Hello Devs,
I tried to root my phone and I accidentally bricked it.
So what I did was I tried to root my phone using Kingroot app which generally does the work for me. But this time it ended into a very complicated situation.
My phone is not starting up and it shows:
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
And it shows an error:
Error :Failed to pass validation. backup to fastboot.
Fastboot Reason: Fall-through from normal boot mode.
I tried Varizon Wireless Software Upgrade Assistant but it don't show my device. The real problem is my bootloader is locked and also the option "Allow OEM Unlocking" is not checked and I can't check it because the phone is not starting up. Now what can I do to make it work again?
the_harsh said:
Hello Devs,
I tried to root my phone and I accidentally bricked it.
So what I did was I tried to root my phone using Kingroot app which generally does the work for me. But this time it ended into a very complicated situation.
My phone is not starting up and it shows:
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
And it shows an error:
Error :Failed to pass validation. backup to fastboot.
Fastboot Reason: Fall-through from normal boot mode.
I tried Varizon Wireless Software Upgrade Assistant but it don't show my device. The real problem is my bootloader is locked and also the option "Allow OEM Unlocking" is not checked and I can't check it because the phone is not starting up. Now what can I do to make it work again?
Click to expand...
Click to collapse
Flash a factory image. Look in the general section. And use the one for your model/region.
GtrCraft said:
Flash a factory image. Look in the general section. And use the one for your model/region.
Click to expand...
Click to collapse
Flashing Factory Image don't require bootloader unlocked???
the_harsh said:
Flashing Factory Image don't require bootloader unlocked???
Click to expand...
Click to collapse
No
Sent from my XT1562 using XDA Labs
GtrCraft said:
Flash a factory image. Look in the general section. And use the one for your model/region.
Click to expand...
Click to collapse
Errr yeah, this question might be dumb but what is Factory image?
HerySean said:
Errr yeah, this question might be dumb but what is Factory image?
Click to expand...
Click to collapse
factory image means original firmware.
HerySean said:
Errr yeah, this question might be dumb but what is Factory image?
Click to expand...
Click to collapse
And you tried rooting.... You should know your fallbacks before messing with your device
bablu048 said:
factory image means original firmware.
Click to expand...
Click to collapse
Ooooooh yeah okay, I flashed the original firmware before, but i've never heard of that term before so, okay thanks for clearing that out for me.
If you don't have experience I recommend you to flash an original firmware with RSDLite. It's automatic and you have much less chances of doing some step wrong.
i need one solution, please :'(
vizardweek said:
i need one solution, please :'(
Click to expand...
Click to collapse
Flash the factory image using rsdlite
Automated reply by JARVIS
Have u slove this problem?? I am also having this problem from yesterday.plz anyone help me
bablu048 said:
factory image means original firmware.
Click to expand...
Click to collapse
GtrCraft said:
No
Sent from my XT1562 using XDA Labs
Click to expand...
Click to collapse
K.khiladi said:
Flash the factory image using rsdlite
Automated reply by JARVIS
Click to expand...
Click to collapse
I have tried to flash the factory image but still it gives error. The error it gives this time is:
Preflash Validation Failed.
I have tried to flash it through RSDLite but it could not recognise my device. What to do now??
the_harsh said:
I have tried to flash the factory image but still it gives error. The error it gives this time is:
Preflash Validation Failed.
I have tried to flash it through RSDLite but it could not recognise my device. What to do now??
Click to expand...
Click to collapse
you can repair the phone through RSD LITE...I guess you are using windows 10, RSD LITE doesn't work on windows 10, use windows 7, install usb drivers and RSD LITE then it will detect.
bablu048 said:
you can repair the phone through RSD LITE...I guess you are using windows 10, RSD LITE doesn't work on windows 10, use windows 7, install usb drivers and RSD LITE then it will detect.
Click to expand...
Click to collapse
I am using windows 8. Does it work on windows 8??? Also I have all the drivers properly installed. Because it was nowhere that you should use Win. 7 !
the_harsh said:
I am using windows 8. Does it work on windows 8??? Also I have all the drivers properly installed. Because it was nowhere that you should use Win. 7 !
Click to expand...
Click to collapse
for drivers it doesn't matter if it is win 7/8/9. but for RSD lite it matters i dont know if rsd works on windows 8, i am sure it doesn't work on win10 , i did it on my win 7.
bablu048 said:
for drivers it doesn't matter if it is win 7/8/9. but for RSD lite it matters i dont know if rsd works on windows 8, i am sure it doesn't work on win10 , i did it on my win 7.
Click to expand...
Click to collapse
ok...will try it with win 7
how to root moto x play ??
my phone stuck up while rooting.please help me out of these xda team ..
maheshh nandra said:
my phone stuck up while rooting.please help me out of these xda team ..
Click to expand...
Click to collapse
try su2.62-3
maheshh nandra said:
my phone stuck up while rooting.please help me out of these xda team ..
Click to expand...
Click to collapse
try using windroid toolkit. it will ease the things for you.
Related
guys i flashed to gb2.3.4. It went smooth. But due to the bugs i wanted to go back to 1.8.3. so i tried to flash back using 1.5.7(because i have this built full) but while flashing it failed. now if i want to go back to 2.3.4 again it wont start and writes modem start failed on startup red moto screen.please guys guide me.
amrutpritam said:
guys i flashed to gb2.3.4. It went smooth. But due to the bugs i wanted to go back to 1.8.3. so i tried to flash back using 1.5.7(because i have this built full) but while flashing it failed. now if i want to go back to 2.3.4 again it wont start and writes modem start failed on startup red moto screen.please guys guide me.
Click to expand...
Click to collapse
Did you unlock the bootloader again? Afaik, it relocks the bootloader once you do sbf flash.
Sent from rooted Atrix on 2.3.4 with unlocked bootloader using xda premium app.
I'm pretty sure the bootloader can't relock. Unlocking physically blows a fuse.
Sent from my MAtrix
amrutpritam said:
guys i flashed to gb2.3.4. It went smooth. But due to the bugs i wanted to go back to 1.8.3. so i tried to flash back using 1.5.7(because i have this built full) but while flashing it failed. now if i want to go back to 2.3.4 again it wont start and writes modem start failed on startup red moto screen.please guys guide me.
Click to expand...
Click to collapse
Download 1.87 and try to flash that.
JayRolla said:
Download 1.87 and try to flash that.
Click to expand...
Click to collapse
is there a new version 1.87?
is there any other link to download the full version of 1.8.3?The m3 superthread gives mega upload links and i am unable to download it from that site
thanks in advance
ceo.mtcl said:
Did you unlock the bootloader again? Afaik, it relocks the bootloader once you do sbf flash.
Click to expand...
Click to collapse
At this time you CANT RELOCK the bootloader. Flashing another SBF only removes the "Unlocked" at the top left. But the phone is still unlocked.
amrutpritam said:
is there any other link to download the full version of 1.8.3?The m3 superthread gives mega upload links and i am unable to download it from that site
thanks in advance
Click to expand...
Click to collapse
They have both megaupload and filesonic.
http://forum.xda-developers.com/showthread.php?t=1125944
oops i missed the filesonic link.recently i noticed my phone always fails to flash at the point where STARTING BP INTERFACE is written in rsd lite progress coloumn.after that if i try to start the phone it says modem failed to start(0) starting rsd lite protocol. Is it a hard brick? I had read in this forum somewhere that hard brick is possible after boot loader unlock. i like this phone very much. so worrying so much.
amrutpritam said:
oops i missed the filesonic link.recently i noticed my phone always fails to flash at the point where STARTING BP INTERFACE is written in rsd lite progress coloumn.after that if i try to start the phone it says modem failed to start(0) starting rsd lite protocol. Is it a hard brick? I had read in this forum somewhere that hard brick is possible after boot loader unlock. i like this phone very much. so worrying so much.
Click to expand...
Click to collapse
I would redownload the SBF. And try again. Try a new USB Cable. Try a diffirent USB Port. And leave the computer alone while it running.
donniesd said:
I would redownload the SBF. And try again. Try a new USB Cable. Try a diffirent USB Port. And leave the computer alone while it running.
Click to expand...
Click to collapse
Thanks i will definitely do that
Gitbrew has all the files you need.
Sent from my MB860 using XDA Premium App
no success
i redownloaded the firmware
used another usb cable
another usb port(this time the back of pc)
but it again failed in switching device to BP pass through mode.Pc actually searches for a driver for QHSUSB_DLOAD and doesnot find it. then fails to switch the device
i tried by formatting my computer and doing it again but without success.
please guys help me
Hi Friends.. Need some help... From last 3 days my device Back camera is not working.... Tried many camera apps but only front camera working.. Yesterday it showed the button to Switch to back camera, but when I clicked it, only blank screen use to come with a message (Media server died closing camera... Sometimes it used to say Can't connect to camera) tried force stop and clearing data... Didn't work.. From today morning it's not even showing the button to Switch to back camera... What to do??
Running Xenon HD rom.. Tried flashing AOSP EXTENDED ROM and restored my backup of 6.0.1 Resurrection Remix... It didn't help either... Plz need suggestions
flash factory firmware.
bablu048 said:
flash factory firmware.
Click to expand...
Click to collapse
Where can I find that for my xt1562? Can I do that with TWRP... I don't have a PC
syedafzal.shah said:
Where can I find that for my xt1562? Can I do that with TWRP... I don't have a PC
Click to expand...
Click to collapse
https://firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1562/
You need a PC for this.
bablu048 said:
https://firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1562/
You need a PC for this.
Click to expand...
Click to collapse
In that Link Indian Version has 0 Bytes size.....
syedafzal.shah said:
In that Link Indian Version has 0 Bytes size.....
Click to expand...
Click to collapse
Its 1.3gigs mpd24-107-70-1
"XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.xml.zip"
bablu048 said:
Its 1.3gigs mpd24-107-70-1
"XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.xml.zip"
Click to expand...
Click to collapse
One last thing... Is there any way to flash this without PC..? Iam running on a custom ROM and I have TWRP.... And If PC is the only way then How to Do that..? I checked few sites about flashing a firmware but they all are saying that to flash that we must type some codes and some of those codes will be different for every device....
syedafzal.shah said:
One last thing... Is there any way to flash this without PC..? Iam running on a custom ROM and I have TWRP.... And If PC is the only way then How to Do that..? I checked few sites about flashing a firmware but they all are saying that to flash that we must type some codes and some of those codes will be different for every device....
Click to expand...
Click to collapse
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
bablu048 said:
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
Click to expand...
Click to collapse
OK.. Will try after few days as I don't have PC now... Thanks
bablu048 said:
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
Click to expand...
Click to collapse
RSD Lite not detecting My device
syedafzal.shah said:
RSD Lite not detecting My device
Click to expand...
Click to collapse
it should enable developer-options and adb-debugging. and i think rsd lite doesn't work on windows 10, try it on windows 7 machine.
bablu048 said:
it should enable developer-options and adb-debugging. and i think rsd lite doesn't work on windows 10, try it on windows 7 machine.
Click to expand...
Click to collapse
OK... So last night I flashed the stock firmware... By typing all codes manually... Running stock Rom now.. But still back camera not working.. It's not even showing the button switch to back camera in camera app
Update : It wsas a hardware issue... went for repair.. It works now... Thanks
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
I couldn't make the youtube thinggy work lol but here's the link in case you guys wanna know what's going on with my piece of brick lol
https://www.youtube.com/watch?v=xX8_RgSS5x0
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
bkores said:
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
Click to expand...
Click to collapse
Thanks man i tried that one too no luck :C
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Yes man i tried it but i had no luck :C, thanks
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
J0nhy said:
Yes man i tried it but i had no luck :C, thanks
Click to expand...
Click to collapse
Use this driver
Restart - enter EDL again
Flash "B15-NEW_FULL (Nougat)" (the full one, not the twrp one)
lafester said:
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
Click to expand...
Click to collapse
Cannot turn off or on my device i cannot not do anything the only thing it does is a sound every time i plug it in to my pc
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
lafester said:
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
Click to expand...
Click to collapse
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Thanks. I kept getting partition type errors. The link you posted kept having network errors and dropping. It wasn't till after midnight pst that I got a stable connection and downloaded the whole thing. It flashed great and my phone is up and running. I was thinking I would have to send my phone in.
J0nhy said:
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
Click to expand...
Click to collapse
Yeah that's the kind of errors that suck /real/ bad. Good on you for not giving up. Now you know and you'll help spread the gospel of "keep trying until you can prove that it's actually an issue".
Hi, this is my first post on XDA. Excuse me if it isn´t very well made, Im writting this very quickly :c
I have an Axon7 (China version) and I flashed the U.S Version, however I lost my mobile network (ATT) signal and got a ¨No service¨text.
I flashed lineage OS to check if that would help me, flashed the universal bootloader and got it working, but I still had the no service error.
I decided to go back to stock nougat so I used Xiamiflash to try to flash the B19 firmware, it flashed succesfully but when I tried to turn it on I noticed my phone would get stock in Factory Test Mode, I flashed it succesfully but my phone wouln´t turn on, it gets stuck in a red Led and a black screen, i cant even get it to EDL mode :c
Please help.EDIT: I got my phone back on, I don´t know how, But I still have no service, I will create another Thread
Your PC see to device? BTW, don't flash us stock rom Via miflash tool. Just use twrp.
WesTD said:
Your PC see to device? BTW, don't flash us stock rom Via miflash tool. Just use twrp.
Click to expand...
Click to collapse
Yes, my pc now detects my phone in EDL, however I dont know wich package to flash , I can´t acces TWRP
Helacornio said:
Yes, my pc now detects my phone in EDL, however I dont know wich package to flash , I can´t acces TWRP
Click to expand...
Click to collapse
try this one
https://4pda.ru/forum/index.php?showtopic=814221&st=1080#entry62253492
WesTD said:
try this one
https://4pda.ru/forum/index.php?showtopic=814221&st=1080#entry62253492
Click to expand...
Click to collapse
Thank you for the help , It somehow restored but now I get a no service error :c I think it is because my EFS probably got corrupted :c
Helacornio said:
Thank you for the help , It somehow restored but now I get a no service error :c I think it is because my EFS probably got corrupted :c
Click to expand...
Click to collapse
There is no IMEI?
WesTD said:
There is no IMEI?
Click to expand...
Click to collapse
Exactly, I get a unkwnown imei error, however i still have my both imeis on my phone box, I dont know how to restore them
Helacornio said:
Exactly, I get a unkwnown imei error, however i still have my both imeis on my phone box, I dont know how to restore them
Click to expand...
Click to collapse
Do you have TWRP or can you?
WesTD said:
Do you have TWRP or can you?
Click to expand...
Click to collapse
I have TWRP Can I use it to restore my IMEI?
firstly try to flash B16 bootstack. check your imei. i don't anything else.
WesTD said:
firstly try to flash B16 bootstack. check your imei. i don't anything else.
Click to expand...
Click to collapse
it did not helped, I still get no signal :c
Helacornio said:
it did not helped, I still get no signal :c
Click to expand...
Click to collapse
Okay, try this guide
Follow it EXACTLY and you should get your IMEI back.
KwesiJnr said:
Okay, try this guide
Follow it EXACTLY and you should get your IMEI back.
Click to expand...
Click to collapse
TYSM But, how can i get the Qualcomm driver if I cant get it from Driver identifier :c.
Can you please send me the Qualcomm driver?
Helacornio said:
TYSM But, how can i get the Qualcomm driver if I cant get it from Driver identifier :c.
Can you please send me the Qualcomm driver?
Click to expand...
Click to collapse
Sure: https://www.androidfilehost.com/?fid=817550096634746189
All the best.
KwesiJnr said:
Sure: https://www.androidfilehost.com/?fid=817550096634746189
All the best.
Click to expand...
Click to collapse
I installed the drivers but my pc refuses to detect it :c
Helacornio said:
I installed the drivers but my pc refuses to detect it :c
Click to expand...
Click to collapse
You need to reboot your PC to Driver Enforcing mode if that happens.
Can you elaborate on what you mean by "refuses to detect it"?
KwesiJnr said:
You need to reboot your PC to Driver Enforcing mode if that happens.
Can you elaborate on what you mean by "refuses to detect it"?
Click to expand...
Click to collapse
It detects it but says that the device has no driver available.
It marks ZTE HSUSB Device but it says it has no driver installed
Helacornio said:
It detects it but says that the device has no driver available.
It marks ZTE HSUSB Device but it says it has no driver installed
Click to expand...
Click to collapse
OK, I got it to work, however , I cant get on my network :c
Helacornio said:
OK, I got it to work, however , I cant get on my network :c
Click to expand...
Click to collapse
Maybe it's time you tried a clean reset. The IMEI is unlikely to be wiped anymore...if you don't do anything drastic.
I would suggest you try MiFlash with the B19-NOUGAT_TWRP (Nougat 7.1.1) package from this thread, then flash the stock ROM afterward in TWRP.
Hi guys. I have TWRP installed on my phone and I want the latest Android update. If I download the whole package can I then just install the system and boot files via TWRP? Or is it something more I need to do and can I just keep my data?
chrb1985 said:
Hi guys. I have TWRP installed on my phone and I want the latest Android update. If I download the whole package can I then just install the system and boot files via TWRP? Or is it something more I need to do and can I just keep my data?
Click to expand...
Click to collapse
Use fastboot and follow section 9:
https://forum.xda-developers.com/showthread.php?t=3206928
Sent from my Nexus 5X using Tapatalk
Is it no way around fastboot?
chrb1985 said:
Is it no way around fastboot?
Click to expand...
Click to collapse
You can flash vendor, boot, and system images using TWRP then root again. However, bootloader and radio must be flashed either as a zip in TWRP or via fastboot. Bootloader and radio images cannot be flashed via the TWRP "image install." It is recommended that you flashed radio and bootloader through fastboot.
Sent from my Nexus 5X using Tapatalk
Okay thanks a lot. But my problem is that when I connect my USB cable the phone don't give me any options.. it just charges. That's why I want to try to start fresh again.. do you may have some tips?
chrb1985 said:
Okay thanks a lot. But my problem is that when I connect my USB cable the phone don't give me any options.. it just charges. That's why I want to try to start fresh again.. do you may have some tips?
Click to expand...
Click to collapse
Hey, click reply when you post. It gives the person helping you a notification that you've responded lol
If using windows, try to reinstall the Windows driver and minimal adb tools from the guide below:
https://forum.xda-developers.com/showthread.php?t=3206928
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Hey, click reply when you post. It gives the person helping you a notification that you've responded lol
If using windows, try to reinstall the Windows driver and minimal adb tools from the guide below:
https://forum.xda-developers.com/showthread.php?t=3206928
Click to expand...
Click to collapse
You see the problem is the I am not an administrator on any of the available PC's .. but it seems to be something wrong with the phone. Because when I connect it it does not happen anything. The only issue is that I can't transfer files from the phone to the computer, not even not, like mtp.. do you understand?
chrb1985 said:
You see the problem is the I am not an administrator on any of the available PC's .. but it seems to be something wrong with the phone. Because when I connect it it does not happen anything. The only issue is that I can't transfer files from the phone to the computer, not even not, like mtp.. do you understand?
Click to expand...
Click to collapse
If it's stock you like could always flash SuperXe . 8.1 versions are latest stock and 8.0 is built from stock source with latest security. All of which are flashable via twrp. On a side note pick yourself up cheap otg cable so you can backup your files on thumb drive. Makes it real easy if you have to completely wipe your phone. Especially if you don't have much access or having issues with computer.
Exodusche said:
If it's stock you like could always flash SuperXe . 8.1 versions are latest stock and 8.0 is built from stock source with latest security. All of which are flashable via twrp. On a side note pick yourself up cheap otg cable so you can backup your files on thumb drive. Makes it real easy if you have to completely wipe your phone. Especially if you don't have much access or having issues with computer.
Click to expand...
Click to collapse
Hi again. I have now tried a few different rooms and the problem persist.. but my computer connects to other phones. Just not the angler.. any thoughts?
chrb1985 said:
Hi again. I have now tried a few different rooms and the problem persist.. but my computer connects to other phones. Just not the angler.. any thoughts?
Click to expand...
Click to collapse
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Exodusche said:
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Click to expand...
Click to collapse
I will try it tomorrow
Exodusche said:
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Click to expand...
Click to collapse
Okey buddy! Thanx anyway