Database Users

[Guide] Honor 5X KIW-L22 (Indian Variant) Back to Stock [L22]

If you wanna restock your Indian Honor 5X (kiw-l22) for warranty reasons, etc, this guide should, well, guide you!
This method works no matter which recovery or rom you're on. Data is wiped. So backup if you care about your data.
1) Download the following file and extract it.
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=76783
2) Copy the dload folder to your phone's external memory card.
3) Shut down your 5X and let it stay like that for 10-20 seconds.
4) Press and hold the volume up and down buttons and press the power button.
5) Let go of the power button once you feel the vibration while keeping the volume buttons pressed.
6) The device should enter Software Upgrade mode and the flashing should start automatically.
7) Let it flash and reboot twice.
8) You'll be back to 100% stock. :highfive:
PS : If anybody is kind enough to mirror the file, I'll be glad to add it to the OP.

Direct download link : India http://download-c.huawei.com/download/downloadCenter?downloadId=76783&version=289995&siteCode=in
For other channels :
http://download-c.huawei.com/download/downloadCenter?downloadId=76524&version=286788&siteCode=in

This will be handy when an update is arriving

Thanks You. my phone was getting slow with all the custom roms and debloats. got back to stock and applied the B140 Update.

abehrani said:
Thanks You. my phone was getting slow with all the custom roms and debloats. got back to stock and applied the B140 Update.
Click to expand...
Click to collapse
Oh really ? Just on Stock + Root din't it work charm removing bloatware ?? Only three were on for our devices -Bliss, Cm13.0, 12.1

kartrikpal said:
Oh really ? Just on Stock + Root din't it work charm removing bloatware ?? Only three were on for our devices -Bliss, Cm13.0, 12.1
Click to expand...
Click to collapse
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.

abehrani said:
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
Click to expand...
Click to collapse
Even i'm waiting for it, i tried porting fingerprint sensor - flashed it did not work either.

Hello,
Do you think I can use this rom on my L21 ?
Thanks

newic2001 said:
Hello,
Do you think I can use this rom on my L21 ?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480

CosmoDroid said:
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
Click to expand...
Click to collapse
Thank you

Flash 4 files boot system cyst recovery from b150 upgard but emui showing 2.0 plz help

abehrani said:
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
Click to expand...
Click to collapse
Finger print sensor fixed in CM13, the build should be up soon. Here is the post from the forum:
http://forum.xda-developers.com/showpost.php?p=67317455&postcount=1142

Hi,
on KIWI-L22 (Indian)
I had enrolled for beta program previously, so installed b130 and updated to 6.0 MM beta. I didnt like it much, so I switched back to CM 13.0.
As Official MM 6.0 is out now, so I wanted to switch to stock.
Following the procedure mentioned in OP, I downloaded L22-B130 and tried to restore stock but it failed mentioning "wrong version".
then I downloaded the L22-B320 version
http://www.hihonor.com/in/support/details/?DOC_ID=83346
and follow the same procedure. "voila" I returned to stock MM 6.0.
My whole point in saying all this is once upgraded to MM, then you have to use the MM "update.app".
Many thanks to Cosmodroid for this post.

is this okay to do with TWRP recovery?

ruler01 said:
is this okay to do with TWRP recovery?
Click to expand...
Click to collapse
this post is old from July ..have you checked the forums for newer methods ?

Sent from my KIW-L22 using Tapatalk

Link doesn't exist
The link you are posted does not exist and it shows error. Please update the exact link.

CosmoDroid said:
If you wanna restock your Indian Honor 5X (kiw-l22) for warranty reasons, etc, this guide should, well, guide you!
This method works no matter which recovery or rom you're on. Data is wiped. So backup if you care about your data.
1) Download the following file and extract it.
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=76783
2) Copy the dload folder to your phone's external memory card.
3) Shut down your 5X and let it stay like that for 10-20 seconds.
4) Press and hold the volume up and down buttons and press the power button.
5) Let go of the power button once you feel the vibration while keeping the volume buttons pressed.
6) The device should enter Software Upgrade mode and the flashing should start automatically.
7) Let it flash and reboot twice.
8) You'll be back to 100% stock. :highfive:
PS : If anybody is kind enough to mirror the file, I'll be glad to add it to the OP.
Click to expand...
Click to collapse
You said, no matter which recovery you're on,
But I tried with twrp and incompatible stock recovery, shows "Software Install Failed".
What do you think about this? Please give me a as solution, I'm in bootloop.
Device: KIW-L22
Also tell me about the transfer package shown in the screenshot.

[FULL RESTORE] MM PCA STOCK odin flashable pulled from Samfirm tool

Moved from the android dev section to general section as suggested by @malbert16442 This should not trip knox but Im guessing most people who are viewing this already have anyway . Simply Download on your PC, put your device into download mode (power off phone and hold volume down, home button and power button and let go when you see the download mode icon) and place the file in the AP slot in Odin.
LINK HERE: https://drive.google.com/open?id=0Bw2KkJbEyV5EOEo2SWMzQ21naUU
Rom Devs feel free to use this for Deodexing or anything without asking permission. Free to use for anything!

first

You're welcome.

Oh boy been waiting for this thank you very much

badapple420 said:
Oh boy been waiting for this thank you very much
Click to expand...
Click to collapse
No problem! Now I can help out with testing roms and revert back a lot easier and quicker if something goes wrong!

malbert16442 said:
first
Click to expand...
Click to collapse
Is this a rooted ROM?
Thanks.

Cooljb said:
Is this a rooted ROM?
Thanks.
Click to expand...
Click to collapse
No this is the official restore file. So unrooted.

chippinganimal said:
No this is the official restore file. So unrooted.
Click to expand...
Click to collapse
Got it. Thanks.

works, tested

It worked on my S5 but will not root using CF auto root. Mine locked up and had to re-flash.
Anyone root this yet and how?

[email protected] said:
It worked on my S5 but will not root using CF auto root. Mine locked up and had to re-flash.
Anyone root this yet and how?
Click to expand...
Click to collapse
For MM, you have to use a different method called systemless root. I did it a while ago and there is a written out tutorial over on the "sprint gs5 android 6.0" thread in this forum. Just use the search tool there and search "systemless root."

Decisions, decisions - - use this to 'upgrade stock' from my rooted stock deox and have phone totally reset ...or wait for deox stock MM PCA and see if it will take without reset ...
hmmm
Was all hot to upgrade the 2 yo phone , but nothing compelling..nothing faster with qi charging, radio, ir blaster , sd-card slot, water proof , and definetley nothing with removable battery. S7 is the closest and it is locked down ..so sad.
Kenny

chippinganimal said:
Moved from the android dev section to general section as suggested by @malbert16442 This should not trip knox but Im guessing most people who are viewing this already have anyway . Simply Download on your PC, put your device into download mode (power off phone and hold volume down, home button and power button and let go when you see the download mode icon) and place the file in the AP slot in Odin.
LINK HERE: https://drive.google.com/open?id=0Bw2KkJbEyV5EOEo2SWMzQ21naUU
Rom Devs feel free to use this for Deodexing or anything without asking permission. Free to use for anything!
Click to expand...
Click to collapse
This should be in the DEV section. If he told you to move it, it was probably because your original link didn't work.

Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!

hussmanne said:
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
Click to expand...
Click to collapse
It can take up to 20 minutes to boot, but usually takes around 10 min

hussmanne said:
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
Click to expand...
Click to collapse
I needed to wipe data, then it booted
Sent from my SM-G900P using XDA-Developers mobile app

maheboi said:
I needed to wipe data, then it booted
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
Wiping data did it! Thank you!

Has anyone tried flashing this using flashfire, injecting root, and flashing the stock partitions via Odin with success? Wile my phone is beyond the warranty period, I have not tripped knox yet and would like to keep it that way if possible. I was able to have completely stock rooted OK4 with this method.

Just to be clear -- will applying this tar via Odin do the full update of MM bootloader, kernel, modem (if applicable), etc etc?

nickmaps said:
Just to be clear -- will applying this tar via Odin do the full update of MM bootloader, kernel, modem (if applicable), etc etc?
Click to expand...
Click to collapse
Yup! So you will be able to flash custom roms like @malbert16442 s7 port without any issues (well when he releases V3 as he a group of people beta testing it right now and according to @philiptibbs who is among them V3 works fully with sprint. And on 2.5 everything works but sending sms (recieving sms and sending/recieving mms work fine though, not sure why thats the case.)

Possible root for Tab S2 SM-T818V and SM-T818A aka SM-T819

I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.

I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?

le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.

ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk

le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.

ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk

There's been 10 downloads yet no one has come back with any reports?

ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...

burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore

le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.

ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.

ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either

le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?

ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.

i have the AQA3 as well, which files should i use first to help with this?

rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?

youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results

Anyway to Downgrade back to Marshmallow or Naught

Hi Guys,
is there anyway go back to Marshmallow or Naught ,
i recently updated to Oreo , and sometimes the phone goes unresponsive and many of the apps that I'm using is crashing,
And battery back up also reduced ,,
i never tried Rooting or any customization on this device
Regards
Br

ameerali19 said:
Hi Guys,
is there anyway go back to Marshmallow or Naught ,
i recently updated to Oreo , and sometimes the phone goes unresponsive and many of the apps that I'm using is crashing,
And battery back up also reduced ,,
i never tried Rooting or any customization on this device
Regards
Br
Click to expand...
Click to collapse
I think Flashtool works without root, but I always root, so can't say I've ever tried ...

ameerali19 said:
Hi Guys,
is there anyway go back to Marshmallow or Naught ,
i recently updated to Oreo , and sometimes the phone goes unresponsive and many of the apps that I'm using is crashing,
And battery back up also reduced ,,
i never tried Rooting or any customization on this device
Regards
Br
Click to expand...
Click to collapse
As @levone1 mentioned use Flashtool to downgrade, it doesn't need root or unlocked bootloader.
But with your problems I would start with resetting phone to factory settings. I have non of those problem and battery usage is around two days.

PiixJu said:
As @levone1 mentioned use Flashtool to downgrade, it doesn't need root or unlocked bootloader.
But with your problems I would start with resetting phone to factory settings. I have non of those problem and battery usage is around two days.
Click to expand...
Click to collapse
thanks for your reply.
i don't want to Root or bootloader unlock,
can i ask , is it worth root xcompact , what are the main advantages for a normal user (i'm not a techie)
thanks

ameerali19 said:
thanks for your reply.
i don't want to Root or bootloader unlock,
can i ask , is it worth root xcompact , what are the main advantages for a normal user (i'm not a techie)
thanks
Click to expand...
Click to collapse
Main point of rooting is full control, (ads, security, functions, appearance, etc.). If you're happy with how it is, leave it alone. If there's things you wish were different, you might need root to change it.

Hi, I'm looking for some help for my Phone;
Since I've updated to Oreo the battery performance got worst. Before I was able to have almost two days usage, but now I can't use it more the one day according with the normal use. In addiction it was never been hot during the usage before, today while I was watching some video on chrome the smartphone became so hot on the back. I've already tried to fix with a couple of factory reset but nothing happend.
Any advice?
May I downgrade to Nougat?

After oreo update I downgraded to marshamallow 6.0.1 because I was very disappointed with battery life, overall speed and performance. Also xperia themes used to work better. In oreo battery life is 1 day. In mm 2-3 days. RAM free in oreo is 800-900 MB. In MM 1.6-1.7 GB. I'm using service exchange unit, not the customised one. And thats the best rom for me, available via xperifirm in flashtool
??

Ketrab8 said:
After oreo update I downgraded to marshamallow 6.0.1 because I was very disappointed with battery life, overall speed and performance. Also xperia themes used to work better. In oreo battery life is 1 day. In mm 2-3 days. RAM free in oreo is 800-900 MB. In MM 1.6-1.7 GB. I'm using service exchange unit, not the customised one. And thats the best rom for me, available via xperifirm in flashtool
Click to expand...
Click to collapse
Thanks for your reply; due to I'm not at all aware on modding, I looked for some guide/tutorial online without success.
I have an Xperia X Compact no rooted, No Brand, Sim free and still one year italian warranty, with build num 34.4.A.2.70.
So how may I downgrade to Nougat with XperiFirm Tool?
Do you have any tested tutorial/guide I can follow?

I hope that will help anyone who wants downgrade to nougat from oreo without modding or voiding warranty
Well, backup all your files before flashing. You will lost everything on your phone but not on SD card though.
Follow these steps that I prepared:
1. On PC download flashtool. Just click DOWNLOAD FILE button. Link is below.
https://devfiles.co/download/MIRnJ1H2/flashtool-0.9.23.1-windows.exe
2. Install flashtool via downloaded .exe file. That's easy, just follow instructions displayed during installation.
3. Download latest nougat official rom for Xperia X Compact. Link is below.
http://dl16.easy-firmware.com/download.php?ds=139378xtc5dc194365f4dcb3e43c023f2bf0824210b204de0
4. Paste downloaded .ftf to desktop.
5. Go to folder where you have installed flashtool (Default: C:\Flashtool).
6. On 32-bit Windows open Flashtool.exe; On 64-bit Windows open Flashtool64.exe.
7. Click thunder button click and select flashmode.
8. Click on 3 dots on right corner and find ftf. It's on desktop.
9. On Firmwares tab click arrows near Xperia X Compact>F5321>34.3.A.0.252
10. On Wipe tab under Sin select all things (APPS_LOG, DIAG etc.)
11. Click flash button down below.
12. Wait for rom to prepare.
13. If there will be any question click Yes or OK.
14. Big windows with phones will show up.
15. Turn off your phone.
16. Hold volume down button and in the same time connect it to PC.
17. Wait until flashing is ready (~10 minutes).
18. Flash will be done when you find in log this line:
INFO - Flashing finished.
19. Unplug your phone and turn it on.
20. Enjoy.
If I helped click Thanks! button. If you have questions, you can post quick reply

Ketrab8 said:
I hope that will help anyone who wants downgrade to nougat from oreo without modding or voiding warranty
Well, backup all your files before flashing. You will lost everything on your phone but not on SD card though.
Follow these steps that I prepared:
1. On PC download flashtool. Just click DOWNLOAD FILE button. Link is below.
https://devfiles.co/download/MIRnJ1H2/flashtool-0.9.23.1-windows.exe
2. Install flashtool via downloaded .exe file. That's easy, just follow instructions displayed during installation.
3. Download latest nougat official rom for Xperia X Compact. Link is below.
http://dl16.easy-firmware.com/download.php?ds=139378xtc5dc194365f4dcb3e43c023f2bf0824210b204de0
4. Paste downloaded .ftf to desktop.
5. Go to folder where you have installed flashtool (Default: C:\Flashtool).
6. On 32-bit Windows open Flashtool.exe; On 64-bit Windows open Flashtool64.exe.
7. Click thunder button click and select flashmode.
8. Click on 3 dots on right corner and find ftf. It's on desktop.
9. On Firmwares tab click arrows near Xperia X Compact>F5321>34.3.A.0.252
10. On Wipe tab under Sin select all things (APPS_LOG, DIAG etc.)
11. Click flash button down below.
12. Wait for rom to prepare.
13. If there will be any question click Yes or OK.
14. Big windows with phones will show up.
15. Turn off your phone.
16. Hold volume down button and in the same time connect it to PC.
17. Wait until flashing is ready (~10 minutes).
18. Flash will be done when you find in log this line:
INFO - Flashing finished.
19. Unplug your phone and turn it on.
20. Enjoy.
If I helped click Thanks! button. If you have questions, you can post quick reply
Click to expand...
Click to collapse
the firmware link is not working bro,
can i get the link details again
thanks

ameerali19 said:
the firmware link is not working bro,
can i get the link details again
thanks
Click to expand...
Click to collapse
https://easy-firmware.com/index.php?a=downloads&b=folder&id=18656

charos said:
https://easy-firmware.com/index.php?a=downloads&b=folder&id=18656
Click to expand...
Click to collapse
Hello i just installed 7.1 , it seems to work now but i have some questions
1. when flashing the files i got like a message that some file couldnt be found but i just press " ok, continue"
then in the log i got messages like this:
- No loader found or set manually. Skipping loader
Unit 2212 not found in bundle
Unit 2550 not found in bundle
Did i do something wrong? or it doesnt matter at all
I followed exactly the steps listed before
thanks if you could answer this or maybe someone else.

Sorry for dead link. Here is active!
ameerali19 said:
the firmware link is not working bro,
can i get the link details again
thanks
Click to expand...
Click to collapse
https://easy-firmware.com/index.php?a=downloads&b=file&id=80192

Mi A1 | Unroot | Install STOCK ROM

Mi A1 | Unroot | Install STOCK ROM
=======
Hi,
Currently I am using AOSP Extended ROM ( Android 8.1) in my Mi A1.
Somebody please provide the steps to relock the bootloader and install Stock Rom ( Android One 8.1 ).
Also provide the link to download the Stock Rom.
Thanks in avdance. :good:
=========

arunrajr said:
Mi A1 | Unroot | Install STOCK ROM
=======
Hi,
Currently I am using AOSP Extended ROM ( Android 8.1) in my Mi A1.
Somebody please provide the steps to relock the bootloader and install Stock Rom ( Android One 8.1 ).
Also provide the link to download the Stock Rom.
Thanks in avdance. :good:
=========
Click to expand...
Click to collapse
Flash it normally with miflash tool, and choose clean all + lock

Felixlix45 said:
Flash it normally with miflash tool, and choose clean all + lock
Click to expand...
Click to collapse
Could you please provide me the exact steps or any link ? I am confused also provide me the downloading link for STOCK rom. I have gone through many links but not working properly.

arunrajr said:
Could you please provide me the exact steps or any link ? I am confused also provide me the downloading link for STOCK rom. I have gone through many links but not working properly.
Click to expand...
Click to collapse
I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=at...yYzJhMXwxNTM1NDI2MDE3fDIyNTA2MTkxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8.0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can

YayJohn said:
I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=at...yYzJhMXwxNTM1NDI2MDE3fDIyNTA2MTkxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8.0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can
Click to expand...
Click to collapse
====
It works !!!!
Thank you soo much :good:
=====

arunrajr said:
====
It works !!!!
Thank you soo much :good:
=====
Click to expand...
Click to collapse
Np click on the thanks button if it helped u

And may i ask, how if I wanted to re Root back? I mean from this latest rom android One 8.1.0 oreo.
Is it same step as i before this rooting from Nougat 7.1.2

iki_fly4862 said:
And may i ask, how if I wanted to re Root back? I mean from this latest rom android One 8.1.0 oreo.
Is it same step as i before this rooting from Nougat 7.1.2
Click to expand...
Click to collapse
I dont get what you are asking, are you asking how to root 7.1.2?

YayJohn said:
I dont get what you are asking, are you asking how to root 7.1.2?
Click to expand...
Click to collapse
I meant how to root the 8.1.0

iki_fly4862 said:
I meant how to root the 8.1.0
Click to expand...
Click to collapse
Yes, it should be the same, just when you flash the rom (if you do) flash magisk before opengapps

Should i flash twrp by cosmic dan in case i don't want to lose my twrp Everytime i flash rom?

iki_fly4862 said:
Should i flash twrp by cosmic dan in case i don't want to lose my twrp Everytime i flash rom?
Click to expand...
Click to collapse
yes

YayJohn said:
I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=at...yYzJhMXwxNTM1NDI2MDE3fDIyNTA2MTkxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8.0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can
Click to expand...
Click to collapse
I have rooted Mi A1 and using Resurrection Remix OS. I have rooted device with Megisk and also installed TWRP recovery. Now I want to back to stock rom, so how to unroot my device and what I have to take care while doing this (about magisk and twrp). Please suggest me the good video or steps in brief because I don't know much about such things.

jaybusa said:
I have rooted Mi A1 and using Resurrection Remix OS. I have rooted device with Megisk and also installed TWRP recovery. Now I want to back to stock rom, so how to unroot my device and what I have to take care while doing this (about magisk and twrp). Please suggest me the good video or steps in brief because I don't know much about such things.
Click to expand...
Click to collapse
Just do what I told you in the steps.... Also much better than a vid because they don't go straight to the point

YayJohn said:
Just do what I told you in the steps.... Also much better than a vid because they don't go straight to the point
Click to expand...
Click to collapse
Hello, I am using TWRP recovery, so can I get OTA update after I unroot my phone?

jaybusa said:
Hello, I am using TWRP recovery, so can I get OTA update after I unroot my phone?
Click to expand...
Click to collapse
I dont know much about ota so I don't know, just Google search or make a post

How long does this process usually take? I started the flashing process on my mi a1 20 minutes ago and for the last 15 minutes it has just been bootlooping it seems...
EDIT: So in an attempt to restart the fastboot (volume and power button) it seems I have finished the flashing process. (In case someone else has this problem)

Hi All.
Getting this error while flashing.
Please help ASAP.

Chimax said:
Hi All.
Getting this error while flashing.
Please help ASAP.
Click to expand...
Click to collapse
Is there any chance you deleted or not extracted all the files
---------- Post added at 09:47 AM ---------- Previous post was at 09:46 AM ----------
JamesKont said:
How long does this process usually take? I started the flashing process on my mi a1 20 minutes ago and for the last 15 minutes it has just been bootlooping it seems...
EDIT: So in an attempt to restart the fastboot (volume and power button) it seems I have finished the flashing process. (In case someone else has this problem)
Click to expand...
Click to collapse
It only takes 4 minutes max