Good afternoon,
my device doesn't boot up anymore and connected on the PC it is recognized as Care Suite Emergency Connectivity. There is a way to flash again the original factory firmware? It is dead...
sev7en said:
Good afternoon,
my device doesn't boot up anymore and connected on the PC it is recognized as Care Suite Emergency Connectivity. There is a way to flash again the original factory firmware? It is dead...
Click to expand...
Click to collapse
It looks like you don't have the right drivers installed. Apparently that Care Suite thing is related to a Nokia driver?
There is no firmware available to flash, KDZ nor TOT, though a LG Flash .dll does exist, and the device comes with LG's standard Download Mode, which seems to indicate a flashable firmware exists somewhere.
You can make use of the Download Mode exploit/backdoor, but I don't know how that would help much.
With the Fx0 you want to clear the LAF partition ASAP, so if something goes wrong you can access Fastboot mode.
You could try LG's Mobile Support Tool, which has a repair abilities that might help. That has saved me before on my G Pro. I don't know how well it would fare with the Fx0, but maybe it's your only hope short of JTAG?
Does recovery mode net any results? Download Mode work? Factory reset work?
culot said:
It looks like you don't have the right drivers installed. Apparently that Care Suite thing is related to a Nokia driver?
There is no firmware available to flash, KDZ nor TOT, though a LG Flash .dll does exist, and the device comes with LG's standard Download Mode, which seems to indicate a flashable firmware exists somewhere.
You can make use of the Download Mode exploit/backdoor, but I don't know how that would help much.
With the Fx0 you want to clear the LAF partition ASAP, so if something goes wrong you can access Fastboot mode.
You could try LG's Mobile Support Tool, which has a repair abilities that might help. That has saved me before on my G Pro. I don't know how well it would fare with the Fx0, but maybe it's your only hope short of JTAG?
Does recovery mode net any results? Download Mode work? Factory reset work?
Click to expand...
Click to collapse
Dear,
thanks for your reply, I tried the LG Mobile Support Tool but it is not able to recover the original firmware...
sev7en said:
Dear,
thanks for your reply, I tried the LG Mobile Support Tool but it is not able to recover the original firmware...
Click to expand...
Click to collapse
That makes sense, since LG has not made the original firmware available, it's not surprise that Mobile Support Tool would be useless. The Fx0 is JTAG-capable, so if you know someone with those skills that could maybe help.
Related
Hello everyone,
So I basically made a noob mistake. I had a custom recovery installed on my d802 and I opted to update the software via the LG apps. Now I am stuck at the LG logo on start-up. Normally this wouldn't bother me so much, but the problem is when I try to flash the original firmware with the flash tool. I have looked everywhere and haven't found a proper answer (forgive me if I missed a thread).
The problem is that I get an error saying your phone is disconnected when I'm pretty sure its not, and the phone screen displays "fastboot: processing commands". I have tried a different usb cable, a different pc with different version of windows. But unlucky so far.
Apart from this though, I was wondering if I could flash the Italy lollipop KDZ? I am in Germany and since I have the same model number (D802) I might as well give it a try. What are your thoughts?
Any help from you guys is highly appreciated.
alimzia said:
Hello everyone,
So I basically made a noob mistake. I had a custom recovery installed on my d802 and I opted to update the software via the LG apps. Now I am stuck at the LG logo on start-up. Normally this wouldn't bother me so much, but the problem is when I try to flash the original firmware with the flash tool. I have looked everywhere and haven't found a proper answer (forgive me if I missed a thread).
The problem is that I get an error saying your phone is disconnected when I'm pretty sure its not, and the phone screen displays "fastboot: processing commands". I have tried a different usb cable, a different pc with different version of windows. But unlucky so far.
Apart from this though, I was wondering if I could flash the Italy lollipop KDZ? I am in Germany and since I have the same model number (D802) I might as well give it a try. What are your thoughts?
Any help from you guys is highly appreciated.
Click to expand...
Click to collapse
Hi!
Yes, I'm pretty sure you can flash the Italy .kdz, 'cause it's correspond, basically, to the open version. I think there is some bloatwares, but they can be remove by root. you can even flash the spanish .kdz, but there is vodafone's bloatwares inside.
But if you're stuck in fastboot, I don't know if you can access to download mode. Can you describe actual state or your phone? Do you have access to recovery? Download Mode? Can you boot?
casual_kikoo said:
Hi!
Yes, I'm pretty sure you can flash the Italy .kdz, 'cause it's correspond, basically, to the open version. I think there is some bloatwares, but they can be remove by root. you can even flash the spanish .kdz, but there is vodafone's bloatwares inside.
But if you're stuck in fastboot, I don't know if you can access to download mode. Can you describe actual state or your phone? Do you have access to recovery? Download Mode? Can you boot?
Click to expand...
Click to collapse
Whenever I try to move into download mode it automatically takes me to fastboot. I cant access recovery or hard reset. But yes the lg logo does come up and thats all, it evens goes as far as the second time the logo comes up and the leds come on. But thats about it. It shows download mode for a little while and then automatically goes into fastboot.
Thats all I have right now.
Well this is not pretty. I just realised my phone isn't getting into download mode. I was under the impression that getting into fastboot when connecting phone to pc is the normal case for everyone. But im supposed to get into download mode rather than fastboot, eh?
Now i'm really out of clues. Appreciate your help devs!
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
qam47 said:
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
Click to expand...
Click to collapse
I got the same problem here after using MIUI and trying to get out of it.
Stuck in bootloop, no recovery, download mode stuck at first screen, phone not being detected by pc and no flashing led anymore.
Anyone help us please, my phone is out of warranty too
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Rayaxe said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Click to expand...
Click to collapse
Thanks for the reply.
But it says:
http://forum.xda-developers.com/showthread.php?t=2582142
VERY IMPORTANT!!!!!!!
You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone.
Click to expand...
Click to collapse
and i dont know which one to download.
Here is the link to Miui 6, I did install before crashing
http://forum.xda-developers.com/lg-g2/development/kk-miui-6-lg-g2-variants-based-stock-lg-t3106569.
...
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Rayaxe said:
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Click to expand...
Click to collapse
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
GoPogoOreo! said:
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
Click to expand...
Click to collapse
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Rayaxe said:
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Click to expand...
Click to collapse
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
GoPogoOreo! said:
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
Click to expand...
Click to collapse
samething with me please help
I recently got my hands on a bricked LG G2 D800 because i thought i was deemed unbrickable. I got the device the backlight showed life and that was about it. i managed to somehow get (this method i think) it to boot to the LG logo and than it jumps to fastboot mode.
Yea me!!! I got fastboot and this phone is as good as fixed. NO! fastboot does not work. It will absolutely not execute a command besides "fastboot devices" to which it brings up a fastboot device. Since i got fastboot my plan is to follow this thread to recover the device. i updated all drivers that i need for this device, nothing. Plain and simple, there is an issue getting fastboot to execute command. the commands appear on the device but it doesn't advance further.
Download mode. Yeah i get the download mode that I get is a "security error" so its not the traditional download mode. if i get download mode i can flash a .tot right? Wrong. Fails due to "model information check". i got the phone to appear under COM41. The .tot file is 'LGD800AT-01-V20c-310-410-FEB-02-2014+0.tot'. Drivers does not seem to be the issue at hand, unless maybe its the ADB/fastboot drivers which i also updated to newest version.
The next thing im contemplating if this method is worth the shot. I have it booting to fastboot. I will probably do this since its probably the only thing left to try. Going to set up linux now so i'll report back.
Any help/insight will be appeared and properly thanked for.
I also got security errors on an 802. I was about to leave the phone in download mode and ran the LG Mobile Support Tool to perform an upgrade recovery to get a stock LP ROM onto the phone.
audit13 said:
I also got security errors on an 802. I was about to leave the phone in download mode and ran the LG Mobile Support Tool to perform an upgrade recovery to get a stock LP ROM onto the phone.
Click to expand...
Click to collapse
Link(s)?
I just downloaded the LG Mobile tool from LG Canada. Just search for the d802 and download the program. The program should detect your phone and download the correct firmware.
http://www.lg.com/ca_en/support/software-manuals
I actually have the d802 and it worked with the LG mobile program from the Canadian website.
audit13 said:
I just downloaded the LG Mobile tool from LG Canada. Just search for the d802 and download the program. The program should detect your phone and download the correct firmware.
http://www.lg.com/ca_en/support/software-manuals
I actually have the d802 and it worked with the LG mobile program from the Canadian website.
Click to expand...
Click to collapse
worth a try i guess. thanks.
Good luck. I hope it works for you. Report back with your results.
audit13 said:
Good luck. I hope it works for you. Report back with your results.
Click to expand...
Click to collapse
No luck :/ wont detect phone. and i have proper drivers installed.
Are you using Win7?
audit13 said:
Are you using Win7?
Click to expand...
Click to collapse
nope windows 10
I restored my phone using Win7 and I think there are some LG programs that do not work properly with Win8/10. I think one tool is the flash tool.
Does anything appear in Win10's device manager when the phone is connected?
audit13 said:
I restored my phone using Win7 and I think there are some LG programs that do not work properly with Win8/10. I think one tool is the flash tool.
Does anything appear in Win10's device manager when the phone is connected?
Click to expand...
Click to collapse
more info here in my other thread http://forum.xda-developers.com/lg-g2/help/type-brick-t3198437 1st and 3rd post
hey there, while updating software with lg pc suite my g2 ended up in brick mode and only show the lg symbol.
i tried to install stock rom using this thread
http://forum.xda-developers.com/showthread.php?t=2432476
but, the computer does not recognize my phone, Probably becuase its on fastboot mode and not regular download mode,
i cant seem to find a way to fix it, any suggestions?
thanks!!!
or207 said:
hey there, while updating software with lg pc suite my g2 ended up in brick mode and only show the lg symbol.
i tried to install stock rom using this thread
http://forum.xda-developers.com/showthread.php?t=2432476
but, the computer does not recognize my phone, Probably becuase its on fastboot mode and not regular download mode,
i cant seem to find a way to fix it, any suggestions?
thanks!!!
Click to expand...
Click to collapse
Try this one, it worked for me, seems dangerous, but it seems like you have corrupted qhsusb
https://www.youtube.com/watch?v=E7zbs6of_4I
Whis will allow you to enter to download mode, then you can use the lg flash tool.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Try nuking download mode and then entering it. If it doesn't work, try the unbrick.
By the way, using capital letters doesn't hurt.
Hello,
My situation is very specific, but I try to explain as well as possible. My phone is a LG Magna H500f. I decided to try a H502f Custom ROM, because the hardware seemed to be the same. Wasn't a good idea. Closely as bad as the idea to flash the stock ROM of the H502f.
Now I got a soft bricked smartphone. I can boot only into the download mode, but the Smart Phone Flash Tool (SMFT) and some LG device flashers don't work either. There is one little exception. When the phone is turned off and I plug it into an USB port, it is in the download mode for about one second. This is enough for the SMFT to link in and flash. The main problem is, that there is just the stock ROM in the kdz format. That means you need a LG device flasher to flash it. But they don't work, even not in one second of download mode (I really tried it ). So what I need is the stock ROM in image format (boot.img, recovery.img, ...)
I crawled the entire internet with my private botnet, but I didn't found anything in three days.
I hope somebody can help, so I don't have to endure the consequences of my stupidy.
Greetings, Julian