hi there ...
can i chang region of the mobile so i can recieve updates quickly ? iam plk l01 c185(b120) and want it to change to c432 eu instead>>
i noticed debranding option in honor 7 multi tool but i did not understand how to as it marked all plk l01 models in same option so any help with that ?
c185? are u using normal h7 or enhanced h7?
it is just normal but pakistan version i guess just region changes
and i managed to change it thanks to the tool and flashing whole c432 b100 update.app local and it worked >>now iam updating it to c432b121
TarekZeghost said:
and i managed to change it thanks to the tool and flashing whole c432 b100 update.app local and it worked >>now iam updating it to c432b121
Click to expand...
Click to collapse
I just unlocked bootloader yesterday, I change from PLK-L01C636B130 to PLK-L01C432B140.
What I do is I flash boot,cust,recovery,system of desired region firmware via fastboot. Then you flash FULL firmware the desired firmware via force update mode (power+volume up+vplume down). After finish, you can enjoy new firmware.
Goodluck !
lockmunk said:
I just unlocked bootloader yesterday, I change from PLK-L01C636B130 to PLK-L01C432B140.
What I do is I flash boot,cust,recovery,system of desired region firmware via fastboot. Then you flash FULL firmware the desired firmware via force update mode (power+volume up+vplume down). After finish, you can enjoy new firmware.
Goodluck !
Click to expand...
Click to collapse
well i was not aware of that and it seems much easier thanks.. i went through that because force update gave me error when using debranding method of the tool due to flashing wrong recovery img and the right one wasnot working on it just redownloading with no use
Related
I have ALE-L21 was running on C185B160 try to upgrade it to OFFICIAL MM6 6.0 but ended up with error installation failed i unpack the UPDATE.APP and manually flash RECOVRY.IMG.......CUST.IMG......BOOT.IMG......SYSTEM.IMG..... fastboot reboot...i can boot into recovery... but cant boot into system....stuck on huawei Logo.... My bootloader is unlocked... i can flash TWRP...and also can boot to twrp but how i can boot into system please help me... Please!t
pixel989 said:
I have ALE-L21 was running on C185B160 try to upgrade it to OFFICIAL MM6 6.0 but ended up with error installation failed i unpack the UPDATE.APP and manually flash RECOVRY.IMG.......CUST.IMG......BOOT.IMG......SYSTEM.IMG..... fastboot reboot...i can boot into recovery... but cant boot into system....stuck on huawei Logo.... My bootloader is unlocked... i can flash TWRP...and also can boot to twrp but how i can boot into system please help me... Please!t
Click to expand...
Click to collapse
Why did you create two threads asking the same issue? By the way which country does this phone belongs to? I think you downloaded the wrong file.
How can i know which country this phone belongs to?
pixel989 said:
How can i know which country this phone belongs to?
Click to expand...
Click to collapse
I live in Pakistan and I bought the phone here. So its region is Pakistan.
Suleiman01 said:
I live in Pakistan and I bought the phone here. So its region is Pakistan.
Click to expand...
Click to collapse
I bought it... From somebody else... used..!
pixel989 said:
I bought it... From somebody else... used..!
Click to expand...
Click to collapse
I assume your region is middle east. Huawei counts my country in middle east. My phone's build number is ALE-L21C185B560. Yours is similar so. I first upgraded to B525 middle east and then b560
B525
http://www.carbontesla.com/2016/06/download-huawei-p8-lite-b525-marshmallow-firmware/
B560
https://goo.gl/U5XYDx
Suleiman01 said:
I assume your region is middle east. Huawei counts my country in middle east. My phone's build number is ALE-L21C185B560. Yours is similar so. I first upgraded to B525 middle east and then b560
B525
http://www.carbontesla.com/2016/06/download-huawei-p8-lite-b525-marshmallow-firmware/
B560
https://goo.gl/U5XYDx
Click to expand...
Click to collapse
This is for dual sim?
pixel989 said:
This is for dual sim?
Click to expand...
Click to collapse
Yes. In fact both are for dual sim.
pixel989 said:
I have ALE-L21 was running on C185B160 try to upgrade it to OFFICIAL MM6 6.0 but ended up with error installation failed i unpack the UPDATE.APP and manually flash RECOVRY.IMG.......CUST.IMG......BOOT.IMG......SYSTEM.IMG..... fastboot reboot...i can boot into recovery... but cant boot into system....stuck on huawei Logo.... My bootloader is unlocked... i can flash TWRP...and also can boot to twrp but how i can boot into system please help me... Please!t
Click to expand...
Click to collapse
How did it go?
Not Solved!
Suleiman01 said:
How did it go?
Click to expand...
Click to collapse
I did everything. Flash with Asia Pacific firmware . even convert my phone with (oeminfo) to European then tried european firmware it always fail with (dload) method but it can be flashed with fastboot.... when i flashed Cust.img system.img boot.img recovery.img it goes well but the phone isn't booting... i have twrp installed i also can't flash custom rom... when i try flash a custom rom it ended up with an error..
But yes i can flash a custom rom with with fastboot with only two images (System.img) (Boot.img) the phone boots but everything Force close. And continues restart.. don't know what to do?
pixel989 said:
I did everything. Flash with Asia Pacific firmware . even convert my phone with (oeminfo) to European then tried european firmware it always fail with (dload) method but it can be flashed with fastboot.... when i flashed Cust.img system.img boot.img recovery.img it goes well but the phone isn't booting... i have twrp installed i also can't flash custom rom... when i try flash a custom rom it ended up with an error..
But yes i can flash a custom rom with with fastboot with only two images (System.img) (Boot.img) the phone boots but everything Force close. And continues restart.. don't know what to do?
Click to expand...
Click to collapse
You nowhere mentioned middle east and other channels firmware. For some reason Huawei counts some asian countries in middle east. Use B525 Triple button force update and see what happens.
My P9 Lite (VNS-L31) has the C900B114 firmware ever since I bought it and I can't get OTA updates. After searching around the forum for similar questions I came to the conclusion that I have to manually flash C432 firmware but I'm not that familiar with the whole process...
Do I have to unlock the phone's bootloader ? (That would also void the warranty, wouldn't it ?)
Or can I install a C432 firmware directly from my SD card with the menu that opens if you dial *#*#2846579#*#* ?
Thanks in advance .
MondoGenerator said:
My P9 Lite (VNS-L31) has the C900B114 firmware ever since I bought it and I can't get OTA updates. After searching around the forum for similar questions I came to the conclusion that I have to manually flash C432 firmware but I'm not that familiar with the whole process...
Do I have to unlock the phone's bootloader ? (That would also void the warranty, wouldn't it ?)
Or can I install a C432 firmware directly from my SD card with the menu that opens if you dial *#*#2846579#*#* ?
Thanks in advance .
Click to expand...
Click to collapse
You have to do the entire procedure for debranding your phone.
So: unlock bootloader + twrp + root + flash C432 oeminfo + repair firmware from dload folder with stock firmware C432B130/B160.
Yes, that will void warranty, but if all works smothly (some may works wrong - result bricked device...) you have a C432B130/B160 stock device (bootloader lock, stock recovery, unrouted).
gtdaniel said:
You have to do the entire procedure for debranding your phone.
So: unlock bootloader + twrp + root + flash C432 oeminfo + repair firmware from dload folder with stock firmware C432B130/B160.
Yes, that will void warranty, but if all works smothly (some may works wrong - result bricked device...) you have a C432B130/B160 stock device (bootloader lock, stock recovery, unrouted).
Click to expand...
Click to collapse
Thanks for the reply man
I'll try it out as soon as I can (I hope I won't brick my phone...)
Did it work?
MondoGenerator said:
Thanks for the reply man
I'll try it out as soon as I can (I hope I won't brick my phone...)
Click to expand...
Click to collapse
Im with the same issue. What happen with your problem at the end?
Hi there,
So i upgraded to emui 5(c432 version) europe version manually using twrp for emui 4.1 ( C432 because there was no c185 version which i needed because the c185 is the carrier unlocked version for Africa and i had Vodafone carrier locked (c02) software before and i wanted an unlocked version. this was before the ota came out for vns l31) but it wouldnt flash the data file, so i installed revolution recovery and flashed the data file. I experienced a bug where the phone wouldn't connect to my pc, it just charged. So i tried to flash different software (c185 had been released officially) but revolution recovery couldn't flash the update.app file and i accidentally flashed the emui 4.1 twrp and now my phone is soft bricked, please could i get some help as to which software to flash using dload that wont give error at 5%
http://ministryofsolutions.com/2017/01/huawei-p9-lite-vns-l31-bricked-nougat-update.html
check this guide,may work for you
P9liter said:
http://ministryofsolutions.com/2017/01/huawei-p9-lite-vns-l31-bricked-nougat-update.html
check this guide,may work for you
Click to expand...
Click to collapse
Thanks but remember my phone wont connect to my pc for some reason ???
I inadvertendly chose the wrong firmware in Firmware Finder & ended up with the NRD90M test keys (pretty bad that it's still on firmware finder causing mayhem)
because of this, all firmware loads are failing (presumably because the loader does a basic check to ensure the firmware being loaded matches the device type). So I need to put the phone back to the correct model ...so I dug around & found a zip file to do this (C432 oeminfo P9 lite-dual sim.zip) , but it's erroring when I install it with TWRP....
any ideas how I get out of this problem?
Ehm , dude , it installed successfully...
I guess the red text was throwing me!
drew_peacock said:
I inadvertendly chose the wrong firmware in Firmware Finder & ended up with the NRD90M test keys (pretty bad that it's still on firmware finder causing mayhem)
because of this, all firmware loads are failing (presumably because the loader does a basic check to ensure the firmware being loaded matches the device type). So I need to put the phone back to the correct model ...so I dug around & found a zip file to do this (C432 oeminfo P9 lite-dual sim.zip) , but it's erroring when I install it with TWRP....
any ideas how I get out of this problem?
Click to expand...
Click to collapse
Flash oeminfo c432 via twrp and flash b130 use three botton dload method
hello
today i updated my phone to G950FOXM3CRG1 using the ota update from here.
everything was fine until i decided to install TWRP
since than i got boot loop , so i tried to install full firmware from sammobile
i tried to install firmware with june path ( i cant fine full G950FOXM3CRG1 !!!!) and now my phone is stuck on " an error has...)
where can i find full G950FOXM3CRG1 or G950FOXM3CRG1 recovery ?
thanks !
lidor578 said:
hello
today i updated my phone to G950FOXM3CRG1 using the ota update from here.
everything was fine until i decided to install TWRP
since than i got boot loop , so i tried to install full firmware from sammobile
i tried to install firmware with june path ( i cant fine full G950FOXM3CRG1 !!!!) and now my phone is stuck on " an error has...)
where can i find full G950FOXM3CRG1 or G950FOXM3CRG1 recovery ?
thanks !
Click to expand...
Click to collapse
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Thor1964 said:
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Click to expand...
Click to collapse
thanks but i need stock recovery not twrp
now i cant install firmware from odin !!! its faild after 1 secend
lidor578 said:
now i cant install firmware from odin !!! its faild after 1 secend
Click to expand...
Click to collapse
you do not have root? This firmware can only be flashed with root.
wait a few days until the official firmware comes out
i do not have root
twrp destroyed my phone
what can i do so i could use it ?
lidor578 said:
i do not have root
twrp destroyed my phone
what can i do so i could use it ?
Click to expand...
Click to collapse
guess you have to wait until the official firmware from samsung comes out, then you can install the with odin.
I do not know any more, sorry
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
lidor578 said:
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
Click to expand...
Click to collapse
you use twrp without root ?? twrp = works only with root
lidor578 said:
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
Click to expand...
Click to collapse
You have already upgraded your bootloader to version 3. You cannot flash older firmware now. You will have to wait for an official CRG1 firmware to be released
Sent from my SM-G950F using Tapatalk
use samfirm and zto region manual mode !
And you will can download the fw, i did it yesterday because i was stuck on blue screen and cant flash earlier fw because i updated through twrp fw of CRG1
https://4pda.ru/forum/index.php?showtopic=819057&st=7220
Thor1964 said:
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Click to expand...
Click to collapse
coroneta said:
use samfirm and zto region manual mode !
And you will can download the fw, i did it yesterday because i was stuck on blue screen and cant flash earlier fw because i updated through twrp fw of CRG1
https://4pda.ru/forum/index.php?showtopic=819057&st=7220
Click to expand...
Click to collapse
when i use samfirm i can download all the versions exept the new !
when i tried i got this
Checking firmware for SM-G950F/ZTO/G950FXXS3CRG1 /G950FOXM3CRG1/G950FXXS3CRG1 /G950FXXS3CRG1
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
can you upload for me the full firmware ?
You have to put the region in manual mode and write the name of the fw like in the thread i linked before of 4pda.ru !
coroneta said:
You have to put the region in manual mode and write the name of the fw like in the thread i linked before of 4pda.ru !
Click to expand...
Click to collapse
i did it = the same error
This is why you create a back up
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
lidor578 said:
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
Click to expand...
Click to collapse
Installing twrp trips your Knox.
So you never be able to use secure folder, s health etc ...
Sent from my Samsung Galaxy S8 using XDA Labs
lidor578 said:
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
Click to expand...
Click to collapse
Don't know if still helps but some custom roms let you use s health an other apps that got locked by tripped knoxx but in regards to secure folder it's lost