Related
Just about to open Windows (on the top floor) and throw this thing through it!
Been waiting for months to upgrade to exec from xda2s, and 18hours after opening the box i'm ready to junk it. Cannot get it to sync at all. Read all the forums, zone alarm off, norton off, tried running as4.1, and still i'm getting dizzy watching this little green wheel going round and round and round and round and round..... 'connecting'
Does anybody have a work around or managed to get it to work. Without this facility the units useless to me, apart from maybe a quick £300 quick profit on ebay.
Help please.
I had a simlar problem, until I reluctantly ditched all my other Active sync partnerships (like my xda2 PPc partnership). then created a new partnership and it worked fine.
Good luck
Hi, Stupid question, but where do the older profiles live on my pc? I've looked in the activesync folder but no clues.
Open Avtivesync, go to file, click on mobile device, check and see what devices you have listed. then go to Delete mobile device.
This realy was a quick fix for me , you should be able to have multiple patnerships, perhaps some one else could suggest a better solution.
Thanks for your advice, but it looks as though I had deleted all previous profiles when I did a clean install of as4.1, and still getting dizzy!
Thought about calling O2, but quickly realised I would have better luck just ringing a random number out of the phone book.
I've tried every combination in the connection settings box, still no joy.
Need a solution soon before I reach for the Scotch and Razor Blades.
I've completely given up with this thing. Managed to get it back in the box (which was a minor challenge compared to getting Activesync to work), somebody please save me from ebay.
Do you have you Exec running in Corporate mode? I found that in this mode it won't sync; you just get "Connecting"...and nothing.
I switch to basic or personal and it syncs with no problem. Myabe this will help.
If the machine you are trying to sync with is connecting to an Exchange Server then you will have difficulties.
Try syncing the calendar, contacts and tasks direct with the exchange server and do the rest (notes etc) with the laptop.
Activesync 4 is so rubbish I have resorted to wirelessly syncing direct to my exchange server.
For a while I was cursing the Exec as I had just got my 2s just how I wanted it when I up(?)graded but I remembered that half the fun of these things is solving the problems, even if it doesn't seem like it at the time!
The main thing that you need to remember with ActiveSync 4.x is that you must install this before connecting your EXEC.
If you don't the microsoft driver gets installed instead (and in my case) no amount of deleting/reinstalling was able to recover the situation.
Whilst I was in the middle of that crisis I did some basic PD to try and rectify. Including
a) Installing AS 4.1 build 4807 on another system (preferably clean installed say XP SP2)
b) trying another cable
c) Doing a hard reset of your device and then repeating above steps
d) (obviously!) removing all previous versions of ActiveSync (also afterwards using regedit to remove any final traces and erasing C:\Program Files\Microsoft ActiveSync) and then re-installing
I have tried to include some Device Manager pictures of a working system for reference purposes
Throught trial, and very much swearing at the walls, I've discovered the following:
1. If I have the XDA Exec switched on and connect the USB cable, then I can guarantee a 95% failure to connect.
2. If I turn off the Exec, by the power-switch on side, then connect the USB cable and just leave ActiveSync to power everything up, then I have a 95% success connection rate.
On very odd occasions, I've had to disconnect the Exec, turn it off, then plug the USB in again. And once I restarted the workstation first - probably didn't have to, but was going for a coffee anyway.
AGHHH
I had a failure with Active Sync and established that it still worked with my 2 C500's so I phoned orange.
Eventually made my way to level 3 (highest) tech support to be told that its microsofts problem and that they have withdrawn Active Sync 4 until they can fix it.
I can connect to my M5000, move files via explore but as for the necessity of syncing itand my contacts..............forget it
MArk
Interaction with Outlook
My sync problems went away when I configured Zonealarm to allow it to connect.
I also had to install Outlook, which I don't like as I use Thunderbird for Email. Sync would still not work untill I allowed Outlook to be the default email client. However, I have not defined any accounts on Outlook and Thunderbird does not seem to mind.
Re: Interaction with Outlook
Romney said:
Sync would still not work untill I allowed Outlook to be the default email client. However, I have not defined any accounts on Outlook and Thunderbird does not seem to mind.
Click to expand...
Click to collapse
I got a whole series of increasingly depressed emails from my TBird install after I stuck Outlook on my lappie... In the end I had to take it out for the evening, give it some new extensions and what-not before it started talking to me again...
I spent some time yesterday trying to find an answer to my continuous problems connecting with Blackberry Connect. This included different ROMS and different versions of Blackberry and Desktop Connect software.
My problem (like many others) is that the initial set-up of Blackberry connect seems to work but as soon as I restart the device or service, it is disconnected and sometimes the service completely shuts with the blackberry icon dissappearing from the tray.
The best success I had (and is still working after 24hrs) is to install Blackberry service without wireless calandar support. Somehow for all versions of ROMS and connect software, enabling wireless calander is causing the disconnects. I can't remember what the service name for this is but for those with similar problems this might help.
On a similar note, does anyone know why wireless calander could be bringing down the blackberry service?
Sean.
seanrkelly said:
I spent some time yesterday trying to find an answer to my continuous problems connecting with Blackberry Connect. This included different ROMS and different versions of Blackberry and Desktop Connect software.
My problem (like many others) is that the initial set-up of Blackberry connect seems to work but as soon as I restart the device or service, it is disconnected and sometimes the service completely shuts with the blackberry icon dissappearing from the tray.
The best success I had (and is still working after 24hrs) is to install Blackberry service without wireless calandar support. Somehow for all versions of ROMS and connect software, enabling wireless calander is causing the disconnects. I can't remember what the service name for this is but for those with similar problems this might help.
On a similar note, does anyone know why wireless calander could be bringing down the blackberry service?
Sean.
Click to expand...
Click to collapse
I had a similar problem with the BB connect (2.1.2.16) client on my Wizard. BB connect works fine without calendar sync. I had similar stability issues when I used the old BB connect client (1.x) when my mailbox got too large, and I have a HUGE amount of calendar information thus I am guessing it is size that is causing the issue. It does not help that the BB connect calendar sync doesn't specify a cutoff date to reduce the number of old entries.
I am running BB Connect 2.1.2.16 on my 1605 and have constant issues with the BB client.
I get the odd VCAL error occuring but these are rare compared to the BB Client just switching itself off on a regular basis. Restarting the client does not fix the issue and I have to softreset the device. The device is generally slow and unstable after a long period of running the BB Connect client constantly.
I send and receive about 200 mails a day and keep a weeks worth of mail in my Blackberry mailbox so yes perhaps this is size related.
However I have a collegue in Austria who is using the T-Mobile version of the Hermes, and a slightly earlier version of BB Connect (2.1.2.15 I think) and it seems to be a lot more stable.
Any clues ??
Halfpenny said:
I am running BB Connect 2.1.2.16 on my 1605 and have constant issues with the BB client.
I get the odd VCAL error occuring but these are rare compared to the BB Client just switching itself off on a regular basis. Restarting the client does not fix the issue and I have to softreset the device. The device is generally slow and unstable after a long period of running the BB Connect client constantly.
I send and receive about 200 mails a day and keep a weeks worth of mail in my Blackberry mailbox so yes perhaps this is size related.
However I have a collegue in Austria who is using the T-Mobile version of the Hermes, and a slightly earlier version of BB Connect (2.1.2.15 I think) and it seems to be a lot more stable.
Any clues ??
Click to expand...
Click to collapse
I run 2.1.2.16 on a Wizard and without PIM, it works reasonably well. The most I've kept in the BB inbox is around 400 mail as that was around when the BB 1.x client used to play up an I got used to deleting the mail from BB (I do not sync deletes with my Inbox for this reason). If you are keeping 1000 mail I would say try and delete the mail daily (including deleting from the "Deleted" folder) and see if it improves. I know that with the BB 1.x client, if I got too many mail the BB client would start chewing up CPU and the device would act strange, and sometimes I needed to soft reset, disable BB, delete the mail, reset again and things would be good again.
What baffles me is why people keep so many emails on their BB's I read a message, if it requires an immediate response I send a note from the BB and then maybe follow up later on the PC, I then delete the message, if its not relevant I read and delete it, if it can be dealt with later, I read it, then mark it as unread and then delete it from the BB, I do not sync my mailbox with the BB thus all mail is still in my Outlook inbox...
tonyb15re said:
What baffles me is why people keep so many emails on their BB's I read a message, if it requires an immediate response I send a note from the BB and then maybe follow up later on the PC, I then delete the message, if its not relevant I read and delete it, if it can be dealt with later, I read it, then mark it as unread and then delete it from the BB, I do not sync my mailbox with the BB thus all mail is still in my Outlook inbox...
Click to expand...
Click to collapse
I think it just depends on how people work. I tend to read on the run (between meetings) and I delete when I remember sometime at home or on the train on the way to work or something like that.
Hello everyone,
After spending with the dark side of Blackberry phone, I went back to WM because I was amazed by the HD2.
One thing I am not amazed though is my silly Windows Mobile Center.
In fact, I am using Windows 7 Pro. The first I setup partnership it worked fine to sync with my outlook (personal email account). Then I setup on the phone, my work email (i.e. exchange server setup for online activesync), and the sync with the server is working fine. But when I plugged back the USB cable to sync with my personal PC outlook (which is configured with a Gmail account), it doesn't connect at all.
The computer doesn't seem to see the device. And the phone doesn't seem to see the computer.
What I have done so far:
- Check and enabled in Windows firewall all the Windows Mobile Center program
- Uninstall and re-install the driver for PocketPCSync (under Mobile devices in Device Manager)
- Delete my partnership (but I can't recreate it since I can't see the phone
Nothing is changing. I can't sync with the PC at all. On the other hand the sync with the exchange server is working fine.
Is the problem due to the fact that I have a pc-sync with outlook using a gmail account, and an online sync setup with an exchange server?
It is quite an annoying problem.
Thank you for your help
Wouldn't your HD2 be connected in USB disk mode instead of ActiveSync mode? Do you have an extra disk drive appearing in the computer?
I just "fixed" this issue by performing a hard reset (power off then press both volume buttons for a couple of secs until you get the confirmation screen).
Warning: It does erase all your settings, apps and files that aren't on the SD card, but contacts, photos, messages and the like can at least be synced using the Microsoft My Phone app.
After that, Device Centre/ActiveSync connects, and you can re-sync with myphone.
I was wondering if it was a dodgy registry value that caused the crash, but I'm no closer to knowing.
Oh yes: I did try all the options like "faster transfer" and DMA/IP Transport, etc. it was definitely set on ActiveSync mode, and I tried XP Pro/ActiveSync and Win7 Home/Device Centre. And I tried turning the firewall off!
Thanks for your reply guys.
@kilrah:
Yes I already tried to uncheck the checkbox below activesync usb mode.
Also, I have double check I am in activesync mode and not usb disk.
@mpaxton:
I know a hard reset would probably solve the problem but since I have to activesync everyday, it is not a long term solution. I really need to find what is the problem.
I had a similar problem which ended up being a faulty usb connector in the phone which HTC replaced pretty quickly (8 days).
http://forum.xda-developers.com/showthread.php?t=590517
I had hard set without success and reflashed roms too.
Also of note, it was charging fine, just not connecting...
Finally !!!!
Thank you for your reply but I finally figured out my issues (actually there was two issues).
1/ Some services were not running so by using this tutorial (http://www.pocketpcfaq.com/faqs/wmdc/services.htm thanks a lot to the author) I managed to find the services required which were not running.
2/ My second issue is the silly part. Since I have an ultra portable laptop (Sony Vaio P), when I am at home, I access it using "Remote desktop" from my desktop at home so that I can enjoy the big screen and bigger keyboard without having to plug anything to the laptop. And it looks like, if I am connected to the laptop on remote desktop and plug the HD2, nothing happen in windows mobile center, like if it isn't connected. But when I am on the laptop (and after sorting out the services issues I mentioned before), it works perfectly fine. So touch wood it will carrying working but for now it is working fine even after setting up the online sync with the Exchange server.
Not sure if number 2 is a actually a bug or a security restriction but maybe I can send my bill to Microsoft for the hours of testing
jchoco said:
2/ My second issue is the silly part. Since I have an ultra portable laptop (Sony Vaio P), when I am at home, I access it using "Remote desktop" from my desktop at home so that I can enjoy the big screen and bigger keyboard without having to plug anything to the laptop. And it looks like, if I am connected to the laptop on remote desktop and plug the HD2, nothing happen in windows mobile center, like if it isn't connected. But when I am on the laptop (and after sorting out the services issues I mentioned before), it works perfectly fine. So touch wood it will carrying working but for now it is working fine even after setting up the online sync with the Exchange server.
Not sure if number 2 is a actually a bug or a security restriction but maybe I can send my bill to Microsoft for the hours of testing
Click to expand...
Click to collapse
It is probably the setting for RDP on your desktop computer.
You can choose to share local devices and resources:
"Other Supported Plug and Play (PnP) devices"
Hi all
I have 2 x HD2s configured for ActiveSync with our SBS2003 server. Everything works fine when connected to my laptop via USB or when connected to WiFi (whether at my office or at any remote site unrelated to my local LAN). However, once I am using my data connection I experience the following issue which I have narrowed down through lots of trail and error:
When an email of approx 4k and above arrives I can see ActiveSync trying to sync and it then fails with an error code of 0x80830002. ActiveSync will then never reestablish a connection unless I either remove the particular email from my Outlook inbox, or, I connect to any WiFi connection.
If I set the download limit to 1k, it never fails and I simply receive a trunkated version of the email. However, if I select to download the remained of the text it fails again.
The issue is related to the size of the text within the email as attachements can be downloaded fine.
I have been on to T-Mobile as this feels like a carrier problem as I only experience it when using mobile data connection but they haven't come up with anything.
I'd really appreciate any help you can offer as this is driving me mad!!!!!
Many thanks,
Tom.
I seem to be having similar problems
Which all started in Mid April. I too am on T-Mobile.....
Though e-mails in excess of 4k have been syncing when OTA is actually working. I hope an expert out there has an idea of what may be wrong!
Niall
Hi Niall
I should have posted my solution back here.
I thought (mistakenly) that my SBS2003 box was running service pack 2. It wasn't.
Went to the Microsoft updates website, allowed it to download and install and hey presto!!!
Also, I have noticed that on occasion, for example if the SBS loses its internet connection, that ActiveSync does not reestablish. Simply terminating it in WM task manager causes it to restart and then its fine.
Hope this helps.
Thanks for the suggestions. We're on Exchange 2003 SP2 already.
Terminating Activesync in the Task Manager on the phone doesn't help either. The only way to "restart" OTA syncing is to do a USB laptop sync. With SSL it falls down eventually with "Waiting for Network". Without SSL it lasts longer before falling down with error 0x80830002.
I do still wonder if it's related to us changing ISP for head office, but then surely the iPhone or WM6.1 device would also fail?
Niall
Our company changed its policy and one can only connect company paid for Crackberries to our Exchange servers. We came in last week to find we all had new login IDs and users on our laptops. That said I had to try it anyways with my HTC AT&T Tilt 2 to connect to MS Outlook to repopulate my contacts and calendar.
Here is what I found: I can establish a partnership between my WinMo 6.5 phone and laptop and sync my contacts and calendar, but after I disconnect my phone my 3G data connection via AT&T's MediaNet connection is broken. Even if I reboot or reset my phone I cannot establish a data connection. The 3G icon is there, but you get the error message that it cannot connect anytime the phone attempts to send/receive data. Better yet, after 3-5 hours the phone even then loses its ability to connect to a phone network! To fix the phone I have to restore from a backup I made before establishing the new partnership (thank god for SPB Backup!). I've reproduced this test case 4 times now and have narrowed it specifically to establishing the partnership with the laptop and doing a sync with the local contacts and calendar entries in MS Outlook.
Questions:
1) How does ActiveSync deliver a poison pill that disables my data connection? How does this manifest itself hours later in to turning the phone in to a brick?
2) Is there something I can do to block this from occurring on my device if I still wish to connect to my work laptop via the USB cable. I know I can delete the partnership, but hell, I'd still love to at least sync my contacts and calendar...
Thanks,
-Mark
Let me say up front I am not a BlackBerry user by any means, but I may be able to offer assistance with policy related stuff...
Do you have your phone joined to your work domain? If yes, try taking it out of the domain and re-synching with the laptop.
Regarding the data connection loss, do you know if you are getting any proxy settings pushed to the phone from the company network?
Your situation sounds odd for sure, but if it comes down to it, ask the IT department to see what they did. Technically it is your piece of equipment and you could have contact information in there that is personal so they should be able to allow you to get the info off the system somehow...
A BlackBerry expert might be able to offer a bit more info than my grabbing at straws...
Just a question, did you conected to the exchange server directly (you need to put your exchange server address and your user/psw to do that) or you just sync with your PC outlook?
If you did the first, yes, they can deliver a poison pill named as 'Exchange policies'. There are hundreds of different things they can disable on your mobile:
http://technet.microsoft.com/en-us/library/bb123756(EXCHG.80).aspx
If you just sync with your PC outlook, you should not get any problem.
In order to disable the server policy, you need to open the activesync icon, click the options and erase the exchange server.
If it does not work, do a hard reset.