Database Users

O2 Exec and Activesync 4

Just about to open Windows (on the top floor) and throw this thing through it!
Been waiting for months to upgrade to exec from xda2s, and 18hours after opening the box i'm ready to junk it. Cannot get it to sync at all. Read all the forums, zone alarm off, norton off, tried running as4.1, and still i'm getting dizzy watching this little green wheel going round and round and round and round and round..... 'connecting'
Does anybody have a work around or managed to get it to work. Without this facility the units useless to me, apart from maybe a quick £300 quick profit on ebay.
Help please.

I had a simlar problem, until I reluctantly ditched all my other Active sync partnerships (like my xda2 PPc partnership). then created a new partnership and it worked fine.
Good luck

Hi, Stupid question, but where do the older profiles live on my pc? I've looked in the activesync folder but no clues.

Open Avtivesync, go to file, click on mobile device, check and see what devices you have listed. then go to Delete mobile device.
This realy was a quick fix for me , you should be able to have multiple patnerships, perhaps some one else could suggest a better solution.

Thanks for your advice, but it looks as though I had deleted all previous profiles when I did a clean install of as4.1, and still getting dizzy!
Thought about calling O2, but quickly realised I would have better luck just ringing a random number out of the phone book.
I've tried every combination in the connection settings box, still no joy.
Need a solution soon before I reach for the Scotch and Razor Blades.

I've completely given up with this thing. Managed to get it back in the box (which was a minor challenge compared to getting Activesync to work), somebody please save me from ebay.

Do you have you Exec running in Corporate mode? I found that in this mode it won't sync; you just get "Connecting"...and nothing.
I switch to basic or personal and it syncs with no problem. Myabe this will help.

If the machine you are trying to sync with is connecting to an Exchange Server then you will have difficulties.
Try syncing the calendar, contacts and tasks direct with the exchange server and do the rest (notes etc) with the laptop.
Activesync 4 is so rubbish I have resorted to wirelessly syncing direct to my exchange server.
For a while I was cursing the Exec as I had just got my 2s just how I wanted it when I up(?)graded but I remembered that half the fun of these things is solving the problems, even if it doesn't seem like it at the time!

The main thing that you need to remember with ActiveSync 4.x is that you must install this before connecting your EXEC.
If you don't the microsoft driver gets installed instead (and in my case) no amount of deleting/reinstalling was able to recover the situation.
Whilst I was in the middle of that crisis I did some basic PD to try and rectify. Including
a) Installing AS 4.1 build 4807 on another system (preferably clean installed say XP SP2)
b) trying another cable
c) Doing a hard reset of your device and then repeating above steps
d) (obviously!) removing all previous versions of ActiveSync (also afterwards using regedit to remove any final traces and erasing C:\Program Files\Microsoft ActiveSync) and then re-installing
I have tried to include some Device Manager pictures of a working system for reference purposes

Throught trial, and very much swearing at the walls, I've discovered the following:
1. If I have the XDA Exec switched on and connect the USB cable, then I can guarantee a 95% failure to connect.
2. If I turn off the Exec, by the power-switch on side, then connect the USB cable and just leave ActiveSync to power everything up, then I have a 95% success connection rate.
On very odd occasions, I've had to disconnect the Exec, turn it off, then plug the USB in again. And once I restarted the workstation first - probably didn't have to, but was going for a coffee anyway.

AGHHH
I had a failure with Active Sync and established that it still worked with my 2 C500's so I phoned orange.
Eventually made my way to level 3 (highest) tech support to be told that its microsofts problem and that they have withdrawn Active Sync 4 until they can fix it.
I can connect to my M5000, move files via explore but as for the necessity of syncing itand my contacts..............forget it
MArk

Interaction with Outlook
My sync problems went away when I configured Zonealarm to allow it to connect.
I also had to install Outlook, which I don't like as I use Thunderbird for Email. Sync would still not work untill I allowed Outlook to be the default email client. However, I have not defined any accounts on Outlook and Thunderbird does not seem to mind.

Re: Interaction with Outlook
Romney said:
Sync would still not work untill I allowed Outlook to be the default email client. However, I have not defined any accounts on Outlook and Thunderbird does not seem to mind.
Click to expand...
Click to collapse
I got a whole series of increasingly depressed emails from my TBird install after I stuck Outlook on my lappie... In the end I had to take it out for the evening, give it some new extensions and what-not before it started talking to me again...

WM6.1 Blackberry Connect XDA Orbit 2 / HTC Touch Cruise

Hi
Has Anyone Got the BlackBerry Connect Software Working on this model?
Thanks
Leon

i'd be curious as well. there are a few threads on this, and it seemed like nobody got it to work on the touch cruise (though people have gotten it to work on their touch).
out of curiosity, why are people choosing to use blackberry connect rather than direct push through exchange? i find that my push is not 100% reliable and considered using blackberry connect to fix this. does anybody else have that dilemma?

Sadly, blackberry is the 'corporate standard', so I am stuck with it.
I have managed to get the Blackberry Connect client 4.0.0.97 to work 100% reliably on HTC touch p3450 with an HTC release ROM. As soon as you load a tweaked or cooked ROM the Blackberry Connect stops working.
Sadly the XDA Orbit 2 comes with an o2 cooked rom so it wont work with that, I have a call in to o2 support but I wont hold my breath
Yours
Leon

Seams to work
Hi,
I still new to Blackberry installation. (It´s my first go today)
From what I have read here a lot of people have problems.
I´ve successfully installed 4.0.0.97 of the Polaris with Bepes 0.58 Full German, eventhough the first installation required a compleate reset:
The HTC also connects to the server, but I get an error as my current user has been rejected. I do believe that our IT Admin needs to allow me to use the Blackberry function..... or am I still doing something wrong?
Unforunately I´ve noticed that the PDA has slowed down somewhat after installing the Blackberry connect
Look forward following this post.
Cheers
Rar9

Rar9 said:
Hi,
I still new to Blackberry installation. (It´s my first go today)
From what I have read here a lot of people have problems.
I´ve successfully installed 4.0.0.97 of the Polaris with Bepes 0.58 Full German, eventhough the first installation required a compleate reset:
The HTC also connects to the server, but I get an error as my current user has been rejected. I do believe that our IT Admin needs to allow me to use the Blackberry function..... or am I still doing something wrong?
Unforunately I´ve noticed that the PDA has slowed down somewhat after installing the Blackberry connect
Look forward following this post.
Cheers
Rar9
Click to expand...
Click to collapse
To get connected, you can talk to your IT amdin, but you don't need to if you also install the Blackberry Connect for Windows Mobile DESKTOP software. What that lets you do is obtain and assign a PIN to your Polaris/BBC setup. Its a security measure to tie your phone with your email account. Install BBC for WM desktop on a PC that has access to your email account (i.e. Outlook connecting to your Exchange server), then run the program. It generates a PIN, assigns it to your phone within BBC on the phone, then you should be good to go. Of course, you can talk to your IT guy otherwise.
And the slowdown is what I mentioned in the other forum. BBC uses LOTS of CPU, memory, and thus, battery.

Hi Rar9
If it connects then disconnects that is because you're using a non-release ROM (cooked).
On a succesful install of 4.0.0.97 you will see after reset a connection even if you havent configured desktop, it is required for the desktop proggie to do its work.
HTH
Leon

leondaphillips said:
Hi Rar9
If it connects then disconnects that is because you're using a non-release ROM (cooked).
On a succesful install of 4.0.0.97 you will see after reset a connection even if you havent configured desktop, it is required for the desktop proggie to do its work.
HTH
Leon
Click to expand...
Click to collapse
are u saying the ver 4.0.0.97 will work n you have it on your cruise?

I have not been able to get it to work and I have the stock HTC ROM. I'm not aware of anyone who's been able to get Blackberry Connect to work on this device. Check out this thread for others in the same boat:
http://www.sems.org/entry.asp?ENTRY_ID=276

Seven
leondaphillips said:
Hi Rar9
If it connects then disconnects that is because you're using a non-release ROM (cooked).
Leon
Click to expand...
Click to collapse
Leon,
I don´t think it would be related to the cooked Rom. I believe that it tries to get allowance from the server and then is rejected since I never had a blackberry so far with this company. Unforunately I still can´t confirm 100% since the our IT has not responded to my query.
In the meantime I have removed the BBconnect and use an Outlook Webmail connection via Seven (thanks for jomo25) which is very FAST and is not so hard on the CPU like BBConnect. I also believe its a lot easier to install.
(http://community.seven.com/forum/index.php?forum=true)
I´ll give it another try once I get more feedback from our IT and will post my results.
Cheers
Rar9

Yeah I don't think it has anything to do with the ROM. There seems to be an issue with the TC connecting to the Blackberry server and I have no idea why. That thread I sent earlier contains some theories on the topic. The BC software is a resource hog for sure.
Assuming you're using BC to connect to Coporate Mail (Enterprise) you can always try Microsoft Direct Push instead of Blackberry Connect to get to the Exchange server. A less optimal path would be to use IMAP to connect to the Exchange server. Then you would lose Push mail functionality

Well, we have 2 threads on the same topic. Some diff players in each, so I'll cross-post this one last time...Here's the other thread: http://forum.xda-developers.com/showthread.php?t=376917
Here's what I posted last: Seven is a "competing product" to BB's suite. If you are trying to connect to a BB server, then yes, you'd need BBC. But if you are just trying to get your email delivered, whether it be personal, POP3, IMAP, or you corporate email (Exchange) and you are behind a firewall, then Seven has a solution for you. Some more elegant than others. But it works. For me, it's the only option since we do use Exchange, behind a firewall, with no OWA externally accessible and BBC's software is very juice hungry.
As for getting BBC to work. Without knowing your exact setup, its hard to know what the issue is. First, make sure you are on the right data plan. I.e. for AT&T you MUST be on one of their BB data plans. Otherwise, you won't be able to get to the blackberry.net APN needed. Then, make sure you have the BBC for WM software installed on your phone and PC. (There are 2 programs, one for each) Then, connect your phone to the PC as in ActiveSync. Run the PC's program. You should notice that ActiveSync connection is severed, and the BB program should find the phone. Then go to assign a PIN and it should. Then it shoudl start to pull email to your phone.
The second software you need to run on the PC is here:
http://www.sems.org/entry.asp?ENTRY_ID=225
Click on the link for: ActiveSync_BBConnect_Desktop_Setup_4.0.0.17.zip
Because BBC uses a different APN than all other network access on your phone, and your phone can only connect to one APN at a time, you will not be able to do other things like surf via IE on your phone while you are connected to BBC (another reason it sucks).
----------
@ Rar9, I'm glad Seven is working for you. To be honest, if you can use the Seven software, you might just wanna stick with it. Seriously, BBC is a resource hog and a half as you seem to have experienced. You'll find it tough to go thru a day without battery dying, if your expereicne with BBC was similar to mine. I even have to run Seven's Workgroup Connector (which sends my work mail through my work PC) and I STILL prefer Seven over BBC for that reason. PLUS, you don't have to worry about switching APNs between your carrier's normal Internet gateway and the blackberry.net gateway. And of course th efinal bonus: the BB data packages tend to be MUCH more expensive than the normal data ones (up to 50% price diff with AT&T).
But try it again if you would like. Hope my instructions and links above for BBC help with that.

Ok so let me clarify. I am trying to connect to get my Exchange email through a Blackberry server. Microsoft Direct Push is not an option since IT doesn't enable it on the server. I do have the Blackberry Enterprise (not personal) plan from ATT. I do have the BC software. I do have an activation code from IT. The problem is the phone does not connect to the Blackberry server. Like I mentioned in my previous post if you check out that thread on SEMS others seem to have this issue. I am getting the same behavior this user in the UK is having:
"After installation and Blackberry Setup I get:
PIN pending
IMEI it's ok
IP address No connection
Status/Service Not Connected
By pressing the "register now" button I get Blackberry Edge connection, Status/Service shows Network Available then Data Tunnel Available and finally "Not Connected". During the process I can see an IP address in the Identity screen."
Appreciate your instructions but I just don't think it works. I've tried several different versions of the BC software, no cigar.

So, just to make sure, you have the desktop PC software also? If so, what happens when you connect the PC to the phone via USB? Doesn't it ask you to move the mouse around to generate a random and unique PIN? Oh, and did you force your phone to only use Edge? I beleive AT&T's connection to the BB APN is still only available via their 2G network, not 3G (not 100% on that last thing, but I do remember it was the case before).

You know, it's been awhile since I tried this, but honestly I remember trying like every permutation. I installed and uninstalled almost every version of BC. I tried it with Edge and/or 3G. I tried using the desktop software to generate the PIN and other times I didn't. I guess I can always try again. Have you gotten it to work on your device?

Not on my Polaris. I haven't tried. I did on my Kaiser and on my Hermes. I had the same issues you describe, til I used the desktop software to gen the Pin. I'd try on my Polaris now, except that I don't have the BB data plan and don't want to go thru the hassle with the AT&T guys again to get it added (esp since I won't keep the BBC software on my phone anyways for the aforementioned issues).
So, it may be that it doesn't work with the Polaris. the new versions of BBC should work, but they may not. If you feel you've tried it and did everything right, then it just may not work as you say.
I definitely don't want to steer you down a dead end. I was just checking to see if you did everything I thought needed to be done. Sounds like you had those bases covered.
Sorry!

hambola said:
Yeah I don't think it has anything to do with the ROM. There seems to be an issue with the TC connecting to the Blackberry server and I have no idea why. That thread I sent earlier contains some theories on the topic. The BC software is a resource hog for sure.
Assuming you're using BC to connect to Coporate Mail (Enterprise) you can always try Microsoft Direct Push instead of Blackberry Connect to get to the Exchange server. A less optimal path would be to use IMAP to connect to the Exchange server. Then you would lose Push mail functionality
Click to expand...
Click to collapse
Hi hambola
I read that the RIM Blackberry Connect was designed to work on Release / RTM versions of Windows mobile and has been coded to prevent it logging on via the global BES if the ROM is unsigned or if the device name is not in the list of allowed devices.
I can prove this using my trusty P3450. When loaded with a vanilla WWE RTM ROM Blackberry Connect 4.0.0.97 works fine. Load a cooked ROM and it connects then disconnects. This is the behviour I get on my polaris with its customised o2 ROM.
So it could be a clean ROM problem or it could be that Blackberry just havent allowed the Polaris to connect just yet.
Yours
Leon

xphobic said:
are u saying the ver 4.0.0.97 will work n you have it on your cruise?
Click to expand...
Click to collapse
No
4.0.0.97 doesnt work on Cruise but works fine on a vanilla ROM on P3450
Yours
Leon

jomo25 said:
Not on my Polaris. I haven't tried. I did on my Kaiser and on my Hermes. I had the same issues you describe, til I used the desktop software to gen the Pin. I'd try on my Polaris now, except that I don't have the BB data plan and don't want to go thru the hassle with the AT&T guys again to get it added (esp since I won't keep the BBC software on my phone anyways for the aforementioned issues).
So, it may be that it doesn't work with the Polaris. the new versions of BBC should work, but they may not. If you feel you've tried it and did everything right, then it just may not work as you say.
I definitely don't want to steer you down a dead end. I was just checking to see if you did everything I thought needed to be done. Sounds like you had those bases covered.
Sorry!
Click to expand...
Click to collapse
Hi Jomo25
no offence taken, thanks for your ideas - a second pair of eyes is always welcome!
Yours
Leon

hambola said:
Ok so let me clarify. I am trying to connect to get my Exchange email through a Blackberry server. Microsoft Direct Push is not an option since IT doesn't enable it on the server. I do have the Blackberry Enterprise (not personal) plan from ATT. I do have the BC software. I do have an activation code from IT. The problem is the phone does not connect to the Blackberry server. Like I mentioned in my previous post if you check out that thread on SEMS others seem to have this issue. I am getting the same behavior this user in the UK is having:
"After installation and Blackberry Setup I get:
PIN pending
IMEI it's ok
IP address No connection
Status/Service Not Connected
By pressing the "register now" button I get Blackberry Edge connection, Status/Service shows Network Available then Data Tunnel Available and finally "Not Connected". During the process I can see an IP address in the Identity screen."
Appreciate your instructions but I just don't think it works. I've tried several different versions of the BC software, no cigar.
Click to expand...
Click to collapse
Same behaviour on a cooked ROM on P3450 - exactly the same.

German O2 Orbit 2 will support BBC in May. This is what someone from O2 told me. BBC software sends the PDA ID (Pola200) the OS version and the carrier to RIM. If your PDA is not supported by RIM you'll get " pin pending".
So we have to wait.

Emails over approx 4k cause ActiveSync to fail

Hi all
I have 2 x HD2s configured for ActiveSync with our SBS2003 server. Everything works fine when connected to my laptop via USB or when connected to WiFi (whether at my office or at any remote site unrelated to my local LAN). However, once I am using my data connection I experience the following issue which I have narrowed down through lots of trail and error:
When an email of approx 4k and above arrives I can see ActiveSync trying to sync and it then fails with an error code of 0x80830002. ActiveSync will then never reestablish a connection unless I either remove the particular email from my Outlook inbox, or, I connect to any WiFi connection.
If I set the download limit to 1k, it never fails and I simply receive a trunkated version of the email. However, if I select to download the remained of the text it fails again.
The issue is related to the size of the text within the email as attachements can be downloaded fine.
I have been on to T-Mobile as this feels like a carrier problem as I only experience it when using mobile data connection but they haven't come up with anything.
I'd really appreciate any help you can offer as this is driving me mad!!!!!
Many thanks,
Tom.

Is your Exchange ActiveSync running over SSL?

Not at the moment. I'm just trying to get it going at the moment. I just don't understand how it can work in all situations appart from when on mobile data?

the_tominator_1982 said:
Not at the moment. I'm just trying to get it going at the moment. I just don't understand how it can work in all situations appart from when on mobile data?
Click to expand...
Click to collapse
If you're not using SSL then it's possible that it could have something to do with T-Mobile, but I don't know enough about them to say.
Does T-Mobile use a proxy for HTTP?
Do you know if they have a policy relating to syncing your phone(s) with Exchange?

Emails over approx 4k cause ActiveSync to fail

Hi all
I have 2 x HD2s configured for ActiveSync with our SBS2003 server. Everything works fine when connected to my laptop via USB or when connected to WiFi (whether at my office or at any remote site unrelated to my local LAN). However, once I am using my data connection I experience the following issue which I have narrowed down through lots of trail and error:
When an email of approx 4k and above arrives I can see ActiveSync trying to sync and it then fails with an error code of 0x80830002. ActiveSync will then never reestablish a connection unless I either remove the particular email from my Outlook inbox, or, I connect to any WiFi connection.
If I set the download limit to 1k, it never fails and I simply receive a trunkated version of the email. However, if I select to download the remained of the text it fails again.
The issue is related to the size of the text within the email as attachements can be downloaded fine.
I have been on to T-Mobile as this feels like a carrier problem as I only experience it when using mobile data connection but they haven't come up with anything.
I'd really appreciate any help you can offer as this is driving me mad!!!!!
Many thanks,
Tom.

I seem to be having similar problems
Which all started in Mid April. I too am on T-Mobile.....
Though e-mails in excess of 4k have been syncing when OTA is actually working. I hope an expert out there has an idea of what may be wrong!
Niall

Hi Niall
I should have posted my solution back here.
I thought (mistakenly) that my SBS2003 box was running service pack 2. It wasn't.
Went to the Microsoft updates website, allowed it to download and install and hey presto!!!
Also, I have noticed that on occasion, for example if the SBS loses its internet connection, that ActiveSync does not reestablish. Simply terminating it in WM task manager causes it to restart and then its fine.
Hope this helps.

Thanks for the suggestions. We're on Exchange 2003 SP2 already.
Terminating Activesync in the Task Manager on the phone doesn't help either. The only way to "restart" OTA syncing is to do a USB laptop sync. With SSL it falls down eventually with "Waiting for Network". Without SSL it lasts longer before falling down with error 0x80830002.
I do still wonder if it's related to us changing ISP for head office, but then surely the iPhone or WM6.1 device would also fail?
Niall

[Q] Exchange ActiveSync doesn't "wake up" after the weekend

Hi,
It might look like a stupid question but one of my users can't get past this problem so I would like to see if there's a solution.
So we only recently gave some users HTC Snaps to see how it adjusts to their needs, we have a hosted Exchange server (also has been only a few months) so we set-up ActiveSync on the Snaps to synchronize directly with the server.
It seems to work perfectly, it synchronizes following schedule (every 30min from 7AM till 6PM) on weekdays and doesn't on the weekend, but then on monday morning, it doesn't start the automatic syncing again as it should.
Almost every monday morning, the user comes to me at 8.30-9.00 to tell me he doesn't receive his mails. A simple Send/Receive in the mailbox or go to ActiveSync and press Sync starts the syncing again and everything seems to work fine during the rest of the week but still the user is annoyed that it won't sync as scheduled.
I can attest that it works perfectly on my own Windows Mobile 6.5 device (SE Xperia X1) although I do sometimes lose my synchronization schedule (but that could be related to some app I have or to the tinkering I do with it - if anyone has an idea though - the user doesn't do anything else on the Snap than make phone calls and check his mails and occasionally write one).
The Snap has the latest official updated ROM from HTC.
Any help is appreciated, thanks.
Jon

IP chabges
I have a similar problem. Your provider obviously changes your IP.
Go to Commmanager/Connections, disable Direct Push and enable it right away again. Sync will work afterwards until the next new ip.....

We don't use Push as it seems to work worse than with a fixed schedule.
I will check for the IP if I have the opportunity but I don't understand why that should be a problem (you do mean the device IP, right ? Our server IP doesn't change).
And the problem doesn't appear every single week ... So I think I'll just go with "That's the way it is" ...
Thank you for your help.