Database Users

[Q] [IdeaTab A1000F] Driver disconnects after few seconds

Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.

adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?

linuxhost said:
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
Click to expand...
Click to collapse
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files

adokitkat said:
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
Click to expand...
Click to collapse
Thank you for your reply, adokitkat.

adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems

Yes pls
appollokillers1 said:
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Click to expand...
Click to collapse
That will be great thanks.

adokitkat said:
That will be great thanks.
Click to expand...
Click to collapse
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life

appollokillers1 said:
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
Click to expand...
Click to collapse
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote

adokitkat said:
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
Click to expand...
Click to collapse
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?

appollokillers1 said:
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
Click to expand...
Click to collapse
It was ok for them, i dont know why not for me .. At least it worked one time.. And i never heard of it, i was trying to use all common root programs and nothing .. I will check it out, thanks

TWRP link is down, mind passing on a new one

Hard Brick: PLEASE HELP -> SOLVED !

I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help

Android-rocks said:
I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Click to expand...
Click to collapse
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat

XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone.. I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?

Android-rocks said:
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone? I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Click to expand...
Click to collapse
can you get into download mode if so use back to stock guide to recover your phone

XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
XxZombiePikachu said:
can you get into download mode if so use back to stock guide to recover your phone
Click to expand...
Click to collapse
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?

Android-rocks said:
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Click to expand...
Click to collapse
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you

XxZombiePikachu said:
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
Click to expand...
Click to collapse
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?

Android-rocks said:
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Click to expand...
Click to collapse
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically

XxZombiePikachu said:
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
Click to expand...
Click to collapse
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?

Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work

XxZombiePikachu said:
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
Click to expand...
Click to collapse
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?

Android-rocks said:
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Click to expand...
Click to collapse
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery

XxZombiePikachu said:
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
Click to expand...
Click to collapse
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?

Android-rocks said:
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Click to expand...
Click to collapse
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot

thrust heuralt
XxZombiePikachu said:
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
Click to expand...
Click to collapse
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!

Android-rocks said:
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Click to expand...
Click to collapse
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

XxZombiePikachu said:
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
I am sorry i tried but couldnt figure out, how can be the title changed?

Android-rocks said:
I am sorry i tried but couldnt figure out, how can be the title changed?
Click to expand...
Click to collapse
edit the title of the first post and it will change the name of the thread

XxZombiePikachu said:
edit the title of the first post and it will change the name of the thread
Click to expand...
Click to collapse
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?

Android-rocks said:
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Click to expand...
Click to collapse
Click on edit/delete on your first post, click on advanced and you should be able to edit title there
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

[Q] Help me

Hello friends I have the cell Samsumg Grand Prime Duos SM-G530H and every time I turn off , to reload the battery, he open in Recovery mode, what should I do?
thanks and sorry my english .

The_Mechanic_Br said:
Hello friends I have the cell Samsumg Grand Prime Duos SM-G530H and every time I turn off , to reload the battery, he open in Recovery mode, what should I do?
thanks and sorry my english .
Click to expand...
Click to collapse
Turn Off The Phone And Remove Battery for 5min and then enter the battery and start the phone.

Hamidkhan22 said:
Turn Off The Phone And Remove Battery for 5min and then enter the battery and start the phone.
Click to expand...
Click to collapse
Without improvements , if I install the stock rom again will be to solved?

The_Mechanic_Br said:
Without improvements , if I install the stock rom again will be to solved?
Click to expand...
Click to collapse
So do hard reset, you have nothing to lose. If it doesn't work, download stock rom from sammobile and install it.

I restored the original system and it worked. thank you:good:

Same problem
The_Mechanic_Br said:
I restored the original system and it worked. thank you:good:
Click to expand...
Click to collapse
How'd you do that restoring the original system?

Mr.IDK said:
How'd you do that restoring the original system?
Click to expand...
Click to collapse
hello friend, sorry for the delay in responding,
downloaded original stock ROM
go in setttings>about device> check baseband version your device and make the download stock rom.
in http://www.sammobile.com/firmwares/database/SM-G530H/.
Instructions
Extract (unzip) the firmware file
Download Odin3 v3.09 from here.
SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
Extract firmware ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes

Mr.IDK said:
How'd you do that restoring the original system?
Click to expand...
Click to collapse
hello friend, sorry for the delay in responding,
downloaded original stock ROM
go in setttings>about device> check baseband version your device and make the download stock rom.
in http://www.sammobile.com/firmwares/database/SM-G530H/.
Instructions
Extract (unzip) the firmware file
Download Odin3 v3.09 from here.
SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
Extract firmware ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes

Thanks for your effort in reply but im a bit confused...
The_Mechanic_Br said:
hello friend, sorry for the delay in responding,
downloaded original stock ROM
go in setttings>about device> check baseband version your device and make the download stock rom.
in http://www.sammobile.com/firmwares/database/SM-G530H/.
Instructions
Extract (unzip) the firmware file
Download Odin3 v3.09 from here.
SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
Extract firmware ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
1st Question, I bought my G530H from a Telco Company and when you turn ON the phone it has a Telco animation boot... does this method can remove that also? because it's sucks...
2nd Question, My phone is rooted, does this method will remove it? or any files and messages? because It sounds like It would reformat my phone....
THanks in advance!

Mr.IDK said:
1st Question, I bought my G530H from a Telco Company and when you turn ON the phone it has a Telco animation boot... does this method can remove that also? because it's sucks...
2nd Question, My phone is rooted, does this method will remove it? or any files and messages? because It sounds like It would reformat my phone....
THanks in advance!
Click to expand...
Click to collapse
I dont know whether it would remove the boot animation or not.. But theoretically speaking.. It should.
And yeah. It will remove the root. But It wont delete anything on your device. But it is always preferred to do a factory reset before flashing a new firmware. Or you might run into some problems later.
So, If you are planning on flashing it, Be sure to backup everything before you do. Precaution is better than regret.

Kade Sonix said:
I dont know whether it would remove the boot animation or not.. But theoretically speaking.. It should.
And yeah. It will remove the root. But It wont delete anything on your device. But it is always preferred to do a factory reset before flashing a new firmware. Or you might run into some problems later.
So, If you are planning on flashing it, Be sure to backup everything before you do. Precaution is better than regret.
Click to expand...
Click to collapse
That's great if the boot animation will removed but if the root is removed then if I root it again, I think the auto-recovery mode could happen again. Is there other method of rooting this device?

Mr.IDK said:
That's great if the boot animation will removed but if the root is removed then if I root it again, I think the auto-recovery mode could happen again. Is there other method of rooting this device?
Click to expand...
Click to collapse
No. There aint any other method. But some people who installed the custom recovery after rooting didnt suffer this problem. Maybe installing custom recovery can end it.

Kade Sonix said:
No. There aint any other method. But some people who installed the custom recovery after rooting didnt suffer this problem. Maybe installing custom recovery can end it.
Click to expand...
Click to collapse
I'll try installing custom recovery... but I'll still proceed flashing new stock rom to remove the boot animation...
currently I'm backing up my new user+system apps and newer versions... I should paste it to my computer right?
can't I just restore my root just by restoring my back ups?
---------- Post added at 10:30 AM ---------- Previous post was at 10:12 AM ----------
I'm from the Philippines and I bought it here but the baseband version is not match from my country...
PH(Open Line)-G530HDCU1AOA2
My phone is G530HXCU1AOA2
Should it be the same version?
If that's the case what should I install then?

Mr.IDK said:
I'll try installing custom recovery... but I'll still proceed flashing new stock rom to remove the boot animation...
currently I'm backing up my new user+system apps and newer versions... I should paste it to my computer right?
can't I just restore my root just by restoring my back ups?
---------- Post added at 10:30 AM ---------- Previous post was at 10:12 AM ----------
I'm from the Philippines and I bought it here but the baseband version is not match from my country...
PH(Open Line)-G530HDCU1AOA2
My phone is G530HXCU1AOA2
Should it be the same version?
If that's the case what should I install then?
Click to expand...
Click to collapse
Be sure to make App backup by using titanium backup. Thats the best app for backing up apps.
I have no Idea. I had kazhkistan firmware before. And Now I have indian firmware. Even though I am not from any of these countries. It worked for me at least. So, since you have the same 530H. Theoretically It should work for you too. I dont know.:silly:

Kade Sonix said:
Be sure to make App backup by using titanium backup. Thats the best app for backing up apps.
I have no Idea. I had kazhkistan firmware before. And Now I have indian firmware. Even though I am not from any of these countries. It worked for me at least. So, since you have the same 530H. Theoretically It should work for you too. I dont know.:silly:
Click to expand...
Click to collapse
It's recommended to factory reset right? but how can I moved my backup?
I'm afraid of bricking because this phone is new and only few are tested on their phones...
sorry for noob questions but please can you teach me how to backup properly... I'm done with my backup using titanium backup but you said it recommended to factory reset and that would delete my backup in my phone...

Mr.IDK said:
It's recommended to factory reset right? but how can I moved my backup?
I'm afraid of bricking because this phone is new and only few are tested on their phones...
sorry for noob questions but please can you teach me how to backup properly... I'm done with my backup using titanium backup but you said it recommended to factory reset and that would delete my backup in my phone...
Click to expand...
Click to collapse
It doesn't matter... I know it...

Mr.IDK said:
It's recommended to factory reset right? but how can I moved my backup?
I'm afraid of bricking because this phone is new and only few are tested on their phones...
sorry for noob questions but please can you teach me how to backup properly... I'm done with my backup using titanium backup but you said it recommended to factory reset and that would delete my backup in my phone...
Click to expand...
Click to collapse
Copy the titanium backup folder to computer.

LE 1S Custom Kernel(Fully working)

This thread is to inform that a Custom Kernel has been released
And is completely Working
P.S - For the people who even said that fingerprint source isn't compiling
Try this!
Thanks to a friend and developer for our phone Nishanth
He is the developer of the AOPS ROM for our device.
Thread link : http://forum.le.com/in/index.php?th...s-rom-for-le1s-with-themes.17151/#post-122923
ROM Review by vaisakh -
https://youtu.be/5e-G8BIxrus
Its all fixed and compiles perfectly.
The link for the custom kernel is on github for all the Le1s developers out there
Can contribute for the development of the device.
https://github.com/psycho-source/android_kernel_leeco_psycho-kernel_MT6795
ZIMAGE file download link
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0

Is there any chance of getting cm14 with this??

As with one of the posts made over at leeco.re the forum post link is broken, you can't always grab a link as part of a larger text selection, you need to right click on the link and select to copy the link.
Also, it would be nice to have an actual kernel to download for those who don't have a suitable build environment, nothing I have found with your info points to or provides a downloadable kernel which suggests that as of now it is vapour-ware.

Nameless One said:
As with one of the posts made over at leeco.re the forum post link is broken, you can't always grab a link as part of a larger text selection, you need to right click on the link and select to copy the link.
Also, it would be nice to have an actual kernel to download for those who don't have a suitable build environment, nothing I have found with your info points to or provides a downloadable kernel which suggests that as of now it is vapour-ware.
Click to expand...
Click to collapse
Hey, Thanks for replying! I can provide u the zImage only as I am not yet able to flash just the kernel zImage directly from zip via recovery so i simply create a new boot.img and flash tht! If u want then I can simply provide you with zImage also! I will post the link here soon!
Thanks
---------- Post added at 05:37 AM ---------- Previous post was at 05:19 AM ----------
Here you go! the zImage compiled one!
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
For people who dont know whats zImage or what is the difference between zImage and Boot.img
Please please dont flash it directly via recovery as img file u will surely mess your boot partition and i wont be held responsible for tht!
Rest all if u put it in ur boot img or flash via any kernel flasher or whatever app u can then it will 100% work with no problems!!!

Thanks, I'll just have to dust the cobwebs off the brain cells I'll need to use to get this on the phone

Please develope a good cm 14.1 rom anyone here

1harsh1 said:
How to compile the kernel source and build rom ?
Please make a tutorial of it ..
Click to expand...
Click to collapse
If you have no idea of linux or ROM development it is recommended that you don't do anything as it will be a waste of time for you

Does this custom kernel supports VOlte

Thnx for sharing my video.
Abhi_ said:
This thread is to inform that a Custom Kernel has been released
And is completely Working
P.S - For the people who even said that fingerprint source isn't compiling
Try this!
Thanks to a friend and developer for our phone Nishin
He is the developer of the AOPS ROM for our device.
Thread link : http://forum.le.com/in/index.php?th...s-rom-for-le1s-with-themes.17151/#post-122923
ROM Review by vaisakh -
https://youtu.be/5e-G8BIxrus
Its all fixed and compiles perfectly.
The link for the custom kernel is on github for all the Le1s developers out there
Can contribute for the development of the device.
https://github.com/psycho-source/android_kernel_leeco_psycho-kernel_MT6795
ZIMAGE file download link
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
Click to expand...
Click to collapse
But although, I personally feel ashamed cuz of that video. AOPS ROM neva gave me 6hrs sot, the dev asked me to say so, so that he could get people to download it. AOPS is nothing more that AOSP with material UP theme and few more tweaks. Anyways, thnx for sharing

It would be best if you could do a step by step guide for some newbies who doesnt know how is the procedure on flashing/installing the kernel on their phone...

post an app for flashing
nishsin26 said:
Hey, Thanks for replying! I can provide u the zImage only as I am not yet able to flash just the kernel zImage directly from zip via recovery so i simply create a new boot.img and flash tht! If u want then I can simply provide you with zImage also! I will post the link here soon!
Thanks
---------- Post added at 05:37 AM ---------- Previous post was at 05:19 AM ----------
Here you go! the zImage compiled one!
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
For people who dont know whats zImage or what is the difference between zImage and Boot.img
Please please dont flash it directly via recovery as img file u will surely mess your boot partition and i wont be held responsible for tht!
Rest all if u put it in ur boot img or flash via any kernel flasher or whatever app u can then it will 100% work with no problems!!!
Click to expand...
Click to collapse
it would be better if you name an app for flashing kernel

blackode said:
It would be best if you could do a step by step guide for some newbies who doesnt know how is the procedure on flashing/installing the kernel on their phone...
Click to expand...
Click to collapse
huh this is not a procedure or anything
this is a kernel required to build a ROM

Ok so my friend flashed the zimage from recovery and the phone is not booting up. I tried to recover it by flashing the stock rom with flashtool but no effect. Can't even go to either recovery or fastboot. Help me to get it back working. Thanks in advance.

z1_nile said:
Ok so my friend flashed the zimage from recovery and the phone is not booting up. I tried to recover it by flashing the stock rom with flashtool but no effect. Can't even go to either recovery or fastboot. Help me to get it back working. Thanks in advance.
Click to expand...
Click to collapse
Seriously? How you flashed zImage via recovery?
Flashed it in boot partition??
I already warned u guys i guess not to do it!
Flash stock boot.img via fastboot

nishsin26 said:
Seriously? How you flashed zImage via recovery?
Flashed it in boot partition??
I already warned u guys i guess not to do it!
Flash stock boot.img via fastboot
Click to expand...
Click to collapse
I don't even own the device he did renamed the file with root explorer and flashed as a kernel lol. But i tried flashing whole firmware through sp flashtool but the device wasn't booting. Got it working by completely formatting through flashoot (even the bootloader). It did wiped his imeis too lol. but got them fixed with engineering mode. so chill everything is under control. Hope you build a great kernel for that device.

idiot said:
But although, I personally feel ashamed cuz of that video. AOPS ROM neva gave me 6hrs sot, the dev asked me to say so, so that he could get people to download it. AOPS is nothing more that AOSP with material UP theme and few more tweaks. Anyways, thnx for sharing
Click to expand...
Click to collapse
LOL

z1_nile said:
I don't even own the device he did renamed the file with root explorer and flashed as a kernel lol. But i tried flashing whole firmware through sp flashtool but the device wasn't booting. Got it working by completely formatting through flashoot (even the bootloader). It did wiped his imeis too lol. but got them fixed with engineering mode. so chill everything is under control. Hope you build a great kernel for that device.
Click to expand...
Click to collapse
Man I have the same problem can u please help me please give steps

Aryadeadpool said:
Man I have the same problem can u please help me please give steps
Click to expand...
Click to collapse
Ok don't worry help is here,
1) Get your firmware. It will contain rom, flashtool, drivers. Install drivers first, install minimal adb and fast boot drivers too.
2) Open flashtool got to advanced format options it's on the other tab. Select complete wipe include bootloader.
3) Flash the rom, it'll have a txt page with instruction about it or Google it if you still have problems ask me.
4) wait till the process ends and your phone will be back.
5) You will have no imei(s) in your device and it won't recognize sim card. Get toolhero app it will set you imei(s) and for God's sake write them somewhere you can reach anytime cause they will disappear everytime you factory reset/wipe/change roms/ and it's a stupid thing that toolhero requires Internet to set the imei(s) so keep a Hotspot or WiFi near while next time you experiment with your device. Hope this helps.

z1_nile said:
Ok don't worry help is here,
1) Get your firmware. It will contain rom, flashtool, drivers. Install drivers first, install minimal adb and fast boot drivers too.
2) Open flashtool got to advanced format options it's on the other tab. Select complete wipe include bootloader.
3) Flash the rom, it'll have a txt page with instruction about it or Google it if you still have problems ask me.
4) wait till the process ends and your phone will be back.
5) You will have no imei(s) in your device and it won't recognize sim card. Get toolhero app it will set you imei(s) and for God's sake write them somewhere you can reach anytime cause they will disappear everytime you factory reset/wipe/change roms/ and it's a stupid thing that toolhero requires Internet to set the imei(s) so keep a Hotspot or WiFi near while next time you experiment with your device. Hope this helps.
Click to expand...
Click to collapse
some brom error is coming constantly when I click on start after 10 seconds exactly
please help and specify the scatter and download agent

Aryadeadpool said:
some brom error is coming constantly when I click on start after 10 seconds exactly
please help and specify the scatter and download agent
Click to expand...
Click to collapse
OK which tutorial of flashing you followed?
Explain each step and does it include Auth file?

I want to remove root/TWRP/lock bootloader, how?

I want to remove Magisk, remove TWRP and relock bootloader. Basically, I want to restore the phone to it's original state. How do I do it? Thanks in advance.

I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
also you will need to use the stock ROM and not a custom one.
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=att...kxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8. 0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters on what u did it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can

What about Magisk and TWRP and unlocked bootloader, it will all be resolved?

Thanks, I did it.