Hi folks,
I happened to have lost my original charger for Samsung Galaxy Note 3, and all I have now is the USB cable. For emergency purposes, I need to charge my phone and it doesn't charge fast connecting to a PC. I do have an adapter for Samsung Galaxy S4.
Is it OK to use the USB cable on Samsung Galaxy S4 Adapter and charge my device? Or will there be a problem?
My phone battery is a 3.8 V Li-ion and 12.16 Wh
The Galaxy S4 adapter shows an output value of 5.0 V and 2.0 A
Awaiting replies at earliest ...
Thanks!
-------------------
Edit -
If that's hard ... can anyone holding a Galaxy Note 3 please post your output value mentioned on the original adapter?
Find details in pic
Sent from my SM-N9005 using xda app-developers app
Note 3 charger in picture
Sent from my SM-N9005 using xda app-developers app
It should be fine, most wall charges are fine. If you want faster charging you can make a charge only cable (http://www.youtube.com/watch?v=zwKCXJc1iTc) and it will always charge at max speed. While this isn't good for your PC, it works perfectly for car chargers.
Any 5MV charger will work perfectly.
The official Note 3 charger is 5.3V - 2A, so using a 5V adapter will be fine, just a bit slower.
I use my old HD2 and S3 charger half the time.
using a 2A charger will be fine. 1A charger need double of the time
Sent from my SM-N9005 using Tapatalk
Hi,
I tested various chargers and usb cables, including the normal micro usb from the older devices, most of them works like a charm
Including my old OTG dongle (usb 2.0), I didn't yet compare the speed difference between both...
GreenXSI said:
Hi folks,
I happened to have lost my original charger for Samsung Galaxy Note 3, and all I have now is the USB cable. For emergency purposes, I need to charge my phone and it doesn't charge fast connecting to a PC. I do have an adapter for Samsung Galaxy S4.
Is it OK to use the USB cable on Samsung Galaxy S4 Adapter and charge my device? Or will there be a problem?
My phone battery is a 3.8 V Li-ion and 12.16 Wh
The Galaxy S4 adapter shows an output value of 5.0 V and 2.0 A
Awaiting replies at earliest ...
Thanks!
-------------------
Edit -
If that's hard ... can anyone holding a Galaxy Note 3 please post your output value mentioned on the original adapter?
Click to expand...
Click to collapse
buy any chinese charger man it'll be a gud alternate for d original one
You can use pretty much anything.
I charge my Note 3 with the original one (5.3v/2A), I charge it with a Note 2 charger (5.0v/2A) and I charge it with an old Nokia charger (don't recall voltage but it is 0.8A). It will just charge slower, but otherwise works perfectly.
battery problem
recently I've bought a galaxy tab s 8.4 , but take too mach time (about 6 hours) to charging with it's stock charger (5.3 v , 2.0 A) , when i charged with note 4 charger (5 v , 2.0 A) , it charged normal (about 2.5 hours)
now i have two questions :
1. the note 4 charger is suitable for my device ? isn't bad for battery life ?
2.is it possible that the stock charger was fake !!!???
Hi,
I have a Note 3 N900 version. & I am on Love 89 2.2 Custom Rom
Thing is, My battery charge has suddenly gone down.
I mean it was working pretty well but since last night...it charges real slow.
& the Phone is not even a year old so m confused as to why this is happening.
I checked the charging Unit with Charging Report available on the Playstore & it shows as 300 for both Current & average.
May i know what should be the default charging unit.
Is this the cause from the Rom or the USB cable?
Thank you
Try charging it with an other charger and see if it still charge very slowly... (if you dont have another usb 3 cable, normal microUsb that all other android phones have, fit into the right part of the note3's usb 3 port)
Sent from my SM-N9005 using Tapatalk
I use the grand 2 for now 1.5 years and recently i figured out that my phone drained it's battery faster but charging takes almost 4 hours.0_o
What can be the issue?
Btw:the combos used so far
Samsung charger 1A output org. Cable~4 hours
Adaptive fast charger org cable ~4.5hours
Samsung charger 2A sony power bank cable~4.7hours
Ipad air 1 12w charger output 2.4A org cable~5.2hours(0_o)
Generic charger from ebay output 1.5A generic cable~6hours
Rom used:Xosp 6.3
Please help as soon as possible
THANKS!
I am sorry but by mistake i clicked on the q and a thread option for grand 2 can it be changed???
Hi. My S3 neo original charger not charge my phone with full power. Now I'm use CM 12.1 and when I charge ma phone it charge about 500-600 mA but the charger has output 1A. Now my phone charge from 0-100 % almost 4 hour (On stock everything was the same so I think that is charger). I want buy a new samsung charger but in my country( Poland) in most electronic shop is universal Samsung charger but it have output 2.1 A. This is safe for battery and phone or better search for 1A charger?
The phone can accept up to 750mA per rail or 1.5A all in all. The one that is declared 2.1W is OK & safe to use.
P's it's not a charger (93%) but using one with 1.5A(+) will help.
My battery drains too fast, using my phone continually it can discharge in about 3 hours. I have installed FirstFlight N7 Themed V6 ROM and I feel the battery discharges faster than in the stock rom did. I installed Ampere app to measure how much current my phone was charging and discharging and when the charger is not plugged in it discharges at 460mA, is that normal? I bought a Samsung 2A charger and it charges at 600mA or maximum 700mA but I changed the usb cable of the charger and it charges at 860mA or maximum 900mA. I don't understand because it should charge at 1900mA but it doesn't, how does I reach that? I need to mentioned that I charge the pone directly in a wall, not in a usb port, and why does my battery drain too fast? I need help :crying:
Charging current is dynamic. You can't make it always 1900mA as it highly depends on current device status, USB cable used when charging, etc. Also, ported ROMs tend to drain more battery compared to stock one and it's normal and not an issue for those who enjoyed ported ROM.
Sent from my Redmi 3 using XDA Labs