G900P Deleted DCIM Recovery - Galaxy S 5 Q&A, Help & Troubleshooting

Hi,
I accidentally deleted about ~7 months of pictures/videos from my phone. I have spent about a week trying to recover them, and am pretty confident my specific questions have not been posted previously (or if they have, they are still unresolved), or I would have found them by now. But I could be wrong! I apologize, please point me to any relevant threads if that is the case. I tried to do my due diligence in reading about forum rules and whatnot as well, but I am so exhausted from the past week of ~interneting~ that I could have missed something. Please correct me!
Anyways, I am pretty confident I was able to image the mmcbkl0 thing using ADB (using this). When I run the .raw file through testdisk I get two partitions that show up as Mac HFS that could not be recovered. I have no idea what is going on there. Photorec finds a bunch of stuff but none of my deleted images. Also, the files it does find I am completely unable to open. I've looked into figuring out how to mount the drive in Ubuntu (running 12.04) but I get rather confused.
I also brought my .raw file over to Windows and tried to use this guide (from xda), but I could only mount the drive with NTFS or FAT32 and I am pretty sure it's supposed to be ext4. Regardless, the Recuva program gets hung on ~analyzing files 20 of 30~ or whatever. I let it run overnight and the "time remaining" estimation just kept going up so I killed it.
I also tried everything on just the userdata partition (mmcblk0p26), but it's unclear if the DCIM data is even on that partition. I get similar unrecovered partitions in testdisk. I tried to follow this guide to figure out where my DCIM was, but I am not familiar enough with terminal commands or adb to figure it out.
I am sure you will need a more specific information in order to help me, but I have consumed so much information on android and linux over the past week that I no longer am sure what is relevant. Please ask and I will answer! My phone is currently off, and when I turn it on to hook it up to the computer it's in airplane mode. I had to download busybox to root it, but other than that not much of the data should have been overwritten.
So, if anyone knows how I might troubleshoot the testdisk stuff (my geometries are wrong maybe?), or knows of other disk analyzing software, or how I could mount the .raw file in Ubuntu to further analyze it, or know anything else about where the internal DCIM memory might be, or just have any suggestions they would all be greatly appreciated!
Thanks!

You could try data recovery for android app to get data back. Good luck.

alexclairegreat said:
You could try jihosoft.com/android/android-phone-recovery.html data recovery for android app to get data back. Good luck.
Click to expand...
Click to collapse
I can't find any reliable-looking reviews of this software online. Does anyone know if it's legitimate?

Related

Safely Removing G1 in ubuntu...

Hi, i searched and couldnt find anything... I just installed ubuntu and have been dual-booting with windows Vista for several weeks now. My question is im a windows (redheaded step)child and im not too familiar with linux' inner workings yet...so i have not been doing anything to "safely remove" my G1 when in ubuntu, cuz i thought that such an option doesnt exist...problem is now i think ive corrupted all my data on my SDcard and i was just hoping that someone could tell me how to do this correctly in ubuntu? Do i hafta mount it, and THEN unmount it before i should unplug it? I dont even know if this is the problem, but ive been watching my logcat and it gives me some Dbus error when i plug in USB and it doesnt come up on the phone with option to mount SDcard, and windows doesnt recognize my device anymore. Pretty sure i corrupted my SD, im pretty sure i can fix it without help, if someone could just tell me the proper procedure for removing devices from ubuntu? thanks in advance...
-BMFC
I dual boot ubuntu on my mac OSX, which emulator are you using (fusion VM, virtualbox etc...?)
(1) When you've properly mounted your SD card it should show up on your ubuntu Desktop. Just go to Places > Desktop and you should be able to eject the SD card (two if you are partitioning them and AppstoSD) by pressing the "eject" button. The SD card should show up in the left window pane.
(2) Also, you probably have corrupted your SD card and are going to have to reformat it, losing all of your data.
(3) Somewhere in your emulator there should be a USB button to see which devices are plugged into your host computer, and which ever one you select your emulator will read.
(4) Finally, you don't provide enough information for a real answer...
(a) What ubuntu are you running?
(b) Do you have appstosd?
(c) have you done a nandroid backup?
(d) Which emulator/virtual environment are you running?
Hope this helps.
In Nautilus (the file manager) there will be a little orange eject symbol next to the drive. Clicking it will unmount the drive, which you should ALWAYS do before pulling any kind of removable media out of the socket. Unmounting is the *nix equivalent of "ejecting" in Windows.
If you're running a command line setup, the command to unmount is
Code:
sudo umount /media/(insert mount name here)
Hope that helps!
I too dual boot and noticed they i wouldn't get the "usb connected" on the G1. After some tweaking a few options; i noticed I would get the USB connected IF my usb debugging was ON. [settings- applications- developement- usb debugging]. I have to check for Ubuntu and uncheck for windows. I hope that helps
you see the problem is that ive never actually mounted my G1 in ubuntu, i just plugged it in to charge...so i never had to unmount it and theres no "safely remove" function, that i could find, so i figured that linux was just secure enough that it didnt require safely removing devices....oops...in answer to your questions, first im not running any VM...im ACTUALLY dual-booting. i have windows vista and ubuntu Jaunty running side-by-side, on a compaq presario f700. I DO have USB debugging ENABLED, and right now im running JF1.42rc33 still, im prolly gonna be wiping and upgrading to SOMETHING today, i was kinda just holding off cuz i like my theme, but my phones f-in up so nows as good a time as any to start fresh. I dont use a2sd, just my caches for market, browser, and maps are on sd. Ive been having trouble on my g/f's hp Pavilion pc running windows vista...we both have g1's and HERS is stock, unrooted, and she just got the OTA a couple days ago, since then the computer has been hating on MY phone, it says the drivers screwed and it wount bring up the option on my phone to mount the sdcard. hers still works fine, and mine still works fine hooked up to my laptop, just not hers...so i dunno if THATS a cupcake issue or if its cuz i didnt remove it from ubuntu right...im gonna format my sd AND wipe my phone, and ill get back to you guys moentarily, thanks for all your replies.
-BMFC
If all you were doing is charging, and you didn't mount it, then your original assumption was correct. You don't need to unmount something that was never mounted.
mm0
ok well then somebody help me out with this: i have tried for two days to get my sdcard to format, and IT JUST WONT. I cant get it to even be recognized by my girlfriends computer, but her G1 running UNrooted TMOCupcake still works fine, kinda makes me wonder if hers didnt get some kinda updated driver packed with it? The cupcake, i mean, not the phone...i dunno. Anyways my phone WONT mount in ubuntu at all, it shows up but when i try to mount it it says "No media on Volume" and wont open it at all. so in windows it ACTS like its doin everything i want it to do...i tried to format my sd yesterday and i sat here and watched it the whole time, and when it finshed it said: "Format Completed SUCCESSFULLY." so i SAFELY REMOVED IT, unplugged and plugged back the usb, and when it came up EVERYTHING WAS STILL THERE!!!! my problem seems to be my sdcard/doom folder...it tells me that the folder \doom is ENTIRELY UNREADABLE.
ahem...on a side note, all these things happened at once...(same day)
1. My g/f got the OTA cupcake update...
2. I updated some apps from the market, the one that im suspecting right now is called "Cards(-)" by Coderminus. After i updated it, i went to play Doom, and instead of playing like usual, when i hit the "Play" button, it just exitted to home. So i checked my logcat and the Cards(-) app caused ALL KINDS of runtime errors, and so i uninstalled this app.
3. My market starts crashing all of a sudden. I cleared the cache and it SEEMED to fix it...for now.
4. Uninstalled Doom (ver. 1.29.666) and then went and deleted my doom folder.(I thought) Reinstalled newest version of Doom (ver. 1.31.666)
5. Tried to redownload the WADs to play, and i could get it to play, as long as i didnt try to download the sound files. Everytime i tried to get the sounds, it would act fine, but then when id go to play the game itd just exit to home again....
6. Repeated step 5. like 6 times....
This was all like 2 days ago? 3 days ago? and ive been messing with it ever since, and my PHONE is fine, but my SDCARD appears to be, for lack of a better term, ****ED. i cant even format it, ive tride 3 times, it just all comes right back when i plug it back in...i even tried to put an update.zip in my sdcard and update from JF1.42RC33 to (I was gonna try Dude's 1.2b) so i put that in there, and removed it and when i went into my file manager on the g1, the update wasnt there! i cannot seem to be able to make ANY changes to my sd...SOMEONE PLEASE HELP ME!!!
-BMFC
Try ti format your card from within your phone. Unfortunately that's the only issue I can help you with.
Edit: try doing a system wipe on your girlfriends phone from the recovery menu. It should solve the crashes. You will wave to reinstall all your apps tho.
ubernicholi said:
Try ti format your card from within your phone. Unfortunately that's the only issue I can help you with.
Edit: try doing a system wipe on your girlfriends phone from the recovery menu. It should solve the crashes. You will wave to reinstall all your apps tho.
Click to expand...
Click to collapse
I...didnt even know that was possible...im not seein any options to do that...you know some terminal commands for that or somethin? Cus when i got into my file manager (i use aFile, cuz it has wireless transfer) i cant even delete anything from there, ANY folder i try to delete it just says "Failed to delete (folder name)"...so if you know how to do that then hook me up and ill try it...
-BMFC
EDIT: i think you misunderstood, THERE'S NOTHING WRONG with my girlfriends phone...its just that she got the US OTA and it happened at the same time as all this other, so i thought maybe it might have had some effect on how mine interfaces with her comp...honestly i doubt it, but until someone tells me im wrong im not ruling it out...
On your phone Goto your settings menu, sdcard and phone memory, unmount your card and then select format
No dice, seems you may be on a diff. ROM than me, i dont have that option, i unmount the card, and thats all that happens, it unmounts it...no format option...
-BMFC
Damn that sucks. Does your girls phone have that option? I wish I could help you out. But I'm at a loss
Sdcard IMPOSSIBLE TO FORMAT....need ADVANCED help!!!
hi i posted a thread here for help, and i did so cuz i need help from someone INTELLIGENT. The mods have now moved my post to the "General section" of the dream forum, where i cant get **** for help. The reason i didnt just post in that section, where it goes, is CUZ NO ONE CAN OR WILL HELP ME OVER THERE....i need a devs help or somethin...THATS why i posted in the dev section...cus its pointless to try to get support from end users...i might as well just sit in the bedroom with NO COMPUTER asking MYSELF what the answer is...so first off id like to thank the AWESOME mods here for burying my post head-high in a section that i cant get any support in, EVER. THEN, id like to ask some dev(s) or SOMEBODY, SOMEBODY INTELLIGENT, please go to
this thread
and read, and im BEGGING you for help!!! To whoever helps me figure this out i would gladly donate to WHATEVER cause you have!!!! Honestly, if you ONLY read MY posts, you wont miss anything important, except some guy with the SAME SKILL LEVEL AS ME telling me to wipe SOMEBODY ELSES PHONE and see if that works...****.
SOMEONE PLEASE try to help me out before the AWESOME mods here at xda move this post, too. Im not sorry im posting in the wrong secrtion cuz this is where the help is and thats REALLY what i need right now. So MODS, you can move my posts all day long, ill just make a new one linking to the old one till i get some support...suspend me...BAN me, i dont care, ill just keep coming back with new usernames and accounts until i get some help, cuz THATS WHAT THE F*CK SUPPORT FORUMS ARE FOR. Im really pissed at whatever mod moved my post, cuz the SECOND i posted that thread initially, i got like 4 or 5 replies, thats why i LOVE this forum, cuz it has GREAT SUPPORT, when you can actually get your question seen by a dev, that is. but as soon as my post got moved i got several replies from one DUMBASS that was TRYING to help, and ill give him that he was just tryin to help, but i have a problem with my phone, and this guy tells me i should WIPE MY GIRLFRIENDS PHONE. WOW. Just wow. Someone please go read my problem and post there, or post here, with some answers....MODS PLEASE DONT MOVE THIS THREAD I AM TRYING TO GET SOME HELP!!!!
-BMFC
yea *****ing like a 4 year old will you nowhere. no one owes you anything.
If you have a camera, try using that to format your memory card. Hope it works.
lol ok first off take it easy on the mods here, i'm speaking of your other post, they try to keep these forums clean and it isnt an easy job all things considered.
the way i see it you have 2 options.
1. Throw your card in a digital camera and use the camera to format it. I works most the time when a computer wont, several times my pc wouldn't recognize/format a card but my ****ty digital camera had no problem.
2. if that doesn't work, splurge the $8.99(or less) it costs to get a new sd.
I've even seen 8gig class 6 cards for around $20 and 4gig class 4 cards for $10.
edit: wow just a min too late

[Q] Re-sizing Partitions

I use my Nook Touch for reading only. I do not need it to access the internet or download apps. From my understanding, these are the main reasons to root one's Nook.
What I am interested in is gaining access to that 1.5 GB or so of internal memory. As the majority of my books are side loaded, it makes much more sense to have 1.5 GB available to me and only 240 MB for B&N downloadable content.
My first question is, if I am going to try to re-size some partitions and I have no interest in apps, which rooter is the simplest for v1.1? SalsichaNooter or TouchNooter?
And finally, I have searched the forum and there are a couple of threads about re-sizing partitions, but they all involve linux terminal work. I think I might be able to figure it out, but could a linux disk partition program (like gparted) be used instead?
Ok, I found a thread posted by ros87 here that details how to go about resizing the partitions. It was very helpful, however, after rebooting back into my Nook, I am no longer able to connect to the internet.
I am not sure if either the sdb6, sdb7, or sdb8 partitions have any connection to wireless internet, but I noticed during the step of:
#mount /dev/sdb8 tmpdata
Click to expand...
Click to collapse
I got some socket warnings relating to a wireless file. ros87 says to ignore the socket warnings, which I did. Then at this step:
#tar xf tmpdata.tar tmpdata
Click to expand...
Click to collapse
I got a whole bunch of errors about unable to write files. But when I checked the drive, it seemed that all the folders copied over okay, so I continued on through the steps.
I probably should have copied the error output, but after discovering that wireless isn't working (it says "Unable to Connect"), I'm thinking maybe something didn't copy over correctly.
Should I try deleting and copying over the tmpdata.tar again?
Go trough dmesg and logcat (in adb shell) to see if you can find any troubles about your wifi connectivity, then post it here, but not the complete logs please!
As for my posted setup, I ran it for several weeks, with wifi enabled, without any troubles at all.
The socket errors is not the problem. A socket cannot be copied, and it is recreated whenever the socket service is started.
-R
Can I use adb if my Nook isn't rooted? As in, would I be fine just using noogie? I won't be able to try this until I get home.
Edit: Found this. I'm not interested in apps and such, so this seems the best option for me. Will post the dmesg and logcat later.
Okay, so I restored my backup image and checked the wi-fi. That is coming up as "Unsuccessfull", too. So maybe the problem is my wifi setup? My ipod connects fine, so I'm not sure what the problem is.
Just for future knowledge, is it safe to erase and de-register the device with different sized partitions?

[Problems & Questions] With Official 2.3 Update V2

Hello !
I am feeling really down today after been trying to get my phone working again.
There is a huge problem currently, I am really annoyed that it doesn't work at all.
First thing, my phone won't start after update it just boot loops and never seem to end it.
First thing I noticed /boot, /cache /system and most things are gone, I can load up recovery but nothing more. I have no idea what happened but the whole image folder was wiped and I had to myself put in the CWM recovery.
I can't do an upgrade "again" as it will be stuck @ the unpacking part without starting it at all.
I been trying with 2.3 V2 and with B133(My stock rom I got).
If anyone has a solution that can solve this problem please help out if you could. Also if you are about to tell me get this and that, please most cases I haven't seen any of the Firmware roms in @modaco wiki links work. Means I can't download them, so if you happen to have spare copy please upload it and link it to me. I have been googling and looking through this section twice, nothing really worked out.
Thanks in advance !
If you didn't erase the .cust_backup partition which contain the image folder with all system' s .img files, then maybe it' s damaged. I had some problems with this partition before and when I checked it with windows check disk it repairs it and I had no problems from then. So, try this, and if you still haven' t any file on image folder, you can find the original folder on X5' s forums. Is definately here, but I don't remember where is the link and I don't gonna search it for you. If you cannot find it, you can allways reflash the original rom. If you fix the partition(if this is the problem), I don't think that you'll have problems with update any more.
dancer_69 said:
If you didn't erase the .cust_backup partition which contain the image folder with all system' s .img files, then maybe it' s damaged. I had some problems with this partition before and when I checked it with windows check disk it repairs it and I had no problems from then. So, try this, and if you still haven' t any file on image folder, you can find the original folder on X5' s forums. Is definately here, but I don't remember where is the link and I don't gonna search it for you. If you cannot find it, you can allways reflash the original rom. If you fix the partition(if this is the problem), I don't think that you'll have problems with update any more.
Click to expand...
Click to collapse
Hello, thanks for the reply.
I have no idea about this .cust_backup partition and how I am supposedly to access it via windows. Also the thing you said about fixing partition within Windows, the check disk thing. I am not sure about that part either as I can load CWM and it can read the partitions but they are empty. Also there is nothing in this forums that contains original things, only way for me to fix this if someone have extra copy and can guide me on how and where to place the all needed files. I am pretty sure it's only things that are missing and I can't get a grip out of this.
So to sum up what my problem is.
I did an upgrade from 2.2 to 2.3 with official firmware, it worked out normally but after a reboot my phone became stuck in an endless loop, I can't do anything and it will not I repeat it will not allow me to "re flash" any firmware I tried so far, the 2.3 V2 and B133.
I am begging someone in this forum section, please if you have the knowledge about this problem care to help?
I can't get a refund out the phone warrenty is off and I do not have that much spare money.
Thanks in advance !
If you can get to recovery, wipe cache and data. It should be possible in stock recovery.
The cust partition has all the images for bootloader, recovery etc. You can get to it with the pink screen. Reformatting and then reinserting the images and files could help, but try that when nothing else works.
I can't give you good help via phone, but try wiping data first. Also, try if you can use some other sd card.
Sent from my U8800 using Tapatalk
Blefish said:
If you can get to recovery, wipe cache and data. It should be possible in stock recovery.
The cust partition has all the images for bootloader, recovery etc. You can get to it with the pink screen. Reformatting and then reinserting the images and files could help, but try that when nothing else works.
I can't give you good help via phone, but try wiping data first. Also, try if you can use some other sd card.
Sent from my U8800 using Tapatalk
Click to expand...
Click to collapse
The most common things I have already done, but do enlighten me what this "custom" parition is. Because in windows I do not see such partition I see a removable partition which I have now added a folder called image with these containing files.
http://forum.xda-developers.com/showthread.php?t=1370960
EDIT ** Also regarding to first person who said about Windows partition manager. The thing is I see a lot of partitions and there is no labeling for them, might be because they are ext2/3 or even something else? In anycase I can't do so much I just find it really odd I have many duplicates and I am guessing that must be errors... Because I am seeing the main recovery partition which has no label too... its at 240 MB where 135MB is used. Lastly there is my internal SD card empty and healthy still I can't reach it within Windows if I do not mount it...And can't now without going into the android OS. I Have loads of free space "partitions I don't understand why they are there".
**
Thanks for helping out, it feels not good to have a half dead phone, it's still not solved :'-(
The .cust_backup is the mount point on android for this removable partition with image folder. In windows haven' t this name. I didn't mean to use the windows partition manager, just to use windows explorer, right click on the partition and choose properties, then tools and then check disk. Of course you can use partition manager too, but because as you found there are all no labeled other partitions there and is a bit confused.
As you mentioned, you found the original image folder and you replaced the files. Did you tried to do the update again after that?
Also you can see and the internal sd partiton, but you need linux system. This partition is not fat32, so windows cannot see it.
dancer_69 said:
The .cust_backup is the mount point on android for this removable partition with image folder. In windows haven' t this name. I didn't mean to use the windows partition manager, just to use windows explorer, right click on the partition and choose properties, then tools and then check disk. Of course you can use partition manager too, but because as you found there are all no labeled other partitions there and is a bit confused.
As you mentioned, you found the original image folder and you replaced the files. Did you tried to do the update again after that?
Also you can see and the internal sd partiton, but you need linux system. This partition is not fat32, so windows cannot see it.
Click to expand...
Click to collapse
I have placed all things that I got from here.
http://forum.xda-developers.com/showthread.php?t=1370960
And I can't run the upgrade firmware, it gets stuck at first stage which is to unpack the the update.app thing.
It just stays like that not blinking and frozen.
Did you tried now that you have the original files, to go to recovery mode and wipe data etc?
Also when you try to do the upgrade do you have the device connected with the cable?
I had this problem once and I think that when I disconnected the cable(or maybe wasn' t connected and I connected it, I don't remember well), the proccess bar starts to moving after a while and the upgrade completed successfully.
dancer_69 said:
Did you tried now that you have the original files, to go to recovery mode and wipe data etc?
Also when you try to do the upgrade do you have the device connected with the cable?
I had this problem once and I think that when I disconnected the cable(or maybe wasn' t connected and I connected it, I don't remember well), the proccess bar starts to moving after a while and the upgrade completed successfully.
Click to expand...
Click to collapse
You are not understanding me :-(, I have wiped already millions of times in millions of different ways just to get it work. And no, I don't have the device connrected when I upgrade, it won't work properly then, I have tried to wait for the progress bar to "start" move it won't happen the battery will die, and nothing happened.
I can't go in with normal Recovery mode, can only go in with CWM, the normal recovery mode is really small, I mean only 3mb, while the froyo version is 5mb. Now I am asking if you have the time to upload the image files from 2.3 V2, the ones in forums are for V1. Which I don't know might conflict.
Thanks again for trying to help me out, this is really frustrating to get it to work.
**EDIT**
I worked it out !
I think I understood what you meant, I did as you told I started first with pluggin in the charger forced it to upgrade and now it's upgrading, thank you so much dancer_69. I was going to go tomorrow to buy a new 2nd hand smartphone. But now I can save my money for other things !
**EDIT of EDIT **
I seem to have downgraded to B133, I will try now with B158 2.3 V2 again and hopefully it will work now.
Yes, wasn't clear because I don' t remember what I've done and solve it. But I think that I did it like you discribed too.
Anyway I'm glad that was helpful(kind of)..
And don' t give up so soon with smartphone' s bricks, I've faced brick kind of problems many times and if the device it' s not completely dead, there is something you can do. Maybe need more search or many tries(sometimes the same things) but at the end(and of course If there isn't a hardware problem) device can unbrick.

[NEED HELP with e2fsck] Soft-Brick : corrupted /data/ & /sdcard/ partitions

----------- FIXED ----------
Hey guys,
I'm encountering a terrible problem with my P6810 tab. Here is the story :
At first, I just did format /system/ (and /data/, cache and dalvik) in CWM before flashing a new Rom.
After reboot, the tab just got stuck on the "Galaxy Tab 7.7" logo. no bootloop, just stuck on static logo.
At this stage i could go to download mode and recovery, which I did.
I tried to reflash the rom, no success so then i tried to flash stock ICS firmware through Odin 1.85 : Stuck on flashing Factoryfs.img for several hours, so i had no choice but to reboot the tab. (i had no kies-related software running, neither my antivirus)
There, the tab got stuck on the "Firmware upgrade encountered an issue. please select recovery in Kies" screen, no way to go to either recovery or download mode (not even worth saying Kies didn't recognize the tab).
I've been struggling a few hours with that brick and finally managed to get acces to download and recovery modes again by flashing CWM with Odin alongside a PIT file with "repartition" ticked in Odin.
So there I could access recovery, I flashed CM9, everything went smooth. The tab rebooted and got passed the Galaxy tab 7.7 logo and went to the cm9 bootscreen but got stuck there (big desillusion right there).
So now in recovery, i can mount every partition but those two : /data/ and /sdcard/
I figured out by reading similar threads that the solution to my issue might be e2fsck through adb. I'm a complete noob to adb.
I can acces the adb shell but here are what the commands i've been reading about return me : (mmcblk0p9 is /data/ partition on P6810)
# e2fsck -fDC0 /dev/block/mmcblk0p9 :
e2fsck : Superblock invalid, trying backup blocks...
The superblock could not be read or does not describe as a correct ext2 filesystem.
If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else),
then the superblock is corrupt and you might try running e2fsck with an alternate superblock : e2fsck -b 8193 <device>
also had this once with this command :
bad magic number in superblock while trying to open /dev/block/mmcblk0p9
# e2fsck -b 8193 /dev/block/mmcblk0p9 :
Attempt to read block from filesystem resulted in short read while trying to open /dev/block/mmcblk0p9
Could this be a zero-length partition ?
# e2fsck -c /dev/block/mmcblk0p9 :
same as above
can you guide me with e2fsck or give me a link to a specific tutorial related to android e2fsck?
is there not a way in adb to like replace the corrupt partitions with freshly created ones ? or any other workaround ?
Any help will be appreciated a lot, i'm willing to donate to whoever provides me with a solution to get my tab running again.
Thanks for reading.
check this thread, very informative, helped me before
http://forum.xda-developers.com/showthread.php?t=1625675&highlight=bootscreen
Thanks a lot, already checked that one though.
Everything that worked for the guys in that thread doesn't work for me, or I'm too ignorant to find out the right e2fsck command...
Still no one able to provide some help please ?
It's weird that so many people are having the same issue on 7.7 these days, could it be related to the EU ban of this tab ?^^
Anyway, last day before i send it to Samsung
check this thread here it may help you solve your issue. All problems are coming from a brick bug in the ICS Kernel thats trigerred by wiping.
Thanks a lot, trying this right now
Can someone please post a (parted) print of a safe and working Galaxy Tab 7.7 (either of the two models) ?
I need the exact size of the /data partition
ISSUE FIXED Thanks to Zorbakun's last post. A million thanks dude.
However, the actual internal storage of my tab is now 50mb :silly: anyway i'll find a way to fix that too.
the actual internal storage of my tab is now 50mb
Hello Androguide.fr.
Did you manage to find a way to fix your shrink of internal storage? If so, would you mind to share the method. Thanks
Regards
Budi
cakrabayu said:
Hello Androguide.fr.
Did you manage to find a way to fix your shrink of internal storage? If so, would you mind to share the method. Thanks
Regards
Budi
Click to expand...
Click to collapse
Well yeah, didn't recover the 16gb but you can try to earn yourself some extra gigs by doing this once you created a fresh /data partiton :
this is an example for p6810, replace resize 9 with resize 10 if on a p6800
Code:
adb shell
parted /dev/block/mmcblk0
print
resize 9
It will ask you for start/end values, keep the same start value otherwise it will give you an error. A good idea is to resize the partition like + 500mb at a time, to avoid i/o errors you might get when creating/resizing large file systems.
Hope it helps, good luck.
I am about to have to do this myself, and i'm not a developer. i have accessed and navigated around my device through adb, but this level of complexity *almost* over my head. i just want to make sure i'm not going to permanently mess this up. also, someone in another thread tried flashing ICS with an older version of ODIN and now his tab won't even power on. which i'm trying to avoid... so after reading around these forums for a few days (it happened saturday morning--and i KNEW to avoid flashing from stock ICS recovery--i think i wiped /data-cache-dalvik with CWM 5.0.1) i'm pretty sure that failure to mount /data seems to be the super brick bug everybody's talking about. i bought the p6800 as an import in the US so i am without warranty... if anyone can help with a step by step guide for the masses or something... i'm intelligent, and quite computer literate/net saavy, but i'm not a mentat ("dune" reference)...
like, i'm having trouble figuring out how to install adb on windows. and how do i use parted when it's linux software? i've repartitioned HD's before, and i'm familiar with some command-line basics, but....
--going to bed now...my head hurts--
aletheus said:
I am about to have to do this myself, and i'm not a developer. i have accessed and navigated around my device through adb, but this level of complexity *almost* over my head. i just want to make sure i'm not going to permanently mess this up. also, someone in another thread tried flashing ICS with an older version of ODIN and now his tab won't even power on. which i'm trying to avoid... so after reading around these forums for a few days (it happened saturday morning--and i KNEW to avoid flashing from stock ICS recovery--i think i wiped /data-cache-dalvik with CWM 5.0.1) i'm pretty sure that failure to mount /data seems to be the super brick bug everybody's talking about. i bought the p6800 as an import in the US so i am without warranty... if anyone can help with a step by step guide for the masses or something... i'm intelligent, and quite computer literate/net saavy, but i'm not a mentat ("dune" reference)...
like, i'm having trouble figuring out how to install adb on windows. and how do i use parted when it's linux software? i've repartitioned HD's before, and i'm familiar with some command-line basics, but....
--going to bed now...my head hurts--
Click to expand...
Click to collapse
Try the .PIT file for the P6800 located here. You will lose all data, and part of your internal SD space. Looks like the brick happens consistently at the same point of the memory chip, so the same .PIT works for most people. If that doesn't help, you will need parted.
How can you use parted? It's a Linux program that runs in your tablet. You will adb shell to it, then you will have a Linux shell. Everything you put down there will run in your tablet, as if you were typing on it (think ssh, or remote desktop). I can't help you much more, because (knocks on wood) my tablet is still very much alive, and I don't use ADB that much.
Now, I don't know how it works in your country, but here in Brazil the Samsung service accepts warranties issued anywhere. It may be worth a shot.
aletheus said:
I am about to have to do this myself, and i'm not a developer. i have accessed and navigated around my device through adb, but this level of complexity *almost* over my head. i just want to make sure i'm not going to permanently mess this up. also, someone in another thread tried flashing ICS with an older version of ODIN and now his tab won't even power on. which i'm trying to avoid... so after reading around these forums for a few days (it happened saturday morning--and i KNEW to avoid flashing from stock ICS recovery--i think i wiped /data-cache-dalvik with CWM 5.0.1) i'm pretty sure that failure to mount /data seems to be the super brick bug everybody's talking about. i bought the p6800 as an import in the US so i am without warranty... if anyone can help with a step by step guide for the masses or something... i'm intelligent, and quite computer literate/net saavy, but i'm not a mentat ("dune" reference)...
like, i'm having trouble figuring out how to install adb on windows. and how do i use parted when it's linux software? i've repartitioned HD's before, and i'm familiar with some command-line basics, but....
--going to bed now...my head hurts--
Click to expand...
Click to collapse
I am working on writing a specific 7.7 guide to teach people the parted/e2fsck technique I use to revive my bricked p6810 everytime I want to flash a new rom or test my builds.
First, as pointed out, try to Odin the PIT file for your particular model (eg : P6800 16gb).
You got to know that the parted technique is a pain in the ass, that you'll have to do it quite often if you like flashing roms, and that your tab will have a much smaller internal storage.
I think the guide will be ready in a couple days but you can pm be if you need help before that, no problem.
Good luck with this superbrick curse
thanks guys for your help, i'm going to try to figure this out this afternoon. i'm in the US, so they don't even offer warranties on imports. i was told by a samsung rep in the US that they don't grant warranties to imported models. i will first try the modified PIT file, then i will try the more complex method. @Androguide.fr i will PM you if i have trouble with the more complicated method later. thanks!!!!
aletheus said:
thanks guys for your help, i'm going to try to figure this out this afternoon. i'm in the US, so they don't even offer warranties on imports. i was told by a samsung rep in the US that they don't grant warranties to imported models. i will first try the modified PIT file, then i will try the more complex method. @Androguide.fr i will PM you if i have trouble with the more complicated method later. thanks!!!!
Click to expand...
Click to collapse
I just finished writing the guide, it's here : forum.xda-developers.com/showthread.php?t=1862294

[Q] Undelete files/photos on GT-I9500 without root

My friend has accidentally deleted all photos of her little baby, which all photos in the internal memory and the phone is without root as yet.
I have tried to help her but seems cannot figure out the proper way to do so.
Is there any help / guide can be shared to me/us so as to recover those photos?
Appreciate if any help can be provided, thanks a lot~!:fingers-crossed:
ng_tim said:
My friend has accidentally deleted all photos of her little baby, which all photos in the internal memory and the phone is without root as yet.
I have tried to help her but seems cannot figure out the proper way to do so.
Is there any help / guide can be shared to me/us so as to recover those photos?
Appreciate if any help can be provided, thanks a lot~!:fingers-crossed:
Click to expand...
Click to collapse
You might search for the key word photo recovery in google play store. However, upon installing such application some of the storage sectors on the internal memory might be overwritten (depends on how full the the internal storage space is).
In case you do not want to do that and have a computer available you can search for the tool photorec (freeware). It's available for various operating systems.
For M$ you need to install the proper usb drivers for the phone (description elsewhere in this forum) and when the phone is recognized you start photorec by following the hints displayed by the program.
For a linux distribution you need the proper adb bridge and some knowledge on how to mount the phones internal memory as a drive and try photorec. As far as I remember some older versions of Android had a recover utility installed that could be used by executing it thru the adb shell.
For Mac I do not know because I don't own one.
Yes, it is possible. see this samsung galaxy data recovery solution which is easy to follow and helped me before.

Categories

Resources