Axon 7 Hard Bricked - ZTE Axon 7 Questions & Answers

Hi, this is my first post on XDA. Excuse me if it isn´t very well made, Im writting this very quickly :c
I have an Axon7 (China version) and I flashed the U.S Version, however I lost my mobile network (ATT) signal and got a ¨No service¨text.
I flashed lineage OS to check if that would help me, flashed the universal bootloader and got it working, but I still had the no service error.
I decided to go back to stock nougat so I used Xiamiflash to try to flash the B19 firmware, it flashed succesfully but when I tried to turn it on I noticed my phone would get stock in Factory Test Mode, I flashed it succesfully but my phone wouln´t turn on, it gets stuck in a red Led and a black screen, i cant even get it to EDL mode :c
Please help.​EDIT: I got my phone back on, I don´t know how, But I still have no service, I will create another Thread

Your PC see to device? BTW, don't flash us stock rom Via miflash tool. Just use twrp.

WesTD said:
Your PC see to device? BTW, don't flash us stock rom Via miflash tool. Just use twrp.
Click to expand...
Click to collapse
Yes, my pc now detects my phone in EDL, however I dont know wich package to flash , I can´t acces TWRP

Helacornio said:
Yes, my pc now detects my phone in EDL, however I dont know wich package to flash , I can´t acces TWRP
Click to expand...
Click to collapse
try this one
https://4pda.ru/forum/index.php?showtopic=814221&st=1080#entry62253492

WesTD said:
try this one
https://4pda.ru/forum/index.php?showtopic=814221&st=1080#entry62253492
Click to expand...
Click to collapse
Thank you for the help , It somehow restored but now I get a no service error :c I think it is because my EFS probably got corrupted :c

Helacornio said:
Thank you for the help , It somehow restored but now I get a no service error :c I think it is because my EFS probably got corrupted :c
Click to expand...
Click to collapse
There is no IMEI?

WesTD said:
There is no IMEI?
Click to expand...
Click to collapse
Exactly, I get a unkwnown imei error, however i still have my both imeis on my phone box, I dont know how to restore them

Helacornio said:
Exactly, I get a unkwnown imei error, however i still have my both imeis on my phone box, I dont know how to restore them
Click to expand...
Click to collapse
Do you have TWRP or can you?

WesTD said:
Do you have TWRP or can you?
Click to expand...
Click to collapse
I have TWRP Can I use it to restore my IMEI?

firstly try to flash B16 bootstack. check your imei. i don't anything else.

WesTD said:
firstly try to flash B16 bootstack. check your imei. i don't anything else.
Click to expand...
Click to collapse
it did not helped, I still get no signal :c

Helacornio said:
it did not helped, I still get no signal :c
Click to expand...
Click to collapse
Okay, try this guide
Follow it EXACTLY and you should get your IMEI back.

KwesiJnr said:
Okay, try this guide
Follow it EXACTLY and you should get your IMEI back.
Click to expand...
Click to collapse
TYSM But, how can i get the Qualcomm driver if I cant get it from Driver identifier :c.
Can you please send me the Qualcomm driver?

Helacornio said:
TYSM But, how can i get the Qualcomm driver if I cant get it from Driver identifier :c.
Can you please send me the Qualcomm driver?
Click to expand...
Click to collapse
Sure: https://www.androidfilehost.com/?fid=817550096634746189
All the best.

KwesiJnr said:
Sure: https://www.androidfilehost.com/?fid=817550096634746189
All the best.
Click to expand...
Click to collapse
I installed the drivers but my pc refuses to detect it :c

Helacornio said:
I installed the drivers but my pc refuses to detect it :c
Click to expand...
Click to collapse
You need to reboot your PC to Driver Enforcing mode if that happens.
Can you elaborate on what you mean by "refuses to detect it"?

KwesiJnr said:
You need to reboot your PC to Driver Enforcing mode if that happens.
Can you elaborate on what you mean by "refuses to detect it"?
Click to expand...
Click to collapse
It detects it but says that the device has no driver available.
It marks ZTE HSUSB Device but it says it has no driver installed

Helacornio said:
It detects it but says that the device has no driver available.
It marks ZTE HSUSB Device but it says it has no driver installed
Click to expand...
Click to collapse
OK, I got it to work, however , I cant get on my network :c

Helacornio said:
OK, I got it to work, however , I cant get on my network :c
Click to expand...
Click to collapse
Maybe it's time you tried a clean reset. The IMEI is unlikely to be wiped anymore...if you don't do anything drastic.
I would suggest you try MiFlash with the B19-NOUGAT_TWRP (Nougat 7.1.1) package from this thread, then flash the stock ROM afterward in TWRP.

Related

[Q] ZTE U930HD ROOTAndUpgrade

hi i need help
i ahve ZTE U930HD on 4.0.3 android version
i want to root it and upgrade it
could anybody help me
I need help too, and need help with 3g network.
How do you modify modem.img for 3g network?
Anyone?
NomiRana said:
hi i need help
i ahve ZTE U930HD on 4.0.3 android version
i want to root it and upgrade it
could anybody help me
Click to expand...
Click to collapse
I rooted it with this tool:
http://pan.baidu.com/share/link?shareid=431343&uk=2147697835
it is in chinese, but is pretty automatic.
It will flash you a recovery mod in chinese also.
Still trying to find a recovery in english at least.
chinese...
Hello, how i root the phone with this app? I installed it and the superuser too, but dont know, how to reboot to the recovery :-/ Can you tell me, how you do that?
tweetycontrabajo said:
I rooted it with this tool:
it is in chinese, but is pretty automatic.
It will flash you a recovery mod in chinese also.
Still trying to find a recovery in english at least.
Click to expand...
Click to collapse
dlouhyo said:
Hello, how i root the phone with this app? I installed it and the superuser too, but dont know, how to reboot to the recovery :-/ Can you tell me, how you do that?
Click to expand...
Click to collapse
reboot in to recovery, power off the phone, and power on, pressing volume down, until it enters recovery mode.
tweetycontrabajo said:
reboot in to recovery, power off the phone, and power on, pressing volume down, until it enters recovery mode.
Click to expand...
Click to collapse
It worked, thx. But now, I had a bigger problem. After I rooted the phone, it cant connect to the mobile network, I even can´t make a phone call. I write - No service. I tried 3 sim cards including my own, which worked in this phone before the root :-/ I cant install gapps, becose it write, that it cant verify the signature. Can this be undone somehow? Because now the phone is useless
dlouhyo said:
It worked, thx. But now, I had a bigger problem. After I rooted the phone, it cant connect to the mobile network, I even can´t make a phone call. I write - No service. I tried 3 sim cards including my own, which worked in this phone before the root :-/ I cant install gapps, becose it write, that it cant verify the signature. Can this be undone somehow? Because now the phone is useless
Click to expand...
Click to collapse
flash the stock firmware.
tweetycontrabajo said:
flash the stock firmware.
Click to expand...
Click to collapse
I'd like to, but i don't know, where to find it and how to do it. Could it be done from some back up, that you can create from your phone?
dlouhyo said:
I'd like to, but i don't know, where to find it and how to do it. Could it be done from some back up, that you can create from your phone?
Click to expand...
Click to collapse
i don't have the phone. sorry, you need to google the firmware yourself.
tweetycontrabajo said:
i don't have the phone. sorry, you need to google the firmware yourself.
Click to expand...
Click to collapse
I fix it with original zte update. Now its working like new, even the mobile data i working
dlouhyo said:
I fix it with original zte update. Now its working like new, even the mobile data i working
Click to expand...
Click to collapse
How can i use "the original zte update"? Could you please give a link? I would like to try rooting but first want to be sure i can redo it.

[HELP!] I think I messed up my EFS partition and I don't have a backup....

I was VERY stupid. I went back to stock Oxygen OS using a fastboot image and now if I dial #*06# the IMEI box shows up but no IMEI number is actually in the box it is just blank. I did post about this before but last time I didn't really know what happened I was asking if anyone could tell me what they thought happened. I am pretty sure I screwed up the EFS partition and I am just wondering what I need to do now. Is there some way I can repair it I mean I don't have a backup. Can I contact OnePlus support? I really need help.
ethanscooter said:
I was VERY stupid. I went back to stock Oxygen OS using a fastboot image and now if I dial #*06# the IMEI box shows up but no IMEI number is actually in the box it is just blank. I did post about this before but last time I didn't really know what happened I was asking if anyone could tell me what they thought happened. I am pretty sure I screwed up the EFS partition and I am just wondering what I need to do now. Is there some way I can repair it I mean I don't have a backup. Can I contact OnePlus support? I really need help.
Click to expand...
Click to collapse
Where did you find the fastboot file?
________
v7
XDA Assist
v7 said:
Where did you find the fastboot file?
________
v7
XDA Assist
Click to expand...
Click to collapse
I forgot where I found it from... do you know where he correct one is?
ethanscooter said:
I forgot where I found it from... do you know where he correct one is?
Click to expand...
Click to collapse
There's no official fastboot zip from the Oneplus.That's why I asked you.Did you find it from XDA?
__
v7
XDA Assist
v7 said:
There's no official fastboot zip from the Oneplus.That's why I asked you.Did you find it from XDA?
__
v7
XDA Assist
Click to expand...
Click to collapse
I forgot, honestly this happened a few weeks ago I tried looking through my history but I couldn't find it. How can I fix it?
EDIT: It wasn't from XDA for sure.
ethanscooter said:
I was VERY stupid. I went back to stock Oxygen OS using a fastboot image and now if I dial #*06# the IMEI box shows up but no IMEI number is actually in the box it is just blank. I did post about this before but last time I didn't really know what happened I was asking if anyone could tell me what they thought happened. I am pretty sure I screwed up the EFS partition and I am just wondering what I need to do now. Is there some way I can repair it I mean I don't have a backup. Can I contact OnePlus support? I really need help.
Click to expand...
Click to collapse
This happened to me a few times in the past, all I had to do was wipe dalvik and cache again and it came back. Not sure if it's the same issue but I would give it a shot. Just boot into recovery and wipe them again and see if it gets you back up and running.
_MetalHead_ said:
This happened to me a few times in the past, all I had to do was wipe dalvik and cache again and it came back. Not sure if it's the same issue but I would give it a shot. Just boot into recovery and wipe them again and see if it gets you back up and running.
Click to expand...
Click to collapse
I tried it and still nothing...
http://forum.xda-developers.com/showpost.php?p=62440352&postcount=21
first try this.
then, flash H2OS. (Oxygen Os won't work from that recovery so, H2OS. Later you can re-flash though)
(Try this first!!!)
EDIT: if that doesn't reset, try this.
http://forum.xda-developers.com/one...over-oneplus-2-to-t3269543/page2#post64303240
Official O2OS files.
krishna442 said:
http://forum.xda-developers.com/showpost.php?p=62440352&postcount=21
first try this.
then, flash H2OS. (Oxygen Os won't work from that recovery so, H2OS. Later you can re-flash though)
(Try this first!!!)
EDIT: if that doesn't reset, try this.
http://forum.xda-developers.com/one...over-oneplus-2-to-t3269543/page2#post64303240
Official O2OS files.
Click to expand...
Click to collapse
I cannot use that because my device is not hard bricked and it will not install the driver since I can enter the bootloader normally.
Not sure if you've seen this post its based on the post above but I think it just uses fastboot. Don't know if it will work for you, but figured it would be worth a shot.
http://forum.xda-developers.com/showpost.php?p=62973446&postcount=2
I tried using the tool and it did not work, I purposely hard bricked the device to try it and still no signal or imei. Another problem is WiFi takes about 4 minutes just to turn on but I can live with that I just want service.
Basically flashing back the stock should bring back the efs. Let's see if someone has a solution. Sorry!
EFS files are unique to each phone. If the EFS is corrupt or damaged, and there is no backup, I don't know of any way to fix it ;_; You can try OnePlus support but they aren't as dumb as carrier warranty or other phone manufacturers. They'll be more likely to know what you did.
It is possible to restore your imei number, I did it on my brothers lg g2. It requires some software for PC (I can't remember the name, you'll have to google it) and the box your phone came in with the imei number. It is possible, so don't lose hope!
EddyH1993 said:
It is possible to restore your imei number, I did it on my brothers lg g2. It requires some software for PC (I can't remember the name, you'll have to google it) and the box your phone came in with the imei number. It is possible, so don't lose hope!
Click to expand...
Click to collapse
Is it called QPST configuration? If so all I need help with is getting the phone to be recognized by the tool. Don't you need it to be on some COM port or something?
ethanscooter said:
Is it called QPST configuration? If so all I need help with is getting the phone to be recognized by the tool. Don't you need it to be on some COM port or something?
Click to expand...
Click to collapse
Yeh that software rings a bell and yeh I believe it's something like com port 47 maybe. It was a while ago when I did it and I can't remember the process of doing it :/
EddyH1993 said:
Yeh that software rings a bell and yeh I believe it's something like com port 47 maybe. It was a while ago when I did it and I can't remember the process of doing it :/
Click to expand...
Click to collapse
Don't I need a special driver? Also, do I need to put the phone into diag mode and how would I do that?
ethanscooter said:
Don't I need a special driver? Also, do I need to put the phone into diag mode and how would I do that?
Click to expand...
Click to collapse
Have a look at this link http://droidmodderx.com/galaxys3/?page_id=79 I really can't remember how I did it and without researching again I won't know. It's a rough idea to maybe help you, I think the device just needs to be in USB debugging mode. I can't help anymore sorry and good luck.
any fix for this yet?
Same problem also with my op2 . No imei no baseband

A2017U Completly bricked

Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
I couldn't make the youtube thinggy work lol but here's the link in case you guys wanna know what's going on with my piece of brick lol
https://www.youtube.com/watch?v=xX8_RgSS5x0
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
bkores said:
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
Click to expand...
Click to collapse
Thanks man i tried that one too no luck :C
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Yes man i tried it but i had no luck :C, thanks
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
J0nhy said:
Yes man i tried it but i had no luck :C, thanks
Click to expand...
Click to collapse
Use this driver
Restart - enter EDL again
Flash "B15-NEW_FULL (Nougat)" (the full one, not the twrp one)
lafester said:
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
Click to expand...
Click to collapse
Cannot turn off or on my device i cannot not do anything the only thing it does is a sound every time i plug it in to my pc
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
lafester said:
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
Click to expand...
Click to collapse
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Thanks. I kept getting partition type errors. The link you posted kept having network errors and dropping. It wasn't till after midnight pst that I got a stable connection and downloaded the whole thing. It flashed great and my phone is up and running. I was thinking I would have to send my phone in.
J0nhy said:
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
Click to expand...
Click to collapse
Yeah that's the kind of errors that suck /real/ bad. Good on you for not giving up. Now you know and you'll help spread the gospel of "keep trying until you can prove that it's actually an issue".

no imei no network no finger print sensor working...xt1643

i flashed stock rom https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
and now i have no network and my finger print sensor is not working...
then i flashed the 23.1 build
https://drive.google.com/file/d/0B6R99CgoFhmKQUVMVWE4ckEyRms/view
still its not working.
someone please help me.
jayeshaupe90 said:
i flashed stock rom https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
and now i have no network and my finger print sensor is not working...
then i flashed the 23.1 build
https://drive.google.com/file/d/0B6R99CgoFhmKQUVMVWE4ckEyRms/view
still its not working.
someone please help me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
Try this
blackbeats said:
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
try this
Click to expand...
Click to collapse
u had the same problem?
jayeshaupe90 said:
u had the same problem?
Click to expand...
Click to collapse
nope but i have read threads most suggested to updat to nougat modem and device specific framework
jayeshaupe90 said:
u had the same problem?
Click to expand...
Click to collapse
i am not able to flash .
I does not detect my phone
model: Usb imei not showing
and when i click on start it says failed gpt.bin something
jayeshaupe90 said:
i am not able to flash .
I does not detect my phone
model: Usb imei not showing
and when i click on start it says failed gpt.bin something
Click to expand...
Click to collapse
“Failed gpt.bin” something doesn't help us, or you.
Tell us the exact errors shown. We'll be then able to help you out to the best of our ability.
From my knowledge, you cannot flash a gpt partition file of an older ROM. You should, as Blackbeats mentioned, flash only the modem partition from the correct ROM for your device.
@jayeshaupe90
I think your phone became G4 (not plus !! )...
This happened because of flashing wrong firmware.. and this has no solution till now...
Check this [ https://forum.xda-developers.com/moto-g4-plus/help/moto-g4-pluss-model-changed-to-g4-lost-t3496912 ]
If this happened (your phone became G4) then we cannot do anything to help you, otherwise correct me...
PS. Anyhow someone found solution for network.. read on second page of that thread..
zeomal said:
“Failed gpt.bin” something doesn't help us, or you.
Tell us the exact errors shown. We'll be then able to help you out to the best of our ability.
From my knowledge, you cannot flash a gpt partition file of an older ROM. You should, as Blackbeats mentioned, flash only the modem partition from the correct ROM for your device.
Click to expand...
Click to collapse
as an experimental idea flash twrp then a custom rom then the modem file and see if it detects
PS then jtaging is the last option
jayeshaupe90 said:
i am not able to flash .
I does not detect my phone
model: Usb imei not showing
and when i click on start it says failed gpt.bin something
Click to expand...
Click to collapse
one more casualty, sorry I'm out of tears over my own dead set!
others are also trying, maybe different path to hell, but same result: https://forum.xda-developers.com/moto-g4-plus/help/diag-mode-g4-qpsd-t3591683/page3
BlackBeats said:
as an experimental idea flash twrp then a custom rom then the modem file and see if it detects
PS then jtaging is the last option
Click to expand...
Click to collapse
no success
jayeshaupe90 said:
no success
Click to expand...
Click to collapse
Then jtag it go to the nearest repair shop and get the software restored
BlackBeats said:
Then jtag it go to the nearest repair shop and get the software restored
Click to expand...
Click to collapse
if jtag is what i understand it to be is handing it over to Moto-the-BI*** repair shop, he can't.
his bootloader is unlocked so they are basically going to replace the board which is 80% of phone price.
MK+2017 said:
if jtag is what i understand it to be is handing it over to Moto-the-BI*** repair shop, he can't.
his bootloader is unlocked so they are basically going to replace the board which is 80% of phone price.
Click to expand...
Click to collapse
Try some unauthorized shop local shop
There seems to be a lot of lost IMEIs in the G4 Plus Community, I and a few others have narrowed it down to NV Data corruption, which needs a flash box or a new logic board AFAIK. Good luck mate!

BRICKED! any fkx for this?

Hi guys
Well after messing with my phone trying to get root I finally bricked it big time. No power at all. Totally dead. Except it does show 9008 mode when connected to the computer.
I had gotten TWRP installed in the DirtySanta rooting process then flashed a stock ROM and then flashed Super SU. I flashed super su immediately following the flashing of the ROM. Not sure if I was supposed to reboot THEN flash super su. But I read in a thread that I didnt need to reboot between ROM and super su.
It was totally my fault...looking for a possible fix..as small a chance of that maybe.
Tha ks in advance!
markmessier8888 said:
Hi guys
Well after messing with my phone trying to get root I finally bricked it big time. No power at all. Totally dead. Except it does show 9008 mode when connected to the computer.
I had gotten TWRP installed in the DirtySanta rooting process then flashed a stock ROM and then flashed Super SU. I flashed super su immediately following the flashing of the ROM. Not sure if I was supposed to reboot THEN flash super su. But I read in a thread that I didnt need to reboot between ROM and super su.
It was totally my fault...looking for a possible fix..as small a chance of that maybe.
Tha ks in advance!
Click to expand...
Click to collapse
If there is kdz for your model you can flash that.
Still_living714 said:
If there is kdz for your model you can flash that.
Click to expand...
Click to collapse
Yes i have the .kdz file but how to run the program
You can't flash KDZ when the phone is in 9008 mode. There are no options currently. Your phone is as good as dead.
But, we are looking into a de-BRICK method, involving SD-Card boot. May or may not work.
Still_living714 said:
If there is kdz for your model you can flash that.
Click to expand...
Click to collapse
askermk2000 said:
You can't flash KDZ when the phone is in 9008 mode. There are no options currently. Your phone is as good as dead.
But, we are looking into a de-BRICK method, involving SD-Card boot. May or may not work.
Click to expand...
Click to collapse
Ok..cross my fingers
Can the LG service center fix this if I bring my phone to them?
markmessier8888 said:
Ok..cross my fingers
Can the LG service center fix this if I bring my phone to them?
Click to expand...
Click to collapse
If not fix, they probably will replace the motherboard for you, if you're under warranty.
askermk2000 said:
If not fix, they probably will replace the motherboard for you, if you're under warranty.
Click to expand...
Click to collapse
Ok thx!
Will the LG service center know that I tried to root or tried to modify my phone?
I will go in person to my local LG service center tomorrow
Probably will not if they simply replace the motherboard.
That is what they seem to do, but I can't be sure. Might depend on the service center.
When I bricked mine the first time they just did a MB swap, but I specifically told them I flashed the wrong file. I didn't mention root though. I let them imply that I used LG UP and it failed somehow
Do you guys think the reason it bricked is because of the wrong ROM or because I didnt reboot after installing the ROM and flashed SUPER SU directly after and then I rebooted?? I did it through TWRP
markmessier8888 said:
Do you guys think the reason it bricked is because of the wrong ROM or because I didnt reboot after installing the ROM and flashed SUPER SU directly after and then I rebooted?? I did it through TWRP
Click to expand...
Click to collapse
9008 is usually due to flashing the wrong kdz or erasing your bootloader. a rom will not cause 9008

Categories

Resources