Hi guys, I know it's not the right section, but I can't open a thread on P8's one. I have a big problem with my phone. I bought it when it was in a bootloop; this guy tried to install Marshmallow and he failed it. I managed to roll back to b110 version and now I'm stucked. I can't install a higher version, the phone works (not fine; i can't receive calls, watch videos etc etc) but it works. i have the original IMEI; When I'm trying to install a higher version from local I get an error massage like: software install failed! get help from....and than it reboots back. I unlocked the bootloader too. What can i do? Sorry for my bad english, I hope to find some support from you guys.
Related
I bought ASUS Zenfone Selfie ZD551KL (ASUS_Z00UDB). I found my phone software was WW version but strange thing is the backpack of phone box was written it has installed CN version. However that time my phone was installed WW-1.13-user I guess. There was no OTA update options, so i never get any update notification.
After 1 days I saw ASUS release Android 6 for ASUS Zenfone Selfie ZD551KL. So i downloaded in try to installed it many was, after that my phone go into bootloop. Its been 15 days I still in stuck in same. Already tried most of methods to fix but no success. After that i tried to contact Regional customer support, when I asked about that issue, they asking for half of phone charge, also they can't ensure if it fix or not. If fix they asked that that amount if not then half of amount. So i back to home and searched again, I understand that my phone bootloder still locked. So i think for this reason all of my try going fail. Since ASUS has requirement to unlock bootloder is must be version 1.15 installed, this case my phone was 1.13. Also now I'm in stuck.
So Question is, is there anyway to unlock bootloader as I'm in stuck into bootlop?
I know I could ask this msg to ASUS support, since as they are so bushiness minded they wont reply my question.
Badly need help this case.
Thanks in Advance
Thanks God, I just fix it using 1.12 CN version, which file was not from official support. Now main problem is, How can I move to CN > WW. I need 1.15 WW version. Is there any way to move on WW?
Hello ...
I found today that i have z00udb and not z00ub.
I have no update option ... My wife phone ... She will kill me soon if didn't found a solution ...
I have 1.13 want to updat to 1.15 ...
I feel not fine if i do update to 6.0.1 ... I read too much problems after update ...
So please tell me what happened with you and if thede is any solution ...
Greeting .
Hi everybody
My Zenfone Selfie after a normal update (never modified) is in bootloop.
So I installed adb and fastboot and I flashed the twrp.
Then I tried in every way to flash a rom. I've tried both with official firmware and with various versions of cyanogenmod. Through fastboot and via adb sideload.
Even if seems to work, when I reboot I get the bootloop problem again.
As far as I can understand the problem it’s that I have the bootloader still locked. The official apk solution I guees it’s not applicable in my case. By fastboot oem unlock i get an error message (probably why i can not enable usb debug).
Do you know of other ways to unlock the bootloader or in general to flick my phone?
Thanks to everyone for the help
First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.
Hi to all
My name is Yarli and this is my first post on XDA-Dev.
I have a Huawei P9 Lite and I have a problem.
I did root on it following one of the 1.000 manuals on XDA. I unlock it contacting Huawei, and I downloaded like 4 or 5 different roms to test.
No one worked. Never. So even having a rooted cellphone I never could use it. I did the same with a Nexus 5 before, and I'm still doing it, actually. I like testing roms. But with this P9 Lite, no ways.
This was a second cell phone to play with so once I saw was impossible to put a damn Rom on it, I surrender. And kept it on a draw.
A few months ago I read Huawei was blocking the root access on its cell phones so I did the rollback and I installed a version of emui restored and downloaded from Huawei. Everything looks like working so I kept the cellphone clean: no google account, no apps, nothing. It looked ok. Youtube working fine, camera too, everything fine.
Last week. My girlfriend broke her cellphone. "Don't worry, I have one for you". So... I didn't. As soon as you try to set your google account the Play Store freezes and went back to the "insert account" screen.
I have a Huawei Attention Center close to my place. I took my cellphone there to check it like "Sorry, I put your software, officially downloaded from your website and my phone is no working right". And they say "You have to change the mother-****ing-board. 159€". For this price ¡I would buy another brand new cellphone!
So, the question:
What can I do?
Thanks for your collaboration.
Some info
Emui 4.1.1
VNS-L31C900B170
ANDROID 6.0
I dont know if this will help but, when I enter pressing the three buttons, on the emui recovery it says "Downloading package", bla bla bla,... and then "Software install failed" The update package does not exist, please dowload the package again" and I only can Reboot system now.
What the hell to do?
Thanks
yarlirut said:
I dont know if this will help but, when I enter pressing the three buttons, on the emui recovery it says "Downloading package", bla bla bla,... and then "Software install failed" The update package does not exist, please dowload the package again" and I only can Reboot system now.
What the hell to do?
Thanks
Click to expand...
Click to collapse
Hi Yarli,
i was wandering why you rollbacked, you could have chosen to do only unroot and
flash the stock recovery to keep having updates.
Maybe you misunderstood what happened on Huawei world.
They do not closed access to root, they closed access to website used
to request bootloader code.
During the rollback something is gone wrong and you have that firmware ( C900 ).
Maybe with a correct firmware you could solve that stucked situation.
Three buttons AKA dload is used to perform a forced update,
so you have to put a DLOAD folder in SD card with inside update.app
file extracted from FullOTA firmware.
Yep this could solve, i said could.
So if you choose to do what i'm posting here you assume all responsability
about you are doing with your device... it may simply not work or make things worse.
If you don't agree just ignore this post, if you want to try then answer my questions:
Have you already tried a factory reset ?
Wich region do you live ?
First of all: Thank you so much for your answer.
It seems I didn't get it right. At the end I wasn't using this p9 so much so I wasn't so deep on it. Now I see.
Let's see:
I have already try the factory reset, and the result is the same. The phone works, even if I put the sim card I can call and receive calls. But when I try to add my gmail account I can't. The systems gets out all the time. So no calendar, no mail, no fotos, no nothing related to my google account.
My region is Spain.
Again, thanks for your help
Dadditz said:
Hi Yarli,
i was wandering why you rollbacked, you could have chosen to do only unroot and
flash the stock recovery to keep having updates.
Maybe you misunderstood what happened on Huawei world.
They do not closed access to root, they closed access to website used
to request bootloader code.
During the rollback something is gone wrong and you have that firmware ( C900 ).
Maybe with a correct firmware you could solve that stucked situation.
Three buttons AKA dload is used to perform a forced update,
so you have to put a DLOAD folder in SD card with inside update.app
file extracted from FullOTA firmware.
Yep this could solve, i said could.
So if you choose to do what i'm posting here you assume all responsability
about you are doing with your device... it may simply not work or make things worse.
If you don't agree just ignore this post, if you want to try then answer my questions:
Have you already tried a factory reset ?
Wich region do you live ?
Click to expand...
Click to collapse
yarlirut said:
First of all: Thank you so much for your answer.
It seems I didn't get it right. At the end I wasn't using this p9 so much so I wasn't so deep on it. Now I see.
Let's see:
I have already try the factory reset, and the result is the same. The phone works, even if I put the sim card I can call and receive calls. But when I try to add my gmail account I can't. The systems gets out all the time. So no calendar, no mail, no fotos, no nothing related to my google account.
My region is Spain.
Again, thanks for your help
Click to expand...
Click to collapse
Hey, based on your firmware (B170) was expecting ASIA,
now i'm little confused because i can't find it for european versions.
Was your phone branded / unbranded one ? Do you remenber your last fully working firmware ?
VNS-L31CxxxBxxx ?
I've been trying to install Nougat on my P8-lite (ALICE). I started with ALE-02 B140 and following these instructions successfully upgraded it to ALE-L21 B170. Then flashed B560, followed by TWRP and finally B895. At some point in time the model number must have changed as it no longer reports ALE-L21 but hi6210sft. Despite this every thing works file. Radio and data works flawlessly too.
However when I flash any custom ROM - radio is intermittent and randomly turns off every so often for a minute or so (this includes voice, SMS and data). This makes the phone quite unusable
ROMs I tried are Android 6 (Lineage 13), Android 7 (RR, dots, AOSP) and Android 8 (RR) - and they all do the same. So I'm back on EMUI B895 - but would dearly love to get rid of it. Baseband version is 22.355.03.00.00
Any help or suggestions or questions are most welcome
Thomas.
Finally managed to fix it. Went to Settings->SIM cards->SIM1 Settings->Preferred network type and changed "GSM/WCDMA/LTE" to "GSM/WCDMA auto"
I have a huawei p8 lite ALE-L02 (alice) and im unable to upgrade to nougat . I am unable to unlock bootloader as the bootloader code website is no longer available. I will appreciate any help to upgrade to nougat.
I think you are late. Google around and have a look at https://forum.xda-developers.com/p8lite/general/unlock-code-t3830035
Well thanks anyway but my rollback keeps failing. My version is ALE-L02C190B584. The phone wont accept the rollback file. Thanks
Hey guys im new here, Essentially I got myself a G9 Plus. however its Chinese Branded with all there apps and no Google play store.
Ive looked around for a GLOBAL rom but cant seem to find anything. I however came across a NOVA plus that seems to be the same as G9 Plus?
Can someone confirm? ) if so what can I Install on this?
Ive never really flashed a phone before however very tech savvy , can some1 point me in the right direction ?
Thanks!!
Please help
Guys so I tried my hand this, I downloaded the Huawei firmware finder on the phone and followed it to download it directly to the phone via proxy. the update went through and then Failed on installation (( now it boots on recovery but im stuck , I tried SD card dload to try get it to manually update itself. the closest firmware I found was not the same model as my model itself it was MLA-UL00C17B363 thought it would work but when it installs via recovery it fails at around 40 or 50 percent....
my model itself is MLA-UL00_C17B170 ,
Am I doomed or can I salvage this situation , Please help!