Ok so I have two problems. Hopefully one of the geniuses here at xda might be able to help me
1st problem:
I was completely changing the harness / case for my herald and when everything was done all seemed fine, but... When I open my wing it does not rotate anymore, is there a switch or something that I forgot to align with the case once closing? Any help would be appreciated
2nd problem:
I'm using google maps through gprs(Data plan) and for some reason the gps finds me, but is like 200-2000 meters away from the location that I'm actually at. Is there a way to get it spot on? I know other phones have it dead on(For ex, my brother's iphone)
My phone: Herald 4351
Thank you!!!!!!!!
There is a little magnet that you must have forgotten to put into your new case. It's located on the bottom of the inside of the LCD compartment.
I did attach it, but what is the second piece that is supposed to slide by the magnet?
Hmm, i just recently replaced my wing with the black housing and all I did was put the magnet there and it worked, I don't know what else could be missing??
Hi there,
Maybe someone can explain me, where is the hermes's slide indicator (or.. I don't the correct term, sorry for my bad English). My friend gave me his phone, after he was trying to change phone's cover to original htc tytn cover (of course, top part of the case did not fit on that hermes, but bottom case fit's ok). And after he assembled all parts - phone did not recognize when you are sliding the keyboard, and the screen is not turning to landscape position.
And now I want to fix it for myself, ant had tried to search where is that indicator, which 'sees' when you slide the phone. And when I disassembled - I just cant identify that thing. Only one place in my inexperienced eye is suspicious - http://img65.imageshack.us/img65/8708/dscf7321.jpg this place, in other side of LCD, where the hinges(?) is placed. But I can't understand, how its working (I have other HTC TYTN, but it's under warranty, so I cant dissasembly it to try use other parts, o smth..).
So, I would be grateful if someone could lead me to the right road' to fix this problem... if it's possible.
Thanks,
Laimis.
Yes your friend forgot to move the screen orientation magnet from the old case to the new one!! New cases do not have the magnet attached you have to move it from the old case.
See here:
Yes and you forgot to move the screen orientation magnet from the old case to the new one!!
See here:
http://forum.xda-developers.com/show...01&postcount=6
.... so let's hope he didn't throw away the old case!!
Dismantling Guides for Hermes / TyTn here www.mikechannon.net
Mike
Thank you, Mike!
you were right there is no magnet on the new case, so now I will wait until my friend will send me an old case.
God luck!
... good luck to you
Hey guys, I have been so much frustrated about my htc topaz....till now it is working perfectly. Since yesterday all of a sudden touch screen stops working...with ballooning effect on screen ...previously ballooning effect was noticed before 3-4 days,but i did not pay attention on it as touch screen working at that time..
What may be the probable cause is it digitizer or lcd screen gone?
I have uploaded the pictures also..
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
I had the same problem, is very usual in this phone. the tecnical changed the screen.
luisitron said:
I had the same problem, is very usual in this phone. the tecnical changed the screen.
Click to expand...
Click to collapse
The problem is that my phone came from China... So I would have to send it there, and that's not an option...
rvrosa said:
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
Click to expand...
Click to collapse
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
Please explain that better? I only have to stick some scotch tape on the screen and peel it off?? I have a screen protector, so it's better to take it?
Thanks
indresh88 said:
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Click to expand...
Click to collapse
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
rvrosa said:
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
Click to expand...
Click to collapse
Well according to my research...If you have standard htc phone, you have device name t5353,no dual sim,htc written on left side and front camera on right side....
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
it helped me quite good and temporery, but how to fix it permanently...?
replace the touch screen digitizer.
eBay have many of them...
I have replaced my cracked one last month.
Two fixes for the scotch tape issue
1. Always take along some scotch tape or
2. Replace the digitizer. This can be done faily easily, see some other posts.
Cheers
I've looked at ebay for the digitizer and I've found many... the question is if they work on my phone?
I have a DUAL SIM T5388i, can anyone point me the right digitizer?
I've tried the tape but didn't worked I don't know if I'm doing it right because I've noticed no diference.
Help me!
I also have this problem, It just stopped working. I was calling, 10 minutes later when i took my phone and tried to unlock it, it did nothing, when i connect my phone in windows 7 with mobile center, I installed SOTI pocket controller, to check if it was my screen, and it was because via pocketcontroller it worked good, but how do i have to replace the screen thing, and how does it work with the tape,,
Thanks
i also had the same problem. if im not mistaken it might be due to humidity ...
i might be wrong
is there any way to fix this without replacing digitizer.
by the way i have a TD2 t5353 htc original .
Workign Solution Till Now
Hello Friends,
I have TD2 mobile and today I had same issue. I was thinking it was because of the weather or some.
I remember it did happend several time before, but when I restart the device several time it does work. So I was ignoring.... But today it did not work.. looks like going toward end... So I did soft and hard reset without and that did not helped me.
So I switched off the mobile, "heated" the touch screen gently with my hand for 1 min and started the mobile again and it worked for me .
Not sure if this is a solution, but will work.
May be I will contact Service Center here in Hyderbad and see what is wrong here?
Hope this will help you all...
Thanks.
Well, I've solved the problem... changed the digitizer...
rvrosa said:
Well, I've solved the problem... changed the digitizer...
Click to expand...
Click to collapse
How much that costs you?
prabhat said:
How much that costs you?
Click to expand...
Click to collapse
Take a look at solonomi. That's the place I've bought it.
digitizer for t5388i
Hi, I want to buy digitizer for t5388i, but I didn't find it. I searched at solonomi, ebay, alibaba... Have you any ideas where to buy? Digitizer for t5388i is not same with other t5388 models. Here is picture:
imageshack.us/photo/my-images/263/digitizer2.jpg/
(sorry for incomplete link, but I don't have permision to add images or links)
Many thanks.
Hi, just bought a cheap iconia a500 with a dent on one corner so obviously been dropped. It works fine however.
Only issue is one of the sensors seems faulty. I installed a custom rom and still same so not the rom at fault.
I only noticed it after installing words with friends. You can shake to shuffle tiles but mine just shuffles em continuously unless turned upside down. Not sure which sensor which sensor it is as rotate works fine.
I guess the drop caused it but is there a way of turning it off?
Anyone?
I can imagine it would have an impact on battery life also.
waj1234 said:
Hi, just bought a cheap iconia a500 with a dent on one corner so obviously been dropped. It works fine however.
Only issue is one of the sensors seems faulty. I installed a custom rom and still same so not the rom at fault.
I only noticed it after installing words with friends. You can shake to shuffle tiles but mine just shuffles em continuously unless turned upside down. Not sure which sensor which sensor it is as rotate works fine.
I guess the drop caused it but is there a way of turning it off?
Click to expand...
Click to collapse
Dude, you have posted this multiple times. You can't turn off the gyro. Sorry to say, you have to live with it, and forget about Words with Friends.
I posted it once before in the wrong section so posted it here. I would delete the other post if I had the option like other forums but alas I can't.
I can live with it actually especially at £40 and an answer to my question was all I wanted not an arsey comment dude.
No one told me it can't be switched off and I could find that answer nowhere after a long search of the forums, hence why I asked
Hey guys, I've been trying for a while now, and have only found dead ends.
I purchased a Spigen Slim Armor View for my new S5, not realizing that their functionality had been changed since the S4.
Having easily realized that all the 3rd party apps I can find for "fake" S-views are god-awful. I started looking for a solution to bypass the check for an S-view chip, and force S-view mode on bootup. My phone is rooted, and I do have xposed frameworks, but every mod I try just doesn't work. Does anyone have any solutions? I'd rather not have to settle for the awful apps, or have to buy an authentic case/chip to physically mod my case.
Any and all help would be greatly appreciated guys!
Tried a couple more scripts and kernels last night... Still no luck.
I'm hoping someone here has a solution!
Sort of in the same situation
I just bought the IC chip from aliexpress, 5$ for 2 and got a screen protector
After installing and inserting a small magnet from the headphones on the lower left of the spigen s-view case, the phone now recognizes this and forces the phone to show the s-view display
the only issue i have now is that the view in the spigen is smaller than the offical samsung s-view case, hence the camera and answering a call is cut off
is there anyway to mod the s-view window on the phone to make it smaller?