Related
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
DireArcticWolf said:
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
Click to expand...
Click to collapse
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
thanks
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
Thank you sssoooooo much, after a week of pulling my hair out I am happy to say I now have CM11 on my G2.
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Plain Water said:
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
markula78 said:
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
Click to expand...
Click to collapse
I just download the Freegee app ant updatet to 2.6.3.3 and it work, if any other with LG 802 have problems.
Good to know. Thanks for the post.
Sent from my LG-D801 using XDA Premium 4 mobile app
I'm currently running CM11 (02-07) with ART enabled. I'm thinking of upgrading to the current nightly, but I'm not sure if I need any special steps with ART.
I will be flashing the ROM manually because I need to modify the device number, so I'll probably be doing a reset before, which will of course reset back to Dalvik and remove all my apps.
Now my quesion is, can I backup my apps and user data while in ART with Titanium, and then restore them in Dalvik? I'm thinking of keeping Dalvik so I can flash stock remote and camera.
Thanks,
Vic
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
victorbrca said:
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
Click to expand...
Click to collapse
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
AndroidNoobeee said:
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
Click to expand...
Click to collapse
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
victorbrca said:
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
Click to expand...
Click to collapse
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
AndroidNoobeee said:
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
Click to expand...
Click to collapse
How did you flash recovery?
Sent from Tapatalk.
victorbrca said:
How did you flash recovery?
Sent from Tapatalk.
Click to expand...
Click to collapse
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
AndroidNoobeee said:
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
Click to expand...
Click to collapse
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
victorbrca said:
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
Click to expand...
Click to collapse
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
AndroidNoobeee said:
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
Click to expand...
Click to collapse
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
victorbrca said:
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
Click to expand...
Click to collapse
It won't allow me because the thread is only for developers.
Direct download
Download page with all nightlies
For now, there is no network on XT1033.
Do you tested if everything works ?
Eurofighter_ty said:
Do you tested if everything works ?
Click to expand...
Click to collapse
No, not yet
We need XT1033 testers.
I always get stuck at cyanogenmod logo!
Any one else stuck?
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Just wait. It took 5 minutes for the first boot
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
ohn42 said:
Just wait. It took 5 minutes for the first boot
Click to expand...
Click to collapse
SaurabhSandav said:
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
Click to expand...
Click to collapse
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
zpmarcos said:
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
Click to expand...
Click to collapse
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Xt1032, latest twrp, bootloop.
SaurabhSandav said:
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Click to expand...
Click to collapse
what TWRP version? sorry but Im stuck :/
zpmarcos said:
what TWRP version? sorry but Im stuck :/
Click to expand...
Click to collapse
TWRP 2.8.3.0
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
sim card is not working on xt1033 but hotspot is working
any working recovery for moto g gpe 5.0.1..? so that we can try this this rom..
ohn42 said:
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
Click to expand...
Click to collapse
Thank you sir, you are the man!
Worked for me after 3 hours trying hahaha
I can't flash it error in TWRP E: can't mount /system. Any solution??
Is dual sim working or not
Tap-a-talked from the MOTOG
Flashed with philz,works like a charm,stablest ROM for moto g.
xt1033 sim card not working
I tested the cm12 official version for xt1033.The sim card is not working ...If anyone else flashed it and its working please post a reply....
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
lootrooter said:
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
Click to expand...
Click to collapse
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
bftb0 said:
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
Click to expand...
Click to collapse
It was just a "hlte" vs "hltevzw" error, thanks
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Old 4.4 rom on new vzw bootloader
bishop0114 said:
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
how to install
themrgoats said:
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
Click to expand...
Click to collapse
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
dat ka said:
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
Click to expand...
Click to collapse
TWRP error 7 typically means you're trying to install the zip onto the wrong device.
Sent from my SM-N900V using Tapatalk
Yes if you are using the hltevzw twrp then just flash the hlte generic twrp and u can flash roms that don't require the hltevzw twrp to see the right rom is version is being flashed.
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
dat ka said:
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
Click to expand...
Click to collapse
I don't think so but was wondering since we have an unlocked bootloader, can we downgrade to a developer 4.4.2 rom and then install the cm11?
Sent from my SM-N900V using Tapatalk
is there any custom roms for this build expect MIUI ??
I have tried all of them RR ,cyanogenmod 12,13,14 nothing works on this build have anyone tried other custom roms?
Those ROMs should work regardless of your build. I have a European G7-L01 and I'm running Lineage and it's stable.
Sent from my G760-L01 using Tapatalk
shweeney said:
Those ROMs should work regardless of your build. I have a European G7-L01 and I'm running Lineage and it's stable.
Click to expand...
Click to collapse
I have tried everything thing every time i tried to flash a rom it gave me errors
Is that a root thing ?? Your device have to be rooted or not because i flashed a twrp recovery without rooting it seems all fine i can backup restore but when it comes to flashing other ROMs excepted​ MIUI 8 every other rom give me errore
Help aprricited
Thanks
are you using MParus's custom version of TWRP?
shweeney said:
are you using MParus's custom version of TWRP?
Click to expand...
Click to collapse
I am using TWRP V 2.8.7.0
Every time i try to flash a rom i came across this error (error executing updater binary in zip) and it failed
I had similar errors with v2, this is the TWRP I'm using:
https://www.androidfilehost.com/?fid=529152257862699744
shweeney said:
I had similar errors with v2, this is the TWRP I'm using:
https://www.androidfilehost.com/?fid=529152257862699744
Click to expand...
Click to collapse
Thanks a lot mate now its looking all alright i just flash a rom without errors :good: