Database Users

[STOCK][ODIN][TARs][3/17/15]Latest - N910PVPU1BOB7 Stock TAR

UPDATED 3/17/15 - Added OB7 tar
I didn't see a decent link to the stock NIE/NK2/OB7 tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1BOB7 tar - https://www.androidfilehost.com/?fid=95916177934542777
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip, you'll have a file called N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy

Old TARs
N910PVPU1ANK2 tar - https://www.androidfilehost.com/?fid=95853297432265112
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590

Thanks for this my man

Thank you sir.

This will come in handy so many times to so many people out here. Thanks.

I've been looking for a decent mirror forever. Thanks!

darshiki said:
I've been looking for a decent mirror forever. Thanks!
Click to expand...
Click to collapse
I'm a bit hurt, what was wrong with mine?

Thank you Sir

shabbypenguin said:
I'm a bit hurt, what was wrong with mine?
Click to expand...
Click to collapse
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.

There's a few already, in general where these threads belong. Moving this there.

-viperboy- said:
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.
Click to expand...
Click to collapse
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.

Will this wipe me to a clean slate

leandrae400 said:
Will this wipe me to a clean slate
Click to expand...
Click to collapse
Yes it will give you a fresh clean roms it but everything back to stock no root... But if u are rooted and do this it still doesn't zero out your Knox being tripped if u did root ur phone my on the thanks I hit the wrong button
Sent from my SM-N910P using Tapatalk

shabbypenguin said:
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.
Click to expand...
Click to collapse
Ah, the good old days of the T-Mobile CF-Auto-Root It feels like so long ago...lol.

Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior rom
---------- Post added at 02:51 AM ---------- Previous post was at 02:36 AM ----------
I only ask cuz i got a force close on set up. Even after i did a master clear

-viperboy- said:
I didn't see a decent link to the stock NIE tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1ANIE_N910PSPT1ANIE_SPR.zip, you'll have a file called N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy
Click to expand...
Click to collapse
Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior

Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk

sliverr7x said:
Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway

rcmartin57 said:
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway
Click to expand...
Click to collapse
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.

tx_dbs_tx said:
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.
Click to expand...
Click to collapse
Thanks forbyhe insight. Knowing this i flashed this rom and everything is running smoothly

How can I downgrade by 1 version?

Hi.
I've just updated to version 5.0 and though in general the interface does look better. I'm not liking it. Pet hates are the way you cant see what the notification is or says unless you go past the lock screen and onto the home screen. And also my battery is now lasting a full day at work where before it would last me all day easily. How can I revert back one update?

Stock firmware from sammobile, and ODIN to flash it

Hi. Thanks. Do you know what the previous version was? and do i just plug my phone with odin running and then flash the phone? no need to root or prepare the phone in any way?

I installed the older version and followed the instructions on sammobile.com and now my phones sitting on the initial load up of the phone. is this normal

Seany_Blitz said:
I installed the older version and followed the instructions on sammobile.com and now my phones sitting on the initial load up of the phone. is this normal
Click to expand...
Click to collapse
Nope.
Do a factory reset from stock recovery (you must pull off battery).
VOL+ and HOME and Power buttons together to enter.

Seany_Blitz said:
I installed the older version and followed the instructions on sammobile.com and now my phones sitting on the initial load up of the phone. is this normal
Click to expand...
Click to collapse
Yea, you need to pull the battery / boot to recovery > factory reset, happens to a lot of people after flashing with ODIN

"1)Start phone in download mode
2)Flash KK firmware.
3)Your phone will not start normally either. Bootloop guaranted. Don't worry.
4)Remove battery and put in again.
5)Do a factory reset from STOCK recovery
6)Flash again KK firmware
7)Phone will start normally, you can start customization and other stuff like rooting or daily using."

didi_ghost said:
"1)Start phone in download mode
2)Flash KK firmware.
3)Your phone will not start normally either. Bootloop guaranted. Don't worry.
4)Remove battery and put in again.
5)Do a factory reset from STOCK recovery
6)Flash again KK firmware
7)Phone will start normally, you can start customization and other stuff like rooting or daily using."
Click to expand...
Click to collapse
You quoted me from different thread thx
OP is very quiet, Hope he is not calling his guarantee services

Nah I got it working again thanks. Such a b**lache re-configuring my phone back to how I exactly have it

qubbus said:
You quoted me from different thread thx
OP is very quiet, Hope he is not calling his guarantee services
Click to expand...
Click to collapse
You're welcome, it was the best answer of "how to downgrade" here in XDA so it deserve to be quoted everywhere

didi_ghost said:
You're welcome, it was the best answer of "how to downgrade" here in XDA so it deserve to be quoted everywhere
Click to expand...
Click to collapse
THX!
Sometimes the simplest way is the best way I just did it in that way when I've downgraded, so I wanted to share.

Seany_Blitz said:
Hi.
I've just updated to version 5.0 and though in general the interface does look better. I'm not liking it. Pet hates are the way you cant see what the notification is or says unless you go past the lock screen and onto the home screen. And also my battery is now lasting a full day at work where before it would last me all day easily. How can I revert back one update?
Click to expand...
Click to collapse
You can change the settings so that all notification contents are shown on lockscreen. my battery is the same if not better, too bad for you.
Also all questions are asked in Q&A.

(Soft) Bricked Samsung Galaxy S5 Verizon

"Root my phone" she says, "It will be great" she says...That is what my girlfriend asked me but now I have her phone bricked and can't get it running again. Have rooted multiple android devices before but this one has stumped me. Tried to get old 4.4.4 OS on it using Odin and now I cannot get any OS on it. Even the original stock OS I cannot get loaded on, which I would happily take.
Things you should know:
-Samsung Galaxy S5 Verizon edition
-Using Odin v 3.10.06
-Using md5 and .tar SM-G900V
-Phone can go into Recovery/Download Mode
-Odin sees phone and recognizes it, but when trying to load on OS it gives error failed.
Ask me for any other info, I would be happy to get it rooted, not rooted, custom ROM, just anything to get it running again.
Thank you very much.

TUTRider said:
"Root my phone" she says, "It will be great" she says...That is what my girlfriend asked me but now I have her phone bricked and can't get it running again. Have rooted multiple android devices before but this one has stumped me. Tried to get old 4.4.4 OS on it using Odin and now I cannot get any OS on it. Even the original stock OS I cannot get loaded on, which I would happily take.
Things you should know:
-Samsung Galaxy S5 Verizon edition
-Using Odin v 3.10.06
-Using md5 and .tar SM-G900V
-Phone can go into Recovery/Download Mode
-Odin sees phone and recognizes it, but when trying to load on OS it gives error failed.
Ask me for any other info, I would be happy to get it rooted, not rooted, custom ROM, just anything to get it running again.
Thank you very much.
Click to expand...
Click to collapse
Which build was the phone running? OG5 and the one before it can't be rooted/downgraded to my knowledge...
I also only stick w odin 3.09...been using it for years with no problems..

roadblock217 said:
Which build was the phone running? OG5 and the one before it can't be rooted/downgraded to my knowledge...
I also only stick w odin 3.09...been using it for years with no problems..
Click to expand...
Click to collapse
it was on 5.0 I believe, and now am using 3.09. Thanks for the info.
Anything else you would recommend?

TUTRider said:
it was on 5.0 I believe, and now am using 3.09. Thanks for the info.
Anything else you would recommend?
Click to expand...
Click to collapse
Need to know exactly which build the phone was on...its in settings

roadblock217 said:
Need to know exactly which build the phone was on...its in settings
Click to expand...
Click to collapse
I do not know, I know that is super unhelpful. But all it can do at this point is go into download mode and recovery mode.

TUTRider said:
I do not know, I know that is super unhelpful. But all it can do at this point is go into download mode and recovery mode.
Click to expand...
Click to collapse
lol no worries. To me, it seems like the phone was on OG5 (latest) or the one before that, which disables going BACK to an older build to be able to root...Are you using ODIN properly (sorry, I have to ask)
ALL files I've flashed go in the AP slot...so try downloading the top file of the two (seeing as it prob. isnt rootable anyway) http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
download, unzip if needed, and try flashing that in the AP slot when in ODIN...see what that does..

roadblock217 said:
lol no worries. To me, it seems like the phone was on OG5 (latest) or the one before that, which disables going BACK to an older build to be able to root...Are you using ODIN properly (sorry, I have to ask)
ALL files I've flashed go in the AP slot...so try downloading the top file of the two (seeing as it prob. isnt rootable anyway) http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
download, unzip if needed, and try flashing that in the AP slot when in ODIN...see what that does..
Click to expand...
Click to collapse
I will try it and keep you posted. I believe I am using it correctly, phone is connecting and it will start things but then the fail message comes up.

TUTRider said:
I will try it and keep you posted. I believe I am using it correctly, phone is connecting and it will start things but then the fail message comes up.
Click to expand...
Click to collapse
I know, just figured I'd make sure. I've messed up with it alot myself, trial and error.
Yeah if the error message pops up I'm pretty sure it's one of the 2 new updates...it kills root and backwards flashing

roadblock217 said:
I know, just figured I'd make sure. I've messed up with it alot myself, trial and error.
Yeah if the error message pops up I'm pretty sure it's one of the 2 new updates...it kills root and backwards flashing
Click to expand...
Click to collapse
It worked. Thanks you so so so much! Now I know I just got myself out of a hole but...any chance I can get this thing rooted? or am I better off just leaving it as is?

TUTRider said:
It worked. Thanks you so so so much! Now I know I just got myself out of a hole but...any chance I can get this thing rooted? or am I better off just leaving it as is?
Click to expand...
Click to collapse
As he said in his first response to you, the OE1 and OG5 builds cannot be rooted, and likely will never be able to be rooted.

TUTRider said:
It worked. Thanks you so so so much! Now I know I just got myself out of a hole but...any chance I can get this thing rooted? or am I better off just leaving it as is?
Click to expand...
Click to collapse
Glad that worked at least...but yeah you won't be able to root or anything until (if) they find an exploit..only time will tell I guess at this point....BUT you have a phone that works at least...

landshark68 said:
As he said in his first response to you, the OE1 and OG5 builds cannot be rooted, and likely will never be able to be rooted.
Click to expand...
Click to collapse
OK. Thank you very much!

I happily did exactly what TUTRider did, from trying to root, to bricking, then using roadblock's 6.0.1 files to unbrick, but I'm still getting stuck on the Galaxy splash screen. Odin 3.09 gave the load a PASS, and I 100% had 6.0.1 on it before trying to root. Is there something I could be doing horribly wrong, I'm fairly new to Android rooting, though I have a lot of experience with iOS jailbreaking.

fabledlight said:
I happily did exactly what TUTRider did, from trying to root, to bricking, then using roadblock's 6.0.1 files to unbrick, but I'm still getting stuck on the Galaxy splash screen. Odin 3.09 gave the load a PASS, and I 100% had 6.0.1 on it before trying to root. Is there something I could be doing horribly wrong, I'm fairly new to Android rooting, though I have a lot of experience with iOS jailbreaking.
Click to expand...
Click to collapse
If you're trying to root, you have to be on Lollipop. Can't root MM, but it IS possible to get on a pre-rooted ROM.
Go back to Lollipop, and follow this: http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
Once you're on Lollipop and rooted, if you can get your bootloader unlocked, then you can upgrade to a pre-rooted 6.0.1 ROM.
Go here to see if you can unlock. (Some phones can, some can't. Cross your fingers!) Read the "Warnings" section carefully, and look to see if your cid # starts with 15.
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
If you can unlock, follow the instructions on that page carefully to do it, and then follow these instructions for going to 6.0.1 on unlocked bootloader:
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784

TUTRider said:
it was on 5.0 I believe, and now am using 3.09. Thanks for the info.
Anything else you would recommend?
Click to expand...
Click to collapse
Yes. We would need to know which 5.0/LP you were on. Such as 0A8, OC4, OD5, etc...as the person posted before me. You cannotODIN back to KK(4 4.2/4.4.4) if you were on OE1 and above...if you know exactly what version you were on, I'd suggest you grab that tar and odin. Best of luck bud and let us know the Version you were on before you attemptedto root.

Root files for t-mobile s7

*Edited. I uploaded which factory firmware worked for me on a t-mobile s7 as of 10/30/2016 to dropbox if anyone needs it.
https://www.dropbox.com/sh/bjz0du5b6kyt3g7/AADETkXwGhpRMSQoI2bmrupBa?dl=0
These are what worked for me. Included is a link to the factory firmware if you screw something up.
Turn on developer options/Usb debugging. After installing your Samsung USB drivers http://stockroms.net/file/Drivers/Samsung/SAMSUNG_USB_Driver_for_Mobile_Phones.exe , plug it in. Click allow on your phone.
Put it in download mode. Open odin, click AP and choose the .tar file. Click start.
After reboot unlock the phone and open fastboot folder. Double click root.
After reboot, transfer busybox.apk or download busybox. When setting up busybox, make sure to install it to /system/xbin. Not /su/xbin.
Something goes wrong, use the same odin to flash the firmware you download from the included link. I would have included the files but their 2.1 gb.
Again, this is just what worked for me.
What follows rooting is your choice.

this kind of rooting method cause lag on the phone?? because i rooted a g935t time ago and it was impossible to use because the constant lags in the interface

Serge Winters said:
this kind of rooting method cause lag on the phone?? because i rooted a g935t time ago and it was impossible to use because the constant lags in the interface
Click to expand...
Click to collapse
After you root it it automatically sets your governor as performance. It needs to be made interactive before you do anything.
This is what I did to fix the lag.
http://forum.xda-developers.com/tmobile-galaxy-s7/help/setcpu-root-t3488013

does this use the eng kernel?

blane3298 said:
does this use the eng kernel?
Click to expand...
Click to collapse
Yes sir.
If you want you can follow this steps for a completely free lag phone.
1. After flashing the eng kernel, go to PlayStore and Download Kernel Adiutor and set Gov to Interactive on both the Big and Little.
2. Download Flashfire and flash Echoed Rom.
I'm using this on my T-Mobile Vatiant.

Guides do not belong in development. Please refer to the rules for posting in development before posting in there.
THREAD MOVED

i am getting a boot loop at the tmobile logo accompanied by vibrating seemingly randomly. the only answer seems to be to flash the stock file you provide. I wonder why its not working for me. thanks for your efforts either way, clear and simple.

mcmasterp said:
i am getting a boot loop at the tmobile logo accompanied by vibrating seemingly randomly. the only answer seems to be to flash the stock file you provide. I wonder why its not working for me. thanks for your efforts either way, clear and simple.
Click to expand...
Click to collapse
it was because the phone updated to the pki or whatever released on 11/5/2016. I used all your files in odin at once to downgrade, then was able to proceed perfectly. thanks again

Thanks for the files. It's a shame though this device has been secured as much as it has with little development. I've always had phones with full root, customization, and control. With the root methods so far, I mean it works but there's just too many cons and I've tried everything to get performance back post root. Went back to stock in the mean time.

Is this the best and only way to Root the Tmobile variant of the S7?

SantinoInc said:
Is this the best and only way to Root the Tmobile variant of the S7?
Click to expand...
Click to collapse
Yes sir, right now it is the only way.

The Illest 619 said:
Thanks for the files. It's a shame though this device has been secured as much as it has with little development. I've always had phones with full root, customization, and control. With the root methods so far, I mean it works but there's just too many cons and I've tried everything to get performance back post root. Went back to stock in the mean time.
Click to expand...
Click to collapse
Did you try the Echo ROM? I've been reading that there is no lag in Echo.

Is anyone having issue with WIFI after installing this. For some reason my phone can't retain wifi password

+1 to WiFi passwords not saving.

Glax100 said:
+1 to WiFi passwords not saving.
Click to expand...
Click to collapse
Theres a way to fix that you need build prop editer and search secure storage and change it to false I getting this off my memory sorry if it misleads you

Thanks
Worked perfectly, thanks!
TH3B0SS said:
Theres a way to fix that you need build prop editer and search secure storage and change it to false I getting this off my memory sorry if it misleads you
Click to expand...
Click to collapse

Glax100 said:
Worked perfectly, thanks!
Click to expand...
Click to collapse
Np
---------- Post added at 05:30 PM ---------- Previous post was at 04:40 PM ----------
dhman06 said:
Is anyone having issue with WIFI after installing this. For some reason my phone can't retain wifi password
Click to expand...
Click to collapse
Read the fix I gave

What exactly is "fastboot"? I understand the process up to that point, but after that I'm at a loss.

Root
boobteg2 said:
*Edited. I uploaded which factory firmware worked for me on a t-mobile s7 as of 10/30/2016 to dropbox if anyone needs it.
These are what worked for me. Included is a link to the factory firmware if you screw something up.
Turn on developer options/Usb debugging. After installing your Samsung USB drivers , plug it in. Click allow on your phone.
Put it in download mode. Open odin, click AP and choose the .tar file. Click start.
After reboot unlock the phone and open fastboot folder. Double click root.
After reboot, transfer busybox.apk or download busybox. When setting up busybox, make sure to install it to /system/xbin. Not /su/xbin.
Something goes wrong, use the same odin to flash the firmware you download from the included link. I would have included the files but their 2.1 gb.
Again, this is just what worked for me.
What follows rooting is your choice.
Click to expand...
Click to collapse
Does it work for TMobile G930T with PK1 november update?

sardor_x_z said:
Does it work for TMobile G930T with PK1 november update?
Click to expand...
Click to collapse
Yes, It worked for me.

Possible root for Tab S2 SM-T818V and SM-T818A aka SM-T819

I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.

I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?

le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.

ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk

le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.

ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk

There's been 10 downloads yet no one has come back with any reports?

ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...

burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore

le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.

ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.

ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either

le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?

ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.

i have the AQA3 as well, which files should i use first to help with this?

rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?

youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results