hi, i have trouble booting into recovery. what i do is press "n" and power and it always goes to "Boot Menu" ... can someone tell me what that is and what it does ? ( i know i can boot into it by pressing power and selecting reboot and recovery just trying to find out how to from power-off) thanks.
I'm not the most knowledgeable one to answer this. I was waiting to see if someone else would post here.
But here goes. When I want boot into recovery when my nook is off, I power on holding down the n key. When the boot screen appears, I use the n key to toggle different options on the first line. I opt to boot from emmc. Then use the volume keys to move down to the next line and use the n key again to choose boot into recovery.
I don't remember the exact order of the lines, so I may be a little off, but I hope this helps get you booted into recovery from the boot screen
Sent from my NookColor using xda premium
Thanks for trying to help. i was experiencing boot-loop i think.. ( i wasn't even able to turn my NC off at all. it just kept booting up and being stuck on the Cyanogenmod loading screen every time when i turn it off by holding down power), thats why i needed to boot into recovery from power-off. how it happened was i upgraded to cm9. i wiped cache and dalvik and formatted boot, system and data before flashing. ( i know some instruction here tells to do a wipe data/factory reset. i didnt do that ) I fix it and went back to cm7 by putting in a bootable sd with CWR in the two seconds that it stays off... but the strange thing was that once again i did it my way (wipe cache/dalvik and format boot, system, data) and this time it worked~ no boot-loop. now i wonder what really caused boot-loop the first time even when i had the bootable sd card in it didn't even boot into recovery itself i had to push "n" like crazy ... to get in ...
k8108 said:
I'm not the most knowledgeable one to answer this. I was waiting to see if someone else would post here.
But here goes. When I want boot into recovery when my nook is off, I power on holding down the n key. When the boot screen appears, I use the n key to toggle different options on the first line. I opt to boot from emmc. Then use the volume keys to move down to the next line and use the n key again to choose boot into recovery.
I don't remember the exact order of the lines, so I may be a little off, but I hope this helps get you booted into recovery from the boot screen
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Glad you got it fixed.
Sent from my NookColor using xda premium
also if you have cwr on a bootable sd card you can use rom manager to flash cwr internally, so you wont need a bootable sd card, if you want to get into cwr just use rom manager and select reboot into recovery, i use to have cwr on my sd and didnt like it because you would have to take out the sd card everytime you boot, but this way is much easier, you can back up in rom manger instead of doing it the manual way...holding n and power button, hope this helps
Related
Using the verygreen instructions I have been running CM-7.0.3 encore signed off of SD for about 2 months now and want to try to update to the current nightly.
I put cm_encore_full-176.zip in the /boot directory of the SD and tried all of these without success:
1) Used the boot select u-boot.bin to boot from sd and recovery. It just hangs.
2) Used the boot select u-boot.bin to boot from sd and alternate. It just hangs.
I reverted to the standard u-boot.bin and did these without success:
1) Booted into CM7 then using the shut down menu rebooted into recovery. The update was not applied and boot was normal.
2) From power off, held down the power on and N buttons. After loading... appeared counted to 4 and released both buttons. No update applied and booted normall.
3) From power off, held down power on and N buttons. After loading... appeared, released power button, then pressed and held it for 5 seconds, waited for the screen to blank and let go of both buttons. No update applied and NC shut off.
Anyone know what I am doing wrong? I have been scouring all of the NC root sites and it seems everyone has a different hold buttons and release sequence. Is there a special /boot folder or something that can only be accessed while the sd card is in the NC where I have to copy the update zip file?
Imbroglio said:
1) Used the boot select u-boot.bin to boot from sd and recovery. It just hangs.
2) Used the boot select u-boot.bin to boot from sd and alternate. It just hangs.
Click to expand...
Click to collapse
Why you doing that?
Because there were recommendations to do to those steps on this site and others.
Do you have a solution to my problem?
You are going from a .29 kernel to a .32 kernel... From VG's SASD thread... first post... you need to update the version of the SASD.
How to update if you already installed using older version of the installer and don't want to reinstall (understandably):
•Get update zip from http://crimea.edu/~green/nook/update-genimage-1.3.zip
•Put the zip file as is onto the first partition of your sdcard..
•reboot into recovery (triggered by the keys, the reboot into recovery does not work yet).
•The new version would be installed and you are done.
•You can combine this installation together with updating to .32 kernel in one step. Just put the update-cm file and the update-genimage-1.3.zip to the first partition. Make sure there is still at least 1M of space left!
Click to expand...
Click to collapse
Imbroglio said:
Because there were recommendations to do to those steps on this site and others.
Do you have a solution to my problem?
Click to expand...
Click to collapse
Just put the new nightly build into the root folder and boot into recovery.
The only thing you need to do is your skill to boot into recovery, that's all.
The rest should be taken off.
DizzyDen said:
You are going from a .29 kernel to a .32 kernel... From VG's SASD thread... first post... you need to update the version of the SASD.
Click to expand...
Click to collapse
Ok copied the file onto /boot.
Tried a different button sequence:
http://www.youtube.com/watch?v=Kps9cWvyzqo
It still will not go into recovery mode. The thing is that I used the instructions on the video to help me install CM7 and gapps in the first place and it worked fine.
What exactly is the correct button sequence to get the NC to power on to recovery mode?
As you can see I found 3 different people saying to do it 3 different ways and none of them seem to work.
I am waiting for someone to say you have to wait until the 4th tuesday of the odd numbered month and hold down the buttons to the count of pi * the number of times Lindsay Lohan violates her probation in the past 4.5 months.
Do I need another program installed for this to work? Something like clockwork recovery mod (whatever that is)? Is there a difference that my NC doesn't say "Touch the Future of Reading" but just says "Loading..."?
It is making me pull my hair out and I didn't have that much hair left to begin with!
Just wanted to add an observation that after doing the button sequence in the video, "Loading.." the screen blanks for about .5 second and then is displayed again off center. The it goes into normal boot up.
Imbroglio said:
What exactly is the correct button sequence to get the NC to power on to recovery mode?
Click to expand...
Click to collapse
I've had to use the "rhythm method" for the first time in a while this week, setting up my dual boot on eMMC, and verygreen's instructions were the only thing that worked for me:
verygreen said:
hold nook N key and then press and hold power until the "Loading..." message appears and then disappears with screen going blank. Release power button, then press it again and hold for ~5 seconds, the bootloader "Loading..." message should be on the screen for three seconds or so before you release power button, keep holding N button until screen blanks again. If the screen went off while you were holding the power key, that means you were holding it for too long
Click to expand...
Click to collapse
This:
Imbroglio said:
Just wanted to add an observation that after doing the button sequence in the video, "Loading.." the screen blanks for about .5 second and then is displayed again off center.
Click to expand...
Click to collapse
is what should be happening--when the message comes back, press the power button again for five seconds, then release. Anamardoll's videos were made prior to the B&N 1.2 update, prior to CM7.1's existence, and prior to any of verygreen's SASD updates, so the behavior was a little different then.
Also, you may have successfully booted into recovery and installed the SASD 1.3 update file without realizing it--small packages can flash very quickly in verygreen's installer, and iirc, the "Loading" message you describe is expected behavior for SASD 1.3. If you look at the SD's boot partition in your PC and the .zip file is gone, it very likely installed. If that's the case, Power > Reboot > Recovery ought to be working now; copy over the CM7 update .zip, attempt the rhythm method again (may as well), and if you go straight through to CM7, try Power > Reboot > Recovery.
If none of the above works, you have very likely hosed your boot sector with some of the shenanigans in your OP, and may as well format the card and start from scratch with an up-to-date SASD image.
Imbroglio said:
Do I need another program installed for this to work? Something like clockwork recovery mod (whatever that is)?
Click to expand...
Click to collapse
CWM cannot help you with an SD install. If, however, you have chosen at any point to "Flash ClockworkMod Recovery" from ROM Manager, then you've already written CWM to your internal recovery partition, and might want to consider installing CM7 internally, as it would now be much easier than fixing your card (assuming none of the above got it done).
Thanks for the help all.
I am just going to redo the sd with the 177 nightly.
Hi guys, i spent alot of time figuring out how to get CM9 on my phone and finally i got version 0.3.2 from http://www.jokersax.com/developer-pages/jokersax/cyanogenmod-9-atrix/ installed. After doing so in CWM i restarted my device and my phone gets stuck in the boot animation screen. Any Idea how to get out of here?
Flash again with no wipe. Should work.
Sent from my MB860 using xda premium
What do you mean no wipe?
Also I'm not sure how i can boot into CWM without clicking it from the app.
take battery out/in
restart phone, keeping volume down pressed in
keep on pressing volume down till you see android recovery
press volume up
wipe data
wipe cache
restart sytem and see if the phone boots up
if not repeat steps and install previolusly used? rom
Holding volume down just starts fastboot protocol for me. And hold up starts the RSD protocol.
EDIT: nvm i figured out how to get into recovery
Double EDIT: barry_ 's suggestion worked.
[SOLVED]
I rooted this, installed clockworkmod, then went and got an cm7 dated april something 2012 u8160 rom from psyke83 website.
installed it through clockworkmod install from sd card option with success (also clicked option to backup everything).
yet when phone reboots it hangs on the blue arrow in a circle spinning around, sometimes reboots n repeats but it never goes past that.
I have tried going into recovery mode holding down volume buttons and power
and I get 1 of 2 errors:
with sd card in:
firmware update
step 1/2
unpacking
update failed
with sd card out:
purple screen.
I am a first time android modder, can someone please, please tell me how to fix this. I can access the sd card with a reader if need be to put whatever files on it that I should.
Thank you.
Start the phone by pressing volume up + power OR volume down + power. You should be able to boot to recovery with one of those combinations (other one boots to fastboot most probably). After that do the wipe data/cache and try to reboot once again.
What was wrong in the beginning was that you did not wipe data/cache. That made the CM use old OS's data files which obviously won't work.
The unpacking thing was caused by pressing volume up + volume down + power. That causes the phone to go to upgrade mode if there is an update package found.
Nope. still goes to the blue arrow circling then freezes then reboots....
mrw187 said:
Nope. still goes to the blue arrow circling then freezes then reboots....
Click to expand...
Click to collapse
You are right about me not wiping the data/cache though...
But in your phone forum, are there tutorials on how to boot to recovery? Do you have any other hard keys on the phone?
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
mrw187 said:
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
Click to expand...
Click to collapse
Hmm, would this work?
yay!!
it was volume up + power + cancel button (? maybe home button? not sure on what this button is but its the biggest).
wiped all data n cache n then it booted properly.
So the problem is solved? If you can, mark first post title with [SOLVED].
Sent from my U8800 using Tapatalk 2
huaweiU8180 freeze on boot to recovery
I have tried all the solution but failed the problem is my HuaweiU8180 keeps on hanging wen I try booting to recovery mode now I can't format my phone and I can't install a custom ROM even when the phone is rooted and I hav ROM manager premium installed and I flashed CWM but still someone help me please
Okay I'm starting to get a bit stressed out now. This is what I did.
1. I followed this thread to unlock the bootloader http://forum.xda-developers.com/showthread.php?t=1993331
2. Instead of SU onto the SD card I accidentally put it on the internal memory and I guess it must have been wiped so I couldn't find to flash in CWM
- CWM was showing an error at the bottom something to do with can't mount cache..log but I could still use it
- I didn't wipe dalvik cache or anything because I didnt flash anything
3. Now I'm stuck I can't seem to do anything, it goes to the Google sign with a padlock at the bottom then stays at the nexus logo
4. I'm trying to get into recovery but I cant get into bootloader, I press volup+voldown + power key and it vibrates then sort of turns off and nothing happens
Please help!!
letom said:
Okay I'm starting to get a bit stressed out now. This is what I did.
1. I followed this thread to unlock the bootloader http://forum.xda-developers.com/showthread.php?t=1993331
2. Instead of SU onto the SD card I accidentally put it on the internal memory and I guess it must have been wiped so I couldn't find to flash in CWM
- CWM was showing an error at the bottom something to do with can't mount cache..log but I could still use it
- I didn't wipe dalvik cache or anything because I didnt flash anything
3. Now I'm stuck I can't seem to do anything, it goes to the Google sign with a padlock at the bottom then stays at the nexus logo
4. I'm trying to get into recovery but I cant get into bootloader, I press volup+voldown + power key and it vibrates then sort of turns off and nothing happens
Please help!!
Click to expand...
Click to collapse
Its vol-d and power not up and down.
Sent from my Xoom using Tapatalk 2
Prod1702 said:
Its vol-d and power not up and down.
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
Thanks, really rookie mistake, I actually managed to get onto bootloader any randomly pressing things I guess that worked.
I have CM7 running on an SDcard in my Nook Color. I turned off the lockscreen slider and selected Menu button for unlock. Well, it doesn't work and now I cannot unlock my Nook. I have tried booting into recovery but it just runs a regular boot up, then it shuts down. When I boot up again, still no slider.
When I power on and hold the N button, I get a boot menu that give me the option of booting from the SD card into Recovery (uRecImg/uRecRam). That does the same thing as above. I never get any options to restore from a backup or anything. Am i supposed to get such an option?
Please tell me there's a way to get the screen unlocked without having to wipe my SD card and start over!
Thanks,
Tzuriel
tzuriel said:
I have CM7 running on an SDcard in my Nook Color. I turned off the lockscreen slider and selected Menu button for unlock. Well, it doesn't work and now I cannot unlock my Nook. I have tried booting into recovery but it just runs a regular boot up, then it shuts down. When I boot up again, still no slider.
When I power on and hold the N button, I get a boot menu that give me the option of booting from the SD card into Recovery (uRecImg/uRecRam). That does the same thing as above. I never get any options to restore from a backup or anything. Am i supposed to get such an option?
Please tell me there's a way to get the screen unlocked without having to wipe my SD card and start over!
Thanks,
Tzuriel
Click to expand...
Click to collapse
The SD card install does not have an ordinary recovery. It just has the script installer which is what you see scrolling by when you select recovery. But you can install a special alternate CWM recovery so you can wipe data and get rid of the lock problem. Go to my tips thread linked in my signature and look at item B5.
Sent from my NookColor running CM10 on SD using Tapatalk.
leapinlar said:
The SD card install does not have an ordinary recovery. It just has the script installer which is what you see scrolling by when you select recovery. But you can install a special alternate CWM recovery so you can wipe data and get rid of the lock problem. Go to my tips thread linked in my signature and look at item B5.
Sent from my NookColor running CM10 on SD using Tapatalk.
Click to expand...
Click to collapse
Thanks. When I got home, I just had to connect via USB and the screen unlocked. Now I've disabled that pesky bugger!