Hey guys.
I have zenfone 5 and maybe 6 months later i bought a flip cover.
I just flashed CM 12.1 and the problem is that this cover works only with ZenUI (when i open the cover, it turns on the screen and when i close the cover, it turns off the screen)
Any suggestions how to make it work?
I like CM UI so far and i don't want get back that boring ZenUI.
It does not work with CM, although you could try some app to do that, but I believe that there isn't any that works with Zenfone cover.
Install xposed and install proximity sensor app that will b found in xposed installer I hope it will work because u r using CM 12.1 same as me...
Related
Hey guys!
first of all I did a search in all sub-forums and honestly it didn't help. so I'm asking here
I tried to find an original quickwindow cover in my city, but no success. so I went for a replica
It's working fine, but has a really annoying problem. when I flip the cover and fold it to the back of the phone (which is kinda necessary to use it with one hand). this leads to quickwindow widgets enabled and screen become useless.
I'm using Cloudyflex rom. I need to know if this is normal? or it's because of higher than standard magnet in this fake cover that make the sensor activated even from back! or perhaps rom related (which I doubted, based on my search)
thanks in advance
pooyab said:
Hey guys!
first of all I did a search in all sub-forums and honestly it didn't help. so I'm asking here
I tried to find an original quickwindow cover in my city, but no success. so I went for a replica
It's working fine, but has a really annoying problem. when I flip the cover and fold it to the back of the phone (which is kinda necessary to use it with one hand). this leads to quickwindow widgets enabled and screen become useless.
I'm using Cloudyflex rom. I need to know if this is normal? or it's because of higher than standard magnet in this fake cover that make the sensor activated even from back! or perhaps rom related (which I doubted, based on my search)
thanks in advance
Click to expand...
Click to collapse
Hey,
I think is your case,
it's work perfect with Cloudyflex or CloudyPro !
Hello again
So i got a i9505 s4 dirt cheap (20euros), the screen was broken, last owner said it stopped working when he tried installing cyanogenmod.
I ordered new screen(original), installed stock rom and it got stuck in sview, i tried everything and nothing worked.
Next i tried rom called aosb (i don't remember if its the correct name, similar to cyanogenmod) it got me to home screen, for 15sec it worked great but then screen went black, phone was still going but everytime i tried to unlock it went black again.
Next i took phone apart, maybe i missed something or frogot to connect, but everything looked good. I googeled for possible problems and found that the proximity sensor(next to the top speaker) maybe broken, disconnected it and still same result. For testing purpose i disconnected front camera and phone worked, but only for 20min when the android tried to update gapps and then i was stuck at not able to unlock again.
Took phone apart third time, cleaned all the contacts etc, installed cyanogenmod and it works, but without front camera.
So my questions are
1. Has anyone ever seen anything like this?
2. Is there a way to use back camera without front one being connected? i can live without front camera
3. Why it goes to sview with stock rom?
Sorry for my english.
I hope somebody can help me.
Sir Tox said:
So my questions are
1. Has anyone ever seen anything like this?
2. Is there a way to use back camera without front one being connected? i can live without front camera
3. Why it goes to sview with stock rom?
Sorry for my english.
I hope somebody can help me.
Click to expand...
Click to collapse
Well try changing the ear piece module..its something in it maybe.. the proximity sensors are with the earpiece module..
1. Sview random appearances have been noted by many, there must be more to the mystery of this broken S4. A possible magnet sensor error..try disabling it via the xposed modules..anyhow.
2. Well you disconnect the font cam and everything works fine? Eh..never heard something like that..
3. Maybe because of a broken/weird magnetic sensor. As i said..
Plus are you sure without breaking rhe flex you removed and replaced and removed..
Your front cam not working could be because of a bad connection too..
Best is to try *#0*# in the phone menu and try testing the front cam and everything to check whether everything works fine
All the best
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
I buy sview cover case for my note 3 but i have problem
When i close cover show only status bar, other of screen is black. When some call me is showing normal in sview windows, when open cover work normal too . Problem is when is cover closed i dont see weather, missing call and other stuff.
Question is, its a software problem or case problem ? I buy from ebay for 5$.
What rom are you using?
This_Guyse said:
What rom are you using?
Click to expand...
Click to collapse
Stock rom 4.4.2
Hi. Feel free to move this thread if it's in the wrong section.
So here's the deal. I have a Note 3 with S-cover. And I love it. But I miss the LED-notifications. So I poked a hole in the cover, where the LED should be. But it seems the phone registers that I have a S-cover, and tries to save battery, by disabling LED when it is closed.
Is there any way to force the phone to display LED while the cover is closed?
Thank you.
Also, I'm on 4.4.2, Omega rom v23. I need to use a TW based rom in order for S-View to work properly.
I am flashing the unofficial releases (kltedv CM13) as they are published. I noticed my s-cover/smart cover function (switches screen on and off with open and close) that had been working up until the 2015-12-18 release is no longer working, or the function has been removed. Any information on this, or how to get it back?
Any update on this one? I'd fancy having the automatic screen on/off functionality back.
Edit:
Installed this to get the flip cover functionality: github. com/habeIchVergessen/HallMonitor
It appears to be somewhat hacky however and isn't exactly as responsive as I'd like it to be.
Well i have resolved this but... I have a nillkin app working with my sview cover, but it always after install asks the unlock key that was shipped with the card. (The card i have stolen from another nillkin sview case, and i'm a very bad guy). i can give the app, maybe some one can hack it. It works with CM13