[SOLVED] [Q] Huawei U8180 First time Modder Problem - Huawei Ideos X5 U8800

[SOLVED]
I rooted this, installed clockworkmod, then went and got an cm7 dated april something 2012 u8160 rom from psyke83 website.
installed it through clockworkmod install from sd card option with success (also clicked option to backup everything).
yet when phone reboots it hangs on the blue arrow in a circle spinning around, sometimes reboots n repeats but it never goes past that.
I have tried going into recovery mode holding down volume buttons and power
and I get 1 of 2 errors:
with sd card in:
firmware update
step 1/2
unpacking
update failed
with sd card out:
purple screen.
I am a first time android modder, can someone please, please tell me how to fix this. I can access the sd card with a reader if need be to put whatever files on it that I should.
Thank you.

Start the phone by pressing volume up + power OR volume down + power. You should be able to boot to recovery with one of those combinations (other one boots to fastboot most probably). After that do the wipe data/cache and try to reboot once again.
What was wrong in the beginning was that you did not wipe data/cache. That made the CM use old OS's data files which obviously won't work.
The unpacking thing was caused by pressing volume up + volume down + power. That causes the phone to go to upgrade mode if there is an update package found.

Nope. still goes to the blue arrow circling then freezes then reboots....

mrw187 said:
Nope. still goes to the blue arrow circling then freezes then reboots....
Click to expand...
Click to collapse
You are right about me not wiping the data/cache though...

But in your phone forum, are there tutorials on how to boot to recovery? Do you have any other hard keys on the phone?

there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (

mrw187 said:
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
Click to expand...
Click to collapse
Hmm, would this work?

yay!!
it was volume up + power + cancel button (? maybe home button? not sure on what this button is but its the biggest).
wiped all data n cache n then it booted properly.

So the problem is solved? If you can, mark first post title with [SOLVED].
Sent from my U8800 using Tapatalk 2

huaweiU8180 freeze on boot to recovery
I have tried all the solution but failed the problem is my HuaweiU8180 keeps on hanging wen I try booting to recovery mode now I can't format my phone and I can't install a custom ROM even when the phone is rooted and I hav ROM manager premium installed and I flashed CWM but still someone help me please

Related

[Q] Stuck Android logo only

Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
subr4t4 said:
Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
Click to expand...
Click to collapse
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Probably not a good idea for him to answer that if it's the latter.
dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Thanks for reply
Trying to factory wipe by following some hard reset manual but none worked for me.
No, password i know still i can enter.
Trying to restore with Update or Full package.
Acer_A500_0.000.00_4.017.07_EMEA_CUS7_1311771237783_253e5e46.zip
Acer_A500_0.000.00_4.010.42_EMEA_GEN3_1311244577711_036d89ae New.zip
Tried with this 2 files, but none worked yet.
which file i ve to try from here ?
http://forum.xda-developers.com/showthread.php?t=1113878
??
anyone else ? i m still stuck
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
subr4t4 said:
Tried with this 2 files, but none worked yet.
Click to expand...
Click to collapse
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
ThatGeekGuy said:
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
Click to expand...
Click to collapse
Tried exactly same as u said, it shows "Erasing cach before sd update" then it brings recovery icon. nothing........
sc2k said:
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
Click to expand...
Click to collapse
Installation was 80% but not success........ stuck @ Recovery logo
anyone else with any other idea? m still stuck......
I have the same issues. I have tried installing new roms, and still get the same issues. Any ideas would be great

how to boot into CWR

hi, i have trouble booting into recovery. what i do is press "n" and power and it always goes to "Boot Menu" ... can someone tell me what that is and what it does ? ( i know i can boot into it by pressing power and selecting reboot and recovery just trying to find out how to from power-off) thanks.
I'm not the most knowledgeable one to answer this. I was waiting to see if someone else would post here.
But here goes. When I want boot into recovery when my nook is off, I power on holding down the n key. When the boot screen appears, I use the n key to toggle different options on the first line. I opt to boot from emmc. Then use the volume keys to move down to the next line and use the n key again to choose boot into recovery.
I don't remember the exact order of the lines, so I may be a little off, but I hope this helps get you booted into recovery from the boot screen
Sent from my NookColor using xda premium
Thanks for trying to help. i was experiencing boot-loop i think.. ( i wasn't even able to turn my NC off at all. it just kept booting up and being stuck on the Cyanogenmod loading screen every time when i turn it off by holding down power), thats why i needed to boot into recovery from power-off. how it happened was i upgraded to cm9. i wiped cache and dalvik and formatted boot, system and data before flashing. ( i know some instruction here tells to do a wipe data/factory reset. i didnt do that ) I fix it and went back to cm7 by putting in a bootable sd with CWR in the two seconds that it stays off... but the strange thing was that once again i did it my way (wipe cache/dalvik and format boot, system, data) and this time it worked~ no boot-loop. now i wonder what really caused boot-loop the first time even when i had the bootable sd card in it didn't even boot into recovery itself i had to push "n" like crazy ... to get in ...
k8108 said:
I'm not the most knowledgeable one to answer this. I was waiting to see if someone else would post here.
But here goes. When I want boot into recovery when my nook is off, I power on holding down the n key. When the boot screen appears, I use the n key to toggle different options on the first line. I opt to boot from emmc. Then use the volume keys to move down to the next line and use the n key again to choose boot into recovery.
I don't remember the exact order of the lines, so I may be a little off, but I hope this helps get you booted into recovery from the boot screen
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Glad you got it fixed.
Sent from my NookColor using xda premium
also if you have cwr on a bootable sd card you can use rom manager to flash cwr internally, so you wont need a bootable sd card, if you want to get into cwr just use rom manager and select reboot into recovery, i use to have cwr on my sd and didnt like it because you would have to take out the sd card everytime you boot, but this way is much easier, you can back up in rom manger instead of doing it the manual way...holding n and power button, hope this helps

Installed CM9 and now stuck on boot animation

Hi guys, i spent alot of time figuring out how to get CM9 on my phone and finally i got version 0.3.2 from http://www.jokersax.com/developer-pages/jokersax/cyanogenmod-9-atrix/ installed. After doing so in CWM i restarted my device and my phone gets stuck in the boot animation screen. Any Idea how to get out of here?
Flash again with no wipe. Should work.
Sent from my MB860 using xda premium
What do you mean no wipe?
Also I'm not sure how i can boot into CWM without clicking it from the app.
take battery out/in
restart phone, keeping volume down pressed in
keep on pressing volume down till you see android recovery
press volume up
wipe data
wipe cache
restart sytem and see if the phone boots up
if not repeat steps and install previolusly used? rom
Holding volume down just starts fastboot protocol for me. And hold up starts the RSD protocol.
EDIT: nvm i figured out how to get into recovery
Double EDIT: barry_ 's suggestion worked.

[Q] Error booting

Hi, yesterday I flashed my phone with Cyanogenmod and all was working perfect, I had installed the clockworkmod recovery and I rebooted the phone and now all the time appears the clockwordmod recovery, I removed the battery, try in download mode but nothing happens and in the recovery mode I can't select nothing because the home button does the function of the volume -, it's strange, hope u can help me, regards.
Anyone know how I can fix it? is urgent, thanks.
bump
lasley said:
Hi, yesterday I flashed my phone with Cyanogenmod and all was working perfect, I had installed the clockworkmod recovery and I rebooted the phone and now all the time appears the clockwordmod recovery, I removed the battery, try in download mode but nothing happens and in the recovery mode I can't select nothing because the home button does the function of the volume -, it's strange, hope u can help me, regards.
Click to expand...
Click to collapse
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
try solutions in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)

Zuk Z1 Soft Brick

Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx
Can y get to fastboot ?
im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.
Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme
Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail
errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.
Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)
rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.
keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....
how to stop boot loop ??????
can you provide videos how to stop boot loop ??????

Categories

Resources