Related
[SOLVED]
I rooted this, installed clockworkmod, then went and got an cm7 dated april something 2012 u8160 rom from psyke83 website.
installed it through clockworkmod install from sd card option with success (also clicked option to backup everything).
yet when phone reboots it hangs on the blue arrow in a circle spinning around, sometimes reboots n repeats but it never goes past that.
I have tried going into recovery mode holding down volume buttons and power
and I get 1 of 2 errors:
with sd card in:
firmware update
step 1/2
unpacking
update failed
with sd card out:
purple screen.
I am a first time android modder, can someone please, please tell me how to fix this. I can access the sd card with a reader if need be to put whatever files on it that I should.
Thank you.
Start the phone by pressing volume up + power OR volume down + power. You should be able to boot to recovery with one of those combinations (other one boots to fastboot most probably). After that do the wipe data/cache and try to reboot once again.
What was wrong in the beginning was that you did not wipe data/cache. That made the CM use old OS's data files which obviously won't work.
The unpacking thing was caused by pressing volume up + volume down + power. That causes the phone to go to upgrade mode if there is an update package found.
Nope. still goes to the blue arrow circling then freezes then reboots....
mrw187 said:
Nope. still goes to the blue arrow circling then freezes then reboots....
Click to expand...
Click to collapse
You are right about me not wiping the data/cache though...
But in your phone forum, are there tutorials on how to boot to recovery? Do you have any other hard keys on the phone?
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
mrw187 said:
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
Click to expand...
Click to collapse
Hmm, would this work?
yay!!
it was volume up + power + cancel button (? maybe home button? not sure on what this button is but its the biggest).
wiped all data n cache n then it booted properly.
So the problem is solved? If you can, mark first post title with [SOLVED].
Sent from my U8800 using Tapatalk 2
huaweiU8180 freeze on boot to recovery
I have tried all the solution but failed the problem is my HuaweiU8180 keeps on hanging wen I try booting to recovery mode now I can't format my phone and I can't install a custom ROM even when the phone is rooted and I hav ROM manager premium installed and I flashed CWM but still someone help me please
Hi there xda community,
I did switched from Retail EU to this custom ROM:
http://forum.xda-developers.com/showthread.php?t=2174731 using Version RazRi_JB_X-2013-Dec-01.zip.
I did this somewhere around beginning of December. My first appreciation settled fast, since a lot of apps crashed right away (Cisco VPN, mpass), others did after a short run (Teamviewer), some did crash the whole phone and made it reboot (Sony TrackID) , VPN connections could not be established,
Anyway, using TWRP today I tried to test the new release RazRi_JB_X-2014-Jan-28; after tons of minutes waiting I rebooted the phone and tried again. Nothing. Tried to use the last RazRi_JB_X-2013-Dec-01. Since all failed I just wanted to use my Backup that I made before installing the ROM.
And now the phone starts up showing the "WARNING BOOTLOADER UNLOCKED" screen.
My windows 7 pc shows "Android" under devices, I can remove "Android" with the icon in the taskbar, BUT:
adb devices does not recognize the phone.
So I guess I'm done, phone bricked.
I did check some posts and forums but nothing did help me.
So any sort of hints on how to proceed would be much appreciated.
Thanks,
James
That warning message appears when you unlock the bootloader, and can't hide if u are in JB. After restore that nandroid the phone can't load?
Enviado desde mi XT890 usando Tapatalk
Fede79 said:
That warning message appears when you unlock the bootloader, and can't hide if u are in JB. After restore that nandroid the phone can't load?
Enviado desde mi XT890 usando Tapatalk
Click to expand...
Click to collapse
I know that, thanks.
How do you suppose I restore ?
Have a custom recovery installed? I supposed yes if u flash a zip file. Dunno how to do it in TWRP, I'm reading now and that recovery have a nandroid menu.
Just reboot the phone in recovery and search for that menu, this in case if that nandroid was do it with TWRP.
Enviado desde mi XT890 usando Tapatalk
Fede79 said:
Have a custom recovery installed? I supposed yes if u flash a zip file. Dunno how to do it in TWRP, I'm reading now and that recovery have a nandroid menu.
Just reboot the phone in recovery and search for that menu, this in case if that nandroid was do it with TWRP.
Enviado desde mi XT890 usando Tapatalk
Click to expand...
Click to collapse
Hi there,
I think you did not understand my problem.
If I could boot into recovery I would do so. But I cannot, all I see is the "Warning Bootloader Unlocked" Screen, and that is all. Sometimes the phone goes off and starts to boot to that screen. Nothing more.
When trying to use VOL UP / DOWN + PWR Button combinations, none seem to work.
Andro1dism said:
When trying to use VOL UP / DOWN + PWR Button combinations, none seem to work.
Click to expand...
Click to collapse
Try holding PWR, VOL+, VOL- for more than 10sec until it reboots.
If its reboot and you see the green LED release all buttons except VOL-.
Hold VOL- until recovery starts. Than load your nandroid backup.
Maybe your new JB-Rom replaced your TWRP and failed. Than you need to install your old-rom TWRP to recover nandroid.
If all fails try to install Stock JB 4.1.2 via RSD-Light and than install the old-rom TWRP and recover nandroid.
5m00v3 said:
Try holding PWR, VOL+, VOL- for more than 10sec until it reboots.
If its reboot and you see the green LED release all buttons except VOL-.
Hold VOL- until recovery starts. Than load your nandroid backup.
Maybe your new JB-Rom replaced your TWRP and failed. Than you need to install your old-rom TWRP to recover nandroid.
If all fails try to install Stock JB 4.1.2 via RSD-Light and than install the old-rom TWRP and recover nandroid.
Click to expand...
Click to collapse
NIIICE! Works! YOU THE MAN! :highfive::highfive:
Thanks a lot mate! You made my day!
So many different sites and none of their instructions helped!
Thx again! :good:
This instruction is given here several times. There are a lot of threads titled like yours....
ICuaI said:
This instruction is given here several times. There are a lot of threads titled like yours....
Click to expand...
Click to collapse
Thanks for your constructive post!
Although I did search the net and forum, I did not find a proper solution, thats why I asked here. Probably should have mentioned that in the first post to satisfy the need for approval of the question.
Yours Sincerely,
James
Andro1dism said:
Thanks for your constructive post!
Although I did search the net and forum, I did not find a proper solution, thats why I asked here. Probably should have mentioned that in the first post to satisfy the need for approval of the question.
Yours Sincerely,
James
Click to expand...
Click to collapse
Ok, when I have a look in the right section (http://forum.xda-developers.com/razr-i/help)
There are:
cannot enter bootloader with how to (Date 2014-02-14)
weird softbrick with how to (date 2014-2-10)
These are only 2 I found in less than one minute.
So please excuse my post, but if the same question is asked again and again and the answer is given several times, it is really annoying to read those questions again and again.
If you had searched I am sure you would have found the answer
ICuaI said:
If you had searched I am sure you would have found the answer
Click to expand...
Click to collapse
Well, I too think that the bootloader-entering-combination for the updated 4.1.2 build is not well documented as I searched multiple minutes for it when I needed it
The key is: Power the phone on with Power + Volume Down, release the power button instantaneously as the phone vibrates and hold volume down until the bootloader is there.
This also works on any reboot: Just press and hold the volume down button shortly before the device starts to vibrate (see the green light) - no need to press the power button there.
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx
Can y get to fastboot ?
im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.
Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme
Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail
errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.
Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)
rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.
keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....
how to stop boot loop ??????
can you provide videos how to stop boot loop ??????
I was using CM 13, and flashed "twrp-0.8.9.5-d802-bump-blastagator-signed.zip" over 2.8.7.3 for my LG G2 D802, then I rebooted into recovery, got new theme and all those stuff as 0.8.9.5 should have. Everything was OK, but right after flashed "bootstack-d802-LP_30d-Bump-signed" for install Cloudy G3 3.3, my phone turns off, so i decided to enter in recovery mode again. Got this: "Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel". So I pressed power button and this message came "Are you sure you want to continue with erase? Press Power key to confirm, and any other key to cancel". Pressed power again and "Facory reset processing..." message appears for a second, then my screen turned black (not off, just black). Now i can't boot into recovery, just download mode, but can't install firmware via kdz because flash tool stuck at 2%. What should I do to fix this? Please help!
PS: Sorry for my bad english.
Edit: When I try to enter in recovery mode (failing into that black screen) and connects phone to my pc through usb, pops up multiple windows asking to format all my "corrupted mobile partitions" (screenshot: i.imgur.com/gMX2f7u.png).
7Potters said:
I was using CM 13, and flashed "twrp-0.8.9.5-d802-bump-blastagator-signed.zip" over 2.8.7.3 for my LG G2 D802, then I rebooted into recovery, got new theme and all those stuff as 0.8.9.5 should have. Everything was OK, but right after flashed "bootstack-d802-LP_30d-Bump-signed" for install Cloudy G3 3.3, my phone turns off, so i decided to enter in recovery mode again. Got this: "Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel". So I pressed power button and this message came "Are you sure you want to continue with erase? Press Power key to confirm, and any other key to cancel". Pressed power again and "Facory reset processing..." message appears for a second, then my screen turned black (not off, just black). Now i can't boot into recovery, just download mode, but can't install firmware via kdz because flash tool stuck at 2%. What should I do to fix this? Please help!
PS: Sorry for my bad english.
Edit: When I try to enter in recovery mode (failing into that black screen) and connects phone to my pc through usb, pops up multiple windows asking to format all my "corrupted mobile partitions" (screenshot: i.imgur.com/gMX2f7u.png).
Click to expand...
Click to collapse
try SKRTOOLS click on my signature and go into tools sections .
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...
roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA
It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...
Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...
LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )