I have s3 Neo i9301i.. from 4 months.
Before it charged well and fast but now the charging is annoying.
It take a lot of time to charge (3-4hrs) and while in use during charging it charges about 1% for 10minutes.
I am on Ciro rom v2....based on motion v17...
Could somebody give a fix ?
Buy a 2A charger. It solved my problem
Sent from my S3 Neo+ (GT-I9301I) running Stock ROM with @Sev3n Kernel
Change your USB cable.
Related
I've got my note today and the charger has output 5V and 1.0A
My galaxy s charger has 5V and 0.7A
Can I charge the galaxy note with the galaxy s charger? I know it will take longer but beside the charging time is there any other downside? can i damage my battery?
thx for help
I think you might mess up your battery stats if you used the galaxy s one first, but i think if you do the first 5 chargers from flat to 100% to get them right no reason why you couldn't use the galaxy s one. After all usb charging is slightly less output than mains.
thx alex
Sent from my GT-N7000 using XDA App
I use my GS charger most of the time
I dont notice much difference in charging time.
ONLY charging time is the diffrence. most noticable if gameing, navigating or streaming music via 3G+bt at the same time.
I have stock charger for note 3 exynos and stock usb cable , during charging the current is 1200 mA through galaxy charge test lite while it should be 1.800 mA according to charger specs ..
The battery chargred fully for less than 2 hours. Do i need to change charger or cable or do nothing ?
By the way i am using dr ketan rom + pekaka 4.4 kernal
Thanks
1200mA while the screen is on, and 1800mA with it off.
Ok many thanks
Hi all.
My Nexus 7 is flashed with DU 5.0.2 and charging is very slow. This was also the same when I had XenonHD flashed. It charges so slow that it discharges faster than it charges. I do not know what to do. I heard about flashing a fast charge kernel but heard flash charge was only for usb devices like laptops.
I own a s3 Neo i9301i and before I didn't have charging problems. Now my phone charges very slowwwww.It takes more then 10 hours for a full charge.... I have motion ROM .can somebody give me a solution please?????
Buy a 2A charger. It'll solve all your problems. I had that problem too and That's how I fixed it
Sent from my S3 Neo (GT-I9301I) using Motion Rom v17 with eMotion Kernel
The Forgotten said:
Buy a 2A charger. It'll solve all your problems. I had that problem too and That's how I fixed it
Sent from my S3 Neo (GT-I9301I) using Motion Rom v17 with eMotion Kernel
Click to expand...
Click to collapse
So it is not a problem of the phone...it charger problemm.
But how!!!!before it charged very well even with current charger???
And how can i check tha a charger is 2A ?
Rremi said:
So it is not a problem of the phone...it charger problemm.
But how!!!!before it charged very well even with current charger???
And how can i check tha a charger is 2A ?
Click to expand...
Click to collapse
Well, I can't explain you how this happens, but it happens. To check if the charger is 2A, look at the charger and look for OUTPUT. There you should see the voltage and, in front of it, the Amper value. It would be preferable to use a Samsung 2A charger.
Sent from my S3 Neo (GT-I9301I) using Motion Rom v17 with eMotion Kernel
Rremi said:
So it is not a problem of the phone...it charger problemm.
But how!!!!before it charged very well even with current charger???
And how can i check tha a charger is 2A ?
Click to expand...
Click to collapse
The problem isnt with the power brick. It is related to the rom that you are using. It seems that motion rom has this bug. I personally love this rom and i was using it and also a rom that was based on it and they have this awful problem but because i have note 4 and it has 2A quick charger im using it and it kinda charges a litttle bit faster but its still slow compared to charging on stock 4.4.2. Its annoying tho and i will try a different rom today!
I had a similar issue with my tablet.It took 8 hours to charge.All i did was to change the original USB cable and used a standard one with the original charger and it charged normally after that.
You can use Ampere(https://play.google.com/store/apps/details?id=com.gombosdev.ampere&hl=el) to measure the charge current.
My battery drains too fast, using my phone continually it can discharge in about 3 hours. I have installed FirstFlight N7 Themed V6 ROM and I feel the battery discharges faster than in the stock rom did. I installed Ampere app to measure how much current my phone was charging and discharging and when the charger is not plugged in it discharges at 460mA, is that normal? I bought a Samsung 2A charger and it charges at 600mA or maximum 700mA but I changed the usb cable of the charger and it charges at 860mA or maximum 900mA. I don't understand because it should charge at 1900mA but it doesn't, how does I reach that? I need to mentioned that I charge the pone directly in a wall, not in a usb port, and why does my battery drain too fast? I need help :crying:
Charging current is dynamic. You can't make it always 1900mA as it highly depends on current device status, USB cable used when charging, etc. Also, ported ROMs tend to drain more battery compared to stock one and it's normal and not an issue for those who enjoyed ported ROM.
Sent from my Redmi 3 using XDA Labs