I have a retail note 4 converted to Developer.Because i don't want to power off my phone to reboot in to recovery i just tried this app and work fine..
Related
So there is no clockwork recovery for the galaxy tab for sprint? Is it safe for me to use any of the others like for verizon maybe?
Sent from my SPH-P100 using XDA App
Raheem387 said:
So there is no clockwork recovery for the galaxy tab for sprint? Is it safe for me to use any of the others like for verizon maybe?
Sent from my SPH-P100 using XDA App
Click to expand...
Click to collapse
I was thinking the same thing, but for the Euro one.
I used the bootstrap and i got cwm working but it would be good to have it there for sure.
Raheem387 said:
So there is no clockwork recovery for the galaxy tab for sprint? Is it safe for me to use any of the others like for verizon maybe?
Sent from my SPH-P100 using XDA App
Click to expand...
Click to collapse
goto this thread http://forum.xda-developers.com/showthread.php?t=870690
goto post #486 on page 49. download the file and unzip it. it will be a zimage file. flash the zimage file using heimdall. instruction are below. you don't need to adb install as heimdall will be easier to and it works.
1.
First I rooted (use one click root) then downloaded rom manager.
2.
flash zimage using heimdall when it reboots it will get stuck at the samsung screen long hold the power button to shut it off. boot into recovery (cwm) power button plus volume up button it will start backing up to do the fs conversion but it will fail at /data and /cache. it will leave you in recovery.
3.
While still in recovery select factory reset/data wipe when finished also do a cache wipe (yes I know data whipe also wipes cache)
4.
select reboot system, if you let it try to boot it will loop/hang on the SAMSUNG logo, this is not an issue just hold power key until it powers off.
5.
while off hold volume up + power until you see the SAMSUNG logo then release both keys! NOTE: if step 4 does not fully power off and reboots just keep holding the power button until the screen blanks again then let go and quickly hold down only volume up + power until you see the SAMSUNG logo.
6.
once it boots back into recovery (cwm) it will start the same backup/conversion process again, this time it will finish and leave you in recovery.
7.
select reboot system and wait for it to load the tab back to froyo. (it will be back to factory defaults with the activation screen again)
8.
Your tab will still be rooted so install terminal emulator and run "mount" to verify that your partitions are ext4.
9.
Power off then boot back into recovery with volume up + power, it will boot back into recovery (cwm)
10.
Do a backup and reboot your tab.
How do you install CWM????
00r101 said:
How do you install CWM????
Click to expand...
Click to collapse
Go to the galaxy tab forum and I have better instructions than here. Plus I have the links for all the files you will need.
Sent from my Xoom using Tapatalk
I had JB 4.3 already installed with root on my N7105, but last month came a new minor update called N7105ZHEML. This is for Hong Kong versions of the Galaxy Note II LTE. This seems a fairly exotic update, as I couldn't find much info about it and I had to scramble from dozens of various sources with more or less success. The update installed without a glitch via Odin, but I couldn't get the phone to re-root nor could I get back to my old NAND backup, as the phone didn't seem to restart properly after a restore. So you can imagine that I got slightly nervous...
Please note that this is for the N7105 (LTE version) and the Hong Kong Version of the latest 4.3 update, called N7105ZHEML.
It might work for other hard or software too, but I can't be sure.
Do everything on your own risk, as you can easily lose all your data or even worse, brick your phone if you don't know what you're doing!
Anyway, here is what worked for me, hope this helps somebody:
Check new N7105 firmware: http://www.sammobile.com/firmwares/1/?model=GT-N7105&pcode=TGY
1. Backup using ROM Manager/NAND
2. Backup using Titanium
3. Download new ROM file, unzip it
4. Open Odin 3.09, Click AP/PDA and choose N7105ZHUENA1_N7105ZZHENA1_N7105ZHEML1.tar.md5
5. Make sure re-partition is NOT ticked
6. Turn off phone, then press Vol Down, Home and Power until boots
7. press Vol Up (Continue)
8. Connect to USB, Odin should turn blue
9. Click Start, wait till phone boots (takes really long time, incl. Media Database update)
10. Do not disconnect until PASSED! shows up in Odin
Install TWRP Recovery:
Check here for updated TWRP: http://teamw.in/project/twrp2/125
1. Open Odin 3.09, Click AP/PDA and choose openrecovery-twrp-2.7.0.0-t0lte.img.tar
2. Make sure re-partition is NOT ticked
3. Turn off phone, then press Vol Down, Home and Power until boots
4. press Vol Up (Continue)
5. Connect to USB, Odin should turn blue
6. Click Start, wait till phone boots
De-Knox, BusyBox and Re-Root with PowerBoxV2:
Check here for updated PowerBox: http://forum.xda-developers.com/showthread.php?t=2651601
1. Boot into TWRP Recovery: Turn off phone, then press Vol UP, Home and Power until boots (can be done without booting up after installing TWRP)
2. Remove SD Card, copy Powerbox_v2.zip to root of SD card
3. Install ZIP file from TWRP
4. Run PowerBox, choose only first option (DeKnox, BusyBox and Root), execute
5. Clear Cache and Dalvik
6. Reboot
If Superuser doesn't install or root doesn't work correctly:
1. First try to install SuperSU from GooglePlay
If this fails:
1. Download UPDATE-SuperSU-v1.93.zip for TWRP from: http://forum.xda-developers.com/showthread.php?t=1538053
2. Copy it to root of SD card
3. Boot into TWRP Recovery: Turn off phone, then press Vol UP, Home and Power until boots
4. Install ZIP file from TWRP
5. Reboot
Boot into Bootloader: Turn off phone, then press Vol DOWN, Home and Power until boots
Boot into Recovery: Turn off phone, then press Vol UP, Home and Power until boots
Sent from my GT-N7105 using Tapatalk
Hi
I tried to flash TWRP to my Q800, but now after falshing i am not able to reboot into TWRP recovry mode(pressing power and volume up). My phone just restarts when i try to enter recovery
I am only able to enter factory mode when i press power and volume down button
Used Farmaroot and mobile uncle tools to falsh recovery, also tried to flash using SP flash tools
Please help me as i need to flash custom roms
Thanks
Twrp not working then u can use cwm recovery
Sent from my D6503 using XDA Free mobile app
I tried that already, none of the recovery is booting up not even the stock recovery
I can go to factory mode when i press Volume down plus power button and when i press volume up plus power button it just restarts
Is ur phone dead?
Sent from my D6503 using XDA Free mobile app
My phone is not dead, i am able to start it and use it
Issue is i am not able to boot into recovery mode, I tried to install TWRP, CWRP, and stock recovery also, but i am not able to boot into recovery
Steps - Rooted using farmaroot and flashed recovery using mobile uncle tools and also tried falshing through SP tools
When i press volume up and power button phone just restarts
When i press volume down and power button it enters Factory mode
I also tried booting inot recovery by connecting my mobile to system and used ADB to boot into recovery, but the phone just restarted
-----adb reboot recovery
THink my revcovery is corrupted and also want to know what is factory mode
Badly need help here as i need to falsh custom ROM
Try mobile uncle tools to reboot to recovery or may u hv flashed wrong version of twrp.
Download stock rom using sp flash tool, if problem still persist, go to service centre
Sent from my D6503 using XDA Free mobile app
Hi there,
1. Rooted my phone using ioroot
2. Installed TWRP using AutoRec
3. Rebooted into Recovery
4. Mistakenly wiped everything from my phone using TWRP
5. Pushed CM13 and GApps to my phone using ADB
6. Tried to installed both simultaneously using the TWRP queue option (CM13 first in the queue)
7. Phone rebooted, LG Logo displayed and went to constant black screen after 1 second
8. Can not access recovery mode anymore
9. ADB doesn't recognize the phone anymore
10. I still can access Download Mode using the Vol Up button and plugging the phone to PC using USB cable.
11. Can not install stock ROM using LG Flash Tool. It crashes when reading phone information
12. However the LG Support Tool seems can recognize my phone with Software Version: D80230C and it seems that the "Upgrade Recovery" button works in "Options" menu of it (but canceled it as it downloads 1.6 GB ROM).
So:
1. Seems that I have wiped recovery from my phone
2. Download Mode accessible
3. ADB unusable
Any possibility to push TWRP to my phone without ADB but with Download Mode?
It's new year holidays in Iran and there's no repair center open here.
Heya,
Got in a really huge pickle myself yesterday by installing a bootstack, plus I wiped everything as well. Lost the recovery and LG logo showed for a sec when booting. Fortunately I got it to work again and I'm sure you can too.
So here's what you do:
1. (may not be necessary) Check if your phone is in fastboot mode after the 1 sec boot logo and also if you connect your phone with the PC will you see a lot of partitions. If yes then get yourself the handy tool called SRKTool. Open it up, choose "4" to go to fixing options, then choose "5" to unbrick and choose your model. Next just look at what they write you.
2. Get yourself a "LGD802AT-00-V10b.....tot" tot file which you can find in the forum.
3. Watch the video explaining how the process works and also download the required files mentioned in the video description "https://www.youtube.com/watch?v=wJtcPNklrfw".
4. After following the video you will hopefully have a working phone with android 4.2.2.
5. The rest is up to you; flash a KDZ Lollipop ROM and using SRKTool to root and put TWRP to use that or flash CM13.
To sum it up, there is a way out of this problem.
Good luck!
I just installed cwm recovery on my note 3 that had stock root android 5.0. I used recovery tools from the app store and selected reboot into recovery after it flashed it. Now all it does is try to reboot into recovery fails and restarts the process over again.
I can't get into download mode and removing the battery does not help.
Any ideas?
Shouldn't be that severe. Are you sure you're pressing the right buttons to get into download mode?
Sent from my SM-N920C