Hi There
My JasJar has been working pretty well, but yesterday I was using the machine in landscape mode (like a laptop as opposed to PDA mode) and noticed that I could easily rotate the screen either way.
I was sure that it was only supposed to turn one way (pushing on the bttom left), but couldn't resist the temptation to try as there was no resistance at all and I thought that maybe I had just missed this cool feature.
After I had rotated it the "other" way, I could not put it back in to landscape and had to turn it ANOTHER 180 degrees. I can feel the strain on the cables and am scared that it is going to break soon
Has anyone else had this please?
Thanks
John
It shouldn't do that. Both my JASJAR and my Exec will only rotate one way.
That's what I thought.
It seems as though the "rotation limiter" for want of a better phrase, is faulty.
Has anyone else had this, please?
Update....
I looked at the bottom part of the rotating joint and noticed a screw.
When I took this out, I was able to lift up the whole of the mechanism and saw that the cable was very tight. I rotated the screen back so that it was in the correct position again and then replaced the screw and it seems to be fine, BUT, I can still rotate it both ways, so I will need to be very careful.
I think that this machine is going back to i-mate!
JB
I unfortunatly had this probem out of the box with my o2 exec.
It survived 2 days before the screen went black.
was exchanged under o2's 28 day policy.
New one is much better better built
Guys, I hope you can help me!
I was using my Imate Jasjar when it was accidentally bumped by another person. the Jasjar fell but it wasn't that high and the floor was carpetted. However, I noticed that whenever i try to tap on the Start button on landscape mode, the calendar application opens up! And when I try to tap V-Bar on the other corner opposite the Start button, the Contacts application opens up. Basically, the soft keys on the bottom screen are the one opening up even if I'm tapping the ones on top! If I tap the bottom soft keys, I thought the Start button or my V-bar would come out but still the Calendar and Contacts applications were the ones that opened. Basically the everything on top cannot be tapped!
On Portrait mode, I can tap the start button but when the V-Bar was tapped it still opens the Contacts application.
I went to Settings then Screen to re-align the screen. I thought it would solve the problem but apparently it didn't! I was trapped in the Align Screen section giving me an endless loop to tap the 5 areas of the screen.
I now did a Hard Reset, and now I'm forever got stucked to the Align Screen part.
What am I supposed to do??? Please help!!!
Hi,
Seen the same problem... Try to guess the error margin of the alignment...
for example instead of tapping in the center of the cross try tapping on left or right... Since your screen isn't aligned you can't press on the center...
Now the problem is hardware, not the MB but the LCD...
After tou figure out the margin error, the Universal will resume and then you ca align the screen via Start->Settings->System, align screen
I'll try to know more about this problem asking my friend.
Best of luck
thanks for your reply!
i also believe that it has something to do with the LCD. there are no cracks whatsoever. problem with the aligning is i have to keep on guessing. and if ever i do align the screen successfully, i'm not sure if re-aligning the screen in Settings would solve the problem.
i would appreciate though if your friend or anybody else can shed light to a solution.
This is a simple problem to solve ;-)
When the allign screen is ON and you have to make the first tap on the crosshair (just before you start clicking away to allign your screen), twist your display from landscape to portrait mode...
Now continue to allign it as usual, and you should finish successfully!
Cheers,
San
unfortunately, after following your instructions, i still went on an endless loop on aligning the screen. i'll try to reflash the rom and see if it would work. i hope it does...
i updated my ROM. still stuck on the alignment screen!
any more ideas?
To be honest, sounds like your screen is broke. Even if you got it to align, I doubt it would be very usable. I think you are looking at repair - if there's no visible sign of damage, you might get away with a warranty repair.
Cheers,
Steve.
Hi
Few months back i've got exactly the same problems (odd LCD behavior, impossible alignment, etc...) with an HP4700. I went to the service center and they had to replace the LCD screen. They did not charge me and take it under warranty. In my case the unit did not drop and i made it clear to them. I would suggest you go back to the service center and forget about the drop in your problem description .
Cheers,
Bruno
I had the same thing happen on a HP 3700, I did not even drop it all i did was install the Quake game for it and after a few days the screen alignment went a bit out. It was usable but definately out by about 1 cm in each direction. The unit had not been dropped. I went into the allign screen utillity and ended up in the infinite loop. The only way to fix was a new screen. But unforunately it was no longer under warranty. The screen consists of 2 separate parts the lcd and the touch screen bit. In my case the lcd had no issues just the touch screen. Very annoying but there you go.
Search your soul and do what you feel comfortable with.
Good luck
Charlie
thanks for all your replies!
i've made several searches yesterday with similar problems (even if they're using different PPC models) and they all ended up sending back their units for repair. there's even one who posted in expansys with the same exact problem!
we'll be sending it back through expansys (we got the unit from them) and hopefully get it back before the end of the month. and yes, i won't tell them that it was dropped, he he :twisted: and they won't find evidence either on the outside because there are no physical damages. what a start of the new year for me <sigh>
right now i'm back using my XDA IIi.
thanks for all your support! this is my first thread/topic in this site and it's so unfortunate that it had to be sort of a negative one. looking forward to be active more here!
Hello there
This might help (I am currently wrking with 200 PDAs so have had this a few times)
THere may be a iece of dust/biscuit crumb etc, under the edge of the casing above the screen, try using a post it note or paper and go around the casing/edge of screen, this should clear the screen of anything that may be causing this problem.
THis worked for me on the majority of non-aligning screens
HTH
DB
My story was, one day when I needed to twist the screen, it was a bit stuck so I twisted a bit harder, yes it went back. Then few days later, the mis-alignment started and since then I have been keeping to do re-alignment my screen.
My screen is mis-aligned once every 2 or 3 days or even few minutes then I have to re-align by using WM5's alignment program. It sometimes takes me 2 or 3 times or even one time.
The most anoying thing is it keeps forget after aligned screen.
Now, certainty, I don't think it is a screen problem because after running alignment app, it correctly pointed into the right spot but then it forgot where the right position was.
I have done the upgraded ROM ( even tried Ivan AKU 3.2 ROM ) but problem still persisted.
I just tried clean up the edge of screen, finger cross, hope it fixes my problem.
Bad thing is, I bought my device from UK and I am living in Australia so therefore, my warranty is definately invalid. I don't want to spend 200 AUD for the new screen ( unless I am 100% sure that LCD is faulty ).
Anyone has any idea or even a better suggestion because I don't see many people having this problem.
I suspects that maybe the flex cable got ripped but not totally ripped. Don't know , please help me out on this one
Best regards
Anyone has any idea about my problem ??
One question :
I know that the flex cable has 2 connectors ( one is for LCD display and another is for LCD function ). Now does LCD function relate to the touch screen function ? and if one tiny wire of the function cable got cracked, but not totally cracked, will it affect the touch screen function ?
Other thing, does WM5 store any setting relating to screen alignment setting ? If yes, where is it ?
Thanks
Hi, from another forum, it only help to bypass the alignement loop:
"here you go theses are simple steps to bypass the touchscreen alignment.
Install you activesyn blah blah blah when it finds it go on my computer and go into your PDA device
go to windows startup and delete the Welcome file
after that give your PPC a soft reset and BAM u by passed the screen now get a free desktop program liek pocket controller from the internet it will automatically install on your pda and BAM you can control your pda add music and whatever
but now if you want to click stuff on the road get pen irazu just search on google and send it to your PDA then go to file explorer and double click it and you got a cute little mouse program that you can use like a stylus"
also try this little soft:
http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Hope it helps.
MaX
Hi godtakeit!
I've had the same problem a few weeks ago (and still having it from time to time) and for me a slight (very careful) bending of the screen makes it work again. It seems to me that there are connector behind or near the display which has some loose contacts.
Did you notice any other problems which came in conjuction with the alignment problem (e.g. speaker not working)?
.ox
Hi oxident
No, I don't have problem with speaker ( it was not working before but it is because of the jack plug problem - it solved ). Yeah, I did notice if I bend the screen carefully, the problem is gone. The funny thing is when I aligned the screen, it worked but if I closed it off and left it over night, it started again when I opened the lid.
You may right about the connector between LCD screen and mainboard. Well, I have no choice but openning the device and check it up.
Also, I read the thread somewhere in this forum and somebody advised this problem maybe relates to magnet around device. My brother aslo advised me that LCD charged and reserved negative electrons. Wierd but I am experiment it at the moment ( taking off battery and leave the device for a few days so that it can release the negative electrons ).
Hope it fixes
please help
i have an imate jas jam that i i got from my father he used it for like 3 years and it is pretty banged up so i cant use the warranty and repairs cost a lot, any who i got it yesterday and it was very slow so i reset the settings and now im stuck on the align screen it keeps going on for ever and ever if any one knows any thing plzzzz help
Welcome aboard
You have one of the best HTC devices ever made!
Have a look here to locate the solution to your prob:
http://forum.xda-developers.com/showthread.php?t=549207
Post number 2
Good luck,
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
stuart.myers said:
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
Click to expand...
Click to collapse
I guess you already tried hard reset?.
Can you get to bootloader mode?.
Tried hard resets, and getting to bootloader mode, i think this is a malfunction with the actual device, I just need to find out how to get in touch with o2 support internationally, i was wondering if someone on here may have had this problem too.
Thanks.
white screen - connector loose?
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
xda operation
tophamn said:
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
Click to expand...
Click to collapse
Hello there,
I had to get inside my xda to replace the screen that one of my dear rug rats broke. it is quite easy to do, and you only need to get into the screen side of it to get at the conectors. spin the screen half way round and look at the bottom and you will see 6 small screws. take out the two furthest out and two in the middle nearest the screen side. if you take them all out the whole thing becomes hard to handle. the front cover should GENTLY leaver off, and the cables to it exposed. even if they look in place lift the catch holding them in place and take them out and wipe the contacts with a cloth. just be very carefull with the cable strips as they tear very easy. . any problems then PM me
TTFN
Jay
White Screen
Try www.gpsmidlands.co.uk they replaced my ribbon assembly the same day.
Xda Lcd Repair
Try http://www.pda-repairs.co.uk
Brilliant
thanks for this posting - worked perfectly once i had worked out that atually you need to remove the screws further away from the screen in the middle. but otherwise I have successfully resurected a brick into a working universal! thanks!
Sark
Hi, peeps. Would like to ask for your assistance in troubleshooting my old T-Mobile MDA - the one that is also the Xda mini S.
The unit in question is 2nd hand although it was still in good shape when I got it. Used it for over a year already and has seen much use. Once, the insides got wet and I had to dry it out but it was okay after that. Although the keyboard wasn't showing any backlight until I figured out that a blowdryer would help remedy that situation (after careful dismantling).
Recently, the screen when you slide open the keyboard either comes up blank (whole screen is just white) or is discolored and a bit disaligned (the top part is either missing or is at the bottom of the screen). It happens too on the normal layout at times.
I upgraded the firmware with the most recent one I downloaded here last year. No problems experienced though with regards to the OS and not sure if the recent problem can be attributed to it.
Any ideas and suggestions?
I got the same problem on with the screen my Cingular 8125. When I slide the keyboard open, the exact same thing happens to my screen. Sometimes It only used to happen maybe once every 10th time, but as of last, it is happening all the time.
I spoke to someone at a repair store in Toronto and the guys said it will cost close to $100 to replace some wiring in the back. It didn't seem worth it for me so I got another phone instead, but I would love to keep using this phone if this could be replaced.
Hey guys. If you are comfortable, I would suggest dismantling the phone and taking a look at the ribbon connector between the board and the screen. My guess is that it is loose, or damaged. Reseat the ribbon and try again. Otherwise I would see if replacing the screen helped. Certainly much cheaper than a new phone...
Reseating
first of all check out the socket (on board) where the screen coaxial cord is plugged in , r all the connector pins alligned or are any bent / pulled back ?
in that case reset pins location using a tiny neidle or pin, also use a double faced adheisive tape on the back of the screen connector to rest it tight to keyboard (original setup only they use glue).
second check out if the screen does that if was flipped using software , if it was a hardware case and upper solution wouldnt help then check to see if the sliding mechanism (two plastic identical bars screwed by two screws each to the top and the buttom of the screen) are aligned and screwed tigh to the screen.
now the wizard hardware is a survivor but any tampering with it require tight reseating , screwing and later reflashing (even if the software showed unaffected).
Hi there,
Maybe someone can explain me, where is the hermes's slide indicator (or.. I don't the correct term, sorry for my bad English). My friend gave me his phone, after he was trying to change phone's cover to original htc tytn cover (of course, top part of the case did not fit on that hermes, but bottom case fit's ok). And after he assembled all parts - phone did not recognize when you are sliding the keyboard, and the screen is not turning to landscape position.
And now I want to fix it for myself, ant had tried to search where is that indicator, which 'sees' when you slide the phone. And when I disassembled - I just cant identify that thing. Only one place in my inexperienced eye is suspicious - http://img65.imageshack.us/img65/8708/dscf7321.jpg this place, in other side of LCD, where the hinges(?) is placed. But I can't understand, how its working (I have other HTC TYTN, but it's under warranty, so I cant dissasembly it to try use other parts, o smth..).
So, I would be grateful if someone could lead me to the right road' to fix this problem... if it's possible.
Thanks,
Laimis.
Yes your friend forgot to move the screen orientation magnet from the old case to the new one!! New cases do not have the magnet attached you have to move it from the old case.
See here:
Yes and you forgot to move the screen orientation magnet from the old case to the new one!!
See here:
http://forum.xda-developers.com/show...01&postcount=6
.... so let's hope he didn't throw away the old case!!
Dismantling Guides for Hermes / TyTn here www.mikechannon.net
Mike
Thank you, Mike!
you were right there is no magnet on the new case, so now I will wait until my friend will send me an old case.
God luck!
... good luck to you