Database Users

Need help.. Bootloader Err:A5,70,70,00,1F

I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.

it works!! Thank you so much!!

anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.

THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!

Thank you sooooooo much!!!! I thought all hope was lost.

Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1

This worked to fix my phone, thx so much
i used the 2.3.20 SBF

will this work on the droid x?

myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps

Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App

Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again

Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App

Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results

well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.

Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.

I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.

[Defy] Stuck at Bootloader 09.10 - Err:A5,69,4E,00,41

I think the title kinda explains for itself!
From what I started and where I got?
Well, firstly, I tried to install 3.4.3-11 Motorola SBF with fixed Blur provided this link:
"Here you are, buddy
Fixed.SBF plus Nandroid of 3.4.3-11
http://www.multiupload.com/PB10JC9NQV"
(http://forum.xda-developers.com/showthread.php?t=966537&page=7)
I moved to the older PC still running Windows XP to manage RSD Lite 4.9 to work and recognize my Defy. (it apparently worked)
After wiping all data and cache, I started the phone in boot loader mode and tried to use RSD to load the SBF.
Everything seemed to be fine. But.....After RSD finished the update, it said for me to "turn on my Device". Well, it was already on and stuck at Motorola Logo.
I waited for quite some time, took a shower, smoke a cigar.... And, when I came back, nothing, phone was still on moto logo.
I force restarted the phone removing the battery. Still got stuck at moto logo for quite some time.
Sooooo, I decided to wipe everything again and try to install the SBF again, this time with the one provided by "Pays Rom" thread.
That was when stuff got bad.
After that, I got stuck at Bootloader with a "error code" indication.
Alright, it was time to read some more cause I realized I fked something up! Then, I find out I could load a Devtree SBF and that would unbrick the phone being able to install another SBF.
No succecs, eventhoug I tried to load those previous SBF, I still got problems either with RSD Lite or got stuck at bootloader with a that "error code" problem.
As I didnt know what else to do, I loadead back the devtree and got that different error code on the phone. (one mentioned on the thread title).
And, this is pretty much my whole problem! lol
Any Ideas what should I do?
My Defy is from Brazil - Claro and was running 2.1 android at the beggining!
Tyvm!

it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.

oct307 said:
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
Click to expand...
Click to collapse
Nothing yet.
Still trying to boot anything in it. If I ever find something, I'll let you know!
I'm getting this error now on RSD Lite when trying to load the SBF 3.4.3-11
Failed Flashing process. Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE003003F Adress: 0xB2383000 Command: ADDR (0xE023203F), phone conected
New error code prompted on Bootloarder:
Err:A5,70,39,00,27
Now it shows Motorola logo for a few seccconds.
Stuck at code 39 or smthing while trying to install another SBF (the one with PAys Rom)
Ok, it unstucked, now RSD shows "restarting" and the motorola logo is on screen.
Finally, it loaded.
I used Pays Rom after a few tries with the first fixed SBF and jumping to the Pays Rom SBF.
After sometime, it installed!!!!!
The phone just started!!!!!
How about your problem mate, wich point are u at?

To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
Thank you!
I managed to find that out by myself, but thanks for the help!!
I noticed it was a not downgradable version, but I don't really care as it fits what I was aiming and I don't have any intetions of going back to 2.1!

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode

hello,
I also have a similar problem, stuck on the bootloader but I have the "low battery cannot program" error. When I try to charge the battery, the battery appears with a "?" inside...
Does anyone already get this problem ? Battery out of order ? software problem ?

Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk

lanfearxt said:
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
this is the post: http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge

thanks for the link
it will help me saving my defy....

oct307 said:
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

try this
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.

slayps said:
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
Click to expand...
Click to collapse
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files

renatojf said:
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

neozhu said:
I'm having this same problem.. anyone successfully fixed this?
Click to expand...
Click to collapse
1) Try flashing on different PC to start fresh.
2) If you'd flashed so many sbf. You might not be able to remember them all. My guess is that you might be at froyo state(corrupted/failed system code), thus flashing another Eclair 2.1 sbf would not solve your issue. You must try on Froyo sbf only starting from bootloader mode and rsdlite 4.9 or 5.0.
3) Take note of your battery level as it might draining down while you attempting to put some resuraction on the device.
4) Try relax and take a bath and smoke a bigger cigar just like the OP of this thread did...

i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.

JDM-Bb said:
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
Click to expand...
Click to collapse
no signal..? have you try baseband switcher application..?

yes ive try that with no luck.

hELLO
Please, tell me how to solve that problem with bootloader error A5, 70, 39,00 27 in my defy?? You have said you solved it. please help

you need to be calm and cool with lot of patience. It takes upto 10 - 15 Minutes...
the flashing happens at the speed of your computer.
try to use original cables and use USB ports of your desktop motherboard or laptop without any extension cables.
keep your pc in NO SLEEP mode. Batter should be almost full before flashing ...these are some tips...

[Q] Proplem With Motorola Flipside (Froyo)

I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo

yosry93 said:
I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo
Click to expand...
Click to collapse
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
http://db.tt/H2RuCD8h

What?
pre4speed said:
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
Click to expand...
Click to collapse
Sorry it may look like i'm a noob, but what is "Stock Sbf with rsd" ??

I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader

yosry93 said:
I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader
Click to expand...
Click to collapse
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.

phapsubongtoi said:
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.
Click to expand...
Click to collapse
I reflashed it 3 times , Still stucked on that Bootloader !!

yosry93 said:
I reflashed it 3 times , Still stucked on that Bootloader !!
Click to expand...
Click to collapse
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader http://db.tt/FuXac7kG

Seems to be my falt
pre4speed said:
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader
Click to expand...
Click to collapse
Ok i flashed it . and flashed the sbf i'm using agian
SAGE_U3_10.23.20_SIGNATT_USASAGE02B25ND0ATTNA02E.0R_PDS001_SAGEATT_P033_HWp4_1FF.sbf
but the same problem, should i use the SBF u told me about or any other??
The SBF i used is also for Flipside, the rsd says successful, and PASS is the result but still stacked in that Bootloader whatever i rebooted using power button or replaced the battery, known that i cannot open Recovery (X+Power Button) to wipe data

Thank You
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu

yosry93 said:
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu
Click to expand...
Click to collapse
You are quite welcome. Been so long since I've used or looked at my flopside (no typo lol) that I had forgotten froyo needed the updated bootloader first. Glad its working again.

[BRICKED] Droid Razr M

Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this

iSleek said:
Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this
Click to expand...
Click to collapse
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432

Thanks so much for your reply Downloading and trying right now! Will update soon!

crazy4android said:
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?

iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
I've heard of the error before from other threas but i dont recall what the problem was...did you install the motorola drivers? I really dnon't know what it could be..I've nevr had any trouble with it and i've done it a couple of times..

iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.

iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
Open the xml inside the zip you're flashing and remove the line:
Code:
<step operation="flash" partition="partition" filename="gpt.bin" MD5="5B3FD782141145E4BD1C9270D954AFF1" />

Yeah modifying the xml file is necessary, but also make sure your phone is charged above 50 percent. Low battery causes some funky errors with RSD.
Also what version of android were you running? I'd try flashing the new stock KK with RSD to at least get it up and running....then worry about flashing a custom.
The good thing is if you're getting into fastboot, you're not hard bricked and it's salvageable with some work!
Sent from my DROID RAZR M using XDA Free mobile app

Is your boot loader unlocked?
Sent from my XT907 using XDA Free mobile app

Hi,
To answer all the questions:
1- Is your boot loader unlocked? No
2- I've modified the XML file and removed the lines I was advised to remove.
3- Not sure what exact version of Android the device was running, as it's not mine. Also, what is "stock KK"???
4- ezknives, I've read through the post and basically the guy removed lines from the XML file - did that, also uninstalled Moto stuff and installed Motocast. No joy.
Right now, RSD shows the error message "Failed flashing process. 1/16 flash sbl1 "sbl1.mbn" -> Phone returned FAIL."
I am using the 4.4.2 firmware found here: http://sbf.droid-developers.org/phone.php?device=8
Other ideas?

One more bit of info. The eBay seller reports the phone had "Android 4.0.4 Ice Cream Sandwich" installed when she purchased it. Not sure if she updated it or not, but I don't think so. Does this new information change anything?
EDIT: I downloaded and tried out the 4.0.4 version from http://sbf.droid-developers.org/phone.php?device=8 but it stops at the same steps, even after editing out the XML file.
Also tried the utility found here: http://forum.xda-developers.com/showthread.php?t=2207419&page=2 (the latest version).. seems that it does some work but the device still doesn't respond. Gets stuck at Android logo.. and I've tried RSD with all I have (4.0.4 and newwer) but no luck.

OK so.. somehow I managed to flash the stock 4.4.2 version after many tries - using RSD.. it now boots but only to a frozen "M" logo.. and keeps cycling back to it.. any ideas?

ezknives said:
This guy had the same error read through that post.
Click to expand...
Click to collapse
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!

iSleek said:
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!
Click to expand...
Click to collapse
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432

ezknives said:
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
ATTACK said:
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
This would be the 4th time successfully flashing 4.4.2 with RSD Lite, but I will do it just to see what happens. About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!

iSleek said:
About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!
Click to expand...
Click to collapse
Head to the link I posted and read the FAQ section.

Back camera not working.. Need Help plz

Hi Friends.. Need some help... From last 3 days my device Back camera is not working.... Tried many camera apps but only front camera working.. Yesterday it showed the button to Switch to back camera, but when I clicked it, only blank screen use to come with a message (Media server died closing camera... Sometimes it used to say Can't connect to camera) tried force stop and clearing data... Didn't work.. From today morning it's not even showing the button to Switch to back camera... What to do??
Running Xenon HD rom.. Tried flashing AOSP EXTENDED ROM and restored my backup of 6.0.1 Resurrection Remix... It didn't help either... Plz need suggestions

flash factory firmware.

bablu048 said:
flash factory firmware.
Click to expand...
Click to collapse
Where can I find that for my xt1562? Can I do that with TWRP... I don't have a PC

syedafzal.shah said:
Where can I find that for my xt1562? Can I do that with TWRP... I don't have a PC
Click to expand...
Click to collapse
https://firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1562/
You need a PC for this.

bablu048 said:
https://firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1562/
You need a PC for this.
Click to expand...
Click to collapse
In that Link Indian Version has 0 Bytes size.....

syedafzal.shah said:
In that Link Indian Version has 0 Bytes size.....
Click to expand...
Click to collapse
Its 1.3gigs mpd24-107-70-1
"XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.xml.zip"

bablu048 said:
Its 1.3gigs mpd24-107-70-1
"XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.xml.zip"
Click to expand...
Click to collapse
One last thing... Is there any way to flash this without PC..? Iam running on a custom ROM and I have TWRP.... And If PC is the only way then How to Do that..? I checked few sites about flashing a firmware but they all are saying that to flash that we must type some codes and some of those codes will be different for every device....

syedafzal.shah said:
One last thing... Is there any way to flash this without PC..? Iam running on a custom ROM and I have TWRP.... And If PC is the only way then How to Do that..? I checked few sites about flashing a firmware but they all are saying that to flash that we must type some codes and some of those codes will be different for every device....
Click to expand...
Click to collapse
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.

bablu048 said:
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
Click to expand...
Click to collapse
OK.. Will try after few days as I don't have PC now... Thanks

bablu048 said:
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
Click to expand...
Click to collapse
RSD Lite not detecting My device

syedafzal.shah said:
RSD Lite not detecting My device
Click to expand...
Click to collapse
it should enable developer-options and adb-debugging. and i think rsd lite doesn't work on windows 10, try it on windows 7 machine.

bablu048 said:
it should enable developer-options and adb-debugging. and i think rsd lite doesn't work on windows 10, try it on windows 7 machine.
Click to expand...
Click to collapse
OK... So last night I flashed the stock firmware... By typing all codes manually... Running stock Rom now.. But still back camera not working.. It's not even showing the button switch to back camera in camera app
Update : It wsas a hardware issue... went for repair.. It works now... Thanks