*Edited. I uploaded which factory firmware worked for me on a t-mobile s7 as of 10/30/2016 to dropbox if anyone needs it.
https://www.dropbox.com/sh/bjz0du5b6kyt3g7/AADETkXwGhpRMSQoI2bmrupBa?dl=0
These are what worked for me. Included is a link to the factory firmware if you screw something up.
Turn on developer options/Usb debugging. After installing your Samsung USB drivers http://stockroms.net/file/Drivers/Samsung/SAMSUNG_USB_Driver_for_Mobile_Phones.exe , plug it in. Click allow on your phone.
Put it in download mode. Open odin, click AP and choose the .tar file. Click start.
After reboot unlock the phone and open fastboot folder. Double click root.
After reboot, transfer busybox.apk or download busybox. When setting up busybox, make sure to install it to /system/xbin. Not /su/xbin.
Something goes wrong, use the same odin to flash the firmware you download from the included link. I would have included the files but their 2.1 gb.
Again, this is just what worked for me.
What follows rooting is your choice.
this kind of rooting method cause lag on the phone?? because i rooted a g935t time ago and it was impossible to use because the constant lags in the interface
Serge Winters said:
this kind of rooting method cause lag on the phone?? because i rooted a g935t time ago and it was impossible to use because the constant lags in the interface
Click to expand...
Click to collapse
After you root it it automatically sets your governor as performance. It needs to be made interactive before you do anything.
This is what I did to fix the lag.
http://forum.xda-developers.com/tmobile-galaxy-s7/help/setcpu-root-t3488013
does this use the eng kernel?
blane3298 said:
does this use the eng kernel?
Click to expand...
Click to collapse
Yes sir.
If you want you can follow this steps for a completely free lag phone.
1. After flashing the eng kernel, go to PlayStore and Download Kernel Adiutor and set Gov to Interactive on both the Big and Little.
2. Download Flashfire and flash Echoed Rom.
I'm using this on my T-Mobile Vatiant.
Guides do not belong in development. Please refer to the rules for posting in development before posting in there.
THREAD MOVED
i am getting a boot loop at the tmobile logo accompanied by vibrating seemingly randomly. the only answer seems to be to flash the stock file you provide. I wonder why its not working for me. thanks for your efforts either way, clear and simple.
mcmasterp said:
i am getting a boot loop at the tmobile logo accompanied by vibrating seemingly randomly. the only answer seems to be to flash the stock file you provide. I wonder why its not working for me. thanks for your efforts either way, clear and simple.
Click to expand...
Click to collapse
it was because the phone updated to the pki or whatever released on 11/5/2016. I used all your files in odin at once to downgrade, then was able to proceed perfectly. thanks again
Thanks for the files. It's a shame though this device has been secured as much as it has with little development. I've always had phones with full root, customization, and control. With the root methods so far, I mean it works but there's just too many cons and I've tried everything to get performance back post root. Went back to stock in the mean time.
Is this the best and only way to Root the Tmobile variant of the S7?
SantinoInc said:
Is this the best and only way to Root the Tmobile variant of the S7?
Click to expand...
Click to collapse
Yes sir, right now it is the only way.
The Illest 619 said:
Thanks for the files. It's a shame though this device has been secured as much as it has with little development. I've always had phones with full root, customization, and control. With the root methods so far, I mean it works but there's just too many cons and I've tried everything to get performance back post root. Went back to stock in the mean time.
Click to expand...
Click to collapse
Did you try the Echo ROM? I've been reading that there is no lag in Echo.
Is anyone having issue with WIFI after installing this. For some reason my phone can't retain wifi password
+1 to WiFi passwords not saving.
Glax100 said:
+1 to WiFi passwords not saving.
Click to expand...
Click to collapse
Theres a way to fix that you need build prop editer and search secure storage and change it to false I getting this off my memory sorry if it misleads you
Thanks
Worked perfectly, thanks!
TH3B0SS said:
Theres a way to fix that you need build prop editer and search secure storage and change it to false I getting this off my memory sorry if it misleads you
Click to expand...
Click to collapse
Glax100 said:
Worked perfectly, thanks!
Click to expand...
Click to collapse
Np
---------- Post added at 05:30 PM ---------- Previous post was at 04:40 PM ----------
dhman06 said:
Is anyone having issue with WIFI after installing this. For some reason my phone can't retain wifi password
Click to expand...
Click to collapse
Read the fix I gave
What exactly is "fastboot"? I understand the process up to that point, but after that I'm at a loss.
Root
boobteg2 said:
*Edited. I uploaded which factory firmware worked for me on a t-mobile s7 as of 10/30/2016 to dropbox if anyone needs it.
These are what worked for me. Included is a link to the factory firmware if you screw something up.
Turn on developer options/Usb debugging. After installing your Samsung USB drivers , plug it in. Click allow on your phone.
Put it in download mode. Open odin, click AP and choose the .tar file. Click start.
After reboot unlock the phone and open fastboot folder. Double click root.
After reboot, transfer busybox.apk or download busybox. When setting up busybox, make sure to install it to /system/xbin. Not /su/xbin.
Something goes wrong, use the same odin to flash the firmware you download from the included link. I would have included the files but their 2.1 gb.
Again, this is just what worked for me.
What follows rooting is your choice.
Click to expand...
Click to collapse
Does it work for TMobile G930T with PK1 november update?
sardor_x_z said:
Does it work for TMobile G930T with PK1 november update?
Click to expand...
Click to collapse
Yes, It worked for me.
Related
"Root my phone" she says, "It will be great" she says...That is what my girlfriend asked me but now I have her phone bricked and can't get it running again. Have rooted multiple android devices before but this one has stumped me. Tried to get old 4.4.4 OS on it using Odin and now I cannot get any OS on it. Even the original stock OS I cannot get loaded on, which I would happily take.
Things you should know:
-Samsung Galaxy S5 Verizon edition
-Using Odin v 3.10.06
-Using md5 and .tar SM-G900V
-Phone can go into Recovery/Download Mode
-Odin sees phone and recognizes it, but when trying to load on OS it gives error failed.
Ask me for any other info, I would be happy to get it rooted, not rooted, custom ROM, just anything to get it running again.
Thank you very much.
TUTRider said:
"Root my phone" she says, "It will be great" she says...That is what my girlfriend asked me but now I have her phone bricked and can't get it running again. Have rooted multiple android devices before but this one has stumped me. Tried to get old 4.4.4 OS on it using Odin and now I cannot get any OS on it. Even the original stock OS I cannot get loaded on, which I would happily take.
Things you should know:
-Samsung Galaxy S5 Verizon edition
-Using Odin v 3.10.06
-Using md5 and .tar SM-G900V
-Phone can go into Recovery/Download Mode
-Odin sees phone and recognizes it, but when trying to load on OS it gives error failed.
Ask me for any other info, I would be happy to get it rooted, not rooted, custom ROM, just anything to get it running again.
Thank you very much.
Click to expand...
Click to collapse
Which build was the phone running? OG5 and the one before it can't be rooted/downgraded to my knowledge...
I also only stick w odin 3.09...been using it for years with no problems..
roadblock217 said:
Which build was the phone running? OG5 and the one before it can't be rooted/downgraded to my knowledge...
I also only stick w odin 3.09...been using it for years with no problems..
Click to expand...
Click to collapse
it was on 5.0 I believe, and now am using 3.09. Thanks for the info.
Anything else you would recommend?
TUTRider said:
it was on 5.0 I believe, and now am using 3.09. Thanks for the info.
Anything else you would recommend?
Click to expand...
Click to collapse
Need to know exactly which build the phone was on...its in settings
roadblock217 said:
Need to know exactly which build the phone was on...its in settings
Click to expand...
Click to collapse
I do not know, I know that is super unhelpful. But all it can do at this point is go into download mode and recovery mode.
TUTRider said:
I do not know, I know that is super unhelpful. But all it can do at this point is go into download mode and recovery mode.
Click to expand...
Click to collapse
lol no worries. To me, it seems like the phone was on OG5 (latest) or the one before that, which disables going BACK to an older build to be able to root...Are you using ODIN properly (sorry, I have to ask)
ALL files I've flashed go in the AP slot...so try downloading the top file of the two (seeing as it prob. isnt rootable anyway) http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
download, unzip if needed, and try flashing that in the AP slot when in ODIN...see what that does..
roadblock217 said:
lol no worries. To me, it seems like the phone was on OG5 (latest) or the one before that, which disables going BACK to an older build to be able to root...Are you using ODIN properly (sorry, I have to ask)
ALL files I've flashed go in the AP slot...so try downloading the top file of the two (seeing as it prob. isnt rootable anyway) http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
download, unzip if needed, and try flashing that in the AP slot when in ODIN...see what that does..
Click to expand...
Click to collapse
I will try it and keep you posted. I believe I am using it correctly, phone is connecting and it will start things but then the fail message comes up.
TUTRider said:
I will try it and keep you posted. I believe I am using it correctly, phone is connecting and it will start things but then the fail message comes up.
Click to expand...
Click to collapse
I know, just figured I'd make sure. I've messed up with it alot myself, trial and error.
Yeah if the error message pops up I'm pretty sure it's one of the 2 new updates...it kills root and backwards flashing
roadblock217 said:
I know, just figured I'd make sure. I've messed up with it alot myself, trial and error.
Yeah if the error message pops up I'm pretty sure it's one of the 2 new updates...it kills root and backwards flashing
Click to expand...
Click to collapse
It worked. Thanks you so so so much! Now I know I just got myself out of a hole but...any chance I can get this thing rooted? or am I better off just leaving it as is?
TUTRider said:
It worked. Thanks you so so so much! Now I know I just got myself out of a hole but...any chance I can get this thing rooted? or am I better off just leaving it as is?
Click to expand...
Click to collapse
As he said in his first response to you, the OE1 and OG5 builds cannot be rooted, and likely will never be able to be rooted.
TUTRider said:
It worked. Thanks you so so so much! Now I know I just got myself out of a hole but...any chance I can get this thing rooted? or am I better off just leaving it as is?
Click to expand...
Click to collapse
Glad that worked at least...but yeah you won't be able to root or anything until (if) they find an exploit..only time will tell I guess at this point....BUT you have a phone that works at least...
landshark68 said:
As he said in his first response to you, the OE1 and OG5 builds cannot be rooted, and likely will never be able to be rooted.
Click to expand...
Click to collapse
OK. Thank you very much!
I happily did exactly what TUTRider did, from trying to root, to bricking, then using roadblock's 6.0.1 files to unbrick, but I'm still getting stuck on the Galaxy splash screen. Odin 3.09 gave the load a PASS, and I 100% had 6.0.1 on it before trying to root. Is there something I could be doing horribly wrong, I'm fairly new to Android rooting, though I have a lot of experience with iOS jailbreaking.
fabledlight said:
I happily did exactly what TUTRider did, from trying to root, to bricking, then using roadblock's 6.0.1 files to unbrick, but I'm still getting stuck on the Galaxy splash screen. Odin 3.09 gave the load a PASS, and I 100% had 6.0.1 on it before trying to root. Is there something I could be doing horribly wrong, I'm fairly new to Android rooting, though I have a lot of experience with iOS jailbreaking.
Click to expand...
Click to collapse
If you're trying to root, you have to be on Lollipop. Can't root MM, but it IS possible to get on a pre-rooted ROM.
Go back to Lollipop, and follow this: http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
Once you're on Lollipop and rooted, if you can get your bootloader unlocked, then you can upgrade to a pre-rooted 6.0.1 ROM.
Go here to see if you can unlock. (Some phones can, some can't. Cross your fingers!) Read the "Warnings" section carefully, and look to see if your cid # starts with 15.
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
If you can unlock, follow the instructions on that page carefully to do it, and then follow these instructions for going to 6.0.1 on unlocked bootloader:
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784
TUTRider said:
it was on 5.0 I believe, and now am using 3.09. Thanks for the info.
Anything else you would recommend?
Click to expand...
Click to collapse
Yes. We would need to know which 5.0/LP you were on. Such as 0A8, OC4, OD5, etc...as the person posted before me. You cannotODIN back to KK(4 4.2/4.4.4) if you were on OE1 and above...if you know exactly what version you were on, I'd suggest you grab that tar and odin. Best of luck bud and let us know the Version you were on before you attemptedto root.
Moved from the android dev section to general section as suggested by @malbert16442 This should not trip knox but Im guessing most people who are viewing this already have anyway . Simply Download on your PC, put your device into download mode (power off phone and hold volume down, home button and power button and let go when you see the download mode icon) and place the file in the AP slot in Odin.
LINK HERE: https://drive.google.com/open?id=0Bw2KkJbEyV5EOEo2SWMzQ21naUU
Rom Devs feel free to use this for Deodexing or anything without asking permission. Free to use for anything!
first
You're welcome.
Oh boy been waiting for this thank you very much
badapple420 said:
Oh boy been waiting for this thank you very much
Click to expand...
Click to collapse
No problem! Now I can help out with testing roms and revert back a lot easier and quicker if something goes wrong!
malbert16442 said:
first
Click to expand...
Click to collapse
Is this a rooted ROM?
Thanks.
Cooljb said:
Is this a rooted ROM?
Thanks.
Click to expand...
Click to collapse
No this is the official restore file. So unrooted.
chippinganimal said:
No this is the official restore file. So unrooted.
Click to expand...
Click to collapse
Got it. Thanks.
works, tested
It worked on my S5 but will not root using CF auto root. Mine locked up and had to re-flash.
Anyone root this yet and how?
[email protected] said:
It worked on my S5 but will not root using CF auto root. Mine locked up and had to re-flash.
Anyone root this yet and how?
Click to expand...
Click to collapse
For MM, you have to use a different method called systemless root. I did it a while ago and there is a written out tutorial over on the "sprint gs5 android 6.0" thread in this forum. Just use the search tool there and search "systemless root."
Decisions, decisions - - use this to 'upgrade stock' from my rooted stock deox and have phone totally reset ...or wait for deox stock MM PCA and see if it will take without reset ...
hmmm
Was all hot to upgrade the 2 yo phone , but nothing compelling..nothing faster with qi charging, radio, ir blaster , sd-card slot, water proof , and definetley nothing with removable battery. S7 is the closest and it is locked down ..so sad.
Kenny
chippinganimal said:
Moved from the android dev section to general section as suggested by @malbert16442 This should not trip knox but Im guessing most people who are viewing this already have anyway . Simply Download on your PC, put your device into download mode (power off phone and hold volume down, home button and power button and let go when you see the download mode icon) and place the file in the AP slot in Odin.
LINK HERE: https://drive.google.com/open?id=0Bw2KkJbEyV5EOEo2SWMzQ21naUU
Rom Devs feel free to use this for Deodexing or anything without asking permission. Free to use for anything!
Click to expand...
Click to collapse
This should be in the DEV section. If he told you to move it, it was probably because your original link didn't work.
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
hussmanne said:
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
Click to expand...
Click to collapse
It can take up to 20 minutes to boot, but usually takes around 10 min
hussmanne said:
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
Click to expand...
Click to collapse
I needed to wipe data, then it booted
Sent from my SM-G900P using XDA-Developers mobile app
maheboi said:
I needed to wipe data, then it booted
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
Wiping data did it! Thank you!
Has anyone tried flashing this using flashfire, injecting root, and flashing the stock partitions via Odin with success? Wile my phone is beyond the warranty period, I have not tripped knox yet and would like to keep it that way if possible. I was able to have completely stock rooted OK4 with this method.
Just to be clear -- will applying this tar via Odin do the full update of MM bootloader, kernel, modem (if applicable), etc etc?
nickmaps said:
Just to be clear -- will applying this tar via Odin do the full update of MM bootloader, kernel, modem (if applicable), etc etc?
Click to expand...
Click to collapse
Yup! So you will be able to flash custom roms like @malbert16442 s7 port without any issues (well when he releases V3 as he a group of people beta testing it right now and according to @philiptibbs who is among them V3 works fully with sprint. And on 2.5 everything works but sending sms (recieving sms and sending/recieving mms work fine though, not sure why thats the case.)
Well i rooted my device and the bugs were to much to deal with so i decided to unroot by flashing the stockedgeboot and now every time i boot my device it goes straight to recovery mode Can someone please help?
nyamd20 said:
Well i rooted my device and the bugs were to much to deal with so i decided to unroot by flashing the stockedgeboot and now every time i boot my device it goes straight to recovery mode Can someone please help?
Click to expand...
Click to collapse
odin to PG1 firmware
guaneet said:
odin to PG1 firmware
Click to expand...
Click to collapse
how exactly would i do that?
nyamd20 said:
how exactly would i do that?
Click to expand...
Click to collapse
Have you tried just selecting reboot system now.
nyamd20 said:
how exactly would i do that?
Click to expand...
Click to collapse
If you have to ask this question. Then you should of never rooted you phone. These are Basic things you should be able to do. Before you root.
nyamd20 said:
how exactly would i do that?
Click to expand...
Click to collapse
You need to download Odin, then download one of the recent firmwares like PD8 etc. Put your phone in download mode, hook it to your computer, open Odin, click AP then pick the firmware file you downloaded and hit start.
You should have Odin from when you rooted and you can find the firmware file on the forum here. Just search for PD8 or PG1.
You soft bricked your device. no big deal Samsung makes it fairly easy to fix. Download Smart Switch to your computer and use the Emergency Software Recovery/ initialization process to recover your device. You will have to re initialize your device and you will lose everything on your internal storage but your phone will be fine.
Again the root method discovered uses an ENG boot and is not meant for every day use it is not true root and will always cause more issues than it is worth.
So, I found the OTA update packages for the FRD-L14 to B320 (and B317)
I really wanted to update... but I'm not sure how.
I'm rooted, with TWRP and SuperSU installed, and it all works ok.
I didn't want to do any hard methods, scared of bricking it. Updating the OTA over SD card isn't working (can't even find the setting)
So what to do?
They are only OTA updates, not Full, so I can't just use dload method to load them up.
I would prefer to keep root, but if I have to reflash to stock, and then re-root, I can do that.
Any other methods I can use? Can anyone with a bit more knowledge help me out?
And of course, more than happy to share the OTA files, one is approximately 3gb (B317) and the other is about 300mb (B320)
Thanks
Unroot phone and flash stock recovery
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
SolarisSixth said:
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
Click to expand...
Click to collapse
what is you full model no ?
FRD-L14C???B???
chongns said:
what is you full model no ?
FRD-L14C???B???
Click to expand...
Click to collapse
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
SolarisSixth said:
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
Click to expand...
Click to collapse
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
chongns said:
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
Click to expand...
Click to collapse
I was pretty sure it was the right one, at least it seemed to be. Thanks for the hw_usa.zip file, could you point me towards the correct update.zip?
I flashed the one I had with twrp, but it seemed to fail, and caused a brick. So I wouldn't want to flash the same version, especially since it seemed to not work.
SolarisSixth said:
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
Click to expand...
Click to collapse
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
fuyucn said:
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
Click to expand...
Click to collapse
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
SolarisSixth said:
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
Click to expand...
Click to collapse
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
fuyucn said:
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
Click to expand...
Click to collapse
Ahh, that makes perfect sense. Thank you.
I had tried to update it via twrp before, and when that failed, just tried dload method, and neither one worked. I didn't have the hw_usa file.
I appreciate the help, and just running a backup before I go ahead and flash.
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
dmband64 said:
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
Click to expand...
Click to collapse
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
SolarisSixth said:
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
Click to expand...
Click to collapse
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
Click to expand...
Click to collapse
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
Click to expand...
Click to collapse
Hmm, it seems to have worked for me, but I seem to be running into some issues. It might have failed for me too.
I HAVE to replace some of these default apps. Some of them are truly awful, not to mention I have to uninstall some.
dmband64 said:
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
Click to expand...
Click to collapse
thanks, i will try it.
Which TWRP you used for the FRD-L14
Having searched with no luck so far, has anyone got a working root for the SM-J530F yet?
Thanks in advance.
Deadite said:
Having searched with no luck so far, has anyone got a working root for the SM-J530F yet?
Thanks in advance.
Click to expand...
Click to collapse
This device is very new, so you should wait for people to start work on it. If you have any knowledge, start by making a custom recovery or similar
Haxomen said:
This device is very new, so you should wait for people to start work on it. If you have any knowledge, start by making a custom recovery or similar
Click to expand...
Click to collapse
it's happening finally! embrace yourselves
I am just trying to compile twrp for the J530f. Any help is appreciated aß groß is the first Recovery I am trying to build. Gathering Information about the boardconfig.md or where to get a proper binary. I am usimg the one from samsung openSource - http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=J530f - atm. However the version number is not exactly the same as my device's.
My Current config contains true for the values I already have looked up and informatio where I have found them.
I now have verified all uncommented flags.
Commented Flags still not verified.
Added TWRP Flags from https://forum.xda-developers.com/showthread.php?t=1943625
Edit: Updated BoardConfig.mk
Deadite said:
Having searched with no luck so far, has anyone got a working root for the SM-J530F yet?
Thanks in advance.
Click to expand...
Click to collapse
+1
Created a recovery.fstab. Should be correct . Could not find the usb block.
i'm going to trying this
https://www.halabtech.com/root-j530f-7-0/
edit: odin binary error. someone can correct it?
edit2: ROOT OK!!! just rename the file from md5 to tar. but there's a little problem: is necessary to wipe data before made it. after the root, softwares update don't work.
wetito said:
i'm going to trying this
https://www.halabtech.com/root-j530f-7-0/
edit: odin binary error. someone can correct it?
edit2: ROOT OK!!! just rename the file from md5 to tar. but there's a little problem: is necessary to wipe data before made it. after the root, softwares update don't work.
Click to expand...
Click to collapse
Was The root successful? Works the root with no Problems?
The root works. The correct procedure is: wipe data from recovery. Don't boot the Phone and go directly into download mode. Root the phone
roy_29_11 said:
Was The root successful? Works the root with no Problems?
Click to expand...
Click to collapse
wetito said:
The root works. The correct procedure is: wipe data from recovery. Don't boot the Phone and go directly into download mode. Root the phone
Click to expand...
Click to collapse
can u guys reupload that root file?
I cant download, i was register but when i try to activating my account, link always xpred
wetito said:
The root works. The correct procedure is: wipe data from recovery. Don't boot the Phone and go directly into download mode. Root the phone
Click to expand...
Click to collapse
Thanks Works fine ?
wetito said:
The root works. The correct procedure is: wipe data from recovery. Don't boot the Phone and go directly into download mode. Root the phone
Click to expand...
Click to collapse
Thanks, works for me also ?
Whitout bloatware the phone is much faster ?
wetito said:
The root works. The correct procedure is: wipe data from recovery. Don't boot the Phone and go directly into download mode. Root the phone
Click to expand...
Click to collapse
Works! Many Thanks.
I just have a question, will the custom ROMs for the older models work on this model?
wetito said:
Whitout bloatware the phone is much faster ?
Click to expand...
Click to collapse
What did you delete?
Can you tell me the apps ?
---------- Post added 4th August 2017 at 12:00 AM ---------- Previous post was 3rd August 2017 at 11:59 PM ----------
Gives a custom recovery for this Phone
dont work
dont work
akaluptos21 said:
dont work
Click to expand...
Click to collapse
Rename md5 to tar
Jay_.1234 said:
I just have a question, will the custom ROMs for the older models work on this model?
Click to expand...
Click to collapse
Nope.
seblefb said:
can u guys reupload that root file?
I cant download, i was register but when i try to activating my account, link always xpred
Click to expand...
Click to collapse
https://www.magentacloud.de/share/ua13erv801
hope it works