Database Users

[Q] Question installing custom rom 0x0 for my s5

There are so many threads, I am lost. My S5 is G900F ANE2. So some questions as I want root and a debloated custom rom while keeping 0x0:
I want to keep 0x0, what root method is available for my model?
Once rooted and flashed; how can I go back to non-rooted stock rom if necessary?
what custom rom and installation method are there for my model?

yeahman45 said:
There are so many threads, I am lost. My S5 is G900F ANE2. So some questions as I want root and a debloated custom rom while keeping 0x0:
I want to keep 0x0, what root method is available for my model?
Once rooted and flashed; how can I go back to non-rooted stock rom if necessary?
what custom rom and installation method are there for my model?
Click to expand...
Click to collapse
You can use Towelroot to root and keep KNOX on 0x0. and install Xposed framework. You could also flash the pre-rooted latest NeatRom http://forum.xda-developers.com/galaxy-s5/development/rom-neatrom-v1-t2828562 with Odin 3.09 and also keep KNOX to 0x0. Thats about it, most other custom roms need to be flashed with a custom recovery.

Towelroot says my device is not compatible ... for neatrom, which installation procedure should I use?
"Installation Instructions: If you're coming from a Samsung stock NON-Rooted ROM before NG2/NG7/NG9/NH4/NH6 (KNOX 0x0)"??
what is NG2, etc...? How to know if mine is after or before that??
edit: neatrom says it needs towelroot to root the phone but towelroot says my phone isn't currently supported

yeahman45 said:
Towelroot says my device is not compatible ... for neatrom, which installation procedure should I use?
"Installation Instructions: If you're coming from a Samsung stock NON-Rooted ROM before NG2/NG7/NG9/NH4/NH6 (KNOX 0x0)"??
what is NG2, etc...? How to know if mine is after or before that??
Click to expand...
Click to collapse
Download Neatrom and flash it according to these instructions (from the NeatRom thread) with Mobile Odin Pro:
Installation Instructions: If you're coming from a Samsung stock NON-Rooted ROM before NG2/NG7/NG9/NH4/NH6 (KNOX 0x0)
1. Backup your Internal SD to your PC
2. Go to Settings/Security/ and UN-TICK "Reactivation lock"
3. Go to Settings/Security/Security policy updates/ and UN-TICK "Automatic updates"
4. Go to Settings/Security/ and UN-TICK "Send security reports"
5. Go to Settings/About device/Software update/ and UN-TICK "Auto update"
6. Root your phone with Towelroot---pic1---pic2
7. Reboot and install SuperSu from the PlayStore
8. Run SuperSU and select "Continue", "Normal" and "OK". ---pic1,---pic2,---pic3 Wait a few seconds and then reboot device
9. Run SuperSU again and select "Try to disable KNOX"---pic1,---pic2
10. Reboot and download NeatROM onto your phone
11. Check the md5sum of the NeatROM.zip
12. Purchase and install Mobile Odin Pro
13. Run Mobile Odin Pro---pic1---pic2
14. Load the NeatROM.zip file with "OTA / Update ZIP"---pic1,---pic2
15. UN-TICK "Enable EverRoot" (NeatROM is already rooted)---pic1
16. UN-TICK "Wipe data and cache"---pic1
17. UN-TICK "Wipe Dalvik cache"---pic1
18. Select "After flash..." then select "Download mode"---pic1,---pic2
19. Select "Flash firmware"---pic1
20. Once the Aroma Installer starts, select the options that you would like to install
21. When the ROM has finished installing, and at the end of the installation process in Aroma, UN-TICK "Reboot Device"---pic1
22. When the phone goes into Download Mode, download and open PC Odin
23. Extract and flash MODEM (load as CP) and BOOTLOADER (load as BL) in ONE STEP---pic1---pic2
24. If something goes wrong and your device will not boot after flashing, try to remove the battery for a few moments and then put it back in, press and hold VolumeUP + Home + Power to boot the device into recovery mode and do a "wipe Data/factory reset" then "reboot system now"
25. Go to Settings/Security/ and UN-TICK "Reactivation lock"
26. Go to Settings/Security/Security policy updates/ and UN-TICK "Automatic updates"
27. Go to Settings/Security/ and UN-TICK "Send security reports"
28. Enjoy your NeatROM with KNOX 0x0
Basicaly root the phone, install superSU and BusyBox from Play, install Mobile Odin Pro and flash the rom with it. But follow the steps closely as discribed in the tutorial.

I am getting "phone is currently not supported" on towelroot..... got that also last time... have been searching for that issue for my model and can't find a solution...

http://www.naldotech.com/how-to-fix-towelroot-phone-isnt-supported-problem/
tried the solution here but still cannot root.. still gets "this phone isn't currently supported", tried all 3 modstrings

yeahman45 said:
http://www.naldotech.com/how-to-fix-towelroot-phone-isnt-supported-problem/
tried the solution here but still cannot root.. still gets "this phone isn't currently supported", tried all 3 modstrings
Click to expand...
Click to collapse
Try booting in recovery and wipe the cach, bootup and try TR again.

recovery? how to boot to samsung's recovery? there is wipe cache in the official samsung recovery??

yeahman45 said:
recovery? how to boot to samsung's recovery? there is wipe cache in the official samsung recovery??
Click to expand...
Click to collapse
Sure, power down the phone, wait a few seconds and press volume up + menu + power and it will boot into recovery. Then sesect wipe caches.

cache wiped... still cannot root what is wrong? is my S5 "fake" or what?

yeahman45 said:
cache wiped... still cannot root what is wrong? is my S5 "fake" or what?
Click to expand...
Click to collapse
Install CPU-Z or Phone Info for Samsung from Play to identify the device., but probably its not a fake one.

does not look fake.. seems genuine in cpuz. My baseband is actually G900F ANE2 but build number is G900F ANI3 ... is that normal?

yeahman45 said:
cache wiped... still cannot root what is wrong? is my S5 "fake" or what?
Click to expand...
Click to collapse
yeahman45 said:
does not look fake.. seems genuine in cpuz. My baseband is actually G900F ANE2 but build number is G900F ANI3 ... is that normal?
Click to expand...
Click to collapse
Baseband should be at least ANG8 for that firmware afaik. ANE2 is an old modem. You can download and install new modems from the XtreStoLite thread and flash it with Odin, will not trip KNOX. Was the device new when you bought it?

gee2012 said:
Baseband should be at least ANG8 for that firmware afaik. ANE2 is an old modem. You can download and install new modems from the XtreStoLite thread and flash it with Odin, will not trip KNOX. Was the device new when you bought it?
Click to expand...
Click to collapse
are you sure? Can I revert back if something goes wrong?

yeahman45 said:
are you sure? Can I revert back if something goes wrong?
Click to expand...
Click to collapse
Yes you can flash a modem sepereatly or flash a stock rom with Odin. BTW if you want to flash a modem you have to flash the latest bootloader first with Odin. BL are also posted in the XtreStoLite thread.

gee2012 said:
Yes you can flash a modem sepereatly or flash a stock rom with Odin. BTW if you want to flash a modem you have to flash the latest bootloader first with Odin. BL are also posted in the XtreStoLite thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=52210611&postcount=4
XtreStoLite thread says Bootloader: XXU1ANJ1 and Modem: XXU1ANJ1....these are the ones I need to flash?

yeahman45 said:
http://forum.xda-developers.com/showpost.php?p=52210611&postcount=4
XtreStoLite thread says Bootloader: XXU1ANJ1 and Modem: XXU1ANJ1....these are the ones I need to flash?
Click to expand...
Click to collapse
Yup, power down the phone, pull the battery, wait 20 seconds, uncheck Auto Reboot in Odin and flash the BL, when done pull the battery again, wait again and flash the modem and reboot. Place the bootloader in BL and modem in CP in Odin.

gee2012 said:
Yup, power down the phone, pull the battery, wait 20 seconds, uncheck Auto Reboot in Odin and flash the BL, when done pull the battery again, wait again and flash the modem and reboot. Place the bootloader in BL and modem in CP in Odin.
Click to expand...
Click to collapse
thx going to try it now

yeahman45 said:
thx going to try it now
Click to expand...
Click to collapse
updated bootloader and modem but still cannot root with towelroot ... still same message " This phone is currently not supported" How come? I have everything as described in its requirements

Hi

[Q] N900 Rooted With Custom ROM to Lollipop?

i've been reading this thread over in the General discussions:
http://forum.xda-developers.com/galaxy-note-3/general/lollipop-ota-note-3-n900-started-t2973773
i currently have K14-Dr.Ketan custom ROM flashed to my phone:
http://forum.xda-developers.com/showthread.php?t=2519897
and my recovery is TWRP v2.7.1.0
the CSC code is: INU.
at first, i thought i couldn't update to the Lollipop update because its CSC code is XXV/THL
but then i saw a reply somewhere in the midst saying to flash a 4.4.2 version to change my code to the proper one.
i'm not entirely sure what to do. any help would be much appreciated!
(typo edits)

mrhomiec said:
i've been reading this thread over in the General discussions:
http://forum.xda-developers.com/galaxy-note-3/general/lollipop-ota-note-3-n900-started-t2973773
i currently have K14-Dr.Ketan custom ROM flashed to my phone:
http://forum.xda-developers.com/showthread.php?t=2519897
and my recovery is TWRP v2.7.1.0
the CSC code is: INU.
at first, i thought i could update to the Lollipop update because its CSC code is XXV/THL
but then i saw a reply somewhere in the midst saying to flash a 4.4.2 version to change my code to the proper one.
i'm not entirely sure what to do. any help would be much appreciated!
Click to expand...
Click to collapse
It take time to change csc code.
Read this topic and change to XXV.
http://forum.xda-developers.com/showthread.php?t=2342328

so i don't understand a few things in regard to the steps...
1b. You are on stock ROM but is on other's region firmware and is rooted (based on Samsung official firmware). Same, just download your stock latest update firmware from sammobile.com first. Which contains your region's CSC.
Click to expand...
Click to collapse
so since my stock custom ROM is INU-based, i go and download the INU firmware?
2. Ok, now both are on a stock ROM but rooted, check your CSC using the CSC Changer app.
3. If not working, then install ES File Explorer from Playstore or link below (recommended) or other file browser with Root access ability. Open the side menu and select Root Explorer.
Click to expand...
Click to collapse
i only found one app in the Play Store with this name, and it's 0.99 cents, before i buy it, is that the correct one? or if i don't want to buy it, i just continue with step 3?
7. Alright all done, reboot your phone first. Then reset the BIN counter using Triangle Away. (Again, friendly reminder: Do not enter CWM Recovery again as it will increase the BIN counter) Reboot and put your phone in Download mode. Flash the stock ROM you've downloaded though ODIN.
Click to expand...
Click to collapse
so if i go with the ES File Explorer route, i can then go straight into flashing the Lollipop firmware?
also, do i need the app Triangle Away? if i don't care about the BIN counter?
my goal is to be unrooted, on Lollipop, with/without Knox counter tripped.

It doesnt matter INU or whatever region. As long as your device is N900 , Just download NJ3 firmware with XXV region which download link given in that post or download from sammobile.
Secondly, better to do factory reset after u flashed NJ3.
3. No need to buy csc changer. Just install free"phone info" from play store and check ur csc and if not xxv, change ur csc code to xxv with that "phone info" application.
4. You may need to flash NJ3 again or wipe data until u see ur csc is xxv.
5. Follow the instruction about lollipop post.
6. You can skip supersu 2.40 step if u dont want a root.

satslu said:
3. No need to buy csc changer. Just install free"phone info" from play store and check ur csc and if not xxv, change ur csc code to xxv with that "phone info" application.
Click to expand...
Click to collapse
i found 2 apps on the Play Store, which one is it?
Phone Info *Samsung* (this one has more downloads and reviews)
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Phone Info
https://play.google.com/store/apps/details?id=sysinfo.sysinfo.sysinfo

mrhomiec said:
i found 2 apps on the Play Store, which one is it?
Phone Info *Samsung* (this one has more downloads and reviews)
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Phone Info
https://play.google.com/store/apps/details?id=sysinfo.sysinfo.sysinfo
Click to expand...
Click to collapse
The upper one.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo

satslu said:
The upper one.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Click to expand...
Click to collapse
thank you! just so i understand correctly, i use this app to change my code, then i can go straight to flashing the 5.0 firmware in Odin?

mrhomiec said:
thank you! just so i understand correctly, i use this app to change my code, then i can go straight to flashing the 5.0 firmware in Odin?
Click to expand...
Click to collapse
You may need to flash NJ3 again or wipe data until u see ur csc is xxv. Follow the instruction about lollipop post and yes u can start lollipop step.

i ended up following the "new" method posted to the original topic. and just in case anyone finds this thread, here are the exact steps i took:
1. Flash TWRP via ODIN
Click to expand...
Click to collapse
i was using Odin 3.09. put your N900 into download mode by powering it off, then holding the Vol Down + Home Button + Power Button.
then within Odin, click on the "AP" button and browse for the "openrecovery-twrp-2.8.1.0-ha3g.img.tar" file, and click the Start button
1.1 Enter TWRP and create Backup. (To safe)
Click to expand...
Click to collapse
boot to custom recovery by having your N900 powered off, then holding the Vol Up + Home Button + Power Button.
perform a nandroid backup, and reboot the phone back into Android
1.2. Copy unziped file at /twrp/4d00279c40989079/2014-12-18--00-18-21 LRX21V.N900XXUEBNL4 to phone /twrp/xxxxxx/2014-12-18--00-18-21 LRX21V.N900XXUEBNL4 where xxxxxx is unique generated for your device
Click to expand...
Click to collapse
now that your phone is backed up, copy the extracted "TWRP-LRX21V.N900XXUEBNL4-samsungviet.vn.zip" to your nandroid backup location
2. Enter TWRP -> Wipe -Swipe to Factory Reset
Click to expand...
Click to collapse
boot back into custom recovery (holding the Vol Up + Home Button + Power Button.)
3. Return TWRP Home -> Restore -> Select "2014-12-18--00-18-21 LRX21V.N900XXUEBNL4"
Click to expand...
Click to collapse
select the extracted folder as your restore state
4. Select everything to restore
Click to expand...
Click to collapse
for me, there was only 3 choices to select, and they were already pre-selected.
5. When finish Restore, return TWRP Home -> Reboot -> Download
Click to expand...
Click to collapse
i had to power off the phone instead of using TWRP to reboot into Download Mode, then do the Vol Down + Home Button + Power Button.
6. Flash Bootloader 5.0 (without Auto Reboot) then pull out battery and re-enter download mode
Click to expand...
Click to collapse
then in Odin, click the "BL" button and browse for the "bootloader-5.0.tar" and click Start
7. Flash stock recovery (with auto reboot)
Click to expand...
Click to collapse
after pulling the battery and putting it back in. boot to Download Mode again (Vol Down + Home Button + Power Button)
in Odin, click on the "AP" button, and browse for the "recovery.tar" and click Start
8. First boot will take 5-10 mins.
Click to expand...
Click to collapse
voila. done.
BLUETOOTH FIX
Flash cwm via odin (dont tick auto reboot)
Take off batre and cable. And take on again.
Press volume up + home + power button and get in recovery mode (cwm).
Flash bluetooth dix from this forum (http://forum.xda-developers.com/gala...-roms-t2938607)
Get in the download mode and flash stock recovery.
reboot and you can use your bluetooth again
Click to expand...
Click to collapse
although i don't understand this step.
it says to flash CWM even though the previous steps have you flash TWRP. (edit: and then the previous steps have you flash stock recovery)
then it says to flash the ZIP file within the custom recovery, boot to download mode, and flash stock recovery?
any help on this part?

Just consider yourself that you are now using android L which is with stoch recovery after u have done all procedure. And yes u facing bluetooth error.
So u have to flash custom recovery( CWM) to flash bluetooth fix zip. May be u can use twrp again to flash bluetoothfix zip.
Sent from my SM-N900 using Tapatalk
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
Once android L is running on ur machine , u can stay with stock recovery or custom recovery.
Sent from my SM-N900 using Tapatalk
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
Once android L is booted to ur machine you can stay with stock or custom recovery.
Sent from my SM-N900 using Tapatalk

satslu said:
Just consider yourself that you are now using android L which is with stoch recovery after u have done all procedure. And yes u facing bluetooth error.
So u have to flash custom recovery( CWM) to flash bluetooth fix zip. May be u can use twrp again to flash bluetoothfix zip.
Click to expand...
Click to collapse
oh yeah, duh. step 7- flash stock recovery.
so i tried to flash TWRP again and i received an error in Odin. i'm thinking it's because i have to root again.
without root, i can't fix the bluetooth then?

I dont think u need root for that.
May be u change ur recovery to CWM than twrp and flash bluetooth fix
Sent from my SM-N900 using Tapatalk

How To Root Samsung Galaxy SII GT-I9100

Applicable To Any GT-I9100 4.1.2 firmwares
NO YELLOW TRIANGLE :
Steps:
1. Save File To External Sd-Card
2. Shut Down Your Phone
3. Open Stock Recovery (press power + vol up + home button)
4. Install zip from external sd card
5. Select the file "CWM-SuperSU-v0.97.zip"
Wait and reboot
Another way to root your Galaxy SII , The most Easiest way to root is to flash siyah kernel on odin follow this tips
Step 1: Download Siyah Root Kernel for Galaxy S2 on computer and extract Odin v3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Power off the phone. Boot the device into Download Mode by pressing and holding Volume Down and Home buttons together, while simultaneously tapping the Power button until the device turns on. Now hit the Volume Up button to enter Download Mode.
Step 3: Launch Odin on computer as Administrator, as admin privileges are required to complete the root installation smoothly.
Step 4: Connect the phone to computer via USB cable while the phone is still in Download Mode. Wait until Odin detects the device. When the device is recognised successfully, the ID: COM box will turn yellow with the corresponding COM port number. Additionally, a message reading "Added!" will confirm that the device is connected successfully. If Odin fails to detect the device then re-install the phone's USB drivers.
Step 5: In Odin, select the PDA checkbox and click the Siyah-s2-v6.0b5.tar file.
Step 6: Ensure Auto Reboot and F. Reset Time checkboxes are selected in Odin. But, the Re-Partition option should be disabled or unchecked.
Step 7: Verify that step 6 is done correctly and then hit Start in Odin. The root installation process will now begin.
Step 8: Once the root installation completes, your phone will reboot and soon a PASS message with green background appears in the left-most box at the very top of Odin. You can now unplug the USB cable to disconnect the phone from computer.
XDA:DevDB Information
Samsung Galaxy SII GT-I9100, Tool/Utility for the Samsung Galaxy S II
Contributors
iistoryahi
Version Information
Status: Testing
Created 2015-08-18
Last Updated 2015-09-08

Tar File for odin , Zip file for recovery

For people who are afraid of handling around with recovery and Odin, I recommend to use Kingo Root. But thanks @iistoryahi for this easy method without PC!!
Gesendet: S2/ XDA Forums

BenjyTec said:
For people who are afraid of handling around with recovery and Odin, I recommend to use Kingo Root.
Gesendet: S2/ XDA Forums
Click to expand...
Click to collapse
Your right mate , but the purpose of this thread are those who don't know how to install or flash CWM on there phone with/without PC

Hi guys,
Thank you for the post. I would like to know if this rooting solution has already been tested?
Cheese

Waziri said:
Hi guys,
Thank you for the post. I would like to know if this rooting solution has already been tested?
Cheese
Click to expand...
Click to collapse
Yes i already test it on my own

ClockWorld Recovery
Does it install also Clock World Recovery after flashing? Thanks

Pier_89 said:
Does it install also Clock World Recovery after flashing? Thanks
Click to expand...
Click to collapse
No , but you can flash now cwm. If you want cwm flash siyah kernel on odin

Thank you for the tutorial...I need it
Inviato dal mio GT-I9100 con Tapatalk 2

bixi said:
Thank you for the tutorial...I need it
Inviato dal mio GT-I9100 con Tapatalk 2
Click to expand...
Click to collapse
Your welcome mate , Happy to hear that i help someone

Thank you. This was very useful.

Edd91 said:
Thank you. This was very useful.
Click to expand...
Click to collapse
Welcome mate

can i root my SG S2 GT-I9100 with kingo root apk and flash cwm recovery with "Rom Manager "App ????

tissaoui said:
can i root my SG S2 GT-I9100 with kingo root apk and flash cwm recovery with "Rom Manager "App ????
Click to expand...
Click to collapse
kingo user does not provide 100% su files and the binary. So try FramaRoot or The solution iistoryhai did in #1 post
Ντε καψω την Μπουφαν Ρε μέσω tapatalk

but can i flash cwm recovery with Rom Manager app or their is another method ???

tissaoui said:
but can i flash cwm recovery with Rom Manager app or their is another method ???
Click to expand...
Click to collapse
When I tried ROM Manager last time, it was quite useless. I recommend to flash the tar file via Odin. Or search for a recovery that can be flashed via stock recovery. Hope this helps.

iistoryahi said:
Your welcome mate , Happy to hear that i help someone
Click to expand...
Click to collapse
how to root gt 19100 runing firm 4.4.4 bec i did it but on boating yellow triangle with exclamation point

tissaoui said:
but can i flash cwm recovery with Rom Manager app or their is another method ???
Click to expand...
Click to collapse
You can easly flash cwm recovery through stock recovery , just download the cwm.zip then flash in recovery or you can flash through odin by flashing the cwm.tar file

bel432 said:
how to root gt 19100 runing firm 4.4.4 bec i did it but on boating yellow triangle with exclamation point
Click to expand...
Click to collapse
You successfully did it , but with boating yellow triangle with exclamation mark ? The yellow triangle exclamation mark is a sign that your GT-I9100 is running a custom firmware or after you flash via odin. You can remove it by using triangle away to reset the flash counter , download it on playstore or my attachment

after rooting my GS 2 can i flash any cwm recovery.zip from the stock recovery : )

[Q] root J500FXXU1BPH1

anyone managed to root J500FXXU1BPH1?
MM android

broucker said:
anyone managed to root J500FXXU1BPH1?
MM android
Click to expand...
Click to collapse
Yea just download twrp and latest su zip file. Now flash twrp via odin(make sure autoreboot in odin is unticked) hold buttons to go into twrp thengo to install and flash the suzipfile.
Just remember usb debugging on and oem unlocked.
Sent from my SM-J500F using Tapatalk

Khanmodx said:
Yea just download twrp and latest su zip file. Now flash twrp via odin(make sure autoreboot in odin is unticked) hold buttons to go into twrp.
It doesn't enter TWRP.
APPEARS a message that says INSTALLING SYSTEM UPDATES
And starts stock recovery.
Click to expand...
Click to collapse

broucker said:
Khanmodx said:
Yea just download twrp and latest su zip file. Now flash twrp via odin(make sure autoreboot in odin is unticked) hold buttons to go into twrp.
It doesn't enter TWRP.
APPEARS a message that says INSTALLING SYSTEM UPDATES
And starts stock recovery.
Click to expand...
Click to collapse
You need to flash the twrp through odin. That is the stock recovery that is like that
Sent from my SM-J500F using Tapatalk
Click to expand...
Click to collapse

Khanmodx said:
broucker said:
You need to flash the twrp through odin. That is the stock recovery that is like that
That's what I've done mate!
Sent from my SM-J500F using Tapatalk
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Did you untick autoreboot in odin ?
Sent from my SM-J500F using Tapatalk

Khanmodx said:
Did you untick autoreboot in odin ?
Sent from my SM-J500F using Tapatalk
Click to expand...
Click to collapse
yes. afterwards pulled out the battery and started the phone with volUP home and power.

Deleted

SOLVED!
used ganesh varma tutorial and cracked!
thank you!
PLEASE DELETE POST

broucker said:
SOLVED!
used ganesh varma tutorial and cracked!
thank you!
PLEASE DELETE POST
Click to expand...
Click to collapse
Could you please point me to that tutorial? trying also to root MY j5 MMB29M.J500FXXU1BPH1 ON 6.0.1 without any success till now...
Many thanks in advance!

Use search box! You'll find it in one of j5 subforums
Sent from my SM-J500F using Tapatalk

[ASK] G531H Flashing TWRP 3.0.0 Didn't work

Someones know what TWRP is working on my firmware? I try flashing version 3.0.0 with odin 3.11 but fail

You can see your TWRP version. In recovery mode not there

hrswhdn said:
Someones know what TWRP is working on my firmware? I try flashing version 3.0.0 with odin 3.11 but fail
Click to expand...
Click to collapse
go to setting > about device > press 10 times build number fast
then back to setting menu and go to developer setting's and do tick *unlock OEM ..* and do reboot
then try to flash again TWRP 3.0.2.0
this link for lasted TWRP
https://www.androidfilehost.com/?fid=385035244224403767
download and flash and press thanks key

اسماععیل said:
go to setting > about device > press 10 times build number fast
then back to setting menu and go to developer setting's and do tick *unlock OEM ..* and do reboot
then try to flash again TWRP 3.0.2.0
this link for lasted TWRP
https://www.androidfilehost.com/?fid=385035244224403767
download and flash and press thanks key
Click to expand...
Click to collapse
I change odin to 3.12 and redownload twrp, and sucess

Odin 3.12 + twrp 2.0.2 worked here
Enviado desde mi SM-G531H mediante Tapatalk