So my SD card (Samsung Pro plus 32GB) just got corrupted, I dont know how, but maybe from me flashing a new firmware or something.
whats broken here? I plugged the sd card to my PC and reformatted it and its still corrupted on my phone,
So is the SD card broken?, Phone hardware or software?
is there a fix?
thanks
EDIT:
SD card is 100% fine on my PC and TWRP recovery can detect it and I even managed to get a Nandroid backup saved to it through TWRP, whats going on?, but on Android it always shows up as SD card is corrupted.
NEVERMIND! I Reflashed the same XSA firmware and now SDCard works, its software side problem.!
Related
I have a M919V Galaxy S4 which is compatible with both the i9505 roms and M919 (TMO) roms. I was on a i9505 TW rom and I decided to download a rom from the TMO section. When moving from a i9505 rom to a M919 rom, I had to flash the recovery corresponding to the model. So I downloaded the T-Mobile version of Philz Recovery, but I got a status 7 error. Then I downloaded the md5 version and flashed it via odin 3.07. It was successful. After flashing the recovery, I flashed Beanstalk rom for the t-mobile variant. Everything went fine until I tried to make a nandroid of my current setup for Beanstalk. I kept getting errors. When I plug my phone in (with my sd card), and try to add or delete something, it says "remove write protection and try again". So I tried connecting my sd card to my sd card adapter. When I delete files from my adapter, the error message doesn't show up. BUT... after disconnecting and reconnecting it again, the files are back where they were. I tried reformatting it but nothing happens. It seems like my sd card is only read as write protected when connected to my phone but it has no idea which state it's in when connected to the sd card adapter.
I don't know if the problem started with odin or when I flashed the rom but can anyone please tell me what's going on with my sd card?
I had the same read-only error before, but it was fixed after running "scan disk" from windows, but since you mentioned that the files are back even after you delete them, I'm afraid that your card might be damaged. Try to look for a tool named HP USB format tool, or something like that, if after formatting it with that tool it still shows the same behavior, it will be most likely that it is damaged.
So I put 4.4.4 NI2 on my phone today. Noticed that the phone was not recognizing the card. Put the card in another Verizon Galaxy S5 runnning 4.4.2 NCG and it recognized the card. Put the card in a microSD card reader in my PC and it recognized it. I backed up everything formatted it on both the NCG phone and Windows, but still can't get the card to recognize on my phone running 4.4.4 NI2. I should mention here the card worked fine before the update. I was able to get another 16GB card to work in the 4.4.4 phone. It is just strange. Has anyone else experienced this weirdness? Oh, the card that is giving me problems is a Sandisk Ultra 64GB SDxc. Any thoughts? Thanks in advance.
Same problem with same versions and 64GB Card.
scadilla said:
So I put 4.4.4 NI2 on my phone today. Noticed that the phone was not recognizing the card. Put the card in another Verizon Galaxy S5 runnning 4.4.2 NCG and it recognized the card. Put the card in a microSD card reader in my PC and it recognized it. I backed up everything formatted it on both the NCG phone and Windows, but still can't get the card to recognize on my phone running 4.4.4 NI2. I should mention here the card worked fine before the update. I was able to get another 16GB card to work in the 4.4.4 phone. It is just strange. Has anyone else experienced this weirdness? Oh, the card that is giving me problems is a Sandisk Ultra 64GB SDxc. Any thoughts? Thanks in advance.
Click to expand...
Click to collapse
Same problem with 2 Sandisk Ultra 64 GB micro SD cards. Start immediately after accepting the 4.4.4 update. I receive an error that says the card is damaged try reformatting. I have a Sandisk 32 GB that seems to be fine. I hope a fix will come soon.
This problem came up before.
http://forum.xda-developers.com/showthread.php?p=55504957
Per that thread, it started with the NHA update and fixes itself when they updated to NI2.
warpedmind0u812 said:
This problem came up before.
http://forum.xda-developers.com/showthread.php?p=55504957
Per that thread, it started with the NHA update and fixes itself when they updated to NI2.
Click to expand...
Click to collapse
Yes, my problem started at NHA, but I still have the issue on NI2.
I had 2 different sd card that would not / could not be recognized or formatted on a fresh factory reset NI2. I reverted back to NE9 and had no problems with either card. For what its worth.
Hello
I'm having a problem getting my G2 to recognize the SIM card. I just did a glass/digitizer/LCD/casing replacement and everything else is working no problems. I put the card in my old phone and no problems with the card. Looking into the card reader all the pins seem to be intact. You can see the marks on the SIM card chip from the pins. The device is rooted. My next step is to do a backup and reflash the factory ROM. I can't really see this being the problem though...
Any other ideas?
Just unlocked bootloader and installed TWRP and root etc. on MXP all working.
SD card is now not seen by phone and not when connected to pc by cable. Card works in pc and moto g 2014.
Sandisk Extreme 32GB
I've searched but cannot find anything.
Thanks in advance.
Just tried connecting it using an OTG + adapter and it is recognized but still not when in the SD holder in the phone????
25/4
Still no fix. Factory data reset. Reformatted SD card to exFAT. Still not seen.????
Can't see this as a hardware problem. Please, anyone...
11/7
Phone sent to repairer in Manchester (UK) who said they could fix it; had it for nearly a month. Finally said it was not repairable. Sent it back boot looping and flat battery. I managed with fastboot to restore stock ROM then rooted again. So now it is as before, working correctly but no SD card recognition. The pins in the reader look unbent.
Do I give up on this?? Is there a software fix or command I can try? Mainboard damage?
It all seemed to happen when I unlocked rooted etc.
Rick O said:
Just unlocked bootloader and installed TWRP and root etc. on MXP all working.
SD card is now not seen by phone and not when connected to pc by cable. Card works in pc and moto g 2014.
Sandisk Extreme 32GB
I've searched but cannot find anything.
Thanks in advance.
Just tried connecting it using an OTG + adapter and it is recognized but still not when in the SD holder in the phone????
25/4
Still no fix. Factory data reset. Reformatted SD card to exFAT. Still not seen.????
Can't see this as a hardware problem. Please, anyone...
11/7
Phone sent to repairer in Manchester (UK) who said they could fix it; had it for nearly a month. Finally said it was not repairable. Sent it back boot looping and flat battery. I managed with fastboot to restore stock ROM then rooted again. So now it is as before, working correctly but no SD card recognition. The pins in the reader look unbent.
Do I give up on this?? Is there a software fix or command I can try? Mainboard damage?
It all seemed to happen when I unlocked rooted etc.
Click to expand...
Click to collapse
It seems like it's hardware problem that's is why it ain't recognized.
But Better trying more you should flash new row after clearing all cache / Dalvik cache etc and check it whether it works or not??
It still you face same problem try to repair your phone again through service Centre again may be luck by chance problem sortout or if not.
Better to give it up on it.
Rick O said:
Just unlocked bootloader and installed TWRP and root etc. on MXP all working.
SD card is now not seen by phone and not when connected to pc by cable. Card works in pc and moto g 2014.
Sandisk Extreme 32GB
I've searched but cannot find anything.
Thanks in advance.
Just tried connecting it using an OTG + adapter and it is recognized but still not when in the SD holder in the phone????
25/4
Still no fix. Factory data reset. Reformatted SD card to exFAT. Still not seen.????
Can't see this as a hardware problem. Please, anyone...
11/7
Phone sent to repairer in Manchester (UK) who said they could fix it; had it for nearly a month. Finally said it was not repairable. Sent it back boot looping and flat battery. I managed with fastboot to restore stock ROM then rooted again. So now it is as before, working correctly but no SD card recognition. The pins in the reader look unbent.
Do I give up on this?? Is there a software fix or command I can try? Mainboard damage?
It all seemed to happen when I unlocked rooted etc.
Click to expand...
Click to collapse
I have the same problem after putting the sdcard tray back in the wrong direction. Sdcard doesn't work since then because some pins in the tray are damaged and won't make contact anymore. I lost warranty and can live without,but you can try to fix it under warranty. Maybe they won't even notice you unlocked the bootloader.
More
Is it possible that rooting the phone made the SD card reader problem or just a coincidence?
Rick O said:
Is it possible that rooting the phone made the SD card reader problem or just a coincidence?
Click to expand...
Click to collapse
don't restore flash the whole stock firmware again. see if it works.
That is what I did. Flashed the latest stock firmware. I didn't mean restore.
Hi, I just bought a new Redmi 2 Prime HM2014811 (China Unicom dual sim version). I fastboot flashed my Redmi 2 Prime to the latest China Dev ROM (without inserting SIM cards and MicroSD card), and after flashing I inserted my MicroSD card to find out that it wasn't detected by my Redmi. I flashed custom recovery (TWRP) and still the same my MicroSD wasn't detected at all. Is this a bug or my phone has faulty hardware? Does anyone know whats wrong with my phone? Has anyone been through this or has an experience similar to this one? Please do reply. Thank you.
*PS: My MicroSD is Transcend Premium 400x 16 GB. MicroSD Format is fat32 and formatted using SD-Formatter.
Agree. After restore backup from the Lineage and/or Mokee, both don't recognize my SD card, even after formatting or transforming to internal memory. At miui everything was ok. The solution I found was to install Mokee 6.0 MM. Its fine now.