app that can remap the enter button for a price, but I was wondering if there are any free solutions available? In my opinion this is a bug, and I don't want to pay if Hulu is going to fix the bug.

If u press the home button and the back button together the tv is gone off with the shield same time u most have to setup your tv to be control with shiel remote