i brought No 1 D5 Watch after few days it restart autometic and get stuck on Boot Loop restart logo Appear than auto Restart and it is continue i buy this from aliespress and from my country i am unable to send it back due to electronic custom Issue .
i try to reflash it but still same problem any help please .
Same problem here with X3 watch (same as No.1 D5). Continues bootloop, no matter what buttons pushing, I cannot get into recovery mode to make a factory reset. Also ADB not connecting to the watch (USB debugging not enabled in watch?)..... Reflashing software did not help, still in bootloop. Disconnecting battery did not help either.
I'm at the end of my possibilities. Anyone has some suggestions what I can try next?
Watch skin problem
Hi, i am sorry i need some one help here, i got my No.1 D5, and i was trying to add watch face from inside the watch using the (+), i chose the one i want, download start and installing message confirmation is ok, then a black one (nothing there) added to the faces list, when i chose it there is only black screen, touch swip is not working, long press the btn show the normal options, i can power off and power on, but gain once powered on the face is black.
thanks in advance
No.1 D5 black screen
Hi,
I have the same problem. Do you have any solution?
Thx!
s_alish said:
Hi, i am sorry i need some one help here, i got my No.1 D5, and i was trying to add watch face from inside the watch using the (+), i chose the one i want, download start and installing message confirmation is ok, then a black one (nothing there) added to the faces list, when i chose it there is only black screen, touch swip is not working, long press the btn show the normal options, i can power off and power on, but gain once powered on the face is black.
thanks in advance
Click to expand...
Click to collapse
Cicconia said:
Hi,
I have the same problem. Do you have any solution?
Thx!
Click to expand...
Click to collapse
have you guys ever figured it out? same problem here
Related
Hi guys,
I have a problem with my HD Mini. I searched for it, but I didn´t find help. If the same problem is solved in another thread, please post the link.
When my device is in slepp mode (screen black) and I want to wake up (press on/off button) nothing happens. The only way to use the device is to remove the battery and turn it on again.
Sometimes I can wake up the device normaly (press on/off button -> slide bar down -> everything is normal), but only in 2 of 10 cases.
The device is running in sleepmode normaly, I can recieve messages, it vibrates and the green light flashs.
I tryed to fix it by an hard reset, but that didnt help.
I hope anyone knows how to fix it.
Daphoz said:
Hi guys,
I have a problem with my HD Mini. I searched for it, but I didn´t find help. If the same problem is solved in another thread, please post the link.
When my device is in slepp mode (screen black) and I want to wake up (press on/off button) nothing happens. The only way to use the device is to remove the battery and turn it on again.
Sometimes I can wake up the device normaly (press on/off button -> slide bar down -> everything is normal), but only in 2 of 10 cases.
The device is running in sleepmode normaly, I can recieve messages, it vibrates and the green light flashs.
I tryed to fix it by an hard reset, but that didnt help.
I hope anyone knows how to fix it.
Click to expand...
Click to collapse
hi
try searching for 'sleep of death' or SOD there is a thread on it somewhere
the problem is winmo related i think and not just our mini's are affected
hope this helps
Daphoz said:
Hi guys,
I have a problem with my HD Mini. I searched for it, but I didn´t find help. If the same problem is solved in another thread, please post the link.
When my device is in slepp mode (screen black) and I want to wake up (press on/off button) nothing happens. The only way to use the device is to remove the battery and turn it on again.
Sometimes I can wake up the device normaly (press on/off button -> slide bar down -> everything is normal), but only in 2 of 10 cases.
The device is running in sleepmode normaly, I can recieve messages, it vibrates and the green light flashs.
I tryed to fix it by an hard reset, but that didnt help.
I hope anyone knows how to fix it.
Click to expand...
Click to collapse
Same here, a hard reset didn't help, I mean problem comes out also with a clean installation. You can only remove battery or wait for someone to call/sms you..
Thanks... I have searched it, but it seems like there is no real solution to this problem.
but i´ve read somewhere, that if you put yout device to sleep when its in shortcut-homescreen (9 shortcuts), there is no SOD. It seems to work.
if anyone got an better solution...
try to flash ur rom, it looks like the device bricks.
http://forum.xda-developers.com/showthread.php?t=1041988
OK, thanks for all your help.
Since wednesday evening my HD mini is ok. I can´t say how I solved the problems, I made a few hardresets and suddenly it works fine. Now I test some things step by step to look whether I can find the reason. At the moment I guess it´s something with the sd card...
If I will find something I will tell you, perhaps its helpfull.
ok, here some news.
since my last post my device worked well. today I tried to put in my sd-card and I formated it with the HD-mini internal formating tool.
after 5minutes i got the good old SOD, now I turned the card out again restartet the device and everything is all right again.
Hi xda-members,
i´ve got an problem.
I replaced the Digitizer of my Phone and wanted to turn it oon.
Now the digitizer stays white but the touch works.
I can't see the window to type my PIN.
Can you help me to fix that problem?
sincerely lucky93
Lucky93 said:
Hi xda-members,
i´ve got an problem.
I replaced the Digitizer of my Phone and wanted to turn it oon.
Now the digitizer stays white but the touch works.
I can't see the window to type my PIN.
Can you help me to fix that problem?
sincerely lucky93
Click to expand...
Click to collapse
So far as i know is that sometimes the phone just doesn't want to accept the new display and then you gotta perform a soft reset so that old data maybe also related to the display are getting removed and that the phone Might accept the part then. In most cases this works like that hope that it works by you too. if you cant see the window to type your pin then try to find a video or a image from the lockscreen and enter your pin. Maybe you can do it if you can blind remember how it looked like:good:
wulsic said:
So far as i know is that sometimes the phone just doesn't want to accept the new display and then you gotta perform a soft reset so that old data maybe also related to the display are getting removed and that the phone Might accept the part then. In most cases this works like that hope that it works by you too. if you cant see the window to type your pin then try to find a video or a image from the lockscreen and enter your pin. Maybe you can do it if you can blind remember how it looked like:good:
Click to expand...
Click to collapse
How can i do soft reset, i got a custom rom on it.
Lucky93 said:
How can i do soft reset, i got a custom rom on it.
Click to expand...
Click to collapse
Press and hold Power Button (around 5 seconds).
Your device will now shut down and reboot.
Alternate Method; With your device turned off…
Press and hold Power Button until the LG Logo appears then release
wulsic said:
Press and hold Power Button (around 5 seconds).
Your device will now shut down and reboot.
Alternate Method; With your device turned off…
Press and hold Power Button until the LG Logo appears then release
Click to expand...
Click to collapse
I see only the white display, no lg logo or anything, thats my problem
Lucky93 said:
I see only the white display, no lg logo or anything, thats my problem
Click to expand...
Click to collapse
Yeah i know but this should be an fix which also worked on other phones so:silly: did you tryed it already? maybe multiple times. It still seems to me like a software issue.
wulsic said:
Yeah i know but this should be an fix which also worked on other phones so:silly: did you tryed it already? maybe multiple times. It still seems to me like a software issue.
Click to expand...
Click to collapse
I clicked the button for 5 seconds. It does nothing,
i have to go to TWRP Mode to do a software reset.
I tryed to fix that problem by charging my phone, Now its fully charged and the display doesnt work now.
How can i do a software reset without a working display?
Is there any method by usb and computer?
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Crazeh said:
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Click to expand...
Click to collapse
I think you can boot to download mode or revovery. The LED notifi and backlight buttons won't turn on if you boot to download mode or recovery.
Just try to boot to...
1. download mode. Just press and hold for 2-3 seconds power + home + volume down
2. then wait 3 seconds. After that press volume up.
3. Connect your phone to pc, open odin and check if a device is connected.
4. If a device was found by odin - flash a ROM (stock or something else) and hope that this will fix the black screen problem.
Good luck!!
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Anyone has any ideas ?
So what all i tried is
Remove battery, hold power button for 1-2 mins, let phone for few mins and turn it on. didn't work
I tried with adb,but usb debugging not on so cmd cant find my device
Only thing left i guess if someone has idea how to get in download mode in some other way or some program that doesnt reguire download mode but can flash rom and etc.
@Crazeh
Take it back to the nearest service center and act the dumb ("I don't know what is wrong with it")
I have done that many times
They are prob gonna call me and tell me to pay for fix
No one has any idea what else should i try ?
try link2sd app form play store. it has the option to boot to download mode. I think titanium backup has the feature also.
My screen is black so i can't do anything on it.....
try to disable ambient screen. report if problem persist
How should i disable ambient screen ? While i can't see anything on phone cause of black screen ?thanks for reply Rox
Anyone?
Crazeh said:
Anyone?
Click to expand...
Click to collapse
ok so i think your problem isn't due to any rom but hardware problem
power off your phone remove the back , look on the left you see a little trap , open it , now you see connector it is the one of the screen try to see if you can disconnect and reconnect it
power on your phone and see if it work :fingers-crossed:
Where is that little trap?
btw if i do this will i loose my warranty completely ?
Crazeh said:
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Click to expand...
Click to collapse
If Odin recognizes it, it means it's in Download mode. The device has different interaction with the host over USB when it's not in Download mode.
I don't see the screenshot of the failure. It may be that something got broken in your hardware, so the flashing fails. There's a known issue with the S3 called "Sudden death syndrome", I don't know if it applies also to the S3 Neo, where some of the memory of the ROM fails suddenly. If that is the case (I'm not saying it is, but it might be), there's no fix other than replacing the hardware.
Odin doesnt go over setup connection. cant post screenshot bc im new to the site. btw im sure the phone is on but recognized in odin...
Question 1. This just happened right now my s5 is starting up and sometimes it shows the s5 startup powered by android sometimes not after that it proceeds in starting up with the usual sound effects but the problem is the screen is just plain black. Now i believe my phone is proceeding to the homescreen cause i tried to ring it and it did plus my ringtone music played. I tried pulling the battery multiple times and start the phone but still same result. I also tried the taking the battery off and pressing the power button for a minute. also tried the safe mode, but none of them worked. What do you think? is it a firmware or a hardware issue?
Question 2. Im still not sure the cause of the problem. Because of the black screen issue i I wanted to backup my files saved in the phones memory. However my phone is locked through my fingerprint and I guess because of that when I connect my phone to the pc im unable to access my files. Is there anyway I can access my files through a pc and unlock it using my phone's fingerprint alternative password?
TIA
If the initial logo sometimes won't show up, it sounds more like hardware as that is not part of the ROM
If your phone is secured by fingerprint, wait for it to boot, press the home or power key to wake it up, then swipe like normal, if it's just a faulty screen, the fingerprint swipe should still work
*Detection* said:
If the initial logo sometimes won't show up, it sounds more like hardware as that is not part of the ROM
If your phone is secured by fingerprint, wait for it to boot, press the home or power key to wake it up, then swipe like normal, if it's just a faulty screen, the fingerprint swipe should still work
Click to expand...
Click to collapse
hey thanks alot swiping the through the black screen unlocked my phone. so do you think it is a hardware issue I assume its the LCD?
but if ever the LCD is broken , the finger scanner should also not be functional? or im wrong?
The finger scanner is a separate button (Home button)
There are two parts to the screen iirc, the digitizer (Touch) and the panel itself for displaying, could be just the panel if the digitizer is still working
You can use this to control your phone without a screen, might help
http://forum.xda-developers.com/showthread.php?t=2786395
i'm experiencing the same problem again. Before I guess after 40-50 restart I was able to open my s5 with a screen, but now it happened again and the difference is that when I boot it the "Samsung s5 powered by android" rarely shows and it will proceed until the home screen with a black screen?
i have already removed the battery, charged it, changed battery, boot it in recovery and safe mode but still all i'm getting is a black screen.
Any idea how to fix this? Is this a hardware issue already
kenchii17 said:
i'm experiencing the same problem again. Before I guess after 40-50 restart I was able to open my s5 with a screen, but now it happened again and the difference is that when I boot it the "Samsung s5 powered by android" rarely shows and it will proceed until the home screen with a black screen?
i have already removed the battery, charged it, changed battery, boot it in recovery and safe mode but still all i'm getting is a black screen.
Any idea how to fix this? Is this a hardware issue already
Click to expand...
Click to collapse
Hi kenchii17
As you didn't provide answer to @*Detection* 's suggestion for backup, here comes another:
[TOOL] Tickle My Android
To get rid of all this inconvenience, I would suggest a complete reinstall. Clear everything through Recovery and then flash a new Stock ROM via ODIN.
Nice regards.
.
Hi everybody,
For months i can't turn on my watch. I've tried everything : let her charging, push the "on" button during a moment etc.
When I connect it to my computer I can hear the sound of the connection but 2sec later the watch is deconnected, 2 sec later the watch is re-connected, 2sec later deconnected etc etc etc etc.
I don't know what to do, can somedy help me please ?
(I apologize for my bad english, i'm from france)
Maybe best to tell people what you have done to your watch?
Sent from my BLA-L29 using Tapatalk
pablo11 said:
Maybe best to tell people what you have done to your watch?
Sent from my BLA-L29 using Tapatalk
Click to expand...
Click to collapse
I didn't do anything special with the watch.
elliot.poc said:
Hi everybody,
For months i can't turn on my watch. I've tried everything : let her charging, push the "on" button during a moment etc.
When I connect it to my computer I can hear the sound of the connection but 2sec later the watch is deconnected, 2 sec later the watch is re-connected, 2sec later deconnected etc etc etc etc.
I don't know what to do, can somedy help me please ?
(I apologize for my bad english, i'm from france)
Click to expand...
Click to collapse
Please try to booting into bloader mode by press and holding both buttons.
TipzTeam said:
Please try to booting into bloader mode by press and holding both buttons.
Click to expand...
Click to collapse
Nothing happened ..
And when you charge it, do you see charge icon on the watch screen ? otherwise it is dead batt.
connect it to the charger and a computer. launch an ADB shell and try "adb reboot". That might not be the correct command, but its something like that. Also, when holding both buttons, how long did you hold them for? Its common for a force reboot button press combination to take several seconds (like up to 15 or more) in order to make the device to force reboot.
Youdoofus said:
connect it to the charger and a computer. launch an ADB shell and try "adb reboot". That might not be the correct command, but its something like that. Also, when holding both buttons, how long did you hold them for? Its common for a force reboot button press combination to take several seconds (like up to 15 or more) in order to make the device to force reboot.
Click to expand...
Click to collapse
Hi everybody, i tried all what you said, i held the single button i have for 2 min and nothing happened.. I cannot use bootloader and ADB because the watch can't stay connected more than 5sec to computers.