Database Users

[CWM] [TWRP] Easy Recovery install for Find 5

I first want to note that none of this is my work, I'm simply sharing with the community with the permission from the creator of this tool. All credit goes to kamma for his port of TWRP here and Derek from the OPPO forums for bringing CWM, and of coarse JonaBustos for making this great tool for us to use!
Easy Recovery install for Find 5!​
Prerequisites:
- Computer
- Drivers for Find 5 installed
- That's it!
I, nor any of the parties whose work you decide to use are not responsible for anything you do to your phone ...ENJOY!
**This is simply a copy and paste of the original post over on the OPPO forums HERE
Friends OPPO community
I made a modification of some files and take the work of other users as Derek and Kamma, and make a easy installation of TWRP Recovey and CWM Recovery.
HOW TO:
- You only need to have installed the drivers from our OPPO FIND 5.
If you dont know how, can see this article How to install drivers for any Android. (I use this for all devices)
- Download the attachment and unzip wherever you want on your PC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- If you want to install TWRP RECOVERY by kamma
Please run the "1 RUN THIS FILE TO INSTALL TWRP.bat" and follow the prompts.
- If you want to install CWM RECOVERY by DEREK
Please run the "2 INSTALL FILE TO RUN THIS CMW.bat" and follow the prompts.
DOWNLOAD

Things are starting to move along for the Oppo Find 5. TWRP and CMW at the same time! This is very nice start, cant wait for some custom kernels. I see more and more roms are starting to pop up on here and http://www.oppoforums.com/

drvsbsm said:
Things are starting to move along for the Oppo Find 5. TWRP and CMW at the same time! This is very nice start, cant wait for some custom kernels. I see more and more roms are starting to pop up on here and http://www.oppoforums.com/
Click to expand...
Click to collapse
Where? Only ROM I see available is the deodexed stock ROM and a half working CM ROM..?
Sent from my X909 using Tapatalk 2

http://files.ngvincent.com/android/oppo-find-5/misc/easy%20recovery%20install%20for%20find%205_1.rar
Here's the Mirror!

n1ck75 said:
http://files.ngvincent.com/android/oppo-find-5/misc/easy recovery install for find 5_1.rar
Here's the Mirror!
Click to expand...
Click to collapse
Thank you.. I'll add it to the OP later today!
Sent from my X909 using Tapatalk 2

strange
hi
i just installed CWR all went ok the give me the usually option with Find circle in the middle...thanks a lot
BUT usually we have CWR icon...but nothing and when i try to go into recovery i just get the oppo options?
any help will be appreciate
Sent from my X909 using Tapatalk 2[/QUOTE]

gerardo66 said:
hi
i just installed CWR all went ok the give me the usually option with Find circle in the middle...thanks a lot
BUT usually we have CWR icon...but nothing and when i try to go into recovery i just get the oppo options?
any help will be appreciate
Sent from my X909 using Tapatalk 2
Click to expand...
Click to collapse
[/QUOTE]
I'm not sure I understand the problem.. is the recovery not sticking after a reboot? So it works at first and then reverts to normal recovery?
Sent from my X909 using Tapatalk 2

yes you exactly alright
revert to normal recovery
I'm not sure I understand the problem.. is the recovery not sticking after a reboot? So it works at first and then reverts to normal recovery?
Sent from my X909 using Tapatalk 2[/QUOTE]

gerardo66 said:
yes you exactly alright
revert to normal recovery
I'm not sure I understand the problem.. is the recovery not sticking after a reboot? So it works at first and then reverts to normal recovery?
Sent from my X909 using Tapatalk 2
Click to expand...
Click to collapse
Ok, it looks like the issue is with boot.img it appears to reflash the stock recovery on reboot. Its been talked about in the oppoforums and there seems to be an easy fix using adb shell
Use adb shell to disable it, but you need to have root. Here are command lines :
Code:
adb shell
su
mount -o rw,remount /system
cd /system/etc
mv install-recovery.sh install-recovery.sh.old
exit
exit
adb reboot
Recovery should now stick.
I found this too: http://www.oppoforums.com/threads/cwr-installed.1374/#post-21980
Sent from my X909 using Tapatalk 2

worked awesome! thank you very much.
other methods seem not to do the trick.

I just flashed the new boot.img and the phone now bootloops. wth..

thanks, worked for me, although the cwm is tiny

Hi guys. I know this isnt the place to ask these questions, and hope someone can guide me to the correct place. Thanks in advance.
My find 5 previously a chinese version color os, android 4.2.2. After installing the international version en_x909 rom i get a restart/soft restart asking to enter sim pin every minute.
The network always shows/gets edge line/symbol which is not 3G or H/H+ which the area is HSPA.
T28#HOX

oppo mirror 3
How to create cwm/twrp for oppo mirror 3?
Please tell me. Show link and tutorial. Thanks.
Send via [email protected]

Android L Preview Build Released (Links)

http://developer.android.com/preview/setup-sdk.html#top
It's up guys!

Downloading now.
I'll edit this once I get it running with how to do it and everything even though I assume you guys know what you're doing.

Dark69Slayer said:
http://developer.android.com/preview/setup-sdk.html#top
It's up guys!
Click to expand...
Click to collapse
factory img. are up!!!!!!:good::good::good::good:
http://storage.googleapis.com/androiddevelopers/preview/razor-lpv79-preview-d0ddf8ce.tgz

Dirty flashing ended up in a bootloop for me it didn't boot for like 10m will try clean install
---------- Post added at 07:57 PM ---------- Previous post was at 07:56 PM ----------
It didn't even show the Android is updating window (and keep in mind it's also art so it might result in longer fist boot time

As usual, DEB left behind!.

I flashed, tried dirty no go, stuck in forever animation. wiped and reflashed. Its booted setting up now.

Build number: LPV79
boot.img is different to KTU84P
bootloader is identical to KTU84P
system & userdata files... have a guess
Just fastboot flashed the image onto my N7 without erasing userdata, appears to be boot-looping as previously mentioned in this thread.
New encryption passphrase screen though!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Performing a full flash now...

flashable zip
can someone make a flashable zip please

made-in-tirol said:
can someone make a flashable zip please
Click to expand...
Click to collapse
Judging by the experiences of others in the thread so far, don't expect to be able to flash this over 4.4.4 without ending up in a boot-loop; so just backup your data and use the factory image.

made-in-tirol said:
can someone make a flashable zip please
Click to expand...
Click to collapse
I'd like one too because I'm at work no access to fastboot.
Sent from my XT1060 using Tapatalk

Can someone confirm this works fine on flo? I see images for razor only?

Legacystar said:
I'd like one too because I'm at work no access to fastboot.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
All of you asking for a flashable zip, use the toolkit to make it unless you can't use the toolkit aswell.

doombox414 said:
Can someone confirm this works fine on flo? I see images for razor only?
Click to expand...
Click to collapse
Razor is flo. Razor is the device name, flo is the name of the circuit board.

doombox414 said:
Can someone confirm this works fine on flo? I see images for razor only?
Click to expand...
Click to collapse
Razer = flo
Sent from my Nexus 7 using Tapatalk

Just completed flashing System Image.
Initially Stuck at boot animation for 5 minutes.
Powered off tablet by holding power button. and powered on successfully booted
Installing apps now. but i am seeing some lags even when accessing play store

Just used the flash-all.bat through fastboot and it worked perfectly. If you dont have the PATH variables set up it wont work but the commands you need if you place the bootloader.img and the image.zip in your platform-tools folder are:
fastboot flash bootloader bootloader-flo-flo-04.02.img
fastboot reboot-bootloader
fastboot -w update image-razor-lpv79.zip
Took awhile to start up but it was all fine. running it through the paces now.
This will wipe userdata as well, just as an FYI.

username4this said:
All of you asking for a flashable zip, use the toolkit to make it unless you can't use the toolkit aswell.
Click to expand...
Click to collapse
Flashable zip would be nice for us using multirom.

I flashed it. I thought it might have bootlooped, so I left it for a while just in case and it booted fine. Is the circle key supposed to be home as it's broken on my dirty flash?

dobbs3x said:
Flashable zip would be nice for us using multirom.
Click to expand...
Click to collapse
We know, you've said it twice now!
Sent from my Kang'd Nexus 7 (2014) using Tapatalk. My mobile is a Linaro & SM CM11 run Galaxy S3.

username4this said:
All of you asking for a flashable zip, use the toolkit to make it unless you can't use the toolkit aswell.
Click to expand...
Click to collapse
Is there a toolkit I can use on mobile because I don't have access to my PC till later
Sent from my Nexus 7 using Tapatalk

[Guide] Unlock the bootloader

Tested on PLK-L01 from Germany.
Download the following file:
http://rootjunkysdl.com/getdownload.php?file=Huawei%20P8%20Lite/Huawei%20Product%20ID%20Generator.exe
Insert you IMEI1 and choose "HUAWEI Y300-0000" as model.
Copy the product ID.
On the following picture it is in german, but on the page it is described in english which information you have to enter.
Enter the information on following page: http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
You have to login via Facebook to get the code and it only works with facebook.
Every Facebook account can unlock two devices every six months.
You will get the unlock code marked red.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did you tried also to flash something? (Root or xposed)

Piemo said:
Did you tried also to flash something? (Root or xposed)
Click to expand...
Click to collapse
Not until now, but if you have something reliable to flash for rooting I will try it.
There was the guide for rooting the Honor 7, but I don't know if it is only for the chinese version?

Aurevo said:
Not until now, but if you have something reliable to flash for rooting I will try it.
There was the guide for rooting the Honor 7, but I don't know if it is only for the chinese version?
Click to expand...
Click to collapse
Actually I've seen only that one, dunno if it would work. I'm like that my order is "waiting for stock" so other can try for me. XD

Worked for me
Piemo said:
Did you tried also to flash something? (Root or xposed)
Click to expand...
Click to collapse
This method worked for me, so thanks to OP.
As fastboot oem get-bootinfo shows the Bootloader as unlocked.
I flashed a Chinese TWRP from the guide I found elsewhere here. It definitely boots into TWRP and everything works inside TWRP, albeit in Chinese.
Unfortunately, I'm now in a TWRP bootloop and can't get out of it.
I don't have a stock ROM/recovery to re-flash, so I'm hosed until one appears online.
Model PLK-L01

philipcraig said:
This method worked for me, so thanks to OP.
As fastboot oem get-bootinfo shows the Bootloader as unlocked.
I flashed a Chinese TWRP from the guide I found elsewhere here. It definitely boots into TWRP and everything works inside TWRP, albeit in Chinese.
Unfortunately, I'm now in a TWRP bootloop and can't get out of it.
I don't have a stock ROM/recovery to re-flash, so I'm hosed until one appears online.
Model PLK-L01
Click to expand...
Click to collapse
Try the tutorial on gizdev!

haasgo said:
Try the tutorial on gizdev!
Click to expand...
Click to collapse
Is it useful to try it without an recovery image available? Some other user tried it and is in a bootloop now without the possibility to recover.

I also slashed beta-supersu, using the Chinese twrp. I didn't reboot in between flashing twrp and supersu. Maybe I should have.

Thanks!
Works perfect for me

What to do with the unlock code? I mean where to enter it?

Using your tip, I made this http://androidmtk.com/unlock-bootloader-of-huawei-honor-7

rahul964 said:
Using your tip, I made this http://androidxda.com/unlock-bootloader-of-huawei-honor-7
Click to expand...
Click to collapse
I get stuck on the step 10: after I fill everything out, it says "Sorry, you must use a phone account to submit this application."

I had this too. I needed to log in at the first step with a Facebook account. Basically Huawei want a record of who they've given codes to.

philipcraig said:
I had this too. I needed to log in at the first step with a Facebook account. Basically Huawei want a record of who they've given codes to.
Click to expand...
Click to collapse
Yes, it worked.
Did you figure out how to get out of the bootloop? Did you successfully root it?

pappapishu said:
Yes, it worked.
Did you figure out how to get out of the bootloop? Did you successfully root it?
Click to expand...
Click to collapse
Yes, and yes.

philipcraig said:
Yes, and yes.
Click to expand...
Click to collapse
Okay, but the "bootloop part" is necessary, isn't? Did you fix it thanks to duky_duke's post?
http://forum.xda-developers.com/showpost.php?p=62737969&postcount=17

pappapishu said:
Okay, but the "bootloop part" is necessary, isn't? Did you fix it thanks to duky_duke's post?
http://forum.xda-developers.com/showpost.php?p=62737969&postcount=17
Click to expand...
Click to collapse
Yes. Though mine seemed even more complex. I couldn't boot into the bootloader that way.
What I found is that via some combination of volume/power keys and having power plugged in or not, I finally:
* did a boot into safe-mode
* discovered I was rooted
* used to to install ROM manager
* rebooted, out of safe mode
* ran ROM manager
* rebooted to bootloader
And then did what dukey said.

strange i have tried to log using facebook button but it keeps sending me the '"Sorry, you must use a phone account to submit this application."'
any ideas?

Hi,
I got stuck when posting my numbers with the following answer:
We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks.
Click to expand...
Click to collapse
Has anybody else got stuck here or knows how to get around it?
I have not received an answer to the mail I sent them yesterday - I hope somebody replies at all
lippl

The .exe linked in the first post is not required to determine the product ID. It can be determined using universal code *#*#1357946#*#* (which returns an 8-digit code as expected)
Further, the .exe linked in the first post does not get a clean bill of health at VirusTotal - nothing definitive but not clean. Anyone planning to use it to generate an unlock code should use reasonable caution, sandbox the application or (better) run it on a disposable VM.

LG H440n - LineageOS problem + cannot reinstall OS - HELP!

Hi there,
few months ago i flashed LineageOS 14.1 and so far it worked so good. BUT! Few days ago i find out that i can't pickup any phonecall - i can hear the sound of the call, but nothing is showing up on the screen. I did the factory reset, but nothing changed. So I decided to reinstall ROM. And there is a problem. Coz of the 7.1.2 Lingeage Androig version i can't root it by kingroot. Tried to use LG UP and LG FLASH TOOL - to change rom, its not finding out my phone at all (the pc is recognizing it fine - all drivers are up). Got the TWRP on my phone, downloaded c70n - but without root how am I supposed to flash recovery (flashify is not working). Got no idea what to do.. Please help, get me some instructions how reinstall rom (even to stock one) that may work
PS. Sorry for my bad english.

LeCezar said:
Hi there,
few months ago i flashed LineageOS 14.1 and so far it worked so good. BUT! Few days ago i find out that i can't pickup any phonecall - i can hear the sound of the call, but nothing is showing up on the screen. I did the factory reset, but nothing changed. So I decided to reinstall ROM. And there is a problem. Coz of the 7.1.2 Lingeage Androig version i can't root it by kingroot. Tried to use LG UP and LG FLASH TOOL - to change rom, its not finding out my phone at all (the pc is recognizing it fine - all drivers are up). Got the TWRP on my phone, downloaded c70n - but without root how am I supposed to flash recovery (flashify is not working). Got no idea what to do.. Please help, get me some instructions how reinstall rom (even to stock one) that may work
PS. Sorry for my bad english.
Click to expand...
Click to collapse
Which android version are you on ?

mayankjet said:
Which android version are you on ?
Click to expand...
Click to collapse
Its 7.1.2.

LeCezar said:
Its 7.1.2.
Click to expand...
Click to collapse
Can you boot into recovery ?

mayankjet said:
Can you boot into recovery ?
Click to expand...
Click to collapse
Not really. With volume down + power i can only do hard reset. With flashify i need root to do it.

LeCezar said:
Not really. With volume down + power i can only do hard reset. With flashify i need root to do it.
Click to expand...
Click to collapse
If your phone is not rooted then you can't do anything. You can also try kingroot to root nougat( not sure if it works on nougat )
If it doesn't work then you'll have to flash the lollipop again.

download adb and issue the command
"adb reboot recovery"
That might get you into recovery

Korelev said:
download adb and issue the command
"adb reboot recovery"
That might get you into recovery
Click to expand...
Click to collapse
But he said he had no recovery installed.

mayankjet said:
But he said he had no recovery installed.
Click to expand...
Click to collapse
If he's on lineageos he has to have twrp
The problem is that his version is probably the first one that has the bug that when you try to get into it using the key combination it just wipes the phone, that has been solved in official versions of twrp for h440 but the first one had that issue

Korelev said:
If he's on lineageos he has to have twrp
The problem is that his version is probably the first one that has the bug that when you try to get into it using the key combination it just wipes the phone, that has been solved in official versions of twrp for h440 but the first one had that issue
Click to expand...
Click to collapse
That is exactly what i got. So... I have to try with adb, get rom and gaps on memory and it shoudl work? Because i got no idea how to install lollipop right know, and as i said kingroot didnt work.

I got problems with getting ADB on. Installed java SE, SDK Tools and got this error. God I suck at this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

LeCezar said:
I got problems with getting ADB on. Installed java SE, SDK Tools and got this error. God I suck at this
Click to expand...
Click to collapse
Install it from this link
https://forum.xda-developers.com/showthread.php?t=2588979

mayankjet said:
Install it from this link
https://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
Hallelujah! It worked! Thank you everyone sa far ill stick with Ressurection Remix! THANK YOU SO MUCH FOR HELP!

LeCezar said:
Hallelujah! It worked! Thank you everyone sa far ill stick with Ressurection Remix! THANK YOU SO MUCH FOR HELP!
Click to expand...
Click to collapse
And update your twrp to the latest version.

LeCezar said:
Hallelujah! It worked! Thank you everyone sa far ill stick with Ressurection Remix! THANK YOU SO MUCH FOR HELP!
Click to expand...
Click to collapse
so you could enter into recovery using that adb command? great then do as mayank jet said and update twrp
also you can root nougat using supersu flashable or phh's superuser from twrp.

Updating from 10 to 11 with root

Ok, so I'm gonna do the update to android 11 now that it seems to be more stable. My question is, once I do that, and I keep root, is there a way to do a factory data reset and not lose root all together? I like to do a factory reset when doing a major update just to make sure things run as smooth as possible, but I'd like to not lose root in the process. Thanks in advance!

Root (aka Magisk) IMHO resides in the boot image, so a factory reset would not interfere with root itself. Of course you would need to reinstall Magisk manager (Canary) after the factory reset. Oh, and you need to be on Canary Magisk for A11 anyway - so if you do the update from A10 you need to make sure you are on Magisk Canary (Manager and Magisk itself) or it won't work afterwards...

s3axel said:
Root (aka Magisk) IMHO resides in the boot image, so a factory reset would not interfere with root itself. Of course you would need to reinstall Magisk manager (Canary) after the factory reset. Oh, and you need to be on Canary Magisk for A11 anyway - so if you do the update from A10 you need to make sure you are on Magisk Canary (Manager and Magisk itself) or it won't work afterwards...
Click to expand...
Click to collapse
Nope latest beta works great too. Canary isn't needed anymore.

imneveral0ne said:
Ok, so I'm gonna do the update to android 11 now that it seems to be more stable. My question is, once I do that, and I keep root, is there a way to do a factory data reset and not lose root all together? I like to do a factory reset when doing a major update just to make sure things run as smooth as possible, but I'd like to not lose root in the process. Thanks in advance!
Click to expand...
Click to collapse
I have guides for this and for 11-11 they're in the guides section.
Thoroughly tested.

Kollachi said:
Nope latest beta works great too. Canary isn't needed anymore.
Click to expand...
Click to collapse
So I just need beta magisk and the regular app? Cause I just installed the canary magisk manager and it's missing quite a few options like magisk hide and such. And I definitely need those.

dladz said:
I have guides for this and for 11-11 they're in the guides section.
Thoroughly tested.
Click to expand...
Click to collapse
That is a lot more involved than I was expecting this to be. I figured I could just retain root with an update the same way I always do.

imneveral0ne said:
That is a lot more involved than I was expecting this to be. I figured I could just retain root with an update the same way I always do.
Click to expand...
Click to collapse
It's 9 steps?
You need to remove modules, you will need to use the updated boot img and your won't have twrp to fall back on.
If you want to wipe after you'll need to set up then reinstall magisk then obtain your boot img, patch it and boot it then flash it directly.

dladz said:
It's 9 steps?
You need to remove modules, you will need to use the updated boot img and your won't have twrp to fall back on.
If you want to wipe after you'll need to set up then reinstall magisk then obtain your boot img, patch it and boot it then flash it directly.
Click to expand...
Click to collapse
It's not that, it's just that I usually used a pretty simple guide for updates and I didn't need to do anything on the computer for it to work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it because we're updating from 10 to 11 that these extra steps are needed? Sorry, I'm just curious is all.

imneveral0ne said:
It's not that, it's just that I usually used a pretty simple guide for updates and I didn't need to do anything on the computer for it to work.
Is it because we're updating from 10 to 11 that these extra steps are needed? Sorry, I'm just curious is all.
Click to expand...
Click to collapse
No not at all.
Tbh it's extremely similar.
Just that the way I've written it means you won't have issues, I'd rather cover bases in a guide than answer a 100 questions later.
If you have magisk functional already then you're halfway there.
I've updated the OP in my guide.
Some steps are informational

dladz said:
No not at all.
Tbh it's extremely similar.
Just that the way I've written it means you won't have issues, I'd rather cover bases in a guide than answer a 100 questions later.
If you have magisk functional already then you're halfway there.
I've updated the OP in my guide.
Some steps are informational
Click to expand...
Click to collapse
I installed the canary built of magisk from your thread, but there isn't an install button. ?
Edit: I went back to the beta build and it worked fine with patching.

imneveral0ne said:
I installed the canary built of magisk from your thread, but there isn't an install button. ?
Edit: I went back to the beta build and it worked fine with patching.
Click to expand...
Click to collapse
Good stuff..so what channel did you change it to.? Are you able to provide a version as someone has the exact same issue.

dladz said:
Good stuff..so what channel did you change it to.? Are you able to provide a version as someone has the exact same issue.
Click to expand...
Click to collapse
Just the beta channel. And I can once I get my phone working again lol. You straight up told me I was gonna need to use this to root my phone after a factory reset. And I went ahead and installed twrp anyway. Using the msm tool now to fix it lol.

imneveral0ne said:
Just the beta channel. And I can once I get my phone working again lol. You straight up told me I was gonna need to use this to root my phone after a factory reset. And I went ahead and installed twrp anyway. Using the msm tool now to fix it lol.
Click to expand...
Click to collapse
Lol no worries man. Glad you're up and running.
:good: