Database Users

[SOLVED] My Samsung Galaxy Y GT-S5360 won't start

Hello everybody
My friend has a Samsung Galaxy Y GT-S5360 and since yesterday it won't start. It shows "Samsung Galaxy Y young" and doesn't start. So I decided to try to root it and install Jellyblast v3 but it's the same problem. I followed a tutorial and tried to wipe cache and data but still the same problem. So now I read that the people who had the same problem as me, resolved their problem by flashing the stock rom with odin. But I saw that we needed some information like PDA, PHONE and CSC but I can't have these informations as the phone won't start So I am going to follow a tutorial to flash it with odin. But I'm worried about bricking definitely her phone :s So I want to know if there is no risk to brick her phone if I try to flash a stock rom without knowing these information (PDA PHONE CSC).
Thanks for your help and sorry for my bad english °° !!

please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck

-CALIBAN666- said:
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
Click to expand...
Click to collapse
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"

Maws59 said:
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Click to expand...
Click to collapse
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:

Hello
We managed to install a package but there are no french language in the one we installed. But we have these information now:
PDA: S5360DXKJ3
PHONE: S5360DXKJ1
CSC : S5360OLBKJ2
Could you tell me which package we must install to have the french language please ?
Thanks a lot for your help !!
EDIT : If you saw my last edit I did a mistake when telling informations x)
EDIT : Problem solved : http://forum.xda-developers.com/picture.php?albumid=8046&pictureid=28987

problem persists
TECHNO_THUNDER said:
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Click to expand...
Click to collapse
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device

aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
try install sgy drivers http://forum.xda-developers.com/showthread.php?t=2327476 .

aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
You should install SGY driver first

gts5360
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect

heart428 said:
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
Click to expand...
Click to collapse
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start

Samsung Galaxy wont Start and cant acces the System recovery
Hi ! my Samsung Galaxy y young GT-s5360 wont start after my friend tried to Upgrade it,
After i've tried to open my phone, its Stuck on the Logo "Samsung Galaxy Y young GT-S5360"
i've tried to wait of almost 10 minutes but my phone still Freeze,I've also tried to Access the Samsung Sytem recovery but it wont appear on my Screen
pls. Help me

pls. Help me
Click to expand...
Click to collapse
u phone got brick. please read previous post. u problem can be solved by use Odin.

You can flash stock rom without odin..but you need CWM

shyamSGY said:
You can flash stock rom without odin..but you need CWM
Click to expand...
Click to collapse
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference

marcussmith2626 said:
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
Click to expand...
Click to collapse
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup

shyamSGY said:
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
Click to expand...
Click to collapse
wouldnt work though if you changed your file system to ext to use cm7/9/cyanmobile/pa
you can only restore a nandroid backup fully if you restore it on the kernel on which it was made and you are on the same file system as it was made although you can advanced restore if on different kernel and should work if it can verify md5 sum

hemmm
marcussmith2626 said:
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Click to expand...
Click to collapse
what i should put at those pda,phone and csc ? sorry, i'm newbie

IsyrafSan said:
what i should put at those pda,phone and csc ? sorry, i'm newbie
Click to expand...
Click to collapse
Don't understand the question sorry
Like I said - download the firmware from my firmware thread & follow all the instructions
Pda goes in pda
Modem goes in phone
CSC goes in csc
Please follow all instructions on my firmware thread - links in signature

[Q] Flashing Clockwokmod on S4 I9505 won't work, any idea why not?

Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?

King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk

astraopcuser said:
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?

King Canute said:
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
Click to expand...
Click to collapse
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.

astraopcuser said:
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
Click to expand...
Click to collapse
Do I have to root the phone to make the clockworkmod work?

King Canute said:
Do I have to root the phone to make the clockworkmod work?
Click to expand...
Click to collapse
you must first root your phone.:good:
---------- Post added at 10:54 PM ---------- Previous post was at 10:36 PM ----------
astraopcuser said:
you must first root your phone.:good:
Click to expand...
Click to collapse
for the gti 9505 lte is a little bit diverent at this time.
first flash the cf autorootjflte.... via odin. phone in downloadmode, select pda,select cf autoroot jfte... hit start. phone reboots, you see an red/orange android droid then its rebooting
after that turn off your phone . phone in downloadmode, open odin, select pda, select cwm 6.0.3.2-4, hit start
Your phone is rooted with cwm.

What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.

Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
How rubbish..... its goes that way to get a custom cwm on the gti9505.
He ask cwm, not philz recovery.
You can say next time ....theres another way to get it work.
I only trying to help
Verstuurd van mijn GT-I9505 met Tapatalk

This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579

Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
I'm 100% sure that my phone is a 9505, it's the only version sold in Norway.

Mittaa said:
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Click to expand...
Click to collapse
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?

King Canute said:
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
Click to expand...
Click to collapse
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...

King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.

Mittaa said:
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
Click to expand...
Click to collapse
I'm using an Samsung retail cable from the S2, but I did try with the S4 retail cable aswell, but still no luck. The flashing goes ok in Odin, so I doubt the cable is the problem. And Kies isn't running in the background at all. Even changed USB port just to be sure testing all the options.
samersh72 said:
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Click to expand...
Click to collapse
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.

King Canute said:
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
Click to expand...
Click to collapse
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.

samersh72 said:
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
Click to expand...
Click to collapse
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.

King Canute said:
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
Click to expand...
Click to collapse
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!

samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
I was thinking about installing Cyanogenmod ROM or maybe later Google Android 4.3.
So now I need to root the phone.

samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
Triangle Away wan't work if you have custom kernel OR recovery !

Mittaa said:
Triangle Away wan't work if you have custom kernel OR recovery !
Click to expand...
Click to collapse
yes i know and he supposed to read or already red TA thread to know that

[Q]Can't install custom recovery on s4

Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.

TenshiSenpai said:
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
Click to expand...
Click to collapse
Can you please link the guide you have followed?
What black edition version do you have? I9500 or I9505, i understand there are 2 versions depending on region.
Is the bootloader unlocked?
What version Odin are you using?
Remember to reboot into recovery by holding volume up while turning power on after flashing.
Holding volume down gives you download mode.
Did you put the recovery package in the PDA tab?

I use odin 3.07 and used the guide of philz. I tryed with auto reboot and without auto reboot on odin, i put the tar.md5 file on pda without anything else. The only other option ticked was f.reset time.
Sent from my GT-I9505 using XDA Free mobile app

Bump

Noone knows anything? Please help, I can't do anything with the phone in this state. I can't install the official firmware nor the recovery too.

Uncheck auto-reboot in Odin.
if problem persists:
Different usb cable
Different usb port
Make sure Kies is not running in the background.

Already done all that stuff,
Any other suggestions?

TenshiSenpai said:
Already done all that stuff,
Any other suggestions?
Click to expand...
Click to collapse
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/

MAX 404 said:
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
Click to expand...
Click to collapse
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.

TenshiSenpai said:
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
Click to expand...
Click to collapse
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09

MAX 404 said:
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
Click to expand...
Click to collapse
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu

TenshiSenpai said:
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
Click to expand...
Click to collapse
Remember to release the 3 button combination after the samsung logo shows up

MAX 404 said:
Remember to release the 3 button combination after the samsung logo shows up
Click to expand...
Click to collapse
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?

TenshiSenpai said:
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
Click to expand...
Click to collapse
Glad is working
Yes you can make a nandroid , go to backup and restore choose your backup destination ( recommend external SD)

[Q] S4 Root Fail

I flashed official firmware(i was rooted) and i FDR and i left it unrooted for like a month and when i tried to root i cant..
When I try to root via CFautoroot it always fails(tried using my friends computer too)
if i try towelroot i get the message that my device is not supported....
maybe its the problem because i didnt install my country firmware
I have rooted my phone like 10 times in the past but now it wont...:crying::crying::crying:
help

ajdiinkoo said:
I flashed official firmware(i was rooted) and i FDR and i left it unrooted for like a month and when i tried to root i cant..
When I try to root via CFautoroot it always fails(tried using my friends computer too)
if i try towelroot i get the message that my device is not supported....
maybe its the problem because i didnt install my country firmware
I have rooted my phone like 10 times in the past but now it wont...:crying::crying::crying:
help
Click to expand...
Click to collapse
No problem bro
if you got a GT-i9505 you can download a custom recovery from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/
Than download Odin3.09, select AP and choose the md5.tar file
Start your phone to download mode and connect it to your pc, hit start on odin
go to your custom recovery and go to philz settings, than click reroot system.
install SuperSu from market

Tkkg1994 said:
No problem bro
if you got a GT-i9505 you can download a custom recovery from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/
Than download Odin3.09, select AP and choose the md5.tar file
Start your phone to download mode and connect it to your pc, hit start on odin
go to your custom recovery and go to philz settings, than click reroot system.
install SuperSu from market
Click to expand...
Click to collapse
I will try it out but will i be able to flash back official firmware???(since i cant root in odin) and i found something really suspicus... when i open kies wifi stops working and when i connect my phone to pc same thing... i have to reboot to make it work again..this started since i cant root...im downloading antivirus right now and i willl be using my friends computer to try install custom recovery
thanks man

Tkkg1994 said:
No problem bro
if you got a GT-i9505 you can download a custom recovery from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/
Than download Odin3.09, select AP and choose the md5.tar file
Start your phone to download mode and connect it to your pc, hit start on odin
go to your custom recovery and go to philz settings, than click reroot system.
install SuperSu from market
Click to expand...
Click to collapse
Looks like i had 5 trojan horses in my pc and that was the problem (wifi is still derpy...i am going to reinstall windows) thanks man i really appreciace
your help :fingers-crossed::fingers-crossed::fingers-crossed:

How to Root the SM-P600 P601 & P605 running 5.1.1 Stock Lollipop

Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire.
Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!

After installing CF Root, Superuser.apk is not installed and root access is available to every app without notification. No Superuser app is being installed. If I install 2.52 beta or 2.46 or the play store version, root becomes broken. Can't figure out why. System: DBT P605XXU1EOI5_P605DBTEOJ1_P605XXU1EOI5 and NEE P605XXU1EOI5_P605OXAEOI5_P605XXU1EOI5. Tried with fresh install, of course.

Pandur2000 said:
After installing CF Root, Superuser.apk is not installed and root access is available to every app without notification. No Superuser app is being installed. If I install 2.52 beta or 2.46 or the play store version, root becomes broken. Can't figure out why. System: DBT P605XXU1EOI5_P605DBTEOJ1_P605XXU1EOI5 and NEE P605XXU1EOI5_P605OXAEOI5_P605XXU1EOI5. Tried with fresh install, of course.
Click to expand...
Click to collapse
Try flashing the latest supersu.zip via custom recovery recovery

Extreme_Heat said:
Try flashing the latest supersu.zip via custom recovery recovery
Click to expand...
Click to collapse
Did that with 2.66 Beta - worked (for) now. Will report back if any further problems occur. Had to perform a data, Dalvik, cache, system wipe, reinstall stock, then CF root. Then it worked out, finally. Just deleting system / caches wasn't enough. Weird.

I still can not find where to download the stock firmware. All those sites either need premium or broken link. Anyone can help? stock firmware for P601. Thanks a lot in advance

sigelopisan said:
I still can not find where to download the stock firmware. All those sites either need premium or broken link. Anyone can help? stock firmware for P601. Thanks a lot in advance
Click to expand...
Click to collapse
OT: Try SamFirm.

Pandur2000 said:
OT: Try SamFirm.
Click to expand...
Click to collapse
Hi Pandur2000, thanks alot. In fact, I'm still figuring out how to use this tools. If its coming from Sammobile, I'm on my 6th attempt to download the firmware. All of them disconnect when I downloaded approx 1.2GB (total 1.4GB). Its frustrating but I have no other choice now :crying::crying::crying::crying:

sigelopisan said:
Hi Pandur2000, thanks alot. In fact, I'm still figuring out how to use this tools. If its coming from Sammobile, I'm on my 6th attempt to download the firmware. All of them disconnect when I downloaded approx 1.2GB (total 1.4GB). Its frustrating but I have no other choice now :crying::crying::crying::crying:
Click to expand...
Click to collapse
If you're downloading from Sammobile, my advice is to use a Download Manager. I'm currently using Download Accelerator Plus, which not only allows to Pause/Resume downloads from SamMobile (it will ask you for your login credentials to SamMobile when you start de download), but it will also try to connect to multiple servers to download the files faster. I'm currently downloading the firmware for my Galaxy Note 2014 LTE from their servers at 1,5MB/s after having needed to reboot my PC
Hope it helps
P.S. I'm assuming you're using Windows, but if you're using another OS google for download managers for your OS and I'm certain you'll find something that'll help you
---------- Post added at 11:57 AM ---------- Previous post was at 11:55 AM ----------
Extreme_Heat said:
Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire. Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
Click to expand...
Click to collapse
First time didn't let the pass message appear on Odin before disconnecting the cable (my bad - been doing this for so long that sometimes overlook some steps xD) and the SuperSU app wasn't installed.
After factory resetting the device and redoing the process a second time (paying attention to what was doing xD) it worked like a charm!
Thanks man ;D

I rooted my SM-P605 with latest CF-AutoRoot 5.1.1 but I can see something wrong.
SuperSu app is correctly installed and working (I'm using Seeder and tried Xposed) but:
- cannot give root permission to Clean Master (every time I try it fails)
- each time I reboot TWRP it asks me to install SuperSu.
Inviato dal mio SM-N9005 utilizzando Tapatalk

No luck
Note 2014 5.1.1 vzw cant seem to get this to work 8(

Thanks, worked perfectly for me using a P605.

?
StreetGuru said:
Thanks, worked perfectly for me using a P605.
Click to expand...
Click to collapse
Was it a Verizon tablet my odin keeps saying fail when I try to flash anything

StreetGuru said:
Thanks, worked perfectly for me using a P605.
Click to expand...
Click to collapse
It works (I've got a P605) but while I had been rooting it stuck on the Samsung logo so I had to download and install the stock firmware again and repeat the process of granting administrator rights.

Open up su and tells me it cannot find su binary, uninstalled it from play store and open again and same issie.

I have a refurbished LTE version from Tmobile. Will this work with my model P607t? I have read that the P605 model is almost the same as the P607T. Also heard root breaks S Pen functionality.

Extreme_Heat said:
Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire. Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
Click to expand...
Click to collapse
Worked flawlessly, except that on my first try there is no SuperSU app so I repeated the process again. Worked.
Thanks!

Am I reading correctly that this does not work on Verizon's version? SM-P605v is the official model.

worked fine on p601 but stuck with twrp
i followed all the steps and rooted fine on p601...but when i tried to install twrp recovery it is installing and saying pass on odin but when tried to open twrp it is getting bootloop with "recovery is not seandroid enforcing" i tried autoroot again ...so please tell me how to install twrp

Extreme_Heat said:
Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire. Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file If I root
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
Click to expand...
Click to collapse
Could you please let me know if rooting my tablet would void the warrantee or trip the Knox counter? Thank you.

Kingsman1 said:
Could you please let me know if rooting my tablet would void the warrantee or trip the Knox counter? Thank you.
Click to expand...
Click to collapse
yes it does. to both.