Related
First of all, I may be posting this in the wrong section. But I desperately need your help on this.
I got a Jiayu S3, and couldn't not try to flash a custom rom on it, so I tried with "Pure AOSP V1 TF".
All went well, untill i found this app which was included with the rom, "Kinguser" (should be Superuser, i believe), which game me the option to toggle root.
At first and only time I opened this Kinguser app, option root was active. I did deactivate it, and reactivated immediately after.
As soon as i reactivated root, the privacy pin screen showed up.
I didn't set any PIN on my phone, so at first i thought it could be something like 1111 or 0000. Tried 5 times and it made me wait 30 seconds. Then tried another 3-4 times.
Here began the real mess: "forgot pin" (or psw) didn't show up, but at the time i didn't even know about that recovery option.
I didn't know what to do, so I just thought that a factory reset would certainly solve the problem, how couldn't it? Well, wiped everything, but PIN lock screen didn't go away.
So, wiping everything, I also deleted my gmail account from the phone, and I lost the possibility to lock phone and give it a new password (Android Device Manager). Too bad at the time I didn't know about this recovery option as well...
Now I'm out of ideas. I think I've tried every method I could find with a search of "Smartphone PIN locked". Tried with resets, plugins, deleting files with adb..
How do I unlock my phone?
little update: after a factory reset, for 2-3 seconds, it shows the default initial screen, but it doesn't last more that and i just can't do anything.
Now i managed to bring back the stock rom, but with that i lost the twrp recovery, and i can't find a way to make pc recognize the phone to reflash it.
It seems it's going worse instead of better...
I had just bought this Jiayu S3 and planned to bring it on holidays on wednesday, but i'm starting to think i won't be able to fix it before then
Did you have any resolution to this problem. I am currently sitting in the exact same boat. Did the factory reset, pass code screen still there, I didn't set a pass code. Basically hands tied, can't update firmware, guessing i'll have to get a new phone, but hoping maybe you found a miracle cure! ha! - Thanks for any guidance. - Arden (Seattle, WA)
Just flash another rom (stock/original) and start over.
How have you done that?
Can you help please?
I tried factory reset (volume plus+ power button), hard reset (volume- plus power button), update, and nothing works; I also went to two different specialized stores and they failed to find a way to reinstall the original Android version or a recent one.
Comparing the files with the factory version installed in the phone, the phone report identified three changes:
- a new file: /system/priv-app/7mK0T6e8Z5.apk
- the lost of a file: /system/app/com.android.fallen.apk
- and a modified file: /system/bin/debuggerd
AzulFogo said:
How have you done that?
Can you help please?
Click to expand...
Click to collapse
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Dior DNA said:
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Click to expand...
Click to collapse
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
latest sp flash tools is 5.1532
search needrom with "5.1532" will leed you to the download page
no link allowed here, so ...
for beta 10 from jiyau.de, search google with "jiyau.de Lollipop 5.1.1 - Beta 10 (14.10.2015)".
it will leeds you to the rom.
Good hunting
tuto sp flash tool
https://youtu.be/ztI8sc8MUNo
AzulFogo said:
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
Click to expand...
Click to collapse
see jaunedoeuf's answers
I would like to add: if you come from KK and go to LP, you must use firmware upgrade to update/adjust internal SD partition layout. Good Luck! if you succeed, and are happy with firmware, consider voting @ http://forum.xda-developers.com/android/general/firmware-jiayu-s3-t3212184 (almost 100 votes)
First, thank you for your great help!
With your suggestions, I managed to install Lolipop in my Jiayu S3S (upgraded from Kit Kat) - Xtreme ROM TF (JiayuS3-5.1Extreme1.1SP.zip).
However the problem remain... the phone still is asking for a PIN (that I never had put there, in first place)...
What should I do now?
you could try factory reset and are you sure its the phone asking for pin and not the sim card
First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.
Hello,
I just applied the latest update C432B185 on a 8 pro honor; it remains blocked at restart. Another user reports an identical problem on the FRANDROID site.
Do not apply this update because the problem is blocking; you will no longer be able to use your honor 8 pro.
Solution on hold.
Thank you
I have the exact same problem. I started the update, and put it back in my pocket. I grabbed my phone after a few minutes and blindly touched the fingerprint sensor and pressed where normally the home button is. Instead, I catched a glimpse of a black screen, a triangle and a button. The button was at almost the same spot as where the home button normally is, so I clicked it and my phone restarted. After that, the only thing my phone does right now is show the white Honor logo with a lightblue blackground.
I already tried everything that can be done, I think.
Restarted the phone 20 times, did a 'user reset', cleared the cache 20 times and did a lot of factory resets (sometimes stuck at 99%).
Nothing made my phone work again. I also tried to use eRecovery to 'Download latest version and recovery' but that only resulted in 'Getting package info failed'.
If someone has any clue to what can be done to revive the Honor 8 Pro again (or to see some kind of logs to view what's going on), please... help! :crying:
The topic on Frandroid that Pascal was talking about: forum.frandroid.com/topic/261525-mise-%C3%A0-jour-qui-plante-le-smartphone
Hello,
I have exactly the same problem with my honor 8 pro.
I can't use it anymore, the user reset is staying 99%
If someone has a solution...
Also had the update, tried everything, wanted to flash other rom but i haven't got my product ID to unlock the bootloader.
Worst part of all, there is no care centre in The Netherlands...
so what im suppose to do? not sure at all, eRecovery fails,
using the dload method fails.
nothing seem to work atm...
Thank you for sharing this. It's not released in India yet seems but disabled the auto download update over wifi feature just in case.
Also, I can't connect to the phone with ADB or fastboot. /adb reboot recovery returns error: device unauthorized. This adb server's $ADB_VENDOR_KEYS is not set and ./fastboot getvar all returns FAILED (remote: Command not allowed). HiSuite (never tried before) can't find my phone on OSX and crashes after 5 minutes.
No root, no unlocked bootloader. Also shows FRP is locked.
Same here (france) Factory reset doesn't work, dload method doesn't either and the WIFI update doesn't find anything so I'm stuck with no phone for the moment :'(
Same here (Poland). Phone is bricked, second visit in service within 2 months :/
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Same Problem with the Honor 8Pro update
Hi,
Same problem in the Netherlands, Brabant.
Just downloaded the update for the Honor 8Pro.
Tried everything, also the eRecovery, Same problem with the package Failure.
Also E-mailed to HiHonor for an sollution, nothing so far.
Somebody got any tip? Can miss my phone for work..
Greeting from Oss, The Netherlands.
Same problem
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
TheVeeeMan said:
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
Click to expand...
Click to collapse
Zelfde probleem hier en nu een onbruikbare telefoon...
Nog geen half jaar oud!
Ik heb net Honor gemaild .. even afwachten tot morgen..
Sterkte alvast!
Thank you for the warning!
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
I have explicitly chosen to not root or otherwise mod my phone just yet. Does this void your warranty? Right now, I can send it back to the supplier and they will fix it. Of course if something else is faster (supplier says max. 3 weeks) then I am happy to try, if it does not void my warranty.
EDIT: and also, how can I see which version I need? I don't know how for sure which version I have, and of course I can't get into the UI anymore. As I posted before, ADB and Fastboot don't give me any info.
OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
Hello,
that didn't work.
:crying:
Krystal666 said:
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Click to expand...
Click to collapse
Thank you.
I have made use of many Huawei phones in recent years (Mate 7, Mate 9, P8 Lite, P9 Lite) and Honor 8 Pro. I quickly realized that this update was blocking; it was common sense to inform users of the Honor 8 Pro in order to limit the number of service returns, unnecessary time wastage, etc.
This is our precious ...
Welcome
Here in Holland this morning the same problem.
Thanks for the Info. No update notice for my phone (in Germany). Hopefully Huawei/Honor will have stopped the update rolling out. Jeez, don't these updates get tested before they're released?
You can use Firmware Finder for PC to send an update for installation via erecovery with changing your routers DNS.
Erecovery is used in customer services to install manually sent updates only. That's why it can't find anything without sending an update to your device.
Hi All,
I'm trying to update the p9 lite VNS-L31C432B414 dual sim to the latest version B416.
The phone is always officially updated, but i tryed all 3 versions from firmware finder, with the *#*# 2846579#*# *
Select Project Menu > Software upgrade > SDcard upgrade method.
But when the phone restarts it begin to update and after a little progress it failed.
The same thing happens when i try it with the firmware finder app from playstore with erecovery, or dns method.
Any help would be appreciated, thanks!
Davidoff80
Davidoff80 said:
Hi All,
I'm trying to update the p9 lite VNS-L31C432B414 dual sim to the latest version B416.
The phone is always officially updated, but i tryed all 3 versions from firmware finder, with the *#*# 2846579#*# *
Select Project Menu > Software upgrade > SDcard upgrade method.
But when the phone restarts it begin to update and after a little progress it failed.
The same thing happens when i try it with the firmware finder app from playstore with erecovery, or dns method.
Any help would be appreciated, thanks!
Davidoff80
Click to expand...
Click to collapse
Firmware Finder
DNS/VPN method should be the best way to try this update.
The other only method that i know is to use Huawei Recovery Updater
but you should unlock the bootloader and flash a custom recovery first.
In the end it will be a bit difficult to re-lock the bootloader, never tried to do such a thing,
but you can keep it unlocked...
Good luck dude.
Cheers
Hi Dadditz,
Thank's for your response.
Last night i have tryed with a extra wifi router to change the dns number but even when the Firmware Finder app giving me the message that the B416 is registered for my phone, when booting in erecovery it installs the B414 FULL package again.
And with in the app proxy and dns method with firmware finder, the system update app from huawei gives me the sign that a update is ready to B416 with the release notes and all but when it starts it shows a checksum error or download fail.
I have registered the IMEI but do you know if it's maybe the problem with that its a dual sim so there a 2 IMEI numbers? or is the first one enough to register?
The tip for unlocking the bootloader i have searched on, but huawei has taking the unlock service down i understand, so the dc-unlocker2client program for 4 euro is the only option i think?
The main reason that i want to try the latest firmware is that people can't hear me good with this phone, i send the phone 2 times for repair and contacted the provider but the signal looks good.
Now i have factory reset the phone for the tenth time, i was thinking maybe the eset virusscanner interferes with the build in huawei/avast scanner but im not sure if that could cause it.
Thanks and have a nice day.
Hi all
I just unroot and unlock BL my phone yesterday. First i make downgrade (rollback 6.0) via dload method. Everything going very smooth and when my phone was version VNS-L31C432B160, then i'll get all newer updates via OTA (Finland), now my phone is B416
Davidoff80 said:
Hi Dadditz,
Thank's for your response.
Last night i have tryed with a extra wifi router to change the dns number but even when the Firmware Finder app giving me the message that the B416 is registered for my phone, when booting in erecovery it installs the B414 FULL package again.
And with in the app proxy and dns method with firmware finder, the system update app from huawei gives me the sign that a update is ready to B416 with the release notes and all but when it starts it shows a checksum error or download fail.
I have registered the IMEI but do you know if it's maybe the problem with that its a dual sim so there a 2 IMEI numbers? or is the first one enough to register?
The tip for unlocking the bootloader i have searched on, but huawei has taking the unlock service down i understand, so the dc-unlocker2client program for 4 euro is the only option i think?
The main reason that i want to try the latest firmware is that people can't hear me good with this phone, i send the phone 2 times for repair and contacted the provider but the signal looks good.
Now i have factory reset the phone for the tenth time, i was thinking maybe the eset virusscanner interferes with the build in huawei/avast scanner but im not sure if that could cause it.
Thanks and have a nice day.
Click to expand...
Click to collapse
Hey dude it's like you somehow downloaded B414 firmware and putted into
the internal memory or the SD card.
Check if you have that files and delete them, then try again with the update.
Don't know about your two IMEI, you have to check by yourself wich one would work...
About unlocking the bootloader, yes it is possible with the tip you wrote (dc-unlocker).
Before attempting to do anything try first with another sim and see if is the same as now
because if nothing changes maybe it's a hardware issue...
As suggested by @oltsuboy it's possible to downgrade to MM and re-upgrade
to N android version, you only need the correct packages..
I'm here to help you...
Have a good day..
Cheers
Hi guys,
I have tryed to downgrade to android 6, and that works, and then i get OTA to B370 and then B380 so i am android 7.0 again.
But now the OTA update find nothing, it stays on B380.
Before when i checked system update with HiSuite it says B414 is the latest official firmware, but now it says B380 is??
As far as i know i used only official updates with this phone, and i have wiped partion and system a lot of times.
And mostly there where 2 sim cards in it, i only put in SD card formatted first for the update.app
So i don't think B414 is floating somewhere, but i don't understand where it went wrong.
It's a non provider linked phone with a sim only abbo from the netherlands, i already asked a new sim card from the provider to test if the voice quality improves but it makes no difference.
I'm gonna wait a little maybe a update comes, when i put the B416 update on the sd card now and do force update VL+ VL- PW. the update fails after ten procent.
Maybe tommorow im gonna look to unlock the phone for 4 euro.
Thanks for the help!
Update: I have tried the DC Unlocker program.
And obtained the bootloader code, but what do do with it now?
Something says i did something wrong, because the options where:
Read unlock codes
Read bootloader code
Lock Bootloader
Erase Huawei ID
But no unlock bootloader, so i did read bootloader and copied the code.
Davidoff80 said:
Hi guys,
I have tryed to downgrade to android 6, and that works, and then i get OTA to B370 and then B380 so i am android 7.0 again.
But now the OTA update find nothing, it stays on B380.
Before when i checked system update with HiSuite it says B414 is the latest official firmware, but now it says B380 is??
As far as i know i used only official updates with this phone, and i have wiped partion and system a lot of times.
And mostly there where 2 sim cards in it, i only put in SD card formatted first for the update.app
So i don't think B414 is floating somewhere, but i don't understand where it went wrong.
It's a non provider linked phone with a sim only abbo from the netherlands, i already asked a new sim card from the provider to test if the voice quality improves but it makes no difference.
I'm gonna wait a little maybe a update comes, when i put the B416 update on the sd card now and do force update VL+ VL- PW. the update fails after ten procent.
Maybe tommorow im gonna look to unlock the phone for 4 euro.
Thanks for the help!
Update: I have tried the DC Unlocker program.
And obtained the bootloader code, but what do do with it now?
Something says i did something wrong, because the options where:
Read unlock codes
Read bootloader code
Lock Bootloader
Erase Huawei ID
But no unlock bootloader, so i did read bootloader and copied the code.
Click to expand...
Click to collapse
Hi dude,
DLOAD aka three button method won't anyway work on android 7 versions...
Sorry did you tried with your brother/sister/friend sim and seen if it's the same behaviour ? ( about the weird quality voice ).
Keep your unlocking code safe and before attempting any unlock re-try to update via Firmware Finder, checking this way...
Obviously turn on and connect with the WIFI...
After installing the app open it and add your variant (VNS-L31C432).
Find the firmware you're looking for (VNS-L31C432B416 FULLOTA-MF 2,2GB) and tap on it.
Now check the availability, register it with IMEI for the update and use the dns change / vpn method.
Once the vpn started, check repeatedly into the stock inbuild updater for a update and the B416 version should come. If will be disponible tap and download your update (should be approssimatively 2,2GB).
When it'll be at 5% pause it for a while and stop the vpn service.
Go back and re-active the download of the B416.
If all will go well you'll have the latest firmware.... :laugh:
Let me know how it went.
Cheers
Hi Dadditz,
No i don't have tryed another sim yet, the provider has said that if i give to more telephone numbers from the same provider they can do a scan for the quality.
So maybe that's something to try.
Later at night there came 3 more updates and the latest is now B414, so i am back on the same build
Yesterday i have unlocked the bootloader, with this guide: https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Yes sorry i couldn't wait so i think let's try
When i was at the TWRP part, when i must reboot to recovery mode it stays on the screen that the phone was not safe.
So that part i still want to proceed.
So i rebooted and go to sleep.
I just have tryed your tips, but i see the same behaviour, the download fails, the extra wifi router which i changed the dns to was not more in my network, so i tryed without it.
With my own wifi router at home, they don't allow the change of the DNS, can that be the problem? or if you put a extra wifi router to it it's no problem?
I attached some screenshots, do you see that the buildnumber is displayed 2 times after a row?
I maybe think that's because i tryed to register both the IMEI? so maybe that's a problem?
Sorry i don't know how to attach the screenshot's below.
So i put them in a album called B414 with my profile, i hope you can see them, sorry this is the first forum i post on.
Thanks a have a nice day :good:
Davidoff80 said:
Hi Dadditz,
No i don't have tryed another sim yet, the provider has said that if i give to more telephone numbers from the same provider they can do a scan for the quality.
So maybe that's something to try.
Later at night there came 3 more updates and the latest is now B414, so i am back on the same build
Yesterday i have unlocked the bootloader, with this guide: https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Yes sorry i couldn't wait so i think let's try
When i was at the TWRP part, when i must reboot to recovery mode it stays on the screen that the phone was not safe.
So that part i still want to proceed.
So i rebooted and go to sleep.
I just have tryed your tips, but i see the same behaviour, the download fails, the extra wifi router which i changed the dns to was not more in my network, so i tryed without it.
With my own wifi router at home, they don't allow the change of the DNS, can that be the problem? or if you put a extra wifi router to it it's no problem?
I attached some screenshots, do you see that the buildnumber is displayed 2 times after a row?
I maybe think that's because i tryed to register both the IMEI? so maybe that's a problem?
Sorry i don't know how to attach the screenshot's below.
So i put them in a album called B414 with my profile, i hope you can see them, sorry this is the first forum i post on.
Thanks a have a nice day :good:
Click to expand...
Click to collapse
Hey mate,
you're such as educated guy and i really apprecciate that !
Well... i saw inside your profile the B414 album and maybe i found the mistake...
damn ... seems you didn't read carefully what i wrote !!!
Look in previous post, you need the FULLOTA-MF package 2,2gb !!!
not the OTA-MF (incremental) one !!
Repeat again the procedure, register one only IMEI, hope this time
you'll be able to update correctly
Let me/other members know.. :fingers-crossed:
note: if the update will end correctly, it will re-lock the bootloader too.
Cheers
Hi Dadditz,
Thanks i didn't even finished my school so my english is not good, but i hope u understand.
I always tryed to install the full package mf B416 2.2gb but when i was testing it with the extra router it always shows a checksum error or download fail, tonight im gonna try that again, and let you know how it went and describe the steps that i tryed so maybe you can see where it goes wrong.
I also tryed the firmware finder windows version to register the IMEI, so maybe i make a mistake there.
This afternoon i was trying to attempt to proceed with the TWRP installation, but when i was booting with VL+ and power it won't go to recovery mode, on the xda forum i was reading more people with the same problem, the phone stays on booting
But the phone is working now so im glad i can whatsapp and watch netflix, so i will not try to go further with that, and focus on the B416 full update.
Thanks:good:
Davidoff80 said:
Hi Dadditz,
Thanks i didn't even finished my school so my english is not good, but i hope u understand.
I always tryed to install the full package mf B416 2.2gb but when i was testing it with the extra router it always shows a checksum error or download fail, tonight im gonna try that again, and let you know how it went and describe the steps that i tryed so maybe you can see where it goes wrong.
I also tryed the firmware finder windows version to register the IMEI, so maybe i make a mistake there.
Can you describe maybe how i can insert screenshots in a post?
When i try to insert a image in a post it is asking for a link, can i upload pictures at XDA or do i must use another image upload server?
This afternoon i was trying to attempt to proceed with the TWRP installation, but when i was booting with VL+ and power it won't go to recovery mode, on the xda forum i was reading more people with the same problem, the phone stays on booting
But the phone is working now so im glad i can whatsapp and watch netflix, so i will not try to go further with that, and focus on the B416 full update.
Thanks:good:
Click to expand...
Click to collapse
Dude,
sorry if i wrote something that someway hurted you,
english isn't my main language too...
Attachments aren't allowed to junior member, you need to post many times
in order to be authorized.
Let's go to the main problem...
If you want to try to flash the B416 version with the TWRP
you first need the correct TWRP version...
If you followed the link you posted above,
you tried to install the marshmallow version,
that's because it won't boot.
Your device are running android 7 ( nougat ) and you need a working recovery
in order to use Huawei Recovery Updater ( HuRu ) and flash that B416 firmware.
All files ( firmware apart ) you need are present on XDA, so just download and install
what i wrote you here.
Be sure you have installed Hisuite on your PC and it works.
Be sure you have enabled developer options then open it and
disable screen lock, enable oem-unlock and usb-debugging.
HERE to download and install Minimal ADB & Fastboot on your PC.
Connect the device to the PC, make sure PC recognize it allowing permissions if needed.
Then on the PC open a prompt (CMD) with admin rights and type "adb devices".
Below you should see your device as a serial of numbers and characters like
THIS screenshot. If that worked go next step.
Type "adb reboot bootloader" and it will reboot into fastboot/bootloader mode.
Now type "fastboot devices" and you should see your device as a serial of numbers and characters like
the screenshot i posted above except you'll see authorized/unauthorized section.
If your device are now authorized you're ready to go.
Type "fastboot reboot" and it will reboot into system.
HERE the link to download HassanMirza01's 3.1.1-1 EliteTWRP, flah it with fastboot command
( past a copy of TWRP into the adb & fastboot main folder )
( into fastboot mode ( see above ) type "fastboot fash recovery name_of_recovery_you_downloaded.img" )
When finished type "fastboot reboot recovery" or reboot with vol+ and power buttons.
Once you'll have a working TWRP installed reply me here
and i'll indicate the next steps.
note: with CMD prompt write without quotes " "
Cheers
Dadditz said:
Dude,
sorry if i wrote something that someway hurted you,
english isn't my main language too...
Attachments aren't allowed to junior member, you need to post many times
in order to be authorized.
Let's go to the main problem...
If you want to try to flash the B416 version with the TWRP
you first need the correct TWRP version...
If you followed the link you posted above,
you tried to install the marshmallow version,
that's because it won't boot.
Your device are running android 7 ( nougat ) and you need a working recovery
in order to use Huawei Recovery Updater ( HuRu ) and flash that B416 firmware.
All files ( firmware apart ) you need are present on XDA, so just download and install
what i wrote you here.
Be sure you have installed Hisuite on your PC and it works.
Be sure you have enabled developer options then open it and
disable screen lock, enable oem-unlock and usb-debugging.
HERE to download and install Minimal ADB & Fastboot on your PC.
Connect the device to the PC, make sure PC recognize it allowing permissions if needed.
Then on the PC open a prompt (CMD) with admin rights and type "adb devices".
Below you should see your device as a serial of numbers and characters like
THIS screenshot. If that worked go next step.
Type "adb reboot bootloader" and it will reboot into fastboot/bootloader mode.
Now type "fastboot devices" and you should see your device as a serial of numbers and characters like
the screenshot i posted above except you'll see authorized/unauthorized section.
If your device are now authorized you're ready to go.
Type "fastboot reboot" and it will reboot into system.
HERE the link to download HassanMirza01's 3.1.1-1 EliteTWRP, flah it with fastboot command
( past a copy of TWRP into the adb & fastboot main folder )
( into fastboot mode ( see above ) type "fastboot fash recovery name_of_recovery_you_downloaded.img" )
When finished type "fastboot reboot recovery" or reboot with vol+ and power buttons.
Once you'll have a working TWRP installed reply me here
and i'll indicate the next steps.
note: with CMD prompt write without quotes " "
Cheers
Click to expand...
Click to collapse
Hi Dadditz,
No problem mate , i'm new to this phone flashing and was insecure if my english was good enough to communicate on the xda forum.:good:
I was just to let you know that my second try with the second router is maybe succesful for the B416 FULL update part.
I now connected my pc to it and when i changed the DNS i changed the second DNS to 1.2.3.4 and when the firmware app says registered to this ip:......, i took that ip in the second router.
And then boot in to huawei Erecovery and now the B416 2gb is downloading, why the DNS and PROXY in the app only provide the 700mb update all the time even if i registred the 2gb version i don't know.
Maybe the DNS or ip setting had something to do with it, my understanding of network settings is limited.
The download is 42 procent after a hour but it's a old wifirouter.
So i was now about to ask if it's succeed i could undo the TWRP and lock the bootloader and just read your message, so i don't know if it hurt's anything if i let the update install
I wait and see :good:
edit: i did see you message that the update will relock the bootloader but i was asking because i was not sure because i messed up the TWRP part. edit
The update to B416 was succesfull! :good:
I haven't see the warning that the device isn't save when booting and Netflix appears in Google Play store again, so i guess i don't have do anything more to disable TWRP and locking the bootloader
Thanks for the help Dadditz and sorry that i was impatient to wait on your message, in the future i ask and wait patiently, but hey i didn't bricked the phone
If the voice quality improves i now must test, and the next step is to ask a network scan from the provider on 2 more telephone number in my town.
Thanks :good:
Davidoff80 said:
The update to B416 was succesfull! :good:
I haven't see the warning that the device isn't save when booting and Netflix appears in Google Play store again, so i guess i don't have do anything more to disable TWRP and locking the bootloader
Thanks for the help Dadditz and sorry that i was impatient to wait on your message, in the future i ask and wait patiently, but hey i didn't bricked the phone
If the voice quality improves i now must test, and the next step is to ask a network scan from the provider on 2 more telephone number in my town.
Thanks :good:
Click to expand...
Click to collapse
I suggested, you did. :good:
All is well that ends well.
If you had TWRP recovery installed,
you wouldn't be able to update with Firmware Finder,
as you would have needed stock recovery ...
And yes now the device is 100% stock.
Thanks for your feedback dude.
All the best
Hello,
Few months ago, when the battery was low (just below 20%) my P9 lite started acting crazy: opening/closing apps, pressing buttons, taking pictures, ... Everything so fast that the battery drained in few seconds. After searching the internet I tried changing the battery with an original one. It didn't change anything.
Recently the situation worsened: it seems that the phone fails to detect the real power of the battery. So even if the battery is 50-60%, it can happen that it starts acting crazy or, more recently, restarting all of a sudden. Then it still works, but after a bit it restarts again and the battery now is drained.
Both before changing the battery and now the problem can be easily solved by charging the phone. Connecting the cable stops immediately the phone both acting crazy and restarting.
Anyway, as you can guess, this is quite a problem if you are outside, even with a powerbank. But these restarst are becoming very frustrating even at home.
Beside this, the phone does work well so I think it's a pity to throw it off...
I've tried a hard reset just few days ago but it didn't change anything.
Is it possible to do anything to solve the problem?
Thank you
papersing said:
Hello,
Few months ago, when the battery was low (just below 20%) my P9 lite started acting crazy: opening/closing apps, pressing buttons, taking pictures, ... Everything so fast that the battery drained in few seconds. After searching the internet I tried changing the battery with an original one. It didn't change anything.
Recently the situation worsened: it seems that the phone fails to detect the real power of the battery. So even if the battery is 50-60%, it can happen that it starts acting crazy or, more recently, restarting all of a sudden. Then it still works, but after a bit it restarts again and the battery now is drained.
Both before changing the battery and now the problem can be easily solved by charging the phone. Connecting the cable stops immediately the phone both acting crazy and restarting.
Anyway, as you can guess, this is quite a problem if you are outside, even with a powerbank. But these restarst are becoming very frustrating even at home.
Beside this, the phone does work well so I think it's a pity to throw it off...
I've tried a hard reset just few days ago but it didn't change anything.
Is it possible to do anything to solve the problem?
Thank you
Click to expand...
Click to collapse
Hello,
sometimes weird things happens....
maybe it wont solve but
you can try this :
clear all recent apps,
reboot into e-recovery (keeping vol- & power)
then clear the cache and reboot system..
Test how it work...
Cheers
Dadditz said:
Hello,
sometimes weird things happens....
maybe it wont solve but
you can try this :
clear all recent apps,
reboot into e-recovery (keeping vol- & power)
then clear the cache and reboot system..
Test how it work...
Cheers
Click to expand...
Click to collapse
Thank you for your suggestion! I tried but unfortunately it didn't work, nothing changed...
papersing said:
Thank you for your suggestion! I tried but unfortunately it didn't work, nothing changed...
Click to expand...
Click to collapse
Yes, the behaviour is more similar to a malware.
It could be an app you recently installed....
A good change is to re-install your same firmware
or possibly to update it to the latest...
You can use Firmware Finder app to do this,
but beware what you do, a wrong firmware
may brick your device.
It's your choice doing this...
Good luck dude.
Cheers
Dadditz said:
Yes, the behaviour is more similar to a malware.
It could be an app you recently installed....
A good change is to re-install your same firmware
or possibly to update it to the latest...
You can use Firmware Finder app to do this,
but beware what you do, a wrong firmware
may brick your device.
It's your choice doing this...
Good luck dude.
Cheers
Click to expand...
Click to collapse
Hello! Excuse me I'm not sure I've understood correclty. I've searched for the Firmware Finder in Play Store, but looking at the comments it seems not working in my country. I've tried to search for the original firmwares in google but it appears I can find only modded versions which requires flashing and other stuff I don't know how to do. I couldn't find a guide for real beginners, is there?
Anyway I've recently done the hard reset on my phone so it shouldn't be an app, is it? Is it possible the firmware is damaged even if I never unlocked or done anything special on my phone?
Thank you!
papersing said:
Hello! Excuse me I'm not sure I've understood correclty. I've searched for the Firmware Finder in Play Store, but looking at the comments it seems not working in my country. I've tried to search for the original firmwares in google but it appears I can find only modded versions which requires flashing and other stuff I don't know how to do. I couldn't find a guide for real beginners, is there?
Anyway I've recently done the hard reset on my phone so it shouldn't be an app, is it? Is it possible the firmware is damaged even if I never unlocked or done anything special on my phone?
Thank you!
Click to expand...
Click to collapse
Ok dude, you don't have to worry.
There are many guides on the web in various forum,
especially here on XDA. What is your current firmware ?
I mean the whole firmware ex. VNS-L21C432B504 / VNS-L23C605B393;
You can try doing this in two ways:
1 - using FF and pointing to your current firmware or updating it to latest if possible;
2 - using HuRUpdater.
This method let you flash whatever version of firmwares,
but you need to unlock the bootloader and use a custom recovery (TWRP)(it cost 4€).
Using FF will not cost money, you should try it first.
Cheers
Dadditz said:
Ok dude, you don't have to worry.
There are many guides on the web in various forum,
especially here on XDA. What is your current firmware ?
I mean the whole firmware ex. VNS-L21C432B504 / VNS-L23C605B393;
You can try doing this in two ways:
1 - using FF and pointing to your current firmware or updating it to latest if possible;
2 - using HuRUpdater.
This method let you flash whatever version of firmwares,
but you need to unlock the bootloader and use a custom recovery (TWRP)(it cost 4€).
Using FF will not cost money, you should try it first.
Cheers
Click to expand...
Click to collapse
Hello! Thank you for your help.
I tried to follow your instructions but something went wrong.
My firmware is VNS-L31C432B417, so in FF I've searched VNS-L31C432:
I then pushed the button with the "play" symbol and FF searched for all the six tasks, but it couldn't find any firmware
Did I do something wrong?
Strange fact: searching in the internet for VNS-L31C432B417 I found that, since already 3 months, it is available in my country a new firmware VNS-L31C432B418, but, if I search for updates in the settings section of the phone, this update doesn't show up, saying that my phone is already up to date. Is it normal?
papersing said:
Hello! Thank you for your help.
I tried to follow your instructions but something went wrong.
My firmware is VNS-L31C432B417, so in FF I've searched VNS-L31C432:
I then pushed the button with the "play" symbol and FF searched for all the six tasks, but it couldn't find any firmware
Did I do something wrong?
Strange fact: searching in the internet for VNS-L31C432B417 I found that, since already 3 months, it is available in my country a new firmware VNS-L31C432B418, but, if I search for updates in the settings section of the phone, this update doesn't show up, saying that my phone is already up to date. Is it normal?
Click to expand...
Click to collapse
Dude you have the same device i owned.
Don't worry about FF, you simply searched the wrong place...
Tap "Common Base" TAB, write VNS-L31C432 and press on the lens to search ...
You'll see all the firmwares for your variant...
Beware dude, you have B417, it's the latest (for single sim)
and cannot update to B418 (it's for dual sim).
You have to point to your current same firmware.
First thing, delete all the safties (fingerprints/pin/pattern)
and do a backup of all your stuff, just to stay safe...
Make sure you have access to the network and use "Firmware Finder app",
choose B417 FULLOTA-MF, follow the inbuild guide (register the IMEI,
use dns/vpn method). Then go into settings/updates and tap "search for updates"
you should find your update. Tap to download it and when it reaches 5%,
tap pause and disconnect the vpn.
Reactivate the download and complete the reinstallation of the firmware.
Quite similar to THIS GUIDE, just change the firmware with yours...
Edit: I replaced the image because it could not be viewed.
Edit2: re-replaced again the image, still it couldn't be viewed...
Dadditz said:
Dude you have the same device i owned.
Don't worry about FF, you simply searched the wrong place...
Tap "Common Base" TAB, write VNS-L31C432 and press on the lens to search ...
You'll see all the firmwares for your variant...
Beware dude, you have B417, it's the latest (for single sim)
and cannot update to B418 (it's for dual sim).
You have to point to your current same firmware.
First thing, delete all the safties (fingerprints/pin/pattern)
and do a backup of all your stuff, just to stay safe...
Make sure you have access to the network and use "Firmware Finder app",
choose B417 FULLOTA-MF, follow the inbuild guide (register the IMEI,
use dns/vpn method). Then go into settings/updates and tap "search for updates"
you should find your update. Tap to download it and when it reaches 5%,
tap pause and disconnect the vpn.
Reactivate the download and complete the reinstallation of the firmware.
Quite similar to THIS GUIDE, just change the firmware with yours...
Edit: I replaced the image because it could not be viewed.
Edit2: re-replaced again the image, still it couldn't be viewed...
Click to expand...
Click to collapse
Hello!
Sorry I took some time to reply, recently I had to move a lot so I didn't want to take the risk to mess things with the smartphone. Anyway, yesterday I did the reinstallation of the firmware, choosing the VNS-L31C432B417 FullOTA-MF dated 2020.01.13 (I didn't get the difference with the other one dated 2020.01.08, so I choose the most recent).
I followed your guide (thanks!), the only thing I changed is the method: the dns method didn't work so I used the e-recovery mode and it seems that all went well... Except nothing changed. Now, even when the battery is full charged, if I listen to a podcast via speakerphone after a while the phone restarts suddenly.
Is it possible there is something wrong in the hardware?
It's so frustrating because aside from that it works flawless.
Thank you for your help!
papersing said:
Hello!
Sorry I took some time to reply, recently I had to move a lot so I didn't want to take the risk to mess things with the smartphone. Anyway, yesterday I did the reinstallation of the firmware, choosing the VNS-L31C432B417 FullOTA-MF dated 2020.01.13 (I didn't get the difference with the other one dated 2020.01.08, so I choose the most recent).
I followed your guide (thanks!), the only thing I changed is the method: the dns method didn't work so I used the e-recovery mode and it seems that all went well... Except nothing changed. Now, even when the battery is full charged, if I listen to a podcast via speakerphone after a while the phone restarts suddenly.
Is it possible there is something wrong in the hardware?
It's so frustrating because aside from that it works flawless.
Thank you for your help!
Click to expand...
Click to collapse
Ah yes, the e-recovery mode ... :cyclops:
I had assumed you had already tried it, hence the suggestion for using FF ...
So if after re-installing the software nothing has substantially changed,
then it would be something related to the hardware, honestly I can't tell you.
You could try to bring it to this service point or to a trusted person,
maybe a friend who deals with mobile devices.
Or maybe the time has simply come to replace it with another,
anyway I wish you good luck ...
Cheers