Database Users

Stuck at "reboot to recovery" bootlogo after lollipop flash

i tried the bNL9 poland update via odin today, flashing was fine, but the device failed to boot after that. taking apart the battery and trying to get inside recovery failed on me too.
whats wrong with my process? do i have to manually flash the lollipop bootloader?

shohag2018 said:
i tried the bNL9 poland update via odin today, flashing was fine, but the device failed to boot after that. taking apart the battery and trying to get inside recovery failed on me too.
whats wrong with my process? do i have to manually flash the lollipop bootloader?
Click to expand...
Click to collapse
Try to manually flash modem and bootloader (BNL9)
GOOD LUCK

aguarello said:
Try to manually flash modem and bootloader (BNL9)
GOOD LUCK
Click to expand...
Click to collapse
the thought occurred to me as well, but im scared , if i fail to boot lollipop, theres a chance i ll even loose my boots in the native firmware as well ..
there is a chance i might loose it all.
i currently am able to boot all firmwares (different bootloader versions) for my country (hong kong).

finally booted up lollipop! did it with odin 3.07 this time. also over 4.4.2 tw rom.
was trying over an AOSP the first time around.

[HELP]System update failed [ANY FIRMWARE]

Hello, im here again with another "brick" which i cant fix by myself for one day. I was on beta firmware B313, but i decided to downgrade to B200, now, im bricked, i cant flash any firmware, everthing ends with error at 5 percents, recently i have B313 files (boot.img, recovery.img) because thats the only version i can boot into recovery from and its at least trying to boot into system, but after logo it restart. When i flash files from B170 or B200, it cant even boot into recovery, can anyone help?

00471 said:
Hello, im here again with another "brick" which i cant fix by myself for one day. I was on beta firmware B313, but i decided to downgrade to B200, now, im bricked, i cant flash any firmware, everthing ends with error at 5 percents, recently i have B313 files (boot.img, recovery.img) because thats the only version i can boot into recovery from and its at least trying to boot into system, but after logo it restart. When i flash files from B170 or B200, it cant even boot into recovery, can anyone help?
Click to expand...
Click to collapse
you had to first install the b300 downgrade file and then the B170 firmware. You can try to install it, it takes you to the version b300

caloger said:
you had to first install the b300 downgrade file and then the B170 firmware. You can try to install it, it takes you to the version b300
Click to expand...
Click to collapse
Thank you very much, it helped. Every tutorial to unbrick the phone mention only B200, not B300 first so i didnt know. Have a nice day.

change region

hi there ...
can i chang region of the mobile so i can recieve updates quickly ? iam plk l01 c185(b120) and want it to change to c432 eu instead>>
i noticed debranding option in honor 7 multi tool but i did not understand how to as it marked all plk l01 models in same option so any help with that ?

c185? are u using normal h7 or enhanced h7?

it is just normal but pakistan version i guess just region changes

and i managed to change it thanks to the tool and flashing whole c432 b100 update.app local and it worked >>now iam updating it to c432b121

TarekZeghost said:
and i managed to change it thanks to the tool and flashing whole c432 b100 update.app local and it worked >>now iam updating it to c432b121
Click to expand...
Click to collapse
I just unlocked bootloader yesterday, I change from PLK-L01C636B130 to PLK-L01C432B140.
What I do is I flash boot,cust,recovery,system of desired region firmware via fastboot. Then you flash FULL firmware the desired firmware via force update mode (power+volume up+vplume down). After finish, you can enjoy new firmware.
Goodluck !

lockmunk said:
I just unlocked bootloader yesterday, I change from PLK-L01C636B130 to PLK-L01C432B140.
What I do is I flash boot,cust,recovery,system of desired region firmware via fastboot. Then you flash FULL firmware the desired firmware via force update mode (power+volume up+vplume down). After finish, you can enjoy new firmware.
Goodluck !
Click to expand...
Click to collapse
well i was not aware of that and it seems much easier thanks.. i went through that because force update gave me error when using debranding method of the tool due to flashing wrong recovery img and the right one wasnot working on it just redownloading with no use

Yota flasher error : cannot open....

Hi guys, I want update my yotaphone 2 with yota flasher, but when I connect my phone to pc in download mode, yota flasher says: cannot open.... < every file name in rom folder>, and than: do you want to install userdata? Y/N.
Why yota flasher does'nt recognize rome files? I tried with Eu and Ru ROM, 4.4.3 and 5.0...
my build is KTU84L.4.4.3-S01-003-VIT.0.3.50a
Can you help me? Thanks.
Sorry for my english....

Hi, look here: http://forum.xda-developers.com/yotaphone-one/general/firmware-5-0-0-ru1-1-99-t3317338/page2

TKPL said:
Hi, look here: http://forum.xda-developers.com/yotaphone-one/general/firmware-5-0-0-ru1-1-99-t3317338/page2
Click to expand...
Click to collapse
so I have to install the TWRP and then install the rom?
< EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what.. >

ciccio1612 said:
so I have to install the TWRP and then install the rom?
< EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what.. >
Click to expand...
Click to collapse
guys can you help me ? I can not update my phone . I always lock at the same point . Give me some advice please.

Try to flash the first 4.4.3 EU you find on the Yotaphone ftp (I guess you have the Italian from Vidafone now... you have the VIT - Vodafone ITalia).
I flashed *only this* firmware without problems: if I try to flash directly the 5.0, all versions EU RU, I cannot.
When you have flashed the phone should boot and get the OTA to Lollipop 5.0 1.60EU. Some other guys here have flashed the 1.99 Russian without our problems

can someone upload full G950FOXM3CRG1 firmware or the new recovery ? got a problem

hello
today i updated my phone to G950FOXM3CRG1 using the ota update from here.
everything was fine until i decided to install TWRP
since than i got boot loop , so i tried to install full firmware from sammobile
i tried to install firmware with june path ( i cant fine full G950FOXM3CRG1 !!!!) and now my phone is stuck on " an error has...)
where can i find full G950FOXM3CRG1 or G950FOXM3CRG1 recovery ?
thanks !

lidor578 said:
hello
today i updated my phone to G950FOXM3CRG1 using the ota update from here.
everything was fine until i decided to install TWRP
since than i got boot loop , so i tried to install full firmware from sammobile
i tried to install firmware with june path ( i cant fine full G950FOXM3CRG1 !!!!) and now my phone is stuck on " an error has...)
where can i find full G950FOXM3CRG1 or G950FOXM3CRG1 recovery ?
thanks !
Click to expand...
Click to collapse
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html

Thor1964 said:
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Click to expand...
Click to collapse
thanks but i need stock recovery not twrp

now i cant install firmware from odin !!! its faild after 1 secend

lidor578 said:
now i cant install firmware from odin !!! its faild after 1 secend
Click to expand...
Click to collapse
you do not have root? This firmware can only be flashed with root.
wait a few days until the official firmware comes out

i do not have root
twrp destroyed my phone
what can i do so i could use it ?

lidor578 said:
i do not have root
twrp destroyed my phone
what can i do so i could use it ?
Click to expand...
Click to collapse
guess you have to wait until the official firmware from samsung comes out, then you can install the with odin.
I do not know any more, sorry

i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...

lidor578 said:
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
Click to expand...
Click to collapse
you use twrp without root ?? twrp = works only with root

lidor578 said:
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
Click to expand...
Click to collapse
You have already upgraded your bootloader to version 3. You cannot flash older firmware now. You will have to wait for an official CRG1 firmware to be released
Sent from my SM-G950F using Tapatalk

use samfirm and zto region manual mode !
And you will can download the fw, i did it yesterday because i was stuck on blue screen and cant flash earlier fw because i updated through twrp fw of CRG1
https://4pda.ru/forum/index.php?showtopic=819057&st=7220

Thor1964 said:
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Click to expand...
Click to collapse
coroneta said:
use samfirm and zto region manual mode !
And you will can download the fw, i did it yesterday because i was stuck on blue screen and cant flash earlier fw because i updated through twrp fw of CRG1
https://4pda.ru/forum/index.php?showtopic=819057&st=7220
Click to expand...
Click to collapse
when i use samfirm i can download all the versions exept the new !
when i tried i got this
Checking firmware for SM-G950F/ZTO/G950FXXS3CRG1 /G950FOXM3CRG1/G950FXXS3CRG1 /G950FXXS3CRG1
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
can you upload for me the full firmware ?

You have to put the region in manual mode and write the name of the fw like in the thread i linked before of 4pda.ru !

coroneta said:
You have to put the region in manual mode and write the name of the fw like in the thread i linked before of 4pda.ru !
Click to expand...
Click to collapse
i did it = the same error

This is why you create a back up

Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom

lidor578 said:
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
Click to expand...
Click to collapse
Installing twrp trips your Knox.
So you never be able to use secure folder, s health etc ...
Sent from my Samsung Galaxy S8 using XDA Labs

lidor578 said:
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
Click to expand...
Click to collapse
Don't know if still helps but some custom roms let you use s health an other apps that got locked by tripped knoxx but in regards to secure folder it's lost